| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use RNG seed from bootinfo block on virt platform
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.19-rc1
m68k: Add common forward declaration for show_registers()
m68k: mac: Remove forward declaration for mac_nmi_handler()
m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()
m68k: virt: Use RNG seed from bootinfo block
m68k: bitops: Change __fls to return and accept unsigned long
m68k: Kconfig.machine: Add endif comment
m68k: Kconfig.debug: Replace single quotes
m68k: Kconfig.cpu: Fix indentation and add endif comments
m68k: q40: Align '*' in comments
m68k: sun3: Use __func__ to get function's name in an output message
m68k: mac: Fix typos in comments
m68k: virt: Kconfig minor fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump updates from Borislav Petkov:
- Add the ability to pass early an RNG seed to the kernel from the boot
loader
- Add the ability to pass the IMA measurement of kernel and bootloader
to the kexec-ed kernel
* tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use rng seeds from setup_data
x86/kexec: Carry forward IMA measurement log on kexec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Fix stack protector builds when cross compiling with Clang
- Other Kbuild improvements and fixes
* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Omit use of bin2c
x86/purgatory: Hard-code obj-y in Makefile
x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Have invalid MSR accesses warnings appear only once after a
pr_warn_once() change broke that
- Simplify {JMP,CALL}_NOSPEC and let the objtool retpoline patching
infra take care of them instead of having unreadable alternative
macros there
* tag 'x86_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Fix ex_handler_msr() print condition
x86,nospec: Simplify {JMP,CALL}_NOSPEC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add a bunch of PCI IDs for new AMD CPUs and use them in k10temp
- Free the pmem platform device on the registration error path
* tag 'x86_misc_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp): Add support for new family 17h and 19h models
x86/amd_nb: Add AMD PCI IDs for SMN communication
x86/pmem: Fix platform-device leak in error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Remove the vendor check when selecting MWAIT as the default idle
state
- Respect idle=nomwait when supplied on the kernel cmdline
- Two small cleanups
* tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use MSR_IA32_MISC_ENABLE constants
x86: Fix comment for X86_FEATURE_ZEN
x86: Remove vendor checks from prefer_mwait_c1_over_halt
x86: Handle idle=nomwait cmdline properly for x86_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu update from Borislav Petkov:
- Add machinery to initialize AMX register state in order for
AMX-capable CPUs to be able to enter deeper low-power state
* tag 'x86_fpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Add a new flag to initialize the AMX state
x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Rename a PKRU macro to make more sense when reading the code
- Update pkeys documentation
- Avoid reading contended mm's TLB generation var if not absolutely
necessary along with fixing a case where arch_tlbbatch_flush()
doesn't adhere to the generation scheme and thus violates the
conditions for the above avoidance.
* tag 'x86_mm_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/tlb: Ignore f->new_tlb_gen when zero
x86/pkeys: Clarify PKRU_AD_KEY macro
Documentation/protection-keys: Clean up documentation for User Space pkeys
x86/mm/tlb: Avoid reading mm_tlb_gen when possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanup from Borislav Petkov:
- A single CONFIG_ symbol correction in a comment
* tag 'x86_cleanups_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Refer to the intended config STRICT_DEVMEM in a comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware cleanup from Borislav Petkov:
- A single statement simplification by using the BIT() macro
* tag 'x86_vmware_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Use BIT() macro for shifting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
"A single RAS change:
- Probe whether hardware error injection (direct MSR writes) is
possible when injecting errors on AMD platforms. In some cases, the
platform could prohibit those"
* tag 'ras_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check whether writes to MCA_STATUS are getting ignored
|
|
The commit 649cab56de8e (“of: properly check for error returned
by fdt_get_name()”) changed the return value type from bool to int,
but forgot to change the return value simultaneously.
populate_node was only called in unflatten_dt_nodes, and returns
with values greater than or equal to 0 were discarded without further
processing. Considering that return 0 usually indicates success,
return 0 instead of return true.
Fixes: 649cab56de8e (“of: properly check for error returned by fdt_get_name()”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801120506.11461-2-xuqiang36@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull acl updates from Christian Brauner:
"Last cycle we introduced support for mounting overlayfs on top of
idmapped mounts. While looking into additional testing we realized
that posix acls don't really work correctly with stacking filesystems
on top of idmapped layers.
We already knew what the fix were but it would require work that is
more suitable for the merge window so we turned off posix acls for
v5.19 for overlayfs on top of idmapped layers with Miklos routing my
patch upstream in 72a8e05d4f66 ("Merge tag 'ovl-fixes-5.19-rc7' [..]").
This contains the work to support posix acls for overlayfs on top of
idmapped layers. Since the posix acl fixes should use the new
vfs{g,u}id_t work the associated branch has been merged in. (We sent a
pull request for this earlier.)
We've also pulled in Miklos pull request containing my patch to turn
of posix acls on top of idmapped layers. This allowed us to avoid
rebasing the branch which we didn't like because we were already at
rc7 by then. Merging it in allows this branch to first fix posix acls
and then to cleanly revert the temporary fix it brought in by commit
4a47c6385bb4 ("ovl: turn of SB_POSIXACL with idmapped layers
temporarily").
The last patch in this series adds Seth Forshee as a co-maintainer for
idmapped mounts. Seth has been integral to all of this work and is
also the main architect behind the filesystem idmapping work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to help and he has my full trust. This
increases the bus factor which is always great for work like this. I'm
honestly very excited about this because I think in general we don't
do great in the bringing on new maintainers department"
For more explanations of the ACL issues, see
https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org/
* tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
Add Seth Forshee as co-maintainer for idmapped mounts
Revert "ovl: turn of SB_POSIXACL with idmapped layers temporarily"
ovl: handle idmappings in ovl_get_acl()
acl: make posix_acl_clone() available to overlayfs
acl: port to vfs{g,u}id_t
acl: move idmapped mount fixup into vfs_{g,s}etxattr()
mnt_idmapping: add vfs[g,u]id_into_k[g,u]id()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs idmapping updates from Christian Brauner:
"This introduces the new vfs{g,u}id_t types we agreed on. Similar to
k{g,u}id_t the new types are just simple wrapper structs around
regular {g,u}id_t types.
They allow to establish a type safety boundary in the VFS for idmapped
mounts preventing confusion betwen {g,u}ids mapped into an idmapped
mount and {g,u}ids mapped into the caller's or the filesystem's
idmapping.
An initial set of helpers is introduced that allows to operate on
vfs{g,u}id_t types. We will remove all references to non-type safe
idmapped mounts helpers in the very near future. The patches do
already exist.
This converts the core attribute changing codepaths which become
significantly easier to reason about because of this change.
Just a few highlights here as the patches give detailed overviews of
what is happening in the commit messages:
- The kernel internal struct iattr contains type safe vfs{g,u}id_t
values clearly communicating that these values have to take a given
mount's idmapping into account.
- The ownership values placed in struct iattr to change ownership are
identical for idmapped and non-idmapped mounts going forward. This
also allows to simplify stacking filesystems such as overlayfs that
change attributes In other words, they always represent the values.
- Instead of open coding checks for whether ownership changes have
been requested and an actual update of the inode is required we now
have small static inline wrappers that abstract this logic away
removing a lot of code duplication from individual filesystems that
all open-coded the same checks"
* tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mnt_idmapping: align kernel doc and parameter order
mnt_idmapping: use new helpers in mapped_fs{g,u}id()
fs: port HAS_UNMAPPED_ID() to vfs{g,u}id_t
mnt_idmapping: return false when comparing two invalid ids
attr: fix kernel doc
attr: port attribute changes to new types
security: pass down mount idmapping to setattr hook
quota: port quota helpers mount ids
fs: port to iattr ownership update helpers
fs: introduce tiny iattr ownership update helpers
fs: use mount types in iattr
fs: add two type safe mapping helpers
mnt_idmapping: add vfs{g,u}id_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of flock() patches from Kuniyuki Iwashima.
The main change is that this moves a file_lock allocation from the
slab to the stack"
* tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs/lock: Rearrange ops in flock syscall.
fs/lock: Don't allocate file_lock in flock_make_lock().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"First of all, we'd like to add Yue Hu and Jeffle Xu as two new
reviewers. Thank them for spending time working on EROFS!
There is no major feature outstanding in this cycle, mainly a patchset
I worked on to prepare for rolling hash deduplication and folios for
compressed data as the next big features. It kills the unneeded
PG_error flag dependency as well.
Apart from that, there are bugfixes and cleanups as always. Details
are listed below:
- Add Yue Hu and Jeffle Xu as reviewers
- Add the missing wake_up when updating lzma streams
- Avoid consecutive detection for Highmem memory
- Prepare for multi-reference pclusters and get rid of PG_error
- Fix ctx->pos update for NFS export
- minor cleanups"
* tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (23 commits)
erofs: update ctx->pos for every emitted dirent
erofs: get rid of the leftover PAGE_SIZE in dir.c
erofs: get rid of erofs_prepare_dio() helper
erofs: introduce multi-reference pclusters (fully-referenced)
erofs: record the longest decompressed size in this round
erofs: introduce z_erofs_do_decompressed_bvec()
erofs: try to leave (de)compressed_pages on stack if possible
erofs: introduce struct z_erofs_decompress_backend
erofs: get rid of `z_pagemap_global'
erofs: clean up `enum z_erofs_collectmode'
erofs: get rid of `enum z_erofs_page_type'
erofs: rework online page handling
erofs: switch compressed_pages[] to bufvec
erofs: introduce `z_erofs_parse_in_bvecs'
erofs: drop the old pagevec approach
erofs: introduce bufvec to store decompressed buffers
erofs: introduce `z_erofs_parse_out_bvecs()'
erofs: clean up z_erofs_collector_begin()
erofs: get rid of unneeded `inode', `map' and `sb'
erofs: avoid consecutive detection for Highmem memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- support for FAN_MARK_IGNORE which untangles some of the not well
defined corner cases with fanotify ignore masks
- small cleanups
* tag 'fsnotify_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix comment typo
fanotify: introduce FAN_MARK_IGNORE
fanotify: cleanups for fanotify_mark() input validations
fanotify: prepare for setting event flags in ignore mask
fs: inotify: Fix typo in inotify comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 and reiserfs updates from Jan Kara:
"A fix for ext2 handling of a corrupted fs image and cleanups in ext2
and reiserfs"
* tag 'fs_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add more validity checks for inode counts
fs/reiserfs/inode: remove dead code in _get_block_create_0()
fs/ext2: replace ternary operator with min_t()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Delay the cleanup of interrupted posix lock requests until the user
space result arrives. Previously, the immediate cleanup would lead to
extraneous warnings when the result arrived.
- Tracepoint improvements, e.g. adding the lock resource name.
- Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
- Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
- Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to remove
the code in v6.2.
* tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: move kref_put assert for lkb structs
fs: dlm: don't use deprecated timeout features by default
fs: dlm: add deprecation Kconfig and warnings for timeouts
fs: dlm: remove timeout from dlm_user_adopt_orphan
fs: dlm: remove waiter warnings
fs: dlm: fix grammar in lowcomms output
fs: dlm: add comment about lkb IFL flags
fs: dlm: handle recovery result outside of ls_recover
fs: dlm: make new_lockspace() wait until recovery completes
fs: dlm: call dlm_lsop_recover_prep once
fs: dlm: update comments about recovery and membership handling
fs: dlm: add resource name to tracepoints
fs: dlm: remove additional dereference of lksb
fs: dlm: change ast and bast trace order
fs: dlm: change posix lock sigint handling
fs: dlm: use dlm_plock_info for do_unlock_close
fs: dlm: change plock interrupted message to debug again
fs: dlm: add pid to debug log
fs: dlm: plock use list_first_entry
|
|
Correct all uses of "it's" that are meant to be possessive "its".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801025221.30563-1-rdunlap@infradead.org
|
|
The local status variables in intel_vsec_pci_error_detected()
and intel_vsec_pci_slot_reset() should have pci_ers_result_t as type
(and not pci_channel_state_t).
Also fix a whitespace error as well as intel_vsec_pci_err_handlers not
being marked static.
This fixes the following sparse errors:
drivers/platform/x86/intel/vsec.c:429:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:429:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:429:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:434:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:434:24: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:434:24: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:438:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:444:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:457:16: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:457:16: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:457:16: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:472:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:480:33: sparse: sparse: symbol 'intel_vsec_pci_err_handlers' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: David E Box <david.e.box@intel.com>
Cc: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220801145536.172410-1-hdegoede@redhat.com
|
|
The unhold_lkb() function decrements the lock's kref, and
asserts that the ref count was not the final one. Use the
kref_put release function (which should not be called) to
call the assert, rather than doing the assert based on the
kref_put return value. Using kill_lkb() as the release
function doesn't make sense if we only want to assert.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Convert emac_rockchip.txt to YAML.
Changes against original bindings:
Add mdio sub node.
Add extra clock for rk3036
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220603163539.537-1-jbx6244@gmail.com
|
|
The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems superfluous.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220718145328.14374-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
review-hans
Immutable branch between MFD, EDAC, I2C, LEDs, PinCtrl, Platform and Watchdog due for the v5.20 merge window
|
|
rseq_abi()->flags and rseq_abi()->rseq_cs->flags 29 upper bits are
currently unused.
The current behavior when those bits are set is to ignore them. This is
not an ideal behavior, because when future features will start using
those flags, if user-space fails to correctly validate that the kernel
indeed supports those flags (e.g. with a new sys_rseq flags bit) before
using them, it may incorrectly assume that the kernel will handle those
flags way when in fact those will be silently ignored on older kernels.
Validating that unused flags bits are cleared will allow a smoother
transition when those flags will start to be used by allowing
applications to fail early, and obviously, when they attempt to use the
new flags on an older kernel that does not support them.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20220622194617.1155957-2-mathieu.desnoyers@efficios.com
|
|
The pretty much unused RSEQ_CS_FLAG_NO_RESTART_ON_* flags introduce
complexity in rseq, and are subtly buggy [1]. Solving those issues
requires introducing additional complexity in the rseq implementation
for each supported architecture.
Considering that it complexifies the rseq ABI, I am proposing that we
deprecate those flags. [2]
So far there appears to be consensus from maintainers of user-space
projects impacted by this feature that its removal would be a welcome
simplification. [3]
The deprecation approach proposed here is to issue WARN_ON_ONCE() when
encountering those flags and kill the offending process with sigsegv.
This should allow us to quickly identify whether anyone yells at us for
removing this.
Link: https://lore.kernel.org/lkml/20220618182515.95831-1-minhquangbui99@gmail.com/ [1]
Link: https://lore.kernel.org/lkml/258546133.12151.1655739550814.JavaMail.zimbra@efficios.com/ [2]
Link: https://lore.kernel.org/lkml/87pmj1enjh.fsf@email.froward.int.ebiederm.org/ [3]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/lkml/20220622194617.1155957-1-mathieu.desnoyers@efficios.com
|
|
kvm_hypercall has to place the hypercall number in rax.
Trace events show that kvm_pv_test doesn't work properly:
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
With this change, it starts working as expected:
kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0
Signed-off-by: Andrei Vagin <avagin@google.com>
Message-Id: <20220722230241.1944655-5-avagin@google.com>
Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The only sensible exponent for a boolean stat is 0. Add a test assertion
requiring all boolean statistics to have an exponent of 0.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As it turns out, tests sometimes fail. When that is the case, packing
the test assertion with as much relevant information helps track down
the problem more quickly.
Sharpen up the stat descriptor assertions in kvm_binary_stats_test to
more precisely describe the reason for the test assertion and which
stat is to blame.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In order to provide more useful test assertions that describe the broken
stats descriptor, perform sanity check on the stat name before any other
descriptor field. While at it, avoid dereferencing the name field if the
sanity check fails as it is more likely to contain garbage.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Dimitris Michailidis says:
====================
net/funeth: Tx support for XDP with frags
Support XDP with fragments for XDP_TX and ndo_xdp_xmit.
The first three patches rework existing code used by the skb path to
make it suitable also for XDP. With these all the callees of the main
Tx XDP function, fun_xdp_tx(), are fragment-capable. The last patch
updates fun_xdp_tx() to handle fragments.
====================
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By now all the functions fun_xdp_tx() calls are shared with the skb path
and thus are fragment-capable. Update fun_xdp_tx(), that up to now has
been passing just one buffer, to check for fragments and call
accordingly. This makes XDP_TX and ndo_xdp_xmit fragment-capable.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of passing an skb to the mapping function pass an
skb_shared_info plus an additional address/length pair. This makes it
usable for both skbs and XDP. Call it from the XDP path and adjust the
skb path.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract the Tx gather list writing code that skbs use into a utility
function and use it also for XDP.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current XDP unmapping is a subset of its skb analog, dealing with
only one buffer. In preparation for multi-frag XDP rename the skb
function and use it also for XDP. The XDP version is removed.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last use of 'pfn' went away with the same-named argument to
host_pfn_mapping_level; now that the hugepage level is obtained
exclusively from the host page tables, kvm_mmu_zap_collapsible_spte
does not need to know host pfns at all.
Fixes: a8ac499bb6ab ("KVM: x86/mmu: Don't require refcounted "struct page" to create huge SPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Jiri Pirko says:
====================
net: devlink: allow parallel commands on multiple devlinks
Aim of this patchset is to remove devlink_mutex and eventually to enable
parallel ops on devlink netlink interface.
====================
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the devlink_mutex was removed and all devlink instances are protected
individually by devlink->lock mutex, allow the netlink ops to run
in parallel and therefore allow user to execute commands on multiple
devlink instances simultaneously.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All accesses to devlink structure from userspace and drivers are locked
with devlink->lock instance mutex. Also, devlinks xa_array iteration is
taken care of by iteration helpers taking devlink reference.
Therefore, remove devlink_mutex as it is no longer needed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert reload command to behave the same way as the rest of the
commands and let if be called with devlink->lock held. Remove the
temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK
flag is no longer used, remove it alongside.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
iteration
Add new mark called "unregistering" to be set at the beginning of
devlink_unregister() function. Check this mark during devlinks
iteration in order to prevent getting a reference of devlink which is
being currently unregistered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__udp_sysctl_init() is called for init_net via udp_sysctl_ops.
While at it, we can rename __udp_sysctl_init() to udp_sysctl_init().
Fixes: 1e8029515816 ("udp: Move the udp sysctl to namespace.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-29
This series contains updates to iavf driver only.
Przemyslaw prevents setting of TC max rate below minimum supported values
and reports updated queue values when setting up TCs.
---
v2: Dropped patch 3 (hw-tc-offload check)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If 'local_odp_mr->r_trans_private' is a error code,
it is better to print the error code than to print
the value of IS_ERR().
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-31
this is a pull request of 36 patches for net-next/master.
The 1st patch is by me and fixes a typo in the mcp251xfd driver.
Vincent Mailhol contributes a series of 9 patches, which clean up the
drivers to make use of KBUILD_MODNAME instead of hard coded names and
remove DRV_VERSION.
Followed by 3 patches by Vincent Mailhol that directly set the
ethtool_ops in instead of calling a function in the slcan, c_can and
flexcan driver.
Vincent Mailhol contributes a KBUILD_MODNAME and pr_fmt cleanup patch
for the slcan driver. Dario Binacchi contributes 6 patches to clean up
the driver and remove the legacy driver infrastructure.
The next 14 patches are by Vincent Mailhol and target the various
drivers, they add ethtool support and reporting of timestamping
capabilities.
Another patch by Vincent Mailhol for the etas_es58x driver to remove
useless calls to usb_fill_bulk_urb().
The last patch is by Christophe JAILLET and fixes a broken link to
Documentation in the can327 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.20:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
|
