| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Now orangefs_inode_getattr fills from cache if an inode has dirty pages.
also if attr_valid and dirty pages and !flags, we spin on inode writeback
before returning if pages still dirty after: should it be other way
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Remove orangefs_inode_read. It was used by readpage. Calling
wait_for_direct_io directly serves the purpose just as well. There is
now no check of the bufmap size in the readpage path. There are already
other places the bufmap size is assumed to be greater than PAGE_SIZE.
Important to call truncate_inode_pages now in the write path so a
subsequent read sees the new data.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
It's a copy of the loop which would run in read_pages from
mm/readahead.c.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
OrangeFS accepts a mask indicating which attributes were changed. The
kernel must not set any bits except those that were actually changed.
The kernel must set the uid/gid of the request to the actual uid/gid
responsible for the change.
Code path for notify_change initiated setattrs is
orangefs_setattr(dentry, iattr)
-> __orangefs_setattr(inode, iattr)
In kernel changes are initiated by calling __orangefs_setattr.
Code path for writeback is
orangefs_write_inode
-> orangefs_inode_setattr
attr_valid and attr_uid and attr_gid change together under i_lock.
I_DIRTY changes separately.
__orangefs_setattr
lock
if needs to be cleaned first, unlock and retry
set attr_valid
copy data in
unlock
mark_inode_dirty
orangefs_inode_setattr
lock
copy attributes out
unlock
clear getattr_time
# __writeback_single_inode clears dirty
orangefs_inode_getattr
# possible to get here with attr_valid set and not dirty
lock
if getattr_time ok or attr_valid set, unlock and return
unlock
do server operation
# another thread may getattr or setattr, so check for that
lock
if getattr_time ok or attr_valid, unlock and return
else, copy in
update getattr_time
unlock
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
This is a fairly big change, but ultimately it's not a lot of code.
Implement write_inode and then avoid the call to orangefs_inode_setattr
within orangefs_setattr.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
This should be a no-op now. When inode writeback works, this will
prevent a getattr from overwriting inode data while an inode is
transitioning to dirty.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
This should be a no-op now, but once inode writeback works, it'll be
necessary to have the correct attribute in the dirty inode.
Previously the attribute fetch timeout was marked invalid and the server
provided the updated attribute. When the inode is dirty, the server
cannot be consulted since it does not yet know the pending setattr.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
No need to store the received mask. It is either STATX_BASIC_STATS or
STATX_BASIC_STATS & ~STATX_SIZE. If STATX_SIZE is requested, the cache
is bypassed anyway, so the cached mask is unnecessary to decide whether
to do a real getattr.
This is a change. Previously a getattr would want size and use the
cached size. All of the in-kernel callers that wanted size did not want
a cached size. Now a getattr cannot use the cached size if it wants
size at all.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
When an inode is created, we fetch attributes from the server. There is
no need to turn around and invalidate them.
No need to initialize attributes after the getattr either. Either it'll
be exactly the same, or it'll be something else and wrong.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
This uses the same timeout as the getattr cache. This substantially
increases performance when writing files with smaller buffer sizes.
When writing, the size is (often) changed, which causes a call to
notify_change which calls security_inode_need_killpriv which needs a
getxattr. Caching it reduces traffic to the server.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Allow the boot CPU/CPU0 to be nohz_full. Have the boot CPU take the
do_timer duty during boot until a housekeeping CPU can take over.
This is supported when CONFIG_PM_SLEEP_SMP is not configured, or when
it is configured and the arch allows suspend on non-zero CPUs.
nohz_full has been trialed at a large supercomputer site and found to
significantly reduce jitter. In order to deploy it in production, they
need CPU0 to be nohz_full because their job control system requires
the application CPUs to start from 0, and the housekeeping CPUs are
placed higher. An equivalent job scheduling that uses CPU0 for
housekeeping could be achieved by modifying their system, but it is
preferable if nohz_full can support their environment without
modification.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-6-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
During housekeeping mask setup, currently a possible CPU is required.
That does not guarantee the CPU would be available at boot time, so
check to ensure that at least one present CPU is in the mask.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-5-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to
opt-in to allowing suspend to occur on one of the housekeeping CPUs
rather than hardcoded CPU0.
This will allow CPU0 to be a nohz_full CPU with a later change.
It may be possible for platforms with hardware/firmware restrictions
on suspend/wake effectively support this by handing off the final
stage to CPU0 when kernel housekeeping is no longer required. Another
option is to make housekeeping / nohz_full mask dynamic at runtime,
but the complexity could not be justified at this time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-4-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This adds a function to disable secondary CPUs for suspend that are
not necessarily non-zero / non-boot CPUs. Platforms will be able to
use this to suspend using non-zero CPUs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-3-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If a clk has specified parents via clk_hw pointers it won't specify the
globally unique names for the parents. Without the unique names, we
can't fallback to comparing them against the name of the 'parent'
pointer here. Therefore, do a pointer comparison against the clk_hw
pointers too and cache the clk_core structure if they match. This fixes
parent lookup code for clks that only specify clk_hw pointers and
nothing else, like muxes that are purely inside a clk controller.
Similarly, if the parent pointer isn't cached after trying to match
clk_core or clk_hw pointers, lookup the pointer from DT or via clkdev
lookups instead of relying purely on the globally unique clk name match.
This should allow us to move away from having to specify global names
for clk parents entirely.
While we're in the area, add some comments so it's clearer what's going
on. The if statements don't lend themselves to much clarity in their raw
form.
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The operations of pfdv2 gate_bit/valid_bit are incorrect,
they are defined as u8 for bit offset, but gate_bit is
actually assigned as mask which could be 32 bit long and
it causes overflow, and vld_bit is assigned as bit offset
based on incorrect gate_bit value, it causes incorrect
pfd clock gate status in clock tree, this patch fixes the
issue by assigning them as correct bit offset.
Fixes: 9fcb6be3b6c9 ("clk: imx: add pfdv2 support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add driver code for the SiFive FU540 PRCI IP block. This IP block
handles reset and clock control for the SiFive FU540 device and
implements SoC-level clock tree controls and dividers.
Based on code written by Wesley Terpstra <wesley@sifive.com>:
https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
Boot and PLL rate change were tested on a SiFive HiFive Unleashed
board.
This version includes several changes requested by Stephen Boyd
<sboyd@kernel.org>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Wesley W. Terpstra <wesley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Megan Wachs <megan@sifive.com>
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-clk@vger.kernel.org
[sboyd@kernel.org: Fix some const and ARRAY_SIZE() issues, make makefile
only descend if CLK_SIFIVE=y]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP
block, as implemented in TSMC CLN28HPC.
There is no bus interface or register target associated with this PLL.
This library is intended to be used by drivers for IP blocks that
expose registers connected to the PLL configuration and status
signals.
Based on code originally written by Wesley Terpstra
<wesley@sifive.com>:
https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
This version incorporates several changes requested by Stephen
Boyd <sboyd@kernel.org>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Wesley Terpstra <wesley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Megan Wachs <megan@sifive.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
[sboyd@kernel.org: Fix some const issues]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Now that we have a way to switch between MSC buffer windows, add code to
track the current window. The hardware register NWSA that contains the
address of the next window is unfortunately not always usable, and since
the driver has full control of the window switching, there is no reason
not to keep this on the software side.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that we have the means to trigger a window switch for the MSU trace
store, add a sysfs file to allow triggering it from userspace.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In multi window mode the MSU will set "window wrap" bit to indicate block
wrapping as well. Take this into account when checking data blocks.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for asserting window switch trigger when tracing to MSU output
ports. This allows for software controlled switching between windows of
the MSU buffer, which can be used for double buffering while exporting the
trace data further from the MSU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The trace enable/disable functions of the GTH include the code that starts
and stops trace flom from the sources. This start/stop functionality will
also be used in the window switch trigger sequence.
Factor out start/stop code from the larger trace enable/disable code in
preparation for the window switch sequence.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code that waits for the pipeline empty condition of the MSU is
currently called in the path that disables the trace. We will also
need this in the window switch trigger sequence. Therefore, factor
out this code and make it accessible to the GTH device.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of using a home-grown array of pointers to the DMA pages, switch
over to scatterlist data types and accessors, which has all the convenient
accessors, can be used to batch-map DMA memory and is convenient for
passing around between different layers, which will be useful when MSU
buffer management has to cross the boundaries of the MSU driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a few places in the code where open-coded versions of list entry
accessors list_first_entry()/list_last_entry()/list_next_entry() are used.
Replace those with the standard macros.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The only type of IRQ triggering event that is useful to us at the moment
is the "last block" interrupt of the MSU. This interrupt can only be
enabled via "MINTCTL" register that doesn't exist in earlier version of
the Intel TH.
Enumerate the presence of MINTCTL via per-device driver data structure
and only instantiate the IRQ resource for subdevices if this capability
is present.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We intend to use the interrupt to detect Last Block condition in the MSU
driver, which we can use for double-buffering software-managed data
transfers.
Add an interrupt handler to the MSU driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since Intel TH is capable of MSI interrupt signalling, make use of it.
The way it works is, each of the 7 interrupt triggering events has its
own vector in this mode, as opposed to interrupt line delivery, where
all events are signalled via the same line. Failing to enable MSI, the
driver falls back to using an interrupt line.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the IRQ is passed between the glue layers and the core as a
separate argument, while the MMIO resources are passed as resources.
This also limits the number of IRQs thus used to one, while the current
versions of Intel TH use a different MSI vector for each interrupt
triggering event, of which there are 7.
Change this to pass IRQ in the resources array.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some versions of Intel TH, the Software Trace Hub (STH) has a second
MMIO BAR dedicated to the input from Intel PT. This calls for a new
subdevice that will be enumerated if the corresponding BAR is present.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a subdevice requires an MMIO region that wasn't in the resources passed
down from the glue layer, don't instantiate it, but don't error out. This
means that that particular subdevice doesn't exist for this instance of
Intel TH, which is a perfectly normal situation. This applies, for example,
to the "rtit" source device.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, MMIO resource numbers in the TH driver core correspond to
PCI BAR numbers, because in the beginning there was only the PCI glue
layer. This created some confusion when the ACPI glue layer was added.
To avoid confusion and remove glue-specific code from the driver core,
split the resource indices between core and glue layers and change the
API so that the driver core receives the MMIO resources in the same
fixed order. At the same time, make the IRQ always be a parameter to
intel_th_alloc() instead of sometimes passing it as a resource.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the SPDX header to the Intel TH documentation.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the pages that are allocated for the single mode of MSC are not
mapped into the device's dma space and the code is incorrectly using
*_to_phys() in place of a dma address. This fails with IOMMU enabled and
is otherwise bad practice.
Fix the single mode buffer allocation to map the pages into the device's
DMA space.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: ba82664c134e ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull drm fix from Dave Airlie:
"Just a single qxl revert"
* tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/qxl: drop prime import/export callbacks"
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-next
Johan writes:
GNSS updates for 5.2-rc1
Here are the GNSS updates for 5.2-rc1; only a new u-blox compatible.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'gnss-5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
gnss: ubx: add u-blox,neo-6m compatible
dt-bindings: gnss: add u-blox,neo-6m compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.2 merge window
With a total of 50 non-merge commits, this is not a large pull
request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%)
with the rest of it scattered among other UDCs, function drivers and
device-tree bindings.
No really big feature this time around apart from support to Amlogic
being added to both dwc3 and dwc2 drivers.
* tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits)
usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
usb: dwc3: Fix default lpm_nyet_threshold value
usb: dwc3: debug: Print GET_STATUS(device) tracepoint
usb: dwc3: Do core validation early on probe
usb: dwc3: gadget: Set lpm_capable
usb: gadget: atmel: tie wake lock to running clock
usb: gadget: atmel: support USB suspend
usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
dwc2: gadget: Fix completed transfer size calculation in DDMA
usb: dwc2: Set lpm mode parameters depend on HW configuration
usb: dwc2: Fix channel disable flow
usb: dwc2: Set actual frame number for completed ISOC transfer
usb: gadget: do not use __constant_cpu_to_le16
usb: dwc2: gadget: Increase descriptors count for ISOC's
usb: introduce usb_ep_type_string() function
usb: dwc3: move synchronize_irq() out of the spinlock protected block
usb: dwc3: Free resource immediately after use
usb: dwc3: of-simple: Convert to bulk clk API
usb: dwc2: Delayed status support
usb: gadget: udc: lpc32xx: rework interrupt handling
...
|
|
We need this to make the usb-gadget branch merge cleaner. And for
testing to keep from hitting the same issues already fixed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/clk/imx/clk-pllv3.c: In function ‘imx_clk_pllv3’:
drivers/clk/imx/clk-pllv3.c:446:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
pll->div_shift = 1;
~~~~~~~~~~~~~~~^~~
drivers/clk/imx/clk-pllv3.c:447:2: note: here
case IMX_PLLV3_USB:
^~~~
drivers/clk/imx/clk-pllv3.c:453:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
^
drivers/clk/imx/clk-pllv3.c:454:2: note: here
case IMX_PLLV3_AV:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b4a4cb5a0454 ("clk: imx: correct i.MX7D AV PLL num/denom offset")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.2-rc1
Here are the USB-serial updates for 5.2-rc1, including:
- flow-control related fixes for pl2303
- fix for an initial-termios issue
- fix for a couple of unthrottle() races
- fix for f81232 interrupt-handling issues
- improved f81232 overrun handling
- support for higher f81232 line speeds
- support for f81232 break control
Included are also various clean ups.
All but the last four commits have been in linux-next and with no
reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (22 commits)
USB: serial: f81232: implement break control
USB: serial: f81232: add high baud rate support
USB: serial: f81232: clear overrun flag
USB: serial: f81232: fix interrupt worker not stop
USB: serial: io_edgeport: fix up switch fall-through comments
USB: serial: drop unused iflag macro
USB: serial: drop unnecessary goto
USB: serial: clean up throttle handling
USB: serial: fix unthrottle races
USB: serial: spcp8x5: simplify init_termios
USB: serial: oti6858: simplify init_termios
USB: serial: iuu_phoenix: simplify init_termios
USB: serial: iuu_phoenix: drop bogus initial cflag
USB: serial: cypress_m8: clean up initial-termios handling
USB: serial: cypress_m8: drop unused termios
USB: serial: cypress_m8: drop unused driver data flag
USB: serial: ark3116: drop redundant init_termios
USB: serial: fix initial-termios handling
USB: serial: digi_acceleport: clean up set_termios
USB: serial: digi_acceleport: clean up modem-control handling
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for
clkdev where we forgot to hold a lock while iterating a list that can
change, and finally a build fix that adds some stubs for clk APIs that
are used by devfreq drivers on platforms without the clk APIs"
* tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Add missing stubs for a few functions
clkdev: Hold clocks_mutex while iterating clocks list
clk: sunxi-ng: nkmp: Explain why zero width check is needed
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few stable fixes at this round.
The USB Line6 audio fixes are a bit large, but they are rather trivial
and pretty much device-specific, so should be safe to apply at this
late stage. Ditto for other HD-audio quirks"
* tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR
ALSA: line6: use dynamic buffers
ALSA: hda/realtek - Fixed Dell AIO speaker noise
ALSA: hda/realtek - Add new Dell platform for headset mode
|
|
If alloc_pages_node() fails, pasid_table is leaked. Free it.
Fixes: cc580e41260db ("iommu/vt-d: Per PCI device pasid table interfaces")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The kernel parameter igfx_off is used by users to disable
DMA remapping for the Intel integrated graphic device. It
was designed for bare metal cases where a dedicated IOMMU
is used for graphic. This doesn't apply to virtual IOMMU
case where an include-all IOMMU is used. This makes the
kernel parameter work with virtual IOMMU as well.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The intel_iommu_gfx_mapped flag is exported by the Intel
IOMMU driver to indicate whether an IOMMU is used for the
graphic device. In a virtualized IOMMU environment (e.g.
QEMU), an include-all IOMMU is used for graphic device.
This flag is found to be clear even the IOMMU is used.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
check if there is a not-present cache present and flush it if there is.
Signed-off-by: Tom Murphy <tmurphy@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
