summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-19drm/amd/display: add debug option for dramclk_change_latency in apuCharlene Liu
[Why & How] Support dramclk change latency change via debug option and add some code isolation. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Fix pipe split predictionAlvin Lee
[Why & How] - Pipe split prediction previously only took into account MPC split. We must also consider when ODM combine is required, and when we apply ODM combine by policy. - Also re-work DET allocation function as it wasn't properly splitting the DET per stream, per plane. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Remove some unused definitions from DCN32/321Aurabindo Pillai
[Why&How] After reg offset initialization was switched to runtime rather than compile time, some of the defintions are not needed anymore and can be removed. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Port DCN30 420 logic to DCN32Chris Park
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: clean up some inconsistent indentingsYang Li
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdkfd: Fix spelling mistake "detroyed" -> "destroyed"Colin Ian King
There is a spelling mistake in a pr_debug message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: add rlcv/rlcp version info to debugfsHawking Zhang
amdgpu_firmware_info debugfs will show rlcv/rlcp ucode version info Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: add two new subquery idsHawking Zhang
To support query rlcp and rlcv firmware version from existing AMDGPU_INFO_FW_VERSION interface Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: support print rlc v2_x ucode hdrHawking Zhang
add rlc v2_x support to print_rlc_hdr helper Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfxHawking Zhang
cache rlcv/rlcvp ucode version info in amdgpu_gfx structure Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdkfd: Use the consolidated MQD manager functions for GFX11Shiwu Zhang
To remove duplication for GFX11 as well, use the common MQD manager functions defined in kfd_mqd_manager.c for all version of managers Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: Update PTE flags with TF enabledMukul Joshi
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: SDMA update use unlocked iteratorPhilip Yang
SDMA update page table may be called from unlocked context, this generate below warning. Use unlocked iterator to handle this case. WARNING: CPU: 0 PID: 1475 at drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next Call Trace: dma_resv_iter_first+0x43/0xa0 amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu] amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu] amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu] svm_range_unmap_from_gpus+0x115/0x300 [amdgpu] svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu] __mmu_notifier_invalidate_range_start+0x1d3/0x230 unmap_vmas+0x140/0x150 unmap_region+0xa8/0x110 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19dma-buf: fix dma_fence_default_wait() signaling checkChristian König
That check must now come after grabing the spinlock, not before. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: b96fb1e724ae ("dma-buf: dma_fence_wait must enable signaling") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919120618.113332-1-christian.koenig@amd.com
2022-09-19Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting"Robert Foss
Revert this patch since it depends on devicetree functionality that previously has been reverted in the below commit. commit e798ba3374a1 ("Revert "dt-bindings: Add byteswap order to chrontel ch7033"") This reverts commit ce9564cfc9aea65e68eb343c599317633bc2321a. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-3-robert.foss@linaro.org
2022-09-19Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector ↵Robert Foss
operations for DP"" This commit was accidentally reverted instead of another commit, and therefore needs to be reinstated. This reverts commit 8c9c40ec83445b188fb6b59e119bf5c2de81b02d. Fixes: 8c9c40ec8344 ("Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"") Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-2-robert.foss@linaro.org
2022-09-19drm/mediatek: dp: change mtk_dp_driver to staticYang Yingliang
mtk_dp_driver is only used in mtk_dp.c now, change it to static. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220913134929.1970187-1-yangyingliang@huawei.com
2022-09-19drm/mediatek: dp: Fix compiler warning in mtk_dp_video_mute()Bo-Chen Chen
Fix debug message formatting by using %s instead of 0x%x. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Reported-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-4-rex-bc.chen@mediatek.com
2022-09-19drm/mediatek: dp: Remove unused register definitionsBo-Chen Chen
Some definitions in mtk_dp_reg.h are not used, so remove these redundant codes. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-3-rex-bc.chen@mediatek.com
2022-09-19drm/mediatek: dp: Reduce indentation in mtk_dp_bdg_detect()Bo-Chen Chen
In order to improve human readability, reduce the indentation by returning early if the dp/edp cable is not plugged in. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-2-rex-bc.chen@mediatek.com
2022-09-18drm/gma500: Call acpi_video_register_backlight()Hans de Goede
On machines without an Intel video opregion the acpi_video driver immediately probes the ACPI video bus and used to also immediately register acpi_video# backlight devices when supported. Once the drm/kms driver then loaded later and possibly registered a native backlight device then the drivers/acpi/video_detect.c code unregistered the acpi_video0 device to avoid there being 2 backlight devices (when acpi_video_get_backlight_type()==native). This means that userspace used to briefly see 2 devices and the disappearing of acpi_video0 after a brief time confuses the systemd backlight level save/restore code, see e.g.: https://bbs.archlinux.org/viewtopic.php?id=269920 To fix this the ACPI video code has been modified to make backlight class device registration a separate step, relying on the drm/kms driver to ask for the acpi_video backlight registration after it is done setting up its native backlight device. Add a call to the new acpi_video_register_backlight() function after setting up the gma500's native backlight, so that the acpi_video backlight device gets registered on systems where the gma500's native backlight device is not registered. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-6-hdegoede@redhat.com
2022-09-18drm/gma500: Don't register backlight when another backlight should be usedHans de Goede
Before this commit when we want userspace to use the acpi_video backlight device we register both the GPU's native backlight device and acpi_video's firmware acpi_video# backlight device. This relies on userspace preferring firmware type backlight devices over native ones. Registering 2 backlight devices for a single display really is undesirable, don't register the GPU's native backlight device when another backlight device should be used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-5-hdegoede@redhat.com
2022-09-18drm/gma500: Use backlight_get_brightness() to get the brightnessHans de Goede
Use backlight_get_brightness() instead of directly referencing bd->props.brightness. This will take backlight_is_blank() into account, properly setting brightness to 0 when screen-blanking has been requested through the backlight sysfs interface. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-4-hdegoede@redhat.com
2022-09-18drm/gma500: Change registered backlight device type to raw/nativeHans de Goede
Change the type for the registered backlight class device from platform to raw/native. The poulsbo/cedarview/oaktrail backlight support is using native GPU backlight control and as such the type should be raw (aka native) as is done by all the other native GPU backlight driver code. Note this will not change much from userspace's point of view. poulsbo/cedarview laptops typically offer both an ACPI-video backlight interface as well as the native GPU backlight interface. The /sys/class/backlight/acpi_video0 has a type of firmware and userspace typically looks for firmware devices before looking for platform devices. The typical standard lookup order is: firmware -> platform -> raw This means that both before and after this change typical userspace backlight consumers (sich as e.g. GNOME) will prefer the firmware acpi_video0 backlight device. This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview) and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-3-hdegoede@redhat.com
2022-09-18drm/gma500: Refactor backlight support (v2)Hans de Goede
Refactor backlight support so that the gma_backlight_enable() / gma_backlight_disable() / gma_backlight_set() functions used by the Opregion handle will also work if no backlight_device gets registered. This is a preparation patch for not registering the gma500's own backlight device when acpi_video should be used, since registering 2 backlight devices for a single display really is undesirable. Since the acpi-video interface often uses the OpRegion we need to keep the OpRegion functional even when dev_priv->backlight_device is NULL. As a result of this refactor the actual backlight_device_register() call is moved to the shared backlight.c code and all #ifdefs related to CONFIG_BACKLIGHT_CLASS_DEVICE are now also limited to backlight.c . No functional changes intended. This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview) and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop. Changes in v2: - Fix unused variable warnings when CONFIG_BACKLIGHT is not selected by marking the 2 variables as __maybe_unused. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-2-hdegoede@redhat.com
2022-09-18drm/msm/hdmi: make hdmi_phy_8996 OF clk providerDmitry Baryshkov
On MSM8996 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8996 to use DT clocks properties (rather than global clock names), register the OF clock provider. While we are at it, also change the driver to use clk_parent_data rather parent_names to setup a link to the XO clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492318/ Link: https://lore.kernel.org/r/20220704161148.814510-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18dt-bindings: phy: qcom, hdmi-phy-qmp: add clock-cells and XO clockDmitry Baryshkov
As the QMP HDMI PHY is a clock provider, add constant #clock-cells property. For the compatibility with older DTs the property is not marked as required. Also add the XO clock to the list of the clocks used by the driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/492316/ Link: https://lore.kernel.org/r/20220704161148.814510-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Remove use of device_node in dsi_host_parse_dt()Nathan Chancellor
Clang warns: drivers/gpu/drm/msm/dsi/dsi_host.c:1903:14: error: variable 'device_node' is uninitialized when used here [-Werror,-Wuninitialized] of_node_put(device_node); ^~~~~~~~~~~ drivers/gpu/drm/msm/dsi/dsi_host.c:1870:44: note: initialize the variable 'device_node' to silence this warning struct device_node *endpoint, *device_node; ^ = NULL 1 error generated. device_node's assignment was removed but not all of its uses. Remove the call to of_node_put() and the variable declaration to clean up the warning. Fixes: 36246dd50225 ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE") Link: https://github.com/ClangBuiltLinux/linux/issues/1700 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/500182/ Link: https://lore.kernel.org/r/20220829165450.217628-1-nathan@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: switch to DRM_PANEL_BRIDGEDmitry Baryshkov
Currently the DSI driver has two separate paths: one if the next device in a chain is a bridge and another one if the panel is connected directly to the DSI host. Simplify the code path by using panel-bridge driver (already selected in Kconfig) and dropping support for handling the panel directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493608/ Link: https://lore.kernel.org/r/20220712132258.671263-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/panel: drop DSC pps pointerDmitry Baryshkov
Complete the move of DSC data pointer from struct drm_panel to struct mipi_dsi_device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493309/ Link: https://lore.kernel.org/r/20220711094320.368062-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: fetch DSC pps payload from struct mipi_dsi_deviceDmitry Baryshkov
Now that struct mipi_dsi_device provides DSC data, fetch it from the mentioned struct rather than from the struct drm_panel itself. This would allow supporting MIPI DSI bridges handling DSC on their input side. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493307/ Link: https://lore.kernel.org/r/20220711094320.368062-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/mipi-dsi: pass DSC data through the struct mipi_dsi_deviceDmitry Baryshkov
The commit 0f40ba48de3b ("drm/msm/dsi: Pass DSC params to drm_panel") added a pointer to the DSC data to the struct drm_panel. However DSC support is not limited to the DSI panels. MIPI DSI bridges can also consume DSC command streams. Thus add struct drm_dsc_config pointer to the struct mipi_dsi_device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493306/ Link: https://lore.kernel.org/r/20220711094320.368062-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Remove the unneeded result variableye xingchen
Return the value msm_dsi_phy_enable() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/499621/ Link: https://lore.kernel.org/r/20220826072821.253150-1-ye.xingchen@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: drop the hpd workerDmitry Baryshkov
It makes no sense to have the HPD worker in the MSM DSI driver anymore. It is only queued from the dsi_host_attach/detach() callbacks, where it plays no useful role. Either way the panel or next bridge will be present and will report it's status directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498740/ Link: https://lore.kernel.org/r/20220822174417.292926-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Improve dsi_phy_driver_probe() probe error handlingDouglas Anderson
The dsi_phy_driver_probe() function has a "goto fail" for no reason. Change it to just always return directly when it sees an error. Make this simpler by leveraging dev_err_probe() which is designed to make code like this shorter / simpler. NOTE: as part of this, we now pass through error codes directly from msm_ioremap_size() rather than translating to -ENOMEM. This changed mostly because it's much more convenient when using dev_err_probe() and also it's usually encouraged not to hide error codes like the old code was doing unless there is a good reason. I can't see any reason why we'd need to return -ENOMEM instead of -EINVAL from the probe function. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496324/ Link: https://lore.kernel.org/r/20220804073608.v4.6.I969118a35934a0e5007fe4f80e3e28e9c0b7602a@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Take advantage of devm_regulator_bulk_get_const()Douglas Anderson
As of the commit 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") we no longer need to do copying of regulator bulk data from initdata to something dynamic. Let's take advantage of that. In addition to saving some code, this also moves us to using ARRAY_SIZE() to specify how many regulators we have which is less error prone. This gets rid of some layers of wrappers which makes it obvious that we can get rid of an extra error print. devm_regulator_bulk_get_const() prints errors for you so you don't need an extra layer of printing. In all cases here I have preserved the old settings without any investigation about whether the loads being set are sensible. In the cases of some of the PHYs if several PHYs in the same file used exactly the same settings I had them point to the same data structure. NOTE: Though I haven't done the math, this is likely an overall savings in terms of "static const" data. We previously always allocated space for 8 supplies. Each of these supplies took up 36 bytes of data (32 for name, 4 for an int). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496325/ Link: https://lore.kernel.org/r/20220804073608.v4.5.I55a9e65cb1c22221316629e98768ff473f47a067@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Use the new regulator bulk feature to specify the loadDouglas Anderson
As of commit 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API") we can now specify the initial load in the bulk data rather than having to manually call regulator_set_load() on each regulator. Let's use it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496319/ Link: https://lore.kernel.org/r/20220804073608.v4.4.I7b3c72949883846badb073cfeae985c55239da1d@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Don't set a load before disabling a regulatorDouglas Anderson
As of commit 5451781dadf8 ("regulator: core: Only count load for enabled consumers"), a load isn't counted for a disabled regulator. That means all the code in the DSI driver to specify and set loads before disabling a regulator is not actually doing anything useful. Let's remove it. It should be noted that all of the loads set that were being specified were pointless noise anyway. The only use for this number is to pick between low power and high power modes of regulators. Regulators appear to do this changeover at loads on the order of 10000 uA. You would need a lot of clients of the same rail for that 100 uA number to count for anything. Note that now that we get rid of the setting of the load at disable time, we can just set the load once when we first get the regulator and then forget it. It should also be noted that the regulator functions regulator_bulk_enable() and regulator_set_load() already print error messages when they encounter problems so while moving things around we get rid of some extra error prints. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496320/ Link: https://lore.kernel.org/r/20220804073608.v4.3.If1f94fbbdb7c1d0fb3961de61483a851ad1971a7@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_7nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491927/ Link: https://lore.kernel.org/r/20220629225331.357308-12-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_10nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491923/ Link: https://lore.kernel.org/r/20220629225331.357308-11-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_14nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491921/ Link: https://lore.kernel.org/r/20220629225331.357308-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491925/ Link: https://lore.kernel.org/r/20220629225331.357308-9-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm_8960: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491929/ Link: https://lore.kernel.org/r/20220629225331.357308-8-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi/phy: Replace hardcoded char-array length with sizeof()Marijn Suijten
Now that the last DSI PHY PLL driver (dsi_phy_28nm_8960) has been converted to use a simple stack-local char-array instead of a devm_kzalloc heap allocation we can safely call sizeof() on every string variable (that's now a sized array instead of a pointer) passed into snprintf instead of hardcoding the size. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491920/ Link: https://lore.kernel.org/r/20220629225331.357308-7-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm_8960: Use stack memory for temporary clock namesMarijn Suijten
The clock names formatted into the hw_clk's init structure are only used for the duration of the registration function where they are kstrdup'ed, making it unnecessary to keep the allocations alive for the duration of the device (through devm). Just like the other DSI PHY PLL clock trees, use a stack-local char array and save on memory outside of the pll_28nm_register function. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491917/ Link: https://lore.kernel.org/r/20220629225331.357308-6-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit (git 2.34.1) at 2025-09-12 21:57:52 +0000