| Age | Commit message (Collapse) | Author |
|---|
|
is_zero_pfn() does not work for the huge zero folio. Fix it by using
is_huge_zero_pmd().
This can cause the PAGEMAP_SCAN ioctl against /proc/pid/pagemap to
present pages as PAGE_IS_PRESENT rather than as PAGE_IS_PFNZERO.
Found by code inspection.
Link: https://lkml.kernel.org/r/20250617143532.2375383-1-david@redhat.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Jakub Kicinski says:
====================
netlink: specs: enforce strict naming of properties
I got annoyed once again by the name properties in the ethtool spec
which use underscore instead of dash. I previously assumed that there
is a lot of such properties in the specs so fixing them now would
be near impossible. On a closer look, however, I only found 22
(rough grep suggests we have ~4.8k names in the specs, so bad ones
are just 0.46%).
Add a regex to the JSON schema to enforce the naming, fix the few
bad names. I was hoping we could start enforcing this from newer
families, but there's no correlation between the protocol and the
number of errors. If anything classic netlink has more recently
added specs so it has fewer errors.
The regex is just for name properties which will end up visible
to the user (in Python or YNL CLI). I left the c-name properties
alone, those don't matter as much. C codegen rewrites them, anyway.
I'm not updating the spec for genetlink-c. Looks like it has no
users, new families use genetlink, all old ones need genetlink-legacy.
If these patches are merged I will remove genetlink-c completely
in net-next.
====================
Link: https://patch.msgid.link/20250624211002.3475021-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 4eb77b4ecd3c ("netlink: add a proto specification for FOU")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4ea7e38696c7 ("dropmon: add ability to detect when hardware
drops rx packets") introduced is_drop_point_hw, but the symbol was
never referenced anywhere in the kernel tree and is currently not used
by dropwatch. I could not find, to the best of my abilities, a current
out-of-tree user of this macro.
The definition also contains a syntax error in its for-loop, so any
project that tried to compile against it would fail. Removing the
macro therefore eliminates dead code without breaking existing
users.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250624165711.1188691-1-rubenkelevra@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
packing.h uses ARRAY_SIZE(), BUILD_BUG_ON_MSG(), min(), max(), and
sizeof_field() without including the headers where they are defined,
potentially causing build failures.
Fix this in packing.h and sort the result.
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250624-packing-includes-v1-1-c23c81fab508@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit c54e1d920f04 ("flow_offload: add ops to tc_action_ops for
flow action setup") these are unused.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250624014327.3686873-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'err' has been checked against 0 in the if statement.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624014216.3686659-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
net: ethtool: rss: add notifications
Next step on the path to moving RSS config to Netlink. With the
refactoring of the driver-facing API for ETHTOOL_GRXFH/ETHTOOL_SRXFH
out of the way we can move on to more interesting work.
Add Netlink notifications for changes in RSS configuration.
As a reminder (part) of rss-get was introduced in previous releases
when input-xfrm (symmetric hashing) was added. rss-set isn't
implemented, yet, but we can implement rss-ntf and hook it into
the changes done via the IOCTL path (same as other ethtool-nl
notifications do).
Most of the series is concerned with passing arguments to notifications.
So far none of the notifications needed to be parametrized, but RSS can
have multiple contexts per device, and since GET operates on a single
context at a time, the notification needs to also be scoped to a context.
Patches 2-5 add support for passing arguments to notifications thru
ethtool-nl generic infra.
The notification handling itself is pretty trivial, it's mostly
hooking in the right entries into the ethool-nl op tables.
v1: https://lore.kernel.org/20250621171944.2619249-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250623231720.3124717-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that changing the RSS config generates Netlink notifications.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..2
ok 1 rss_api.test_rxfh_indir_ntf
ok 2 rss_api.test_rxfh_indir_ctx_ntf
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250623231720.3124717-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ETHTOOL_GRXFHINDIR reimplementation has been completed around
a year ago. We have been tweaking it so a bit hard to point
to a single commit that completed it, but all the fields available
in IOCTL are reported via Netlink.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250623231720.3124717-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for RSS_SET handling in ethnl introduce Netlink
notifications for RSS. Only cover modifications, not creation
and not removal of a context, because the latter may deserve
a different notification type. We should cross that bridge
when we add the support for context add / remove via Netlink.
Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Copy information parsed for SET with .req_parse to NTF handling
and therefore the GET-equivalent that it ends up executing.
This way if the SET was on a sub-object (like RSS context)
the notification will also be appropriately scoped.
Also copy the phy_index, Maxime suggests this will help PLCA
commands generate accurate notifications as well.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool_notify() takes a const void *data argument, which presumably
was intended to pass information from the call site to the subcommand
handler. This argument currently has no users.
Expecting the data to be subcommand-specific has two complications.
Complication #1 is that its not plumbed thru any of the standardized
callbacks. It gets propagated to ethnl_default_notify() where it
remains unused. Coming from the ethnl_default_set_doit() side we pass
in NULL, because how could we have a command specific attribute in
a generic handler.
Complication #2 is that we expect the ethtool_notify() callers to
know what attribute type to pass in. Again, the data pointer is
untyped.
RSS will need to pass the context ID to the notifications.
I think it's a better design if the "subcommand" exports its own
typed interface and constructs the appropriate argument struct
(which will be req_info). Remove the unused data argument from
ethtool_notify() but retain it in a new internal helper which
subcommands can use to build a typed interface.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for using req_info to carry parameters between SET
and NTF - call .parse_request during ethnl_default_set_doit().
The main question here is whether .parse_request is intended to be
GET-specific. Originally the SET handling was delegated to each subcommand
directly - ethnl_default_set_doit() and .set callbacks in ethnl_request_ops
did not exist. Looking at existing users does not shed much light, all
of the following subcommands use .parse_request but have no SET handler
(and no NTF):
net/ethtool/eeprom.c
net/ethtool/rss.c
net/ethtool/stats.c
net/ethtool/strset.c
net/ethtool/tsinfo.c
There's only one which does have a SET:
net/ethtool/pause.c
where .parse_request handling is used to select which statistics to query.
Not relevant for SET but also harmless.
Going back to RSS (which doesn't have SET today) .parse_request parses
the rss_context ID. Using the req_info struct to pass the context ID
from SET to NTF will be very useful.
Switch to ethnl_default_parse(), effectively adding the .parse_request
for SET handlers.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for using req_info to carry parameters between
SET and NTF allocate a full request info struct. Since the size
depends on the subcommand we need to allocate it on the heap.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the multicast group's name to the YAML spec.
Without it YNL doesn't know how to subscribe to notifications.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250623231720.3124717-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syszbot reports various ordering issues for lower instance locks and
team lock. Switch to using rtnl lock for protecting team device,
similar to bonding. Based on the patch by Tetsuo Handa.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+705c61d60b091ef42c04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=705c61d60b091ef42c04
Reported-by: syzbot+71fd22ae4b81631e22fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71fd22ae4b81631e22fd
Fixes: 6b1d3c5f675c ("team: grab team lock during team_change_rx_flags")
Link: https://lkml.kernel.org/r/ZoZ2RH9BcahEB9Sb@nanopsycho.orion
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250623153147.3413631-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The below commit that updated BPF_MAP_TYPE_LRU_HASH free target,
also updated tools/testing/selftests/bpf/test_lru_map to match.
But that missed one case that passes with 4 cores, but fails at
higher cpu counts.
Update test_lru_sanity3 to also adjust its expectation of target_free.
This time tested with 1, 4, 16, 64 and 384 cpu count.
Fixes: d4adf1c9ee77 ("bpf: Adjust free target to avoid global starvation of LRU map")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If an error occurs after calling mux_state_select(), mux_state_deselect()
should be called as already done in the remove function.
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/998542981b6d2435c057dd8b9fe71743927babab.1749913149.git.christophe.jaillet@wanadoo.fr
|
|
Use adapater->name inplace of adapter->owner->name to fix
build issues when CONFIG_MODULES is not defined.
Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set"
Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name")
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
|
|
Initialize unique name for amdisp i2c adapter, which is used
in the platform driver to detect the matching adapter for
i2c_client creation.
Add definition of amdisp i2c adapter name in a new header file
(include/linux/soc/amd/isp4_misc.h) as it is referred in different
driver modules.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-3-pratap.nirujogi@amd.com
|
|
Check if the adapter name is already set in the driver prior to
initializing with generic name in i2c_dw_probe_master(). This
check allows to retain the unique adapter name driver has
initialized, which platform driver can use to distinguish it
from other i2c designware adapters.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-2-pratap.nirujogi@amd.com
|
|
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v2.6.22+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com
|
|
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com
|
|
Acknowledge the byte count submitted by the target.
When I2C_SMBUS_BLOCK_DATA read operation is executed by
i2c_smbus_xfer_emulated(), the length of the second (read) message is set
to 1. Length of the block is supposed to be obtained from the target by the
underlying bus driver.
The i2c_imx_isr_read() function should emit the acknowledge on i2c bus
after reading the first byte (i.e., byte count) while processing such
message (as defined in Section 6.5.7 of System Management Bus
Specification [1]). Without this acknowledge, the target does not submit
subsequent bytes and the controller only reads 0xff's.
In addition, store the length of block data obtained from the target in
the buffer provided by i2c_smbus_xfer_emulated() - otherwise the first
byte of actual data is erroneously interpreted as length of the data
block.
[1] https://smbus.org/specs/SMBus_3_3_20240512.pdf
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@leica-geosystems.com>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250520122252.1475403-1-lukasz.kucharczyk@leica-geosystems.com
|
|
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Fixes: 9d0a23313b1a ("libbpf: Add capability for resizing datasec maps")
Signed-off-by: Adin Scannell <amscanne@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
|
|
cxl_find_rec_dram() is used to find a DRAM event record based on the
inputted attributes. Different repair_type of the inputted attributes
will check the DRAM event record in different ways.
When EDAC driver is performing a memory rank sparing, it should use
CXL_RANK_SPARING rather than CXL_BANK_SPARING as repair_type for DRAM
event record checking.
Fixes: 588ca944c277 ("cxl/edac: Add CXL memory device memory sparing control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://patch.msgid.link/20250620052924.138892-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix for a runtime PM underflow when removing the Cadence QuadSPI
driver"
* tag 'spi-fix-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-quadspi: Fix pm runtime unbalance
|
|
The generate '[FAILED TO PARSE]' strings in trace-cmd report output like this:
rm-5298 [001] 6084.533748493: smb3_exit_err: [FAILED TO PARSE] xid=972 func_name=cifs_rmdir rc=-39
rm-5298 [001] 6084.533959234: smb3_enter: [FAILED TO PARSE] xid=973 func_name=cifs_closedir
rm-5298 [001] 6084.533967630: smb3_close_enter: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361
rm-5298 [001] 6084.534004008: smb3_cmd_enter: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566
rm-5298 [001] 6084.552248232: smb3_cmd_done: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566
rm-5298 [001] 6084.552280542: smb3_close_done: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361
rm-5298 [001] 6084.552316034: smb3_exit_done: [FAILED TO PARSE] xid=973 func_name=cifs_closedir
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers.
ufs and megaraid_sas are small and obvious.
The large diffstat in fnic comes from two pieces: the addition of
quite a bit of logging (no change to function) and the reworking of
the timeout allocation path for the two conditions that can occur
simultaneously to prevent reusing the same abort frame and then both
trying to free it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()
scsi: fnic: Set appropriate logging level for log message
scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths
scsi: fnic: Turn off FDMI ACTIVE flags on link down
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
scsi: ufs: core: Fix clk scaling to be conditional in reset and restore
scsi: megaraid_sas: Fix invalid node index
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
- fix FP registers in seccomp mode
- prevent duplicate devices in VFIO support
- don't ignore errors in UBD thread start
- reduce stack use with clang 19
* tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: Reduce stack usage in vector_eth_configure()
um: Use correct data source in fpregs_legacy_set()
um: vfio: Prevent duplicate device assignments
um: ubd: Add missing error check in start_io_thread()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
The usual features/cleanups/etc., notably:
- rtw88: IBSS mode for SDIO devices
- rtw89:
- BT coex for MLO/WiFi7
- work on station + P2P concurrency
- ath: fix W=2 export.h warnings
- ath12k: fix scan on multi-radio devices
- cfg80211/mac80211: MLO statistics
- mac80211: S1G aggregation
- cfg80211/mac80211: per-radio RTS threshold
* tag 'wireless-next-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (171 commits)
wifi: iwlwifi: dvm: fix potential overflow in rs_fill_link_cmd()
iwlwifi: Add missing check for alloc_ordered_workqueue
wifi: iwlwifi: Fix memory leak in iwl_mvm_init()
iwlwifi: api: delete repeated words
iwlwifi: remove unused no_sleep_autoadjust declaration
iwlwifi: Fix comment typo
iwlwifi: use DECLARE_BITMAP macro
iwlwifi: fw: simplify the iwl_fw_dbg_collect_trig()
wifi: iwlwifi: mld: ftm: fix switch end indentation
MAINTAINERS: update iwlwifi git link
wifi: iwlwifi: pcie: fix non-MSIX handshake register
wifi: iwlwifi: mld: don't exit EMLSR when we shouldn't
wifi: iwlwifi: move _iwl_trans_set_bits_mask utilities
wifi: iwlwifi: mld: make iwl_mld_add_all_rekeys void
wifi: iwlwifi: move iwl_trans_pcie_write_mem to iwl-trans.c
wifi: iwlwifi: pcie: move iwl_trans_pcie_dump_regs() to utils.c
wifi: iwlwifi: mld: advertise support for TTLM changes
wifi: iwlwifi: mld: Block EMLSR when scanning on P2P Device
wifi: iwlwifi: mld: use the correct struct size for tracing
wifi: iwlwifi: support RZL platform device ID
...
====================
Link: https://patch.msgid.link/20250625120135.41933-55-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Link: https://patch.msgid.link/20250625115433.41381-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bigger array of vecs could've been allocated, but
io_ring_buffers_peek() still decided to cap the mapped range depending
on how much data was available. Hence don't rely on the segment count
to know if the request should be marked as needing cleanup, always
check upfront if the iov array is different than the fast_iov array.
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
transmit all data
We should not send smbdirect_data_transfer messages larger than
the negotiated max_send_size, typically 1364 bytes, which means
24 bytes of the smbdirect_data_transfer header + 1340 payload bytes.
This happened when doing an SMB2 write with more than 1340 bytes
(which is done inline as it's below rdma_readwrite_threshold).
It means the peer resets the connection.
When testing between cifs.ko and ksmbd.ko something like this
is logged:
client:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: \\carina Send error in SessSetup = -11
smb2_reconnect: 12 callbacks suppressed
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: reconnect tcon failed rc = -11
CIFS: VFS: SMB: Zero rsize calculated, using minimum value 65536
and:
CIFS: VFS: RDMA transport re-established
siw: got TERMINATE. layer 1, type 2, code 2
CIFS: VFS: smbd_recv:1894 disconnected
siw: got TERMINATE. layer 1, type 2, code 2
The ksmbd dmesg is showing things like:
smb_direct: Recv error. status='local length error (1)' opcode=128
smb_direct: disconnected
smb_direct: Recv error. status='local length error (1)' opcode=128
ksmbd: smb_direct: disconnected
ksmbd: sock_read failed: -107
As smbd_post_send_iter() limits the transmitted number of bytes
we need loop over it in order to transmit the whole iter.
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Meetakshi Setiya <msetiya@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable+noautosel@kernel.org> # sp->max_send_size should be info->max_send_size in backports
Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b13" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
|
|
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
|
|
Replace the return statement with setting ret = -EINVAL and jumping to
the err label to ensure resources are released via io_release_dmabuf.
Fixes: a5c98e942457 ("io_uring/zcrx: dmabuf backed zerocopy receive")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250625102703.68336-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
