| Age | Commit message (Collapse) | Author |
|---|
|
A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.
The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com
Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Co-developed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When a TID sequence error occurs while receiving TID RDMA READ RESP
packets, all packets after flow->flow_state.r_next_psn should be dropped,
including those response packets for subsequent segments.
The current implementation will drop the subsequent response packets for
the segment to complete next, but may accept packets for subsequent
segments and therefore mistakenly advance the r_next_psn fields for the
corresponding software flows. This may result in failures to complete
subsequent segments after the current segment is completed.
The fix is to only use the flow pointed by req->clear_tail for checking
KDETH PSN instead of finding a flow from the request's flow array.
Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The field flow->resync_npkts is added for TID RDMA WRITE request and
zero-ed when a TID RDMA WRITE RESP packet is received by the requester.
This field is used to rewind a request during retry in the function
hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA
READ requests. Therefore, when a TID RDMA READ request is retried, this
field may not be initialized at all, which causes the retry to start at an
incorrect psn, leading to the drop of the retry request by the responder.
This patch fixes the problem by zeroing out the field when the flow memory
is allocated.
Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When an OPFN request is flushed, the request is completed without
unreserving itself from the send queue. Subsequently, when a new
request is post sent, the following warning will be triggered:
WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt]
Call Trace:
[<ffffffffbbb61e41>] dump_stack+0x19/0x1b
[<ffffffffbb497688>] __warn+0xd8/0x100
[<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20
[<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt]
[<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0
[<ffffffffbb61d645>] ? __kmalloc+0x55/0x230
[<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs]
[<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs]
[<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs]
[<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0
[<ffffffffbb641650>] vfs_write+0xc0/0x1f0
[<ffffffffbb64246f>] SyS_write+0x7f/0xf0
[<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27
This patch fixes the problem by moving rvt_qp_wqe_unreserve() into
rvt_qp_complete_swqe() to simplify the code and make it less
error-prone.
Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed")
Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The call to alloc_rsm_map_table does not check if the kmalloc fails.
Check for a NULL on alloc, and bail if it fails.
Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS")
Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
dpu encoder spinlock should be initialized during dpu encoder
init instead of dpu encoder setup which is part of modeset init.
Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org>
[seanpaul resolved conflict in old init removal and revised the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org
|
|
When run perftest in many times, the system will report a BUG as follows:
BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1
BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1
We tested with different kernel version and found it started from the the
following commit:
commit d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in
SGEs")
In this commit, the sg->offset is always 0 when sg_set_page() is called in
ib_umem_get() and the drivers are not allowed to change the sgl, otherwise
it will get bad page descriptor when unfolding SGEs in __ib_umem_release()
as sg_page_count() will get wrong result while sgl->offset is not 0.
However, there is a weird sgl usage in the current hns driver, the driver
modified sg->offset after calling ib_umem_get(), which caused we iterate
past the wrong number of pages in for_each_sg_page iterator.
This patch fixes it by correcting the non-standard sgl usage found in the
hns_roce_db_map_user() function.
Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Correct attempted NULL pointer dereference in context_init() when
running without an IOMMU.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 295b22ae596c ("drm/msm: Pass the MMU domain index in struct msm_file_private")
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627020515.5660-1-masneyb@onstation.org
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20190718092710.85709-1-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preemption Kconfig fix from Thomas Gleixner:
"The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined
PREEMPT outside of the menu and made it selectable by both PREEMPT_LL
and PREEMPT_RT.
Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which
obviously can't work anymore. oldconfig builds are affected as well,
but it's more obvious as the user gets asked. [old]defconfig silently
fixes it up and selects PREEMPT_NONE.
Unbreak it by undoing the rename and adding a intermediate config
symbol which is selected by both PREEMPT and PREEMPT_RT. That requires
to chase down a few #ifdefs, but it's better than tweaking 114
defconfigs and annoying users"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd polling fix from Christian Brauner:
"A fix for pidfd polling. It ensures that the task's exit state is
visible to all waiters"
* tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
pidfd: fix a poll race when setting exit_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes for leaks caused by recently merged patches
- one build fix
- a fix to prevent mixing of incompatible features
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't leak extent_map in btrfs_get_io_geometry()
btrfs: free checksum hash on in close_ctree
btrfs: Fix build error while LIBCRC32C is module
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
|
|
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to
CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y
set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on
the preemption mode choice wich defaults to NONE. This also affects
oldconfig builds.
So rather than changing 114 defconfig files and being an annoyance to
users, revert the rename and select a new config symbol PREEMPTION. That
keeps everything working smoothly and the revelant ifdef's are going to be
fixed up step by step.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For two regressions in media core:
- v4l2-subdev: fix regression in check_pad()
- videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already
in use"
* tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use
media: v4l2-subdev: fix regression in check_pad()
|
|
Commit dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode
DMAR table internals") prints content of pasid table entries from LSB to
MSB where as other entries are printed MSB to LSB. So, to maintain
uniformity among all entries and to not confuse the user, print MSB first.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Fixes: dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Following specification review a few things were changed in v8 of the
virtio-iommu series [1], but have been omitted when merging the base
driver. Add them now:
* Remove the EXEC flag.
* Add feature bit for the MMIO flag.
* Change domain_bits to domain_range.
* Add NOMEM status flag.
[1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker@arm.com/
Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
|
|
Since the cached32_node is allowed to be advanced above dma_32bit_pfn
(to provide a shortcut into the limited range), we need to be careful to
remove the to be freed node if it is the cached32_node.
[ 48.477773] BUG: KASAN: use-after-free in __cached_rbnode_delete_update+0x68/0x110
[ 48.477812] Read of size 8 at addr ffff88870fc19020 by task kworker/u8:1/37
[ 48.477843]
[ 48.477879] CPU: 1 PID: 37 Comm: kworker/u8:1 Tainted: G U 5.2.0+ #735
[ 48.477915] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 48.478047] Workqueue: i915 __i915_gem_free_work [i915]
[ 48.478075] Call Trace:
[ 48.478111] dump_stack+0x5b/0x90
[ 48.478137] print_address_description+0x67/0x237
[ 48.478178] ? __cached_rbnode_delete_update+0x68/0x110
[ 48.478212] __kasan_report.cold.3+0x1c/0x38
[ 48.478240] ? __cached_rbnode_delete_update+0x68/0x110
[ 48.478280] ? __cached_rbnode_delete_update+0x68/0x110
[ 48.478308] __cached_rbnode_delete_update+0x68/0x110
[ 48.478344] private_free_iova+0x2b/0x60
[ 48.478378] iova_magazine_free_pfns+0x46/0xa0
[ 48.478403] free_iova_fast+0x277/0x340
[ 48.478443] fq_ring_free+0x15a/0x1a0
[ 48.478473] queue_iova+0x19c/0x1f0
[ 48.478597] cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[ 48.478712] __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[ 48.478826] __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[ 48.478940] __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[ 48.479053] __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[ 48.479081] ? __sg_free_table+0x9e/0xf0
[ 48.479116] ? kfree+0x7f/0x150
[ 48.479234] i915_vma_unbind+0x1e2/0x240 [i915]
[ 48.479352] i915_vma_destroy+0x3a/0x280 [i915]
[ 48.479465] __i915_gem_free_objects+0xf0/0x2d0 [i915]
[ 48.479579] __i915_gem_free_work+0x41/0xa0 [i915]
[ 48.479607] process_one_work+0x495/0x710
[ 48.479642] worker_thread+0x4c7/0x6f0
[ 48.479687] ? process_one_work+0x710/0x710
[ 48.479724] kthread+0x1b2/0x1d0
[ 48.479774] ? kthread_create_worker_on_cpu+0xa0/0xa0
[ 48.479820] ret_from_fork+0x1f/0x30
[ 48.479864]
[ 48.479907] Allocated by task 631:
[ 48.479944] save_stack+0x19/0x80
[ 48.479994] __kasan_kmalloc.constprop.6+0xc1/0xd0
[ 48.480038] kmem_cache_alloc+0x91/0xf0
[ 48.480082] alloc_iova+0x2b/0x1e0
[ 48.480125] alloc_iova_fast+0x58/0x376
[ 48.480166] intel_alloc_iova+0x90/0xc0
[ 48.480214] intel_map_sg+0xde/0x1f0
[ 48.480343] i915_gem_gtt_prepare_pages+0xb8/0x170 [i915]
[ 48.480465] huge_get_pages+0x232/0x2b0 [i915]
[ 48.480590] ____i915_gem_object_get_pages+0x40/0xb0 [i915]
[ 48.480712] __i915_gem_object_get_pages+0x90/0xa0 [i915]
[ 48.480834] i915_gem_object_prepare_write+0x2d6/0x330 [i915]
[ 48.480955] create_test_object.isra.54+0x1a9/0x3e0 [i915]
[ 48.481075] igt_shared_ctx_exec+0x365/0x3c0 [i915]
[ 48.481210] __i915_subtests.cold.4+0x30/0x92 [i915]
[ 48.481341] __run_selftests.cold.3+0xa9/0x119 [i915]
[ 48.481466] i915_live_selftests+0x3c/0x70 [i915]
[ 48.481583] i915_pci_probe+0xe7/0x220 [i915]
[ 48.481620] pci_device_probe+0xe0/0x180
[ 48.481665] really_probe+0x163/0x4e0
[ 48.481710] device_driver_attach+0x85/0x90
[ 48.481750] __driver_attach+0xa5/0x180
[ 48.481796] bus_for_each_dev+0xda/0x130
[ 48.481831] bus_add_driver+0x205/0x2e0
[ 48.481882] driver_register+0xca/0x140
[ 48.481927] do_one_initcall+0x6c/0x1af
[ 48.481970] do_init_module+0x106/0x350
[ 48.482010] load_module+0x3d2c/0x3ea0
[ 48.482058] __do_sys_finit_module+0x110/0x180
[ 48.482102] do_syscall_64+0x62/0x1f0
[ 48.482147] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.482190]
[ 48.482224] Freed by task 37:
[ 48.482273] save_stack+0x19/0x80
[ 48.482318] __kasan_slab_free+0x12e/0x180
[ 48.482363] kmem_cache_free+0x70/0x140
[ 48.482406] __free_iova+0x1d/0x30
[ 48.482445] fq_ring_free+0x15a/0x1a0
[ 48.482490] queue_iova+0x19c/0x1f0
[ 48.482624] cleanup_page_dma.isra.64+0x62/0xb0 [i915]
[ 48.482749] __gen8_ppgtt_cleanup+0x63/0x80 [i915]
[ 48.482873] __gen8_ppgtt_cleanup+0x42/0x80 [i915]
[ 48.482999] __gen8_ppgtt_clear+0x433/0x4b0 [i915]
[ 48.483123] __gen8_ppgtt_clear+0x462/0x4b0 [i915]
[ 48.483250] i915_vma_unbind+0x1e2/0x240 [i915]
[ 48.483378] i915_vma_destroy+0x3a/0x280 [i915]
[ 48.483500] __i915_gem_free_objects+0xf0/0x2d0 [i915]
[ 48.483622] __i915_gem_free_work+0x41/0xa0 [i915]
[ 48.483659] process_one_work+0x495/0x710
[ 48.483704] worker_thread+0x4c7/0x6f0
[ 48.483748] kthread+0x1b2/0x1d0
[ 48.483787] ret_from_fork+0x1f/0x30
[ 48.483831]
[ 48.483868] The buggy address belongs to the object at ffff88870fc19000
[ 48.483868] which belongs to the cache iommu_iova of size 40
[ 48.483920] The buggy address is located 32 bytes inside of
[ 48.483920] 40-byte region [ffff88870fc19000, ffff88870fc19028)
[ 48.483964] The buggy address belongs to the page:
[ 48.484006] page:ffffea001c3f0600 refcount:1 mapcount:0 mapping:ffff8888181a91c0 index:0x0 compound_mapcount: 0
[ 48.484045] flags: 0x8000000000010200(slab|head)
[ 48.484096] raw: 8000000000010200 ffffea001c421a08 ffffea001c447e88 ffff8888181a91c0
[ 48.484141] raw: 0000000000000000 0000000000120012 00000001ffffffff 0000000000000000
[ 48.484188] page dumped because: kasan: bad access detected
[ 48.484230]
[ 48.484265] Memory state around the buggy address:
[ 48.484314] ffff88870fc18f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 48.484361] ffff88870fc18f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 48.484406] >ffff88870fc19000: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
[ 48.484451] ^
[ 48.484494] ffff88870fc19080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 48.484530] ffff88870fc19100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108602
Fixes: e60aa7b53845 ("iommu/iova: Extend rbtree node caching")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull networking fixes from David Miller:
1) Several netfilter fixes including a nfnetlink deadlock fix from
Florian Westphal and fix for dropping VRF packets from Miaohe Lin.
2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore
proper block sharing.
3) Fix r8169 PHY init from Thomas Voegtle.
4) Fix memory leak in mac80211, from Lorenzo Bianconi.
5) Missing NULL check on object allocation in cxgb4, from Navid
Emamdoost.
6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn.
7) Check that there is actually an ip header to access in skb->data in
VRF, from Peter Kosyh.
8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang.
9) One more tweak the the TCP fragmentation memory limit changes, to be
less harmful to applications setting small SO_SNDBUF values. From
Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
tcp: be more careful in tcp_fragment()
hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()
vrf: make sure skb->data contains ip header to make routing
connector: remove redundant input callback from cn_dev
qed: Prefer pcie_capability_read_word()
igc: Prefer pcie_capability_read_word()
cxgb4: Prefer pcie_capability_read_word()
be2net: Synchronize be_update_queues with dev_watchdog
bnx2x: Prevent load reordering in tx completion processing
net: phy: sfp: hwmon: Fix scaling of RX power
net: sched: verify that q!=NULL before setting q->flags
chelsio: Fix a typo in a function name
allocate_flower_entry: should check for null deref
net: hns3: typo in the name of a constant
kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.
tipc: Fix a typo
mac80211: don't warn about CW params when not using them
mac80211: fix possible memory leak in ieee80211_assign_beacon
nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
nl80211: fix VENDOR_CMD_RAW_DATA
...
|
|
There is a couple of places where on domain_init() failure domain_exit()
is called. While currently domain_init() can fail only if
alloc_pgtable_page() has failed.
Make domain_exit() check if domain->pgd present, before calling
domain_unmap(), as it theoretically should crash on clearing pte entries
in dma_pte_clear_level().
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Intel VT-d driver was reworked to use common deferred flushing
implementation. Previously there was one global per-cpu flush queue,
afterwards - one per domain.
Before deferring a flush, the queue should be allocated and initialized.
Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush
queue. It's probably worth to init it for static or unmanaged domains
too, but it may be arguable - I'm leaving it to iommu folks.
Prevent queuing an iova flush if the domain doesn't have a queue.
The defensive check seems to be worth to keep even if queue would be
initialized for all kinds of domains. And is easy backportable.
On 4.19.43 stable kernel it has a user-visible effect: previously for
devices in si domain there were crashes, on sata devices:
BUG: spinlock bad magic on CPU#6, swapper/0/1
lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1
Call Trace:
<IRQ>
dump_stack+0x61/0x7e
spin_bug+0x9d/0xa3
do_raw_spin_lock+0x22/0x8e
_raw_spin_lock_irqsave+0x32/0x3a
queue_iova+0x45/0x115
intel_unmap+0x107/0x113
intel_unmap_sg+0x6b/0x76
__ata_qc_complete+0x7f/0x103
ata_qc_complete+0x9b/0x26a
ata_qc_complete_multiple+0xd0/0xe3
ahci_handle_port_interrupt+0x3ee/0x48a
ahci_handle_port_intr+0x73/0xa9
ahci_single_level_irq_intr+0x40/0x60
__handle_irq_event_percpu+0x7f/0x19a
handle_irq_event_percpu+0x32/0x72
handle_irq_event+0x38/0x56
handle_edge_irq+0x102/0x121
handle_irq+0x147/0x15c
do_IRQ+0x66/0xf2
common_interrupt+0xf/0xf
RIP: 0010:__do_softirq+0x8c/0x2df
The same for usb devices that use ehci-pci:
BUG: spinlock bad magic on CPU#0, swapper/0/1
lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4
Call Trace:
<IRQ>
dump_stack+0x61/0x7e
spin_bug+0x9d/0xa3
do_raw_spin_lock+0x22/0x8e
_raw_spin_lock_irqsave+0x32/0x3a
queue_iova+0x77/0x145
intel_unmap+0x107/0x113
intel_unmap_page+0xe/0x10
usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d
usb_hcd_unmap_urb_for_dma+0x17/0x100
unmap_urb_for_dma+0x22/0x24
__usb_hcd_giveback_urb+0x51/0xc3
usb_giveback_urb_bh+0x97/0xde
tasklet_action_common.isra.4+0x5f/0xa1
tasklet_action+0x2d/0x30
__do_softirq+0x138/0x2df
irq_exit+0x7d/0x8b
smp_apic_timer_interrupt+0x10f/0x151
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: <stable@vger.kernel.org> # 4.14+
Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Comparing the arm-arm's pseudocode for AArch64.PCAlignmentFault() with
AArch64.SPAlignmentFault() shows that SP faults don't copy the faulty-SP
to FAR_EL1, but this is where we read from, and the address we provide
to user-space with the BUS_ADRALN signal.
For user-space this value will be UNKNOWN due to the previous ERET to
user-space. If the last value is preserved, on systems with KASLR or KPTI
this will be the user-space link-register left in FAR_EL1 by tramp_exit().
Fix this to retrieve the original sp_el0 value, and pass this to
do_sp_pc_fault().
SP alignment faults from EL1 will cause us to take the fault again when
trying to store the pt_regs. This eventually takes us to the overflow
stack. Remove the ESR_ELx_EC_SP_ALIGN check as we will never make it
this far.
Fixes: 60ffc30d5652 ("arm64: Exception handling")
Signed-off-by: James Morse <james.morse@arm.com>
[will: change label name and fleshed out comment]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Lots of comments bitrotted. Fix them up.
Fixes: 418a3ab1e778 (mm/balloon_compaction: List interfaces)
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Nadav Amit <namit@vmware.com>
|
|
A #GP is reported in the guest when requesting balloon inflation via
virtio-balloon. The reason is that the virtio-balloon driver has
removed the page from its internal page list (via balloon_page_pop),
but balloon_page_enqueue_one also calls "list_del" to do the removal.
This is necessary when it's used from balloon_page_enqueue_list, but
not from balloon_page_enqueue.
Move list_del to balloon_page_enqueue, and update comments accordingly.
Fixes: 418a3ab1e778 (mm/balloon_compaction: List interfaces)
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As we have abandoned the home-made lazy domain allocation
and delegated the DMA domain life cycle up to the default
domain mechanism defined in the generic iommu layer, we
needn't consider pci alias anymore when mapping/unmapping
the context entries. Without this fix, we see kernel NULL
pointer dereference during pci device hot-plug test.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
On a CPU that doesn't support SSBS, PSTATE[12] is RES0. In a system
where only some of the CPUs implement SSBS, we end-up losing track of
the SSBS bit across task migration.
To address this issue, let's force the SSBS bit on context switch.
Fixes: 8f04e8e6e29c ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[will: inverted logic and added comments]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit 123b2ffc376e1b3e9e015c75175b61e88a8b8518.
This commit reportedly caused boot failures on some systems
and needs to be reverted for now.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
memory malloced in bch_cached_dev_run() and should be freed before
leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes: 0b13efecf5f2 ("bcache: add return value check to bch_cached_dev_run()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a race between reading task->exit_state in pidfd_poll and
writing it after do_notify_parent calls do_notify_pidfd. Expected
sequence of events is:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
tsk->exit_state = EXIT_DEAD
pidfd_poll
if (tsk->exit_state)
However nothing prevents the following sequence:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
pidfd_poll
if (tsk->exit_state)
tsk->exit_state = EXIT_DEAD
This causes a polling task to wait forever, since poll blocks because
exit_state is 0 and the waiting task is not notified again. A stress
test continuously doing pidfd poll and process exits uncovered this bug.
To fix it, we make sure that the task's exit_state is always set before
calling do_notify_pidfd.
Fixes: b53b0b9d9a6 ("pidfd: add polling support")
Cc: kernel-team@android.com
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org
[christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie]
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Update MAINTAINERS and .mailmap with my @linaro.org address, since I
don't have access to my @arm.com address anymore.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Picking up 7aaddd96d5f ("drm/modes: Don't apply cmdline's rotation if it wasn't specified")
from drm-misc-next-fixes. It missed the merge window.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
When a pin is active-low, logical trigger edge should be inverted to match
the same interrupt opportunity.
For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in
ACTIVE_LOW case, the button pushed triggers rising edge. For user space the
IRQ requesting doesn't need to do any modification except to configuring
GPIOHANDLE_REQUEST_ACTIVE_LOW.
For example, we want to catch the event when the button is pushed. The
button on the original board drives level to be low when it is pushed, and
drives level to be high when it is released.
In user space we can do:
req.handleflags = GPIOHANDLE_REQUEST_INPUT;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
while (1) {
read(fd, &dat, sizeof(dat));
if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE)
printf("button pushed\n");
}
Run the same logic on another board which the polarity of the button is
inverted; it drives level to be high when pushed, and level to be low when
released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW:
req.handleflags = GPIOHANDLE_REQUEST_INPUT |
GPIOHANDLE_REQUEST_ACTIVE_LOW;
req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE;
At the result, there are no any events caught when the button is pushed.
By the way, button releasing will emit a "falling" event. The timing of
"falling" catching is not expected.
Cc: stable@vger.kernel.org
Signed-off-by: Michael Wu <michael.wu@vatics.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
While using the mmc_spi driver occasionally errors like this popped up:
mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 581756
I looked on the Internet for occurrences of the same problem and came
across a helpful post [1]. It includes source code to reproduce the bug.
There is also an analysis about the cause. During transmission data in the
supplied buffer is being modified. Thus the previously calculated checksum
is not correct anymore.
After some digging I found out that device drivers are supposed to report
they need stable writes. To fix this I set the appropriate flag at queue
initialization if CRC checksumming is enabled for that SPI host.
[1]
https://groups.google.com/forum/#!msg/sim1/gLlzWeXGFr8/KevXinUXfc8J
Signed-off-by: Andreas Koop <andreas.koop@zf.com>
[shihpo: Rebase on top of v5.3-rc1]
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
CC: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In some cases initial bind of scm memory for an lpar can fail if
previously it wasn't released using a scm-unbind hcall. This situation
can arise due to panic of the previous kernel or forced lpar
fadump. In such cases the H_SCM_BIND_MEM return a H_OVERLAP error.
To mitigate such cases the patch updates papr_scm_probe() to force a
call to drc_pmem_unbind() in case the initial bind of scm memory fails
with EBUSY error. In case scm-bind operation again fails after the
forced scm-unbind then we follow the existing error path. We also
update drc_pmem_bind() to handle the H_OVERLAP error returned by phyp
and indicate it as a EBUSY error back to the caller.
Suggested-by: "Oliver O'Halloran" <oohall@gmail.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-4-vaibhav@linux.ibm.com
|
|
The new hcall named H_SCM_UNBIND_ALL has been introduce that can
unbind all or specific scm memory assigned to an lpar. This is
more efficient than using H_SCM_UNBIND_MEM as currently we don't
support partial unbind of scm memory.
Hence this patch proposes following changes to drc_pmem_unbind():
* Update drc_pmem_unbind() to replace hcall H_SCM_UNBIND_MEM to
H_SCM_UNBIND_ALL.
* Update drc_pmem_unbind() to handles cases when PHYP asks the guest
kernel to wait for specific amount of time before retrying the
hcall via the 'LONG_BUSY' return value.
* Ensure appropriate error code is returned back from the function
in case of an error.
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-3-vaibhav@linux.ibm.com
|
|
Update the hvcalls.h to include op-codes for new hcalls introduce to
manage SCM memory. Also update existing hcall definitions to reflect
current papr specification for SCM.
The removed hcall op-codes H_SCM_MEM_QUERY, H_SCM_BLOCK_CLEAR were
transient proposals and there support was never implemented by
Power-VM nor they were used anywhere in Linux kernel. Hence we don't
expect anyone to be impacted by this change.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-2-vaibhav@linux.ibm.com
|
|
My @arm.com address will stop working in a couple of weeks. Update
MAINTAINERS and .mailmap files with an address I'll have access to.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix a typo in my name for the KVM-ARM reviewers entry.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
I will soon lose access to my @arm.com email address, so let's
update the MAINTAINERS file to point to my @kernel.org address,
as well as .mailmap for good measure.
Note that my @arm.com address will still work, but someone else
will be reading whatever is sent there. Don't say you didn't know!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic
Meson8 and Meson8b SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after
response errors.") we fixed a tuning-induced hang that I saw when
stress testing tuning on certain SD cards. I won't re-hash that whole
commit, but the summary is that as a normal part of tuning you need to
deal with transfer errors and there were cases where these transfer
errors was putting my system into a bad state causing all future
transfers to fail. That commit fixed handling of the transfer errors
for me.
In downstream Chrome OS my fix landed and had the same behavior for
all SD/MMC commands. However, it looks like when the commit landed
upstream we limited it to only SD tuning commands. Presumably this
was to try to get around problems that Alim Akhtar reported on exynos
[1].
Unfortunately while stress testing reboots (and suspend/resume) on
some rk3288-based Chromebooks I found the same problem on the eMMC on
some of my Chromebooks (the ones with Hynix eMMC). Since the eMMC
tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
same situation.
I'm hoping that whatever problems exynos was having in the past are
somehow magically fixed now and we can make the behavior the same for
all commands.
[1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com
Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Alim Akhtar <alim.akhtar@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When the SD host controller tries to probe again due to the derferred
probe mechanism, it will always keep the SD host device as runtime
resume state due to missing the runtime put operation in error path
last time.
Thus add the pm_runtime_put_noidle() in error path to make the PM runtime
counter balance, which can make the SD host device's PM runtime work well.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://people.freedesktop.org/~gabbayo/linux into char-misc-linux
Oded writes:
This tag contains the following fixes:
- Fix to VRHOT event handling from the ASIC. No need to reset the ASIC,
just notify it in dmesg.
- Fix printk specifier for printing dma address
* tag 'misc-habanalabs-fixes-2019-07-22' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
|
|
Shall help finding use-after-free bugs earlier.
Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After reverting commit 240c35a3783a (kvm: x86: Use task structs fpu field
for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3)
is the order at which allocations are deemed costly to service. In serveless
scenario, one host can service hundreds/thoudands firecracker/kata-container
instances, howerver, new instance will fail to launch after memory is too
fragmented to allocate kvm_vcpu struct on host, this was observed in some
cloud provider product environments.
This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my
Skylake server.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The idea before commit 240c35a37 (which has just been reverted)
was that we have the following FPU states:
userspace (QEMU) guest
---------------------------------------------------------------------------
processor vcpu->arch.guest_fpu
>>> KVM_RUN: kvm_load_guest_fpu
vcpu->arch.user_fpu processor
>>> preempt out
vcpu->arch.user_fpu current->thread.fpu
>>> preempt in
vcpu->arch.user_fpu processor
>>> back to userspace
>>> kvm_put_guest_fpu
processor vcpu->arch.guest_fpu
---------------------------------------------------------------------------
With the new lazy model we want to get the state back to the processor
when schedule in from current->thread.fpu.
Reported-by: Thomas Lambertz <mail@thomaslambertz.de>
Reported-by: anthony <antdev66@gmail.com>
Tested-by: anthony <antdev66@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Lambertz <mail@thomaslambertz.de>
Cc: anthony <antdev66@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 5f409e20b (x86/fpu: Defer FPU state load until return to userspace)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Add a comment in front of the warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This reverts commit 240c35a3783ab9b3a0afaba0dde7291295680a6b
("kvm: x86: Use task structs fpu field for user", 2018-11-06).
The commit is broken and causes QEMU's FPU state to be destroyed
when KVM_RUN is preempted.
Fixes: 240c35a3783a ("kvm: x86: Use task structs fpu field for user")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Letting this pend may cause nested_get_vmcs12_pages to run against an
invalid state, corrupting the effective vmcs of L1.
This was triggerable in QEMU after a guest corruption in L2, followed by
a L1 reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 7f7f1ba33cf2 ("KVM: x86: do not load vmcs12 pages while still in SMM")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This helper is required from generic huge_pte_alloc() which is available
when arch subscribes ARCH_WANT_GENERAL_HUGETLB. arm64 implements it's own
huge_pte_alloc() and does not depend on the generic definition. Drop this
helper which is redundant on arm64.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Steve Capper <Steve.Capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are some hand-written instances of "32" to express the number
of SVE Z-registers.
Since this code was written a #define was added for this, so
convert trivial instances of this magic number as appropriate.
No functional change.
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we convert from FPSIMD to SVE register state in memory in
two places.
To ease future maintenance, let's consolidate this in one place.
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
