| Age | Commit message (Collapse) | Author |
|---|
|
If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may
lead to such delights as performing cache maintenance on whatever
address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically
outside the kernel memory map and goes about as well as expected.
Don't do that.
Fixes: a4a4330db46a ("swiotlb: add support for non-coherent DMA")
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With the overflow buffer removed, we no longer have a unique address
which is guaranteed not to be a valid DMA target to use as an error
token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent
an unlikely DMA target, but unfortunately there are already SWIOTLB
users with DMA-able memory at physical address 0 which now gets falsely
treated as a mapping failure and leads to all manner of misbehaviour.
The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the
other commonly-used error value of all-bits-set, since the last single
byte of memory is by far the least-likely-valid DMA target.
Fixes: dff8d6c1ed58 ("swiotlb: remove the overflow buffer")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().
An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.
Parent snapshot:
.
|--- 261/
|--- 271/
|--- 266/
|--- 259/
|--- 260/
| |--- 267
|
|--- 264/
| |--- 258/
| |--- 257/
|
|--- 265/
|--- 268/
|--- 269/
| |--- 262/
|
|--- 270/
|--- 272/
| |--- 263/
| |--- 275/
|
|--- 274/
|--- 273/
Send snapshot:
.
|-- 275/
|-- 274/
|-- 273/
|-- 262/
|-- 269/
|-- 258/
|-- 271/
|-- 268/
|-- 267/
|-- 270/
|-- 259/
| |-- 265/
|
|-- 272/
|-- 257/
|-- 260/
|-- 264/
|-- 263/
|-- 261/
|-- 266/
When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.
When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:
1) We issue the move operation for inode 274;
2) Because inode 262 depended on the move operation of inode 274 (it was
delayed because 274 is its ancestor in the send snapshot), we issue the
move operation for inode 262;
3) We issue the move operation for inode 272, because it was delayed by
inode 274 too (ancestor of 272 in the send snapshot);
4) We issue the move operation for inode 269 (it was delayed by 262);
5) We issue the move operation for inode 257 (it was delayed by 272);
6) We issue the move operation for inode 260 (it was delayed by 272);
7) We issue the move operation for inode 258 (it was delayed by 269);
8) We issue the move operation for inode 264 (it was delayed by 257);
9) We issue the move operation for inode 271 (it was delayed by 258);
10) We issue the move operation for inode 263 (it was delayed by 264);
11) We issue the move operation for inode 268 (it was delayed by 271);
12) We verify if we can issue the move operation for inode 270 (it was
delayed by 271). We detect a path loop in the current state, because
inode 267 needs to be moved first before we can issue the move
operation for inode 270. So we delay again the move operation for
inode 270, this time we will attempt to do it after inode 267 is
moved;
13) We issue the move operation for inode 261 (it was delayed by 263);
14) We verify if we can issue the move operation for inode 266 (it was
delayed by 263). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12);
15) We issue the move operation for inode 267 (it was delayed by 268);
16) We verify if we can issue the move operation for inode 266 (it was
delayed by 270). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12). So here we added
again the same delayed move operation that we added in step 14;
17) We attempt again to see if we can issue the move operation for inode
266, and as in step 16, we realize we can not due to a path loop in
the current state due to a dependency on inode 270. Again we delay
inode's 266 rename to happen after inode's 270 move operation, adding
the same dependency to the empty stack that we did in steps 14 and 16.
The next iteration will pick the same move dependency on the stack
(the only entry) and realize again there is still a path loop and then
again the same dependency to the stack, over and over, resulting in
an infinite loop.
So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.
A test case for fstests, with this reproducer, follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Both futex and epoll need this call, and can cause build failure on
systems that don't have it pthread_attr_setaffinity_np().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20181109210719.pr7ohayuwqmfp2wl@linux-r8p5
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The iregs output was missing the newline at end as well as the leading
ABI output. This made it hard to compare the iregs and uregs values.
Instead, use a single function to output the register values and use it
for both, iregs and uregs, to ensure the output is consistent.
Before:
perf 7049 [-01] 1343.354347: 1 cycles:ppp:
ffffffffa7bc21ce perf_event_exec+0x18e (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7ead3 setup_new_exec+0xf3 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7cd7be5 load_elf_binary+0x395 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7e540 search_binary_handler+0x80 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f1aa __do_execve_file.isra.13+0x58a (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f561 do_execve+0x21 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f596 __x64_sys_execve+0x26 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7a041cb do_syscall_64+0x5b (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa840008c entry_SYSCALL_64+0x7c (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
AX:0x80000000 BX:0x0 CX:0x0 DX:0x7 SI:0xf DI:0x286 BP:0xffff95bc8213a460 SP:0xffffacbf0ba97d18 IP:0xffffffffa7bc21cd FLAGS:0x28e CS:0x10 SS:0x18 R8:0x2 R9:0x21440 R10:0x33816fb3b8c R11:0x1 R12:0xffff95bc8213a460 R13:0xffff95bc8213a400 R14:0xffff95bc8213a400 R15:0x1 ABI:2 AX:0xffffffffffffffda BX:0xffffffffffffffff CX:0x7f84ad85798b DX:0x560209699d50 SI:0x7ffe2c7a6820 DI:0x7ffe2c7a8c9b BP:0x7ffe2c7a20d0 SP:0x7ffe2c7a2058 IP:0x7f84ad85798b FLAGS:0x206 CS:0x33 SS:0x2b R8:0x7ffe2c7a2030 R9:0x7f84ae55f010 R10:0x8 R11:0x206 R12:0xffffffffffffffff R13:0xffffffffffffffff R14:0xffffffffffffffff R15:0xffffffffffffffff
perf 7049 [-01] 1343.354363: 1 cycles:ppp:
...
After:
perf 7049 [-01] 1343.354347: 1 cycles:ppp:
ffffffffa7bc21ce perf_event_exec+0x18e (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7ead3 setup_new_exec+0xf3 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7cd7be5 load_elf_binary+0x395 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7e540 search_binary_handler+0x80 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f1aa __do_execve_file.isra.13+0x58a (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f561 do_execve+0x21 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f596 __x64_sys_execve+0x26 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7a041cb do_syscall_64+0x5b (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa840008c entry_SYSCALL_64+0x7c (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ABI:2 AX:0x80000000 BX:0x0 CX:0x0 DX:0x7 SI:0xf DI:0x286 BP:0xffff95bc8213a460 SP:0xffffacbf0ba97d18 IP:0xffffffffa7bc21cd FLAGS:0x28e CS:0x10 SS:0x18 R8:0x2 R9:0x21440 R10:0x33816fb3b8c R11:0x1 R12:0xffff95bc8213a460 R13:0xffff95bc8213a400 R14:0xffff95bc8213a400 R15:0x1
ABI:2 AX:0xffffffffffffffda BX:0xffffffffffffffff CX:0x7f84ad85798b DX:0x560209699d50 SI:0x7ffe2c7a6820 DI:0x7ffe2c7a8c9b BP:0x7ffe2c7a20d0 SP:0x7ffe2c7a2058 IP:0x7f84ad85798b FLAGS:0x206 CS:0x33 SS:0x2b R8:0x7ffe2c7a2030 R9:0x7f84ae55f010 R10:0x8 R11:0x206 R12:0xffffffffffffffff R13:0xffffffffffffffff R14:0xffffffffffffffff R15:0xffffffffffffffff
perf 7049 [-01] 1343.354363: 1 cycles:ppp:
...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181107223437.9071-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While working on augmented syscalls I got into this error:
# trace -vv --filter-pids 2469,1663 -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
<SNIP>
libbpf: map 0 is "__augmented_syscalls__"
libbpf: map 1 is "__bpf_stdout__"
libbpf: map 2 is "pids_filtered"
libbpf: map 3 is "syscalls"
libbpf: collecting relocating info for: '.text'
libbpf: relo for 13 value 84 name 133
libbpf: relocation: insn_idx=3
libbpf: relocation: find map 3 (pids_filtered) for insn 3
libbpf: collecting relocating info for: 'raw_syscalls:sys_enter'
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=1
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=3
libbpf: relo for 9 value 28 name 178
libbpf: relocation: insn_idx=36
libbpf: relocation: find map 1 (__augmented_syscalls__) for insn 36
libbpf: collecting relocating info for: 'raw_syscalls:sys_exit'
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=0
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=2
bpf: config program 'raw_syscalls:sys_enter'
bpf: config program 'raw_syscalls:sys_exit'
libbpf: create map __bpf_stdout__: fd=3
libbpf: create map __augmented_syscalls__: fd=4
libbpf: create map syscalls: fd=5
libbpf: create map pids_filtered: fd=6
libbpf: added 13 insn from .text to prog raw_syscalls:sys_enter
libbpf: added 13 insn from .text to prog raw_syscalls:sys_exit
libbpf: load bpf program failed: Operation not permitted
libbpf: failed to load program 'raw_syscalls:sys_exit'
libbpf: failed to load object 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
bpf: load objects failed: err=-4009: (Incorrect kernel version)
event syntax error: 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Failed to load program for unknown reason
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
If I then try to use strace (perf trace'ing 'perf trace' needs some more work
before its possible) to get a bit more info I get:
# strace -e bpf trace --filter-pids 2469,1663 -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERF_EVENT_ARRAY, key_size=4, value_size=4, max_entries=4, map_flags=0, inner_map_fd=0, map_name="__bpf_stdout__", map_ifindex=0}, 72) = 3
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERF_EVENT_ARRAY, key_size=4, value_size=4, max_entries=4, map_flags=0, inner_map_fd=0, map_name="__augmented_sys", map_ifindex=0}, 72) = 4
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=1, max_entries=500, map_flags=0, inner_map_fd=0, map_name="syscalls", map_ifindex=0}, 72) = 5
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=512, map_flags=0, inner_map_fd=0, map_name="pids_filtered", map_ifindex=0}, 72) = 6
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=57, insns=0x1223f50, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_enter", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = 7
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=18, insns=0x1224120, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=18, insns=0x1224120, license="GPL", log_level=1, log_size=262144, log_buf="", kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=18, insns=0x1224120, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
event syntax error: 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Failed to load program for unknown reason
<SNIP similar output as without 'strace'>
#
I managed to create the maps, etc, but then installing the "sys_exit" hook into
the "raw_syscalls:sys_exit" tracepoint somehow gets -EPERMed...
I then go and try reducing the size of this new table:
+++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
@@ -47,6 +47,17 @@ struct augmented_filename {
#define SYS_OPEN 2
#define SYS_OPENAT 257
+struct syscall {
+ bool filtered;
+};
+
+struct bpf_map SEC("maps") syscalls = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(struct syscall),
+ .max_entries = 500,
+};
And after reducing that .max_entries a tad, it works. So yeah, the "unknown
reason" should be related to the number of bytes all this is taking, reduce the
default for pid_map()s so that we can have a "syscalls" map with enough slots
for all syscalls in most arches. And take notes about this error message,
improve it :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-yjzhak8asumz9e9hts2dgplp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change makes it much easier to easily distinguish between
consecutive samples by keeping the empty line between them, like we see
when we do not enable uregs output.
Before:
cpp-inlining 28298 [-01] 54837.342780: 3068085 cycles:pp:
7ffff7c96709 __hypot_finite+0xa9 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x0 BX:0x40f56cf6 CX:0x294a3ae7 ...
cpp-inlining 28298 [-01] 54837.344493: 2881929 cycles:pp:
7ffff7c96696 __hypot_finite+0x36 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x40d440c7 BX:0x40d440c7 CX:0x4d45e5da ...
After:
cpp-inlining 28298 [-01] 54837.342780: 3068085 cycles:pp:
7ffff7c96709 __hypot_finite+0xa9 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x0 BX:0x40f56cf6 CX:0x294a3ae7 ...
cpp-inlining 28298 [-01] 54837.344493: 2881929 cycles:pp:
7ffff7c96696 __hypot_finite+0x36 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x40d440c7 BX:0x40d440c7 CX:0x4d45e5da ...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181107093705.16346-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
self pid filter"
Now that we have the "filtered_pids" logic in place, no need to do this
rough filter to avoid the feedback loop from 'perf trace's own syscalls,
revert it.
This reverts commit 7ed71f124284359676b6496ae7db724fee9da753.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-88vh02cnkam0vv5f9vp02o3h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that 'perf trace' fills in that "filtered_pids" BPF map, remove the
set of filtered pids used as an example to test that feature.
That feature works like this:
Starting a system wide 'strace' like 'perf trace' augmented session we
noticed that lots of events take place for a pid, which ends up being
the feedback loop of perf trace's syscalls being processed by the
'gnome-terminal' process:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c
0.391 ( 0.002 ms): gnome-terminal/2469 read(fd: 17</dev/ptmx>, buf: 0x564b79f750bc, count: 8176) = 453
0.394 ( 0.001 ms): gnome-terminal/2469 read(fd: 17</dev/ptmx>, buf: 0x564b79f75280, count: 7724) = -1 EAGAIN Resource temporarily unavailable
0.438 ( 0.001 ms): gnome-terminal/2469 read(fd: 4<anon_inode:[eventfd]>, buf: 0x7fffc696aeb0, count: 16) = 8
0.519 ( 0.001 ms): gnome-terminal/2469 read(fd: 17</dev/ptmx>, buf: 0x564b79f75280, count: 7724) = 114
0.522 ( 0.001 ms): gnome-terminal/2469 read(fd: 17</dev/ptmx>, buf: 0x564b79f752f1, count: 7611) = -1 EAGAIN Resource temporarily unavailable
^C
So we can use --filter-pids to get rid of that one, and in this case what is
being used to implement that functionality is that "filtered_pids" BPF map that
the tools/perf/examples/bpf/augmented_raw_syscalls.c created and that 'perf trace'
bpf loader noticed and created a "struct bpf_map" associated that then got populated
by 'perf trace':
# perf trace --filter-pids 2469 -e tools/perf/examples/bpf/augmented_raw_syscalls.c
0.020 ( 0.002 ms): gnome-shell/1663 epoll_pwait(epfd: 12<anon_inode:[eventpoll]>, events: 0x7ffd8f3ef960, maxevents: 32, sigsetsize: 8) = 1
0.025 ( 0.002 ms): gnome-shell/1663 read(fd: 24</dev/input/event4>, buf: 0x560c01bb8240, count: 8112) = 48
0.029 ( 0.001 ms): gnome-shell/1663 read(fd: 24</dev/input/event4>, buf: 0x560c01bb8258, count: 8088) = -1 EAGAIN Resource temporarily unavailable
0.032 ( 0.001 ms): gnome-shell/1663 read(fd: 24</dev/input/event4>, buf: 0x560c01bb8240, count: 8112) = -1 EAGAIN Resource temporarily unavailable
0.040 ( 0.003 ms): gnome-shell/1663 recvmsg(fd: 46<socket:[35893]>, msg: 0x7ffd8f3ef950) = -1 EAGAIN Resource temporarily unavailable
21.529 ( 0.002 ms): gnome-shell/1663 epoll_pwait(epfd: 5<anon_inode:[eventpoll]>, events: 0x7ffd8f3ef960, maxevents: 32, sigsetsize: 8) = 1
21.533 ( 0.004 ms): gnome-shell/1663 recvmsg(fd: 82<socket:[42826]>, msg: 0x7ffd8f3ef7b0, flags: DONTWAIT|CMSG_CLOEXEC) = 236
21.581 ( 0.006 ms): gnome-shell/1663 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffd8f3ef060) = 0
21.605 ( 0.020 ms): gnome-shell/1663 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_CREATE, arg: 0x7ffd8f3eeea0) = 0
21.626 ( 0.119 ms): gnome-shell/1663 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffd8f3eee94) = 0
21.746 ( 0.081 ms): gnome-shell/1663 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_PWRITE, arg: 0x7ffd8f3eeea0) = 0
^C
Oops, yet another gnome process that is involved with the output that
'perf trace' generates, lets filter that out too:
# perf trace --filter-pids 2469,1663 -e tools/perf/examples/bpf/augmented_raw_syscalls.c
? ( ): wpa_supplicant/1366 ... [continued]: select()) = 0 Timeout
0.006 ( 0.002 ms): wpa_supplicant/1366 clock_gettime(which_clock: BOOTTIME, tp: 0x7fffe5b1e430) = 0
0.011 ( 0.001 ms): wpa_supplicant/1366 clock_gettime(which_clock: BOOTTIME, tp: 0x7fffe5b1e3e0) = 0
0.014 ( 0.001 ms): wpa_supplicant/1366 clock_gettime(which_clock: BOOTTIME, tp: 0x7fffe5b1e430) = 0
? ( ): gmain/1791 ... [continued]: poll()) = 0 Timeout
0.017 ( ): wpa_supplicant/1366 select(n: 6, inp: 0x55646fed3ad0, outp: 0x55646fed3b60, exp: 0x55646fed3bf0, tvp: 0x7fffe5b1e4a0) ...
157.879 ( 0.019 ms): gmain/1791 inotify_add_watch(fd: 8<anon_inode:inotify>, pathname: , mask: 16789454) = -1 ENOENT No such file or directory
? ( ): cupsd/1001 ... [continued]: epoll_pwait()) = 0
? ( ): gsd-color/1908 ... [continued]: poll()) = 0 Timeout
499.615 ( ): cupsd/1001 epoll_pwait(epfd: 4<anon_inode:[eventpoll]>, events: 0x557a21166500, maxevents: 4096, timeout: 1000, sigsetsize: 8) ...
586.593 ( 0.004 ms): gsd-color/1908 recvmsg(fd: 3<socket:[38074]>, msg: 0x7ffdef34e800) = -1 EAGAIN Resource temporarily unavailable
? ( ): fwupd/2230 ... [continued]: poll()) = 0 Timeout
? ( ): rtkit-daemon/906 ... [continued]: poll()) = 0 Timeout
? ( ): rtkit-daemon/907 ... [continued]: poll()) = 1
724.603 ( 0.007 ms): rtkit-daemon/907 read(fd: 6<anon_inode:[eventfd]>, buf: 0x7f05ff768d08, count: 8) = 8
? ( ): ssh/5461 ... [continued]: select()) = 1
810.431 ( 0.002 ms): ssh/5461 clock_gettime(which_clock: BOOTTIME, tp: 0x7ffd7f39f870) = 0
^C
Several syscall exit events for syscalls in flight when 'perf trace' started, etc. Saner :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3tu5yg204p5mvr9kvwew07n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This makes the augmented_syscalls support the --filter-pids and
auto-filtered feedback loop pids just like when working without BPF,
i.e. with just raw_syscalls:sys_{enter,exit} and tracepoint filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zc5n453sxxm0tz1zfwwelyti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Lookup for the first map named "filtered_pids" and, if augmenting
syscalls, i.e. if a BPF event is present and the
"__augmented_syscalls__" is present, then fill in that map with the pids
to filter, be it feedback loop ones (perf trace's pid, its father if it
is "sshd", more auto-filtered in the future) or the ones explicitely
stated in the tool command line via --filter-pids.
The code to actually fill in the map comes next.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rhzytmw7qpe6lqyjxi1ded9t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As we'll need that name for a new function to set filters for both
tracepoints and BPF maps for filtering pids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mdkck6hf3fnd21rz2766280q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To better reflect that this is a tracepoint filter, as opposed, for
instance to map based BPF filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9138svli6ddcphrr3ymy9oy3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just to test filtering a bunch of pids, now its time to go and get that
hooked up in 'perf trace', right after we load the bpf program, if we
find a "pids_filtered" map defined, we'll populate it with the filtered
pids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1i9s27wqqdhafk3fappow84x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
filter
When testing system wide tracing without filtering the syscalls called
by 'perf trace' itself we get into a feedback loop, drop for now those
two syscalls, that are the ones that 'perf trace' does in its loop for
writing the syscalls it intercepts, to help with testing till we get
that filtering in place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rkbu536af66dbsfx51sr8yof@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Will be used in the augmented_raw_syscalls.c to implement 'perf trace
--filter-pids'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9sybmz4vchlbpqwx2am13h9e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Starting with a helper for a basic pid_map(), a hash using a pid as a
key.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-gdwvq53wltvq6b3g5tdmh0cw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Leftover from when we started augmented_raw_syscalls.c from
tools/perf/examples/bpf/augmented_syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: e58a0322dbac ("perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}")
Link: https://lkml.kernel.org/n/tip-pmts9ls2skh8n3zisb4txudd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just to show where we'll hook pid based filters, and what we use to
obtain the current pid, using a BPF getpid() equivalent.
Now we need to remove that hardcoded PID with a BPF hash map, so that we
start by filtering 'perf trace's own PID, implement the --filter-pid
functionality, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oshrcgcekiyhd0whwisxfvtv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Start with a getpid() function wrapping BPF_FUNC_get_current_pid_tgid,
idea is to mimic the system headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zo8hv22onidep7tm785dzxfk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
- Update kernel ABI headers, one of them lead to a small change in
the ioctl 'cmd' beautifier in 'perf trace' to support the new ISO7816
commands. (Arnaldo Carvalho de Melo)
- Restore proper cwd on return from mnt namespace (Jiri Olsa)
- Add feature check for the get_current_dir_name() function used in the
namespace fix from Jiri, that is not available in systems such as
Alpine Linux, which uses the musl libc (Arnaldo Carvalho de Melo)
- Fix crash in 'perf record' when synthesizing the unit for events such
as 'cpu-clock' (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull NVMe fix from Christoph.
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvme-fc: resolve io failures during connect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 4.20-rc4 from Shuah Khan:
"This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov."
* tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
|
|
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f43348a3db89305bb1935da9fe4499fdcdde9796)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fa6af5145b4e87a30a530be0d80734a9dd40da77)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.
Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.
Fix the device tree, and the performance of Flash access is improved.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When decoding a lower file handle, we first call ovl_check_origin_fh()
with connected=false to get any real lower dentry for overlay inode
cache lookup.
If the real dentry is a disconnected dir dentry, ovl_check_origin_fh()
is called again with connected=true to get a connected real dentry
and find the lower layer the real dentry belongs to.
If the first call returned a connected real dentry, we use it to
lookup an overlay connected dentry, but the first ovl_check_origin_fh()
call with connected=false did not check that the found dentry is under
the root of the layer (see ovl_acceptable()), it only checked that
the found dentry super block matches the uuid of the lower file handle.
In case there are multiple lower layers on the same fs and the found
dentry is not from the top most lower layer, using the layer index
returned from the first ovl_check_origin_fh() is wrong and we end
up failing to decode the file handle.
Fix this by always calling ovl_check_origin_fh() with connected=true
if we got a directory dentry in the first call.
Fixes: 8b58924ad55c ("ovl: lookup in inode cache first when decoding...")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Writeback connectors do not produce any on-screen output and require
special care for use. Such connectors are hidden from enumeration in
DRM resources by default, but they are still picked-up by fbdev.
This makes rather little sense since fbdev is not really adapted for
dealing with writeback.
Moreover, this is also a source of issues when userspace disables the
CRTC (and associated plane) without detaching the CRTC from the
connector (which is hidden by default). In this case, the connector is
still using the CRTC, leading to am "enabled/connectors mismatch" and
eventually the failure of the associated atomic commit. This situation
happens with VC4 testing under IGT GPU Tools.
Filter out writeback connectors in the fbdev helper to solve this.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Fixes: 935774cd71fe ("drm: Add writeback connector type")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
|
|
Found by smatch:
drivers/gpu/drm/i915/gvt/gtt.c:2452 intel_vgpu_destroy_ggtt_mm() error: dereferencing freed memory 'pos'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Certain firmware configurations "protect" clks and cause the entire
system to reboot when a non-secure OS such as Linux tries to read or
write protected clk registers. But other firmware configurations allow
reading or writing the same registers, and they may actually require
that the OS use the otherwise locked down clks. Support the
'protected-clocks' property by never registering these protected clks
with the common clk framework. This way, when firmware is protecting
these clks we won't have the chance to ever read or write these
registers and take down the entire system.
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a generic clk property for clks which are not intended to be used by
the OS due to security restrictions put in place by firmware. For
example, on some Qualcomm firmwares reading or writing certain clk
registers causes the entire system to reboot, but on other firmwares
reading and writing those same registers is required to make devices
like QSPI work. Rather than adding one-off properties each time a new
set of clks appears to be protected, let's add a generic clk property to
describe any set of clks that shouldn't be touched by the OS. This way
we never need to register the clks or use them in certain firmware
configurations.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Tune1 register on sdm845 is used to update HSTX_TRIM with fused
setting. Enable same by specifying update_tune1_with_efuse flag
for sdm845, otherwise driver ends up programming tune2 register.
Fixes: ef17f6e212ca ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845")
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Fix HSTX_TRIM tuning logic which instead of using fused value
as HSTX_TRIM, incorrectly performs bitwise OR operation with
existing default value.
Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Under moderate amounts of GPU stress, we can observe on Bearlake and
Pineview (later gen3 models) that we execute the following batch buffer
before the write into the batch is coherent. Adding extra (tested with
upto 32x) MI_FLUSH to either the invalidation, flush or both phases does
not solve the incoherency issue with the relocations, but emitting the
MI_STORE_DWORD_IMM twice does. So be it.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
(cherry picked from commit 7fa28e146994da1e8a4124623d7da97b798ea520)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
after 'police' configuration parameters were converted to use RCU instead
of spinlock, the state variables used to compute the traffic rate (namely
'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in
the traffic path without any protection.
Use a dedicated spinlock to avoid race conditions on these variables, and
ensure proper cache-line alignment. In this way, 'police' is still faster
than what we observed when 'tcf_lock' was used in the traffic path _ i.e.
reverting commit 2d550dbad83c ("net/sched: act_police: don't use spinlock
in the data path"). Moreover, we preserve the throughput improvement that
was obtained after 'police' started using per-cpu counters, when 'avrate'
is used instead of 'rate'.
Changes since v1 (thanks to Eric Dumazet):
- call ktime_get_ns() before acquiring the lock in the traffic path
- use a dedicated spinlock instead of tcf_lock
- improve cache-line usage
Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path")
Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 4.20:
- Re-enable the Cavium Octeon USB driver in its defconfig after it
was accidentally removed back in 4.14.
- Have early memblock allocations be performed bottom-up to more
closely match the behaviour we used to have with bootmem, which
seems a safer choice since we've seen fallout from the change made
in the 4.20 merge window.
- Simplify max_low_pfn calculation in the NUMA code for the Loongson3
and SGI IP27 platforms to both clean up the code & ensure
max_low_pfn has been set appropriately before it is used"
* tag 'mips_fixes_4.20_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation
MIPS: Let early memblock_alloc*() allocate memories bottom-up
MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver
|
|
Meanwhile I know the driver quite well and I refactored bigger parts
of it. As a result people contact me already with r8169 questions.
Therefore I'd volunteer to become co-maintainer of the driver also
officially.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to the register name and setting change of HDP
memory light sleep on Vega20,change accordingly in
the driver.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The last AG may be very small comapred to all other AGs, and hence
AG reservations based on the superblock AG size may actually consume
more space than the AG actually has. This results on assert failures
like:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
[ 48.932891] xfs_ag_resv_init+0x1bd/0x1d0
[ 48.933853] xfs_fs_reserve_ag_blocks+0x37/0xb0
[ 48.934939] xfs_mountfs+0x5b3/0x920
[ 48.935804] xfs_fs_fill_super+0x462/0x640
[ 48.936784] ? xfs_test_remount_options+0x60/0x60
[ 48.937908] mount_bdev+0x178/0x1b0
[ 48.938751] mount_fs+0x36/0x170
[ 48.939533] vfs_kern_mount.part.43+0x54/0x130
[ 48.940596] do_mount+0x20e/0xcb0
[ 48.941396] ? memdup_user+0x3e/0x70
[ 48.942249] ksys_mount+0xba/0xd0
[ 48.943046] __x64_sys_mount+0x21/0x30
[ 48.943953] do_syscall_64+0x54/0x170
[ 48.944835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Hence we need to ensure the finobt per-ag space reservations take
into account the size of the last AG rather than treat it like all
the other full size AGs.
Note that both refcountbt and rmapbt already take the size of the AG
into account via reading the AGF length directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When retrying a failed inode or dquot buffer,
xfs_buf_resubmit_failed_buffers() clears all the failed flags from
the inde/dquot log items. In doing so, it also drops all the
reference counts on the buffer that the failed log items hold. This
means it can drop all the active references on the buffer and hence
free the buffer before it queues it for write again.
Putting the buffer on the delwri queue takes a reference to the
buffer (so that it hangs around until it has been written and
completed), but this goes bang if the buffer has already been freed.
Hence we need to add the buffer to the delwri queue before we remove
the failed flags from the log items attached to the buffer to ensure
it always remains referenced during the resubmit process.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Useless:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
Useful:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0x200b5 nblks 0x1 ...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
coalescing
During tcp coalescing ensure that the skb hardware timestamp refers to the
highest sequence number data.
Previously only the software timestamp was updated during coalescing.
Signed-off-by: Stephen Mallon <stephen.mallon@sydney.edu.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change
ring and flow control paths. This patch solves the RX hang while doing
continuous ring or flow control parameters with heavy traffic from peer.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name(). In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table(). The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.
Fix by copying the search string instead of modifying it in place.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
handling
Kyle Huey reported that 'rr', a replay debugger, broke due to the following commit:
af3bdb991a5c ("perf/x86/intel: Add a separate Arch Perfmon v4 PMI handler")
Rework the 'disable_counter_freezing' __setup() parameter such that we
can explicitly enable/disable it and switch to default disabled.
To this purpose, rename the parameter to "perf_v4_pmi=" which is a much
better description and allows requiring a bool argument.
[ mingo: Improved the changelog some more. ]
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/20181120170842.GZ2131@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The size passed to memchr is too large as it assumes the search
starts at the start of the buffer, but it can start at an offset.
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Mention that the request validation should increment the memory refcount
of reference buffers so we don't forget to do this.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
