| Age | Commit message (Collapse) | Author |
|---|
|
Airoha AN7583 SoC have 3 different MDIO Controller. One comes from
the intergated Switch based on MT7530. The other 2 live under the SCU
register and expose 2 dedicated MDIO controller.
Document the schema for the 2 dedicated MDIO controller.
Each MDIO controller can be independently reset with the SoC reset line.
Each MDIO controller have a dedicated clock configured to 2.5MHz by
default to follow MDIO bus IEEE 802.3 standard.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression where wp512 can no longer be used with hmac"
* tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: wp512 - Use API partial block handling
|
|
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
|
|
Thomas Gleixner says:
====================
ptp: Belated spring cleaning of the chardev driver
When looking into supporting auxiliary clocks in the PTP ioctl, the
inpenetrable ptp_ioctl() letter soup bothered me enough to clean it up.
The code (~400 lines!) is really hard to follow due to a gazillion of
local variables, which are only used in certain case scopes, and a
mixture of gotos, breaks and direct error return paths.
Clean it up by splitting out the IOCTL functionality into seperate
functions, which contain only the required local variables and are trivial
to follow. Complete the cleanup by converting the code to lock guards and
get rid of all gotos.
That reduces the code size by 48 lines and also the binary text size is
80 bytes smaller than the current maze.
The series is split up into one patch per IOCTL command group for easy
review.
v1: https://lore.kernel.org/20250620130144.351492917@linutronix.de
====================
Link: https://patch.msgid.link/20250625114404.102196103@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mixture of gotos and direct return codes is inconsistent and just makes
the code harder to read. Let it consistently return error codes directly and
tidy the code flow up accordingly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250625115133.486953538@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the various spin_lock_irqsave() protected critical regions to
scoped guards. Use spinlock_irq instead of spinlock_irqsave as all the
functions are invoked in thread context with interrupts enabled.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250625115133.425029269@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Finish the ptp_ioctl() cleanup by splitting out the PTP_MASK_EN_SINGLE
ioctl code and removing the remaining local variables and return
statements.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115133.364422719@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_MASK_CLEAR_ALL ioctl
code into a helper function.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115133.302755618@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_PIN_SETFUNC ioctl
code into a helper function. Convert to lock guard while at it and remove
the pointless memset of the pd::rsv because nothing uses it.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115133.241503804@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_PIN_GETFUNC ioctl
code into a helper function. Convert to lock guard while at it and remove
the pointless memset of the pd::rsv because nothing uses it.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115133.177265865@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_SYS_OFFSET ioctl
code into a helper function.
Convert it to __free() to avoid gotos.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250625115133.113841216@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the
PTP_SYS_OFFSET_EXTENDED ioctl code into a helper function.
Convert it to __free() to avoid gotos.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115133.050445505@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_SYS_OFFSET_PRECISE
ioctl code into a helper function.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115132.986897454@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_ENABLE_PPS
ioctl code into a helper function. Convert to a lock guard while at it.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115132.923803136@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_PEROUT_REQUEST
ioctl code into a helper function. Convert to a lock guard while at it.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115132.860150473@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Continue the ptp_ioctl() cleanup by splitting out the PTP_EXTTS_REQUEST
ioctl code into a helper function. Convert to a lock guard while at it.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115132.797588258@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptp_ioctl() is an inpenetrable letter soup with a gazillion of case (scope)
specific variables defined at the top of the function and pointless breaks
and gotos.
Start cleaning it up by splitting out the PTP_CLOCK_GETCAPS ioctl code into
a helper function. Use a argument pointer with a single sparse compliant
type cast instead of proliferating the type cast all over the place.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250625115132.733409073@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
setup_wait() takes an optional argument and then is called from the top
level of the test script. That confuses shellcheck, which thinks that maybe
the intention is to pass $1 of the script to the function, which is never
the case. To avoid having to annotate every single new test with a SC
disable, split the function in two: one that takes a mandatory argument,
and one that takes no argument at all.
Convert the two existing users of that optional argument, both in Spectrum
resource selftest, to use the new form. Clean up vxlan_bridge_1q_mc_ul.sh
to not pass a now-unused argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/8e13123236fe3912ae29bc04a1528bdd8551da1f.1750847794.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is unused since commit f04565ddf52e ("dev: use name hash for
dev_seq_ops")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250625102155.483570-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lwtunnel_build_state() has check validity of encap_type,
so no need to do this before call it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250625022059.3958215-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-06-27
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 120 insertions(+), 20 deletions(-).
The main changes are:
1) Fix RCU usage in task_cls_state() for BPF programs using helpers like
bpf_get_cgroup_classid_curr() outside of networking, from Charalampos
Mitrodimas.
2) Fix a sockmap race between map_update and a pending workqueue from
an earlier map_delete freeing the old psock where both pointed to the
same psock->sk, from Jiayuan Chen.
3) Fix a data corruption issue when using bpf_msg_pop_data() in kTLS which
failed to recalculate the ciphertext length, also from Jiayuan Chen.
4) Remove xdp_redirect_map{,_err} trace events since they are unused and
also hide XDP trace events under CONFIG_BPF_SYSCALL, from Steven Rostedt.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
xdp: tracing: Hide some xdp events under CONFIG_BPF_SYSCALL
xdp: Remove unused events xdp_redirect_map and xdp_redirect_map_err
net, bpf: Fix RCU usage in task_cls_state() for BPF programs
selftests/bpf: Add test to cover ktls with bpf_msg_pop_data
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls
bpf, sockmap: Fix psock incorrectly pointing to sk
====================
Link: https://patch.msgid.link/20250626230111.24772-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_qdma_fill_rx_queue()
Since the page_pool for airoha_eth driver is created with
PP_FLAG_DMA_SYNC_DEV flag, we do not need to sync_for_device each page
received from the pool since it is already done by the page_pool codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250625-airoha-sync-for-device-v1-1-923741deaabf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix build errors when CONFIG_NET_SHAPER is disabled, including:
drivers/net/ethernet/microsoft/mana/mana_en.c:804:10: error:
'const struct net_device_ops' has no member named 'net_shaper_ops'
804 | .net_shaper_ops = &mana_shaper_ops,
drivers/net/ethernet/microsoft/mana/mana_en.c:804:35: error:
initialization of 'int (*)(struct net_device *, struct neigh_parms *)'
from incompatible pointer type 'const struct net_shaper_ops *'
[-Werror=incompatible-pointer-types]
804 | .net_shaper_ops = &mana_shaper_ops,
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Fixes: 75cabb46935b ("net: mana: Add support for net_shaper_ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506230625.bfUlqb8o-lkp@intel.com/
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1750851355-8067-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for stalls during suspend/resume cycles with hid-nintendo (Daniel
J. Ogorchock)
- memory leak and reference count fixes in hid-wacom and in-appletb-kdb
(Qasim Ijaz)
- race condition (leading to kernel crash) fix during device removal in
hid-wacom (Thomas Zeitlhofer)
- fix for missed interrupt in intel-thc-hid (Intel-thc-hid:)
- support for a bunch of new device IDs
* tag 'hid-for-linus-2025062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2
HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting
HID: wacom: fix crash in wacom_aes_battery_handler()
HID: intel-ish-hid: ipc: Add Wildcat Lake PCI device ID
hid: intel-ish-hid: Use PCI_DEVICE_DATA() macro for ISH device table
HID: lenovo: Restrict F7/9/11 mode to compact keyboards only
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY
HID: input: lower message severity of 'No inputs registered, leaving' to debug
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
HID: Intel-thc-hid: Intel-quicki2c: Enhance QuickI2C reset flow
HID: nintendo: avoid bluetooth suspend/resume stalls
HID: wacom: fix kobject reference count leak
HID: wacom: fix memory leak on sysfs attribute creation failure
HID: wacom: fix memory leak on kobject creation failure
|
|
The DT bindings file "renesas,r9a09g057-gbeth.yaml" applies to a whole
family of SoCs, and uses "renesas,rzv2h-gbeth" as a fallback compatible
value. Hence rename it to the more generic "renesas,rzv2h-gbeth.yaml".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/721f6e0e09777e0842ecaca4578bc50c953d2428.1750838954.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Driver Changes:
- Missing error check (Haoxiang Li)
- Fix xe_hwmon_power_max_write (Karthik)
- Move flushes (Maarten and Matthew Auld)
- Explicitly exit CT safe mode on unwind (Michal)
- Process deferred GGTT node removals on device unwind (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aF1T6EzzC3xj4K4H@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFzsHR9WLYsxg8jy@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-25-25:
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250625151734.11537-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
|
|
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc4).
Conflicts:
Documentation/netlink/specs/mptcp_pm.yaml
9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names")
ec362192aa9e ("netlink: specs: fix up indentation errors")
https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au
Adjacent changes:
Documentation/netlink/specs/fou.yaml
791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names")
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
|
|
When performing a file read from RDMA, smbd_recv() prints an "Invalid msg
type 4" error and fails the I/O. This is due to the switch-statement there
not handling the ITER_FOLIOQ handed down from netfslib.
Fix this by collapsing smbd_recv_buf() and smbd_recv_page() into
smbd_recv() and just using copy_to_iter() instead of memcpy(). This
future-proofs the function too, in case more ITER_* types are added.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Talpey <tom@talpey.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/acb7f612-df26-4e2a-a35d-7cd040f513e1@samba.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Stefan Metzmacher <metze@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
Cc: linux-cifs@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data")
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The driver currently defaults to the internal oscillator as the clock
source for E825-C hardware. While this clock source is labeled TCXO,
indicating a temperature compensated oscillator, this is only true for some
board designs. Many board designs have a less capable oscillator. The
E825-C hardware may also have its clock source set to the TIME_REF pin.
This pin is connected to the DPLL and is often a more stable clock source.
The choice of the internal oscillator is not suitable for all systems,
especially those which want to enable SyncE support.
There is currently no interface available for users to configure the clock
source. Other variants of the E82x board have the clock source configured
in the NVM, but E825-C lacks this capability, so different board designs
cannot select a different default clock via firmware.
In most setups, the TIME_REF is a suitable default clock source.
Additionally, we now fall back to the internal oscillator automatically if
the TIME_REF clock source cannot be locked.
Change the default clock source for E825-C to TIME_REF. Note that the
driver logs a dev_dbg message upon configuring the TSPLL which includes the
clock source and frequency. This can be enabled to confirm which clock
source is in use.
Longterm a proper interface to dynamically introspect and change the clock
source will be designed (perhaps some extension of the DPLL subsystem?)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Initialize TSPLL after initializing PHC in ice_ptp.c instead of calling
for each product in PHC init in ice_ptp_hw.c.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
TSPLL can fail when trying to lock to TIME_REF as a clock source, e.g.
when the external clock source is not stable or connected to the board.
To continue operation after failure, try to lock again to internal TCXO
and inform user about this.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To ensure proper operation, wait for 10 to 20 microseconds before
enabling TSPLL.
Adjust wait time after enabling TSPLL from 1-5 ms to 1-2 ms.
Those values are empirical and tested on multiple HW configurations.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add helpers for checking TSPLL params, disabling sticky bits,
configuring TSPLL and getting default clock frequency to simplify
the code flows.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Switch from unions with bitfield structs to definitions with bitfield
masks. This is necessary, because some registers have different
field definitions or even use a different register for the same fields
based on HW type.
Remove unused register fields.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After programming the TSPLL, re-read the registers before reporting status.
This ensures the debug log message will show what was actually programmed,
rather than relying on a cached value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When programming the Clock Generation Unit for E285-C hardware, we need
to clear the time_sync_en bit of the DWORD 9 before we set the
frequency.
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
While bdev_count_inflight is interating all cpus, if some IOs are issued
from traversed cpu and then completed from the cpu that is not traversed
yet:
cpu0
cpu1
bdev_count_inflight
//for_each_possible_cpu
// cpu0 is 0
infliht += 0
// issue a io
blk_account_io_start
// cpu0 inflight ++
cpu2
// the io is done
blk_account_io_done
// cpu2 inflight --
// cpu 1 is 0
inflight += 0
// cpu2 is -1
inflight += -1
...
In this case, the total inflight will be -1, causing lots of false
warning. Fix the problem by removing the warning.
Noted there is still a valid warning for nvme-mpath(From Yi) that is not
fixed yet.
Fixes: f5482ee5edb9 ("block: WARN if bdev inflight counter is negative")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#mae89155a5006463d0a21a4a2c35ae0034b26a339
Reported-and-tested-by: Calvin Owens <calvin@wbinvd.org>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#m1d935a00070bf95055d0ac84e6075158b08acaef
Reported-by: Dave Chinner <david@fromorbit.com>
Closes: https://lore.kernel.org/linux-block/aFuypjqCXo9-5_En@dread.disaster.area/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250626115743.1641443-1-yukuai3@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
" - reset delayed remove_work after reconnect (Keith Busch)
- fix atomic write size validation (Christoph Hellwig)"
* tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme:
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
|
|
Add additional checks that queue depth and number of queues are
non-zero.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes)
and this was leading to:
[ ] BUG: unable to handle page fault for address: ffffc900058162a0
[ ] #PF: supervisor write access in kernel mode
[ ] #PF: error_code(0x0002) - not-present page
[ ] Oops: Oops: 0002 [#1] SMP NOPTI
[ ] Tainted: [W]=WARN
[ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe]
[ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] xe_ggtt_clear+0xb0/0x270 [xe]
[ ] ggtt_node_remove+0xbb/0x120 [xe]
[ ] ggtt_node_remove_work_func+0x30/0x50 [xe]
[ ] process_one_work+0x22b/0x6f0
[ ] worker_thread+0x1e8/0x3d
Add managed-device action that will explicitly drain the workqueue
with all pending node removals prior to releasing MMIO/GSM mapping.
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com
(cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add missing default values for networking sysctl parameters and
standardize documentation:
- Use "0 (disabled)" / "1 (enabled)" format consistently
- Fix cipso_rbm_struct_valid -> cipso_rbm_strictvalid typo
- Convert fwmark_reflect description to enabled/disabled terminology
- Document possible values for tcp_autocorking
Also addresses formatting inconsistencies in touched parameters.
Signed-off-by: Abdelrahman Fekry <abdelrahmanfekry375@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20250624150923.40590-1-abdelrahmanfekry375@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jakub Kicinski says:
====================
eth: fbnic: trivial code tweaks
A handful of code cleanups. No functional changes.
====================
Link: https://patch.msgid.link/20250624142834.3275164-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
