Age | Commit message (Collapse) | Author |
|
Passive scanning is used to program the address of the peer to be
synchronized, so once HCI_EV_LE_PA_SYNC_ESTABLISHED is received it
needs to be updated after clearing HCI_PA_SYNC then call
hci_update_passive_scan_sync to return it to its original state.
Fixes: 6d0417e4e1cf ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
list_empty(&hdev->adv_instances) is always true during startup,
so an advertising instance is added by default.
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
hci_setup_ext_adv_instance_sync+0x17c/0x328
hci_powered_update_adv_sync+0xb4/0x12c
hci_powered_update_sync+0x54/0x70
hci_power_on_sync+0xe4/0x278
hci_set_powered_sync+0x28/0x34
set_powered_sync+0x40/0x58
hci_cmd_sync_work+0x94/0x100
process_one_work+0x168/0x444
worker_thread+0x378/0x3f4
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Link: https://github.com/bluez/bluez/issues/1442
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- tegra: Ensure pmc power-domains are in a known state
* tag 'pmdomain-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
soc/tegra: pmc: Ensure power-domains are in a known state
|
|
Pull smb client fixes from Steve French:
- Fix unlink race and rename races
- SMB3.1.1 compression fix
- Avoid unneeded strlen calls in cifs_get_spnego_key
- Fix slab out of bounds in parse_server_interfaces()
- Fix mid leak and server buffer leak
- smbdirect send error path fix
- update internal version #
- Fix unneeded response time update in negotiate protocol
* tag '6.17-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: remove redundant lstrp update in negotiate protocol
cifs: update internal version number
smb: client: don't wait for info->send_pending == 0 on error
smb: client: fix mid_q_entry memleak leak with per-mid locking
smb3: fix for slab out of bounds on mount to ksmbd
cifs: avoid extra calls to strlen() in cifs_get_spnego_key()
cifs: Fix collect_sample() to handle any iterator type
smb: client: fix race with concurrent opens in rename(2)
smb: client: fix race with concurrent opens in unlink(2)
|
|
Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.
The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).
The scenario unfolds as follows:
1. A group leader event is configured with a very aggressive sampling
period (e.g., sample_period = 1). This causes frequent interrupts and
triggers the throttling mechanism.
2. A child event in the same group is created in a disabled state
(.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
initialized at -1.
3. When throttling occurs, perf_event_throttle_group() and later
perf_event_unthrottle_group() iterate through all siblings, including
the disabled child event.
4. perf_event_throttle()/unthrottle() are called on this inactive child
event, which then call event->pmu->start()/stop().
5. The PMU driver receives the event with hw.idx == -1 and attempts to
use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
leading to the UBSAN report.
The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.
Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.
The problem can be reproduced with the syzkaller reproducer:
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com
|
|
Sparse reported a warning:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:305:47:
sparse: expected restricted __le64
sparse: got unsigned long long
Add cpu_to_le64() to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508142105.Jb5Smjsg-lkp@intel.com/
Suggested-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250814193039.2265813-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length.
Reported-by: Simcha Kosman <simcha.kosman@cyberark.com>
Closes: https://lore.kernel.org/all/AS8P193MB2271C4B24BCEDA31830F37AE84A52@AS8P193MB2271.EURP193.PROD.OUTLOOK.COM
Fixes: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/20250804154023.work.970-kees@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID to support Intel Wildcat Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250812130259.109645-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer.
While at it, on failure, return ERR_CAST(dp) instead of
ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc()
error code implementation.
Fixes: 48f05c3b4b70 ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
|
|
struct mempool doesn't currently exist, and thus also isn't used in
fnic.h, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250812082808.371119-1-hch@lst.de
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This fixes a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure
that handlers which may call schedule() are invoked safely outside of
the critical section"
* tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered
firewire: core: call FCP address handlers outside RCU read-side critical section
firewire: core: call handler for exclusive regions outside RCU read-side critical section
firewire: core: use reference counting to invoke address handlers safely
|
|
make clean does not check the kernel config when removing files. As
such, additions to clean-files under CONFIG_ARM or CONFIG_ARM64 are not
evaluated. For example, when building on arm64, this means that
lib/crypto/arm64/sha{256,512}-core.S are left over after make clean.
Set clean-files unconditionally to ensure that make clean removes these
files.
Fixes: e96cb9507f2d ("lib/crypto: sha256: Consolidate into single module")
Fixes: 24c91b62ac50 ("lib/crypto: arm/sha512: Migrate optimized SHA-512 code to library")
Fixes: 60e3f1e9b7a5 ("lib/crypto: arm64/sha512: Migrate optimized SHA-512 code to library")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://lore.kernel.org/r/20250814-crypto_clean-v2-1-659a2dc86302@columbia.edu
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Update the help text for CRYPTO_LIB_SHA1 and CRYPTO_LIB_SHA256 to
reflect the addition of HMAC support, and to be consistent with
CRYPTO_LIB_SHA512.
Link: https://lore.kernel.org/r/20250731224218.137947-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The CRC error bit is located at bit 17 in the Rx descriptor, but the
driver was incorrectly using bit 16. Fix it.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests to ensure proper backlog accounting in hhf, codel, pie, fq,
fq_pie, and fq_codel qdiscs. We check for the bug pattern originally
found in fq, fq_pie, and fq_codel, which was an underflow in the tbf
parent backlog stats upon child qdisc removal.
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235808.45281-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs.
Fixes: 2d3cbfd6d54a ("net_sched: Flush gso_skb list too during ->change()")
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235725.45243-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When set multicast_query_interval to a large value, the local variable
'time' in br_multicast_send_query() may overflow. If the time is smaller
than jiffies, the timer will expire immediately, and then call mod_timer()
again, which creates a loop and may trigger the following soft lockup
issue.
watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66]
CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none)
Call Trace:
<IRQ>
__netdev_alloc_skb+0x2e/0x3a0
br_ip6_multicast_alloc_query+0x212/0x1b70
__br_multicast_send_query+0x376/0xac0
br_multicast_send_query+0x299/0x510
br_multicast_query_expired.constprop.0+0x16d/0x1b0
call_timer_fn+0x3b/0x2a0
__run_timers+0x619/0x950
run_timer_softirq+0x11c/0x220
handle_softirqs+0x18e/0x560
__irq_exit_rcu+0x158/0x1a0
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
This issue can be reproduced with:
ip link add br0 type bridge
echo 1 > /sys/class/net/br0/bridge/multicast_querier
echo 0xffffffffffffffff >
/sys/class/net/br0/bridge/multicast_query_interval
ip link set dev br0 up
The multicast_startup_query_interval can also cause this issue. Similar to
the commit 99b40610956a ("net: bridge: mcast: add and enforce query
interval minimum"), add check for the query interval maximum to fix this
issue.
Link: https://lore.kernel.org/netdev/20250806094941.1285944-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250812091818.542238-1-wangliang74@huawei.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250813021054.1643649-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This
ensures the ring "catches up" on previously missed allocations.
Increment Rx skb ring head pointer after BD is successfully allocated.
Previously, head pointer was incremented before verifying if descriptor is
successfully allocated and has valid entries, which could lead to ring
state inconsistency if descriptor setup failed.
These changes improve reliability by maintaining adequate descriptor
availability and ensuring proper ring buffer state management.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove Thorsten Winkler as maintainer and add Aswin Karuvally as reviewer.
Thank you Thorsten for your support, welcome Aswin!
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Thorsten Winkler <twinkler@linux.ibm.com>
Acked-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20250813111633.241111-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aJ4MIZQurSo0uNxn@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the implementation of wa_18038517565 [fbc] (Vinod Govindapillai)
- Do not trigger Frame Change events from frontbuffer flush [psr] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://lore.kernel.org/r/aJ0HAh06VHWVdv63@linux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These restore corner case behavior of the EC driver related to the
handling of defective ACPI tables and fix a recent regression in the
ACPI processor driver:
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf)
- Rearrange checks in acpi_processor_ppc_init() to restore the
handling of frequency QoS requests related to _PPC limits
inadvertently broken by a recent update (Rafael Wysocki)"
* tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Relax sanity check of the ECDT ID string
ACPI: processor: perflib: Move problematic pr->performance check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove an artificial limitation from the intel_idle driver,
update the menu cpuidle governor to restore its previous behavior in a
corner case and add one more supported platform configuration to the
intel_pstate driver:
- Allow intel_idle to use _CST information from ACPI tables for idle
states enumeration on any family of processors (Len Brown)
- Restore corner case behavior of the menu cpuidle governor, related
to the handling of systems where idle states selected by the
governor are rejected by the cpuidle driver, inadvertently changed
during the 6.15 development cycle (Rafael Wysocki)
- Add support for Clearwater Forest in the out-of-band (OOB) mode to
the intel_pstate driver (Srinivas Pandruvada)"
* tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
|
|
LMEM is partitioned between multiple VFs and we expect that the more
VFs we have, the less LMEM is assigned to each VF.
This means that we can achieve full LMEM BAR access without the need to
attempt full VF LMEM BAR resize via pci_resize_resource().
Always try to set the largest possible BAR size that allows to fit the
number of enabled VFs and inform the user in case the resize attempt is
not successful.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 32a4d1b98e6663101fd0abfaf151c48feea7abb1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
|
|
* acpi-ec:
ACPI: EC: Relax sanity check of the ECDT ID string
* acpi-processor:
ACPI: processor: perflib: Move problematic pr->performance check
|
|
* pm-cpuidle:
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
* pm-cpufreq:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
|
|
Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.
ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.
The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.
Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Make video port registers nonvolatile. As DSP_CTRL register is written
to twice due to gamma LUT enable bit which is set outside of the main
DSP_CTRL initialization within atomic_enable (for rk356x case it is also
necessary to always disable gamma LUT before writing a new LUT) there is
a chance that DSP_CTRL value read-out in gamma LUT init/update code is
not the one which was written by the preceding DSP_CTRL initialization
code within atomic_enable. This might result in misconfigured DSP_CTRL
which leads to no visual output[1]. Since DSP_CTRL write takes effect
after VSYNC[1] the issue is not always present. When tested on Pinetab2
with kernel 6.14 it happenes only when DRM is compiled as a module[1].
In order to confirm that it is a timing issue I inserted 18ms udelay
before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM
as module - this has also fixed the issue.
[1] https://lore.kernel.org/linux-rockchip/562b38e5.a496.1975f09f983.Coremail.andyshrk@163.com/
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Closes: https://lore.kernel.org/linux-rockchip/DAEVDSTMWI1E.J454VZN0R9MA@cknow.org/
Suggested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250706083629.140332-2-pZ010001011111@proton.me
|
|
Select drm bridge connector when building cdp-dp.
This was missed in previous commit causing build failure.
Fixes: afbbca25d06e ("drm/rockchip: cdn-dp: Convert to drm bridge")
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/aJrlUzV1u4i65NRe@8eba3d7b3083
|
|
Commit 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when
revalidating devices") replaced the call to ata_phys_link_offline() in
ata_eh_revalidate_and_attach() with the new function
ata_eh_link_established() which relaxes the checks on a device link
state to account for low power mode transitions. However, this change
assumed that the device port has a valid scr_read method to obtain the
SStatus register for the port. This is not always the case, especially
with older IDE/PATA adapters (e.g. PATA/IDE devices emulated with QEMU).
For such adapter, ata_eh_link_established() will always return false,
causing ata_eh_revalidate_and_attach() to go into its error path and
ultimately to the device being disabled.
Avoid this by restoring the previous behavior, which is to assume that
the link is online if reading the port SStatus register fails.
While at it, also fix the spelling of SStatus in the comment describing
the function ata_eh_link_established().
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when revalidating devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100842.12224-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef53228 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A reasonably small collection of fixes that came in since the merge
window, mostly small and driver specific plus a cleanup of the menu
reorganisation to address some user confusion with the way the generic
drivers had been handled.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- MAINTAINERS: Remove bouncing kprobes maintainer
* tag 'probes-fixes-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Remove bouncing kprobes maintainer
|
|
The kprobes MAINTAINERS entry includes anil.s.keshavamurthy@intel.com.
That address is bouncing. Remove it.
This still leaves three other listed maintainers.
Link: https://lore.kernel.org/all/20250808180124.7DDE2ECD@davehans-spike.ostc.intel.com/
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+e62c9db591c30e174662@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62c9db591c30e174662
Reported-by: syzbot+d199b52665b6c3069b94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d199b52665b6c3069b94
Reported-by: syzbot+be6b1fdfeae512726b4e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=be6b1fdfeae512726b4e
Signed-off-by: Sven Stegemann <sven@stegemann.de>
Link: https://patch.msgid.link/20250812191810.27777-1-sven@stegemann.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Davide Caratti says:
====================
ets: use old 'nbands' while purging unused classes
- patch 1/2 fixes a NULL dereference in the control path of sch_ets qdisc
- patch 2/2 extends kselftests to verify effectiveness of the above fix
====================
Link: https://patch.msgid.link/cover.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend sch_ets.sh to add a reproducer for problematic list deletions when
active DWRR class are purged by ets_qdisc_change() [1] [2].
[1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/f3b9bacc73145f265c19ab80785933da5b7cbdec.1754581577.git.dcaratti@redhat.com/
Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/489497cb781af7389011ca1591fb702a7391f5e7.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify()
after recent changes from Lion [2]. The problem is: in ets_qdisc_change()
we purge unused DWRR queues; the value of 'q->nbands' is the new one, and
the cleanup should be done with the old one. The problem is here since my
first attempts to fix ets_qdisc_change(), but it surfaced again after the
recent qdisc len accounting fixes. Fix it purging idle DWRR queues before
assigning a new value of 'q->nbands', so that all purge operations find a
consistent configuration:
- old 'q->nbands' because it's needed by ets_class_find()
- old 'q->nstrict' because it's needed by ets_class_is_strict()
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary)
Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021
RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80
Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab
RSP: 0018:ffffba186009f400 EFLAGS: 00010202
RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004
RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004
R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000
R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000
FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ets_class_qlen_notify+0x65/0x90 [sch_ets]
qdisc_tree_reduce_backlog+0x74/0x110
ets_qdisc_change+0x630/0xa40 [sch_ets]
__tc_modify_qdisc.constprop.0+0x216/0x7f0
tc_modify_qdisc+0x7c/0x120
rtnetlink_rcv_msg+0x145/0x3f0
netlink_rcv_skb+0x53/0x100
netlink_unicast+0x245/0x390
netlink_sendmsg+0x21b/0x470
____sys_sendmsg+0x39d/0x3d0
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f2155114084
Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084
RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003
RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f
R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0
R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0
</TASK>
[1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 103406b38c60 ("net/sched: Always pass notifications when child class becomes empty")
Fixes: c062f2a0b04d ("net/sched: sch_ets: don't remove idle classes from the round-robin list")
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Reported-by: Li Shuang <shuali@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-108026
Reviewed-by: Petr Machata <petrm@nvidia.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/7928ff6d17db47a2ae7cc205c44777b1f1950545.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below. [0]
When nsim_queue_uninit() is called from nsim_init_netdevsim(),
register_netdevice() has not been called, thus dev->dstats has
not been allocated.
Let's not call dev_dstats_rx_dropped_add() in such a case.
[0]
BUG: unable to handle page fault for address: ffff88809782c020
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 1b401067 P4D 1b401067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN NOPTI
CPU: 3 UID: 0 PID: 8476 Comm: syz.1.251 Not tainted 6.16.0-syzkaller-06699-ge8d780dcd957 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:local_add arch/x86/include/asm/local.h:33 [inline]
RIP: 0010:u64_stats_add include/linux/u64_stats_sync.h:89 [inline]
RIP: 0010:dev_dstats_rx_dropped_add include/linux/netdevice.h:3027 [inline]
RIP: 0010:nsim_queue_free+0xba/0x120 drivers/net/netdevsim/netdev.c:714
Code: 07 77 6c 4a 8d 3c ed 20 7e f1 8d 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 46 4a 03 1c ed 20 7e f1 8d <4c> 01 63 20 be 00 02 00 00 48 8d 3d 00 00 00 00 e8 61 2f 58 fa 48
RSP: 0018:ffffc900044af150 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffff88809782c000 RCX: 00000000000079c3
RDX: 1ffffffff1be2fc7 RSI: ffffffff8c15f380 RDI: ffffffff8df17e38
RBP: ffff88805f59d000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000003 R14: ffff88806ceb3d00 R15: ffffed100dfd308e
FS: 0000000000000000(0000) GS:ffff88809782c000(0063) knlGS:00000000f505db40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: ffff88809782c020 CR3: 000000006fc6a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
nsim_queue_uninit drivers/net/netdevsim/netdev.c:993 [inline]
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1049 [inline]
nsim_create+0xd0a/0x1260 drivers/net/netdevsim/netdev.c:1101
__nsim_dev_port_add+0x435/0x7d0 drivers/net/netdevsim/dev.c:1438
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1494 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1546 [inline]
nsim_dev_reload_up+0x5b8/0x860 drivers/net/netdevsim/dev.c:1003
devlink_reload+0x322/0x7c0 net/devlink/dev.c:474
devlink_nl_reload_doit+0xe31/0x1410 net/devlink/dev.c:584
genl_family_rcv_msg_doit+0x206/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg net/socket.c:729 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2614
___sys_sendmsg+0x134/0x1d0 net/socket.c:2668
__sys_sendmsg+0x16d/0x220 net/socket.c:2700
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x7c/0x3a0 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x32/0x80 arch/x86/entry/syscall_32.c:331
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf708e579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f505d55c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 0000000080000080
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffff88809782c020
Fixes: 2a68a22304f9 ("netdevsim: account dropped packet length in stats on queue free")
Reported-by: syzbot+8aa80c6232008f7b957d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/688bb9ca.a00a0220.26d0e1.0050.GAE@google.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250812162130.4129322-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kunit test's skb_pkt is consumed by mctp_dst_input() so shouldn't be
freed separately.
Fixes: e6d8e7dbc5a3 ("net: mctp: Add bind lookup test")
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Closes: https://lore.kernel.org/all/734b02a3-1941-49df-a0da-ec14310d41e4@ghiti.fr/
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://patch.msgid.link/20250812-fix-mctp-bind-test-v1-1-5e2128664eb3@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the data argument of Devres::new() is Err(), we leak the preceding
call to devm_add_action().
In order to fix this, call devm_add_action() in a unit type initializer in
try_pin_init!() after the initializers of all other fields.
Fixes: f5d3ef25d238 ("rust: devres: get rid of Devres' inner Arc")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250812130928.11075-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-08-13:
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250813151905.2040816-1-alexander.deucher@amd.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for *net*:
1) I managed to add a null dereference crash in nft_set_pipapo
in the current development cycle, was not caught by CI
because the avx2 implementation is fine, but selftest
splats when run on non-avx2 host.
2) Fix the ipvs estimater kthread affinity, was incorrect
since 6.14. From Frederic Weisbecker.
3) nf_tables should not allow to add a device to a flowtable
or netdev chain more than once -- reject this.
From Pablo Neira Ayuso. This has been broken for long time,
blamed commit dates from v5.8.
* tag 'nf-25-08-13' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
====================
Link: https://patch.msgid.link/20250813113800.20775-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|