| Age | Commit message (Collapse) | Author |
|---|
|
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Windows2016 guest tries to enable LBR by setting the corresponding bits
in MSR_IA32_DEBUGCTLMSR. KVM does not emulate MSR_IA32_DEBUGCTLMSR and
spams the host kernel logs with error messages like:
kvm [...]: vcpu1, guest rIP: 0xfffff800a8b687d3 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop"
This patch fixes this by enabling error logging only with
'report_ignored_msrs=1'.
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Message-Id: <20201105153932.24316-1-pankaj.gupta.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME)
emulation in helper fn", 2020-10-21) subtly changed the behavior of guest
writes to MSR_KVM_SYSTEM_TIME(_NEW). Restore the previous behavior; update
the masterclock any time the guest uses a different msr than before.
Fixes: 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21)
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the paravirtual cpuid enforcement mechanism idempotent to ioctl()
ordering by updating pv_cpuid.features whenever userspace requests the
capability. Extract this update out of kvm_update_cpuid_runtime() into a
new helper function and move its other call site into
kvm_vcpu_after_set_cpuid() where it more likely belongs.
Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
commit 66570e966dd9 ("kvm: x86: only provide PV features if enabled in
guest's CPUID") only protects against disallowed guest writes to KVM
paravirtual msrs, leaving msr reads unchecked. Fix this by enforcing
KVM_CPUID_FEATURES for msr reads as well.
Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-4-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Recent introduction of the userspace msr filtering added code that uses
negative error codes for cases that result in either #GP delivery to
the guest, or handled by the userspace msr filtering.
This breaks an assumption that a negative error code returned from the
msr emulation code is a semi-fatal error which should be returned
to userspace via KVM_RUN ioctl and usually kill the guest.
Fix this by reusing the already existing KVM_MSR_RET_INVALID error code,
and by adding a new KVM_MSR_RET_FILTERED error code for the
userspace filtered msrs.
Fixes: 291f35fb2c1d1 ("KVM: x86: report negative values from wrmsr emulation to userspace")
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201101115523.115780-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Should be squashed into 66570e966dd9cb4f.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201023183358.50607-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It should be an accident when rebase, since we've already have section
8.25 (which is KVM_CAP_S390_DIAG318). Fix the number.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012044.5151-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix an off-by-one style bug in pte_list_add() where it failed to
account the last full set of SPTEs, i.e. when desc->sptes is full
and desc->more is NULL.
Merge the two "PTE_LIST_EXT-1" checks as part of the fix to avoid
an extra comparison.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <1601196297-24104-1-git-send-email-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for v5.10, take #2
- Fix compilation error when PMD and PUD are folded
- Fix regresssion of the RAZ behaviour of ID_AA64ZFR0_EL1
|
|
Set all EHL/TGL phy_addr to -1 so that the driver will automatically
detect it at run-time by probing all the possible 32 addresses.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201106094341.4241-1-vee.khee.wong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Actually, withing should be within.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604649025-22559-1-git-send-email-wangqing@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
withing should be within.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604650310-30432-1-git-send-email-wangqing@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alex Elder says:
====================
net: ipa: constrain GSI interrupts
The goal of this series is to more tightly control when GSI
interrupts are enabled. This is a long-ish series, so I'll
describe it in parts.
The first patch is actually unrelated... I forgot to include
it in my previous series (which exposed the GSI layer to the
IPA version). It is a trivial comments-only update patch.
The second patch defers registering the GSI interrupt handler
until *after* all of the resources that handler touches have
been initialized. In practice, we don't see this interrupt
that early, but this precludes an obvious problem.
The next two patches are simple changes. The first just
trivially renames a field. The second switches from using
constant mask values to using an enumerated type of bit
positions to represent each GSI interrupt type.
The rest implement the "real work." First, all interrupts
are disabled at initialization time. Next, we keep track of
a bitmask of enabled GSI interrupt types, updating it each
time we enable or disable one of them. From there we have
a set of patches that one-by-one enable each interrupt type
only during the period it is required. This includes allowing
a channel to generate IEOB interrupts only when it has been
enabled. And finally, the last patch simplifies some code
now that all GSI interrupt types are handled uniformly.
====================
Link: https://lore.kernel.org/r/20201105181407.8006-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that all of the GSI interrupts are handled uniformly,
change gsi_irq_type_update() so it takes a value. Have the
function assign that value to the cached mask of enabled GSI
IRQ types before writing it to hardware.
Note that gsi_irq_teardown() will only be called after
gsi_irq_disable(), so it's not necessary for the former
to disable all IRQ types. Get rid of that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most GSI general errors are unrecoverable without a full reset.
Despite that, we want to receive these errors so we can at least
report what happened before whatever undefined behavior ensues.
Explicitly disable all such interrupts in gsi_irq_setup(), then
enable those we want in gsi_irq_enable(). List the interrupt types
we are interested in (everything but breakpoint) explicitly rather
than using GSI_CNTXT_GSI_IRQ_ALL, and remove that symbol's
definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible for other execution environments (EEs, like the modem)
to request changes to local (AP) channel or event ring state. We do
not support this feature.
In gsi_irq_setup(), explicitly zero the mask that defines which
channels are permitted to generate inter-EE channel state change
interrupts. Do the same for the event ring mask.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A GSI channel must be started in order to use it to perform a
transfer data (or command) transaction. And the only time we'll see
an IEOB interrupt is if we send a transaction to a started channel.
Therefore we do not need to have the IEOB interrupt type enabled
until at least one channel has been started. And once the last
started channel has been stopped, we can disable the IEOB interrupt
type again.
We already enable the IEOB interrupt for a particular channel only
when it is started. Extend that by having the IEOB interrupt *type*
be enabled only when at least one channel is in STARTED state.
Disallow all channels from triggering the IEOB interrupt in
gsi_irq_setup(). We only enable an channel's interrupt when
needed, so there is no longer any need to zero the channel mask
in gsi_irq_disable().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The completion of a generic EE GSI command is signaled by a global
interrupt of type GP_INT1. The only other used type for a global
interrupt is a hardware error report.
First, disallow all global interrupt types in gsi_irq_setup(). We
want to know about hardware errors, so re-enable the interrupt type
in gsi_irq_enable(), to allow hardware errors to be reported.
Disable that interrupt type again in gsi_irq_disable().
We only issue generic EE commands one at a time, and there's no
reason to keep the completion interrupt enabled when no generic
EE command is pending. We furthermore have no need to enable the
GP_INT2 or GP_INT3 interrupt types (which aren't used).
The change in gsi_irq_enable() makes GSI_CNTXT_GLOB_IRQ_ALL unused,
so get rid of it. Have gsi_generic_command() enable the GP_INT1
interrupt type (in addition to the ERROR_INT type) only while a
generic command is pending.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A GSI event ring causes an event control interrupt to fire whenever
its state changes (between NOT_ALLOCATED and ALLOCATED). No event
ring should ever change state except when we request it to.
Currently, we permit *all* events rings to generate event control
interrupts--even those that are never used. And we enable event
control interrupts essentially at all times, from setup to teardown.
Instead, only enable the event control interrupt type for the
duration of an event ring command, and when doing so, only allow
the event ring being operated upon to cause the interrupt to fire.
Disallow all event rings from issuing the event control interrupt
in gsi_irq_setup().
Because an event ring's interrupt is only enabled when needed,
there is no longer any need to zero the event channel mask in
gsi_irq_disable().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A GSI channel causes a channel control interrupt to fire whenever
its state changes (between NOT_ALLOCATED, ALLOCATED, STARTED, etc.).
We do not support inter-EE channel commands (initiated by other EEs),
so no channel should ever change state except when we request it to.
Currently, we permit *all* channels to generate channel control
interrupts--even those that are never used. And we enable channel
control interrupts essentially at all times, from setup to teardown.
Instead, disable all channel control interrupts initially in
gsi_irq_setup(), and only enable the channel control interrupt
type for the duration of a channel command. When doing so, only
allow the channel being operated upon to cause the interrupt to
fire.
Because a channel's interrupt is now enabled only when needed (one
channel at a time), there is no longer any need to zero the channel
mask in gsi_irq_disable().
Add new gsi_irq_type_enable() and gsi_irq_type_disable() as helper
functions to control whether a given GSI interrupt type is enabled.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Keep track of the set of GSI interrupt types that are currently
enabled by recording the mask value to write (or last written) to
the TYPE_IRQ_MSK register.
Create a new helper function gsi_irq_type_update() to handle
actually writing the register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce gsi_irq_setup() and gsi_irq_teardown() to disable all
GSI interrupts when first setting up GSI hardware, and to clean
things up when we're done.
Re-enable all GSI interrupt types in gsi_irq_enable(), but do
so only after each of the type-specific interrupt masks has
been configured. Similarly, disable all interrupt types in
gsi_irq_disable()--first--before zeroing out the type-specific
masks.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the GSI interrupt types with an enumerated type whose values
are the bit positions representing each interrupt type. Include a
short comment describing how each interrupt type is used.
Build up the enabled interrupt mask explicitly in gsi_irq_enable(),
and get rid of the definition of GSI_CNTXT_TYPE_IRQ_MSK_ALL.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the "event_enable_bitmap" field of the GSI structure to be
"ieob_enabled_bitmap". An upcoming patch will cache the last value
stored for another interrupt mask and this is a more direct naming
convention to follow.
Add a few comments to explain the bitmap fields in the GSI structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce gsi_irq_init() and gsi_irq_exit(), to encapsulate looking
up the GSI IRQ and registering its handler. Call gsi_irq_init() a
little later in gsi_init(), and initialize the completion earlier.
The IRQ handler accesses both the GSI virtual memory pointer and the
completion, and this way these things will have been initialized
before the gsi_irq() can ever be called.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GSI code is now exposed to IPA version numbers, and we handle
version-specific behavior based on the IPA version.
Modify some comments that talk about GSI versions so they reference
IPA versions instead. Correct version number errors in a couple of
these comments.
The (comment) mapping between IPA and GSI versions in the definition
of the ipa_version enumerated type remains.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver transports LAPB (X.25 link layer) frames over TTY links.
I can safely say that this driver has no actual user because it was
not working at all until:
commit 8fdcabeac398 ("drivers/net/wan/x25_asy: Fix to make it work")
The code in its current state still has problems:
1.
The uses of "struct x25_asy" in x25_asy_unesc (when receiving) and in
x25_asy_write_wakeup (when sending) are not protected by locks against
x25_asy_change_mtu's changing of the transmitting/receiving buffers.
Also, all "netif_running" checks in this driver are not protected by
locks against the ndo_stop function.
2.
The driver stops all TTY read/write when the netif is down.
I think this is not right because this may cause the last outgoing frame
before the netif goes down to be incompletely transmitted, and the first
incoming frame after the netif goes up to be incompletely received.
And there may also be other problems.
I was planning to fix these problems but after recent discussions about
deleting other old networking code, I think we may just delete this
driver, too.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20201105073434.429307-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- revert a nvme_queue size optimization (Keith Bush)
- fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"
- null_blk zone locking fix (Damien)
* tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
null_blk: Fix scheduling in atomic with zoned mode
nvme-tcp: avoid repeated request completion
nvme-rdma: avoid repeated request completion
nvme-tcp: avoid race between time out and tear down
nvme-rdma: avoid race between time out and tear down
nvme: introduce nvme_sync_io_queues
Revert "nvme-pci: remove last_sq_tail"
|
|
Pull io_uring fixes from Jens Axboe:
"A set of fixes for io_uring:
- SQPOLL cancelation fixes
- Two fixes for the io_identity COW
- Cancelation overflow fix (Pavel)
- Drain request cancelation fix (Pavel)
- Link timeout race fix (Pavel)"
* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
io_uring: fix link lookup racing with link timeout
io_uring: use correct pointer for io_uring_show_cred()
io_uring: don't forget to task-cancel drained reqs
io_uring: fix overflowed cancel w/ linked ->files
io_uring: drop req/tctx io_identity separately
io_uring: ensure consistent view of original task ->mm from SQPOLL
io_uring: properly handle SQPOLL request cancelations
io-wq: cancel request if it's asking for files and we don't have them
|
|
This patch fixes NULL pointer dereference due to NULL pcs_config
in pcs_ops.
Fixes: e4e143e26ce8 ("net: macb: add support for high speed interface")
Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com>
Link: https://lore.kernel.org/netdev/2db854c7-9ffb-328a-f346-f68982723d29@microchip.com/
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/1604599113-2488-1-git-send-email-pthombar@cadence.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use div_s64 so that the neg_adj is not needed.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1604634729-24960-3-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor idt82p33_xfer and use i2c_master_send for write operation.
Because some I2C controllers are only working with single-burst write
transaction.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1604634729-24960-2-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add idt82p33_adjphase() to support PHC write phase mode.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1604634729-24960-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:
Task Prio Operation
T1 120 lock(F)
T2 120 lock(F) -> blocks (top waiter)
T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter)
XX timeout/ -> wakes T2
signal
T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter
and the lower priority T2 cannot steal the lock.
-> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()
The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.
The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().
Drop the locks, so that T3 can make progress, and then try the fixup again.
Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.
[ tglx: Wrote comment and changelog ]
Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
|
|
With CONFIG_BRIDGE=m the compilation fails:
ld: drivers/net/ethernet/marvell/prestera/prestera_switchdev.o: in function `prestera_bridge_port_event':
prestera_switchdev.c:(.text+0x2ebd): undefined reference to `br_vlan_enabled'
in case the driver is statically enabled.
Fix it by adding 'BRIDGE || BRIDGE=n' dependency.
Fixes: e1189d9a5fbe ("net: marvell: prestera: Add Switchdev driver implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201106161128.24069-1-vadym.kochan@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-11-03
v1->v2:
- Fix fixes line tag in patch #1
- Toss ktls refcount leak fix, Maxim will look further into the root
cause.
- Toss eswitch chain 0 prio patch, until we determine if it is needed
for -rc and net.
* tag 'mlx5-fixes-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix incorrect access of RCU-protected xdp_prog
net/mlx5e: Fix VXLAN synchronization after function reload
net/mlx5: E-switch, Avoid extack error log for disabled vport
net/mlx5: Fix deletion of duplicate rules
net/mlx5e: Use spin_lock_bh for async_icosq_lock
net/mlx5e: Protect encap route dev from concurrent release
net/mlx5e: Fix modify header actions memory leak
====================
Link: https://lore.kernel.org/r/20201105202129.23644-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initialization for err with 0 seems useless, as it is soon updated
with -ENOMEM. So, we can remove it.
Changes since v1:
-Keep -ENOMEM still.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/1604541244-3241-1-git-send-email-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTL8125B has same or similar short packet hw padding bug as RTL8168evl.
The main workaround has been extended accordingly, however we have to
disable also hw checksumming for short packets on affected new chip
versions. Instead of checking for an affected chip version let's
simply disable hw checksumming for short packets in general.
v2:
- remove the version checks and disable short packet hw csum in general
- reflect this in commit title and message
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/7fbb35f0-e244-ef65-aa55-3872d7d38698@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The caller of rtl8169_tso_csum_v2() frees the skb if false is returned.
eth_skb_pad() internally frees the skb on error what would result in a
double free. Therefore use __skb_put_padto() directly and instruct it
to not free the skb on error.
Fixes: b423e9ae49d7 ("r8169: fix offloaded tx checksum for small packets.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the gcc warning:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation]
2673 | for (i = 0; i < n; ++i) \
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Driver bugfixes for I2C.
Most of them are for the new mlxbf driver which got more exposure
after rc1. The sh_mobile patch should already have reached you during
the merge window, but I accidently dropped it. However, since it fixes
a problem with rebooting, it is still fine for rc3"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED
i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
i2c: mlxbf: Update author and maintainer email info
i2c: mlxbf: Update reference clock frequency
i2c: mlxbf: Remove unecessary wrapper functions
i2c: mlxbf: Fix resrticted cast warning of sparse
i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call
i2c: sh_mobile: implement atomic transfers
i2c: mediatek: move dma reset before i2c reset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- SPDX comment style fix
- ignore memory that is unusable
- avoid setting a kernel text offset for the !MMU kernels, where
skipping the first page of memory is both unnecessary and costly
- avoid passing the flag bits in satp to pfn_to_virt()
- fix __put_kernel_nofault, where we had the arguments to
__put_user_nocheck reversed
- workaround for a bug in the FU540 to avoid triggering PMP issues
during early boot
- change to how we pull symbols out of the vDSO. The old mechanism was
removed from binutils-2.35 (and has been backported to Debian's 2.34)
* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
RISC-V: Use non-PGD mappings for early DTB access
riscv: uaccess: fix __put_kernel_nofault()
riscv: fix pfn_to_virt err in do_page_fault().
riscv: Set text_offset correctly for M-Mode
RISC-V: Remove any memblock representing unusable memory area
risc-v: kernel: ftrace: Fixes improper SPDX comment style
|
|
Radhey Shyam Pandey says:
====================
net: axienet: Dynamically enable MDIO interface
This patchset dynamically enable MDIO interface. The background for this
change is coming from Cadence GEM controller(macb) in which MDC is active
only during MDIO read or write operations while the PHY registers are
read or written. It is implemented as an IP feature.
For axiethernet as dynamic MDC enable/disable is not supported in hw
we are implementing it in sw. This change doesn't affect any existing
functionality.
====================
Link: https://lore.kernel.org/r/1604402770-78045-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MDIO spec does not require an MDC at all times, only when MDIO
transactions are occurring. This patch allows the xilinx_axienet
driver to disable the MDC when not in use, and re-enable it when
needed. It also simplifies the driver by removing MDC disable
and enable in device reset sequence.
Signed-off-by: Clayton Rayment <clayton.rayment@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce helper functions to enable/disable MDIO interface clock. This
change serves a preparatory patch for the coming feature to dynamically
control the management bus clock.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allen Pais says:
====================
net: convert tasklets to use new tasklet_setup API
Commit 12cc923f1ccc ("tasklet: Introduce new initialization API")'
introduced a new tasklet initialization API. This series converts
all the net/* drivers to use the new tasklet_setup() API
The following series is based on net-next (9faebeb2d)
v3:
introduce qdisc_from_priv, suggested by Eric Dumazet.
v2:
get rid of QDISC_ALIGN()
v1:
fix kerneldoc
====================
Link: https://lore.kernel.org/r/20201103091823.586717-1-allen.lkml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
