summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-06drm/i915/icl: Define PORT_CL_DW_10 registerMadhav Chauhan
This register used to power down individual lanes for DDI/DSI ports. Bitfields to power up/down various combinations of lanes are also added in this patch. v2: Review comments from Jani N - Use override instead of "override" for bitfields - Define mask for override bitfield - Define PWR_DOWN_LN* macros shifted in place v3: Correct PWR_DOWN_LN_MASK value (Jani N) Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-6-git-send-email-madhav.chauhan@intel.com
2018-07-06drm/i915/icl: Enable DSI IO powerMadhav Chauhan
This patch configures mode of operation for DSI and enable DDI IO power by configuring power well. v2: Use for_each_dsi_port() for power get (Jani N) Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-5-git-send-email-madhav.chauhan@intel.com
2018-07-06drm/i915/icl: Define DSI mode ctl registerMadhav Chauhan
This patch defines DSI IO mode control register and it's bits used while enabling IO power for DSI. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-4-git-send-email-madhav.chauhan@intel.com
2018-07-06drm/i915/icl: Program DSI Escape clock DividerMadhav Chauhan
Escape Clock is used for LP communication across the DSI Link. To achieve the constant frequency of the escape clock from the variable DPLL frequency output, a variable divider(M) is needed. This patch programs the same. v2: (Jani N) Don't end line with "(". Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1530798591-2077-3-git-send-email-madhav.chauhan@intel.com
2018-07-06drm/stm: ltdc: rework reset sequenceYannick Fertre
Reset must be properly assert before deassert. This is important if there is an early boot splash screen before the kernel start up. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1530271355-5608-1-git-send-email-yannick.fertre@st.com
2018-07-06drm/stm: ltdc: filter mode pixel clock vs pad constraintYannick Fertre
Filter the requested mode pixel clock frequency according to the pad maximum supported frequency. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1530271342-5532-1-git-send-email-yannick.fertre@st.com
2018-07-06drm: print plane state normalized zpos valueBenjamin Gaignard
When dumping plane state print normalized zpos value as done for the other plane state fields. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605135407.20214-2-benjamin.gaignard@linaro.org
2018-07-06drm/i915/dsi: update some of the platform based checksJani Nikula
Use the more customary order of latest platform first, and don't bother with an if in the last branch. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-3-jani.nikula@intel.com
2018-07-06drm/i915/dsi: use vlv and bxt prefixes for the global DSI functionsJani Nikula
Avoid confusion with the functions to be added for the new ICL or gen 11 DSI implementation by renaming the current DSI functions. While at it, permutate the words in the function names to make them all start with "vlv_dsi" or "vlv_dsi_pll" etc. Reduce the platform abstractions in the PLL file while at it, moving the checks to vlv_dsi.c instead, where we typically already have the necessary if ladders. Leave the static functions as-is for now; they could be renamed later if needed. No functional changes. v2: use "gen7" prefix. v3: use "vlv" and "bxt" prefixes, reduce the abstractions. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-2-jani.nikula@intel.com
2018-07-06drm/i915/dsi: rename the current DSI files based on first platformJani Nikula
Starting from ICL or gen 11 we have a new DSI block which requires completely different programming from the current implementation. Having them in the same file would be confusing. Rename the current DSI and DSI PLL implementation files as vlv_dsi.c and vlv_dsi_pll.c. No functional changes. v2: use "gen7" prefix. v3: use "vlv" prefix. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-1-jani.nikula@intel.com
2018-07-06drm/i915/selftests: Fail hangcheck testing if the GPU is wedgedChris Wilson
If the GPU is irrecoverably wedged on startup, it means that it failed on initialisation and we have already tried to reset it but failed. We can ignore all further testing, as it is already dead. Failing early, prevents us from slowly failing in our endeavours later and timing out. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705150214.28316-1-chris@chris-wilson.co.uk
2018-07-06Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld ↵Dave Airlie
into drm-next "mali-dp driver changes for drm-next, includes the driver implementation for writeback, improvements for power management handling in the driver and a debugfs entry for reporting possible internal errors. Please pull at your earliest convenience. Boris Brezillon is also interested in this pull as he is going to change slightly the parameter for the writeback connector's atomic_commit() and he needs to fix the mali-dp driver in his series." Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
2018-07-06Merge tag 'drm-misc-next-2018-07-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt) Cross-subsystem Changes: console/fbcon: Add support for deferred console takeover (Hans de Goede) Core Changes: dma-fence clean up, improvements and docs (Daniel Vetter) add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä) Driver Changes: pl111: add Nomadik LCDC variant (Linus Walleij) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704234641.GA3981@juma
2018-07-06Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next A patchset worked out together with Peter Zijlstra. Ingo is OK with taking it through the DRM tree: This is a small fallout from a work to allow batching WW mutex locks and unlocks. Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to "Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested here is to implement also the "Wound-Wait" algorithm as a per-WW-class choice, as it has advantages in some cases. See for example http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html Now Wound-Wait is a preemptive algorithm, and the preemption is implemented using a lazy scheme: If a wounded transaction is about to go to sleep on a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock prevention. Since with WW mutexes we also require the aborted transaction to sleep waiting to lock the WW mutex it was aborted on, this choice also provides a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first WW mutex lock after the transaction was wounded whether the WW mutex was contended or not, the transaction might frequently be restarted without a wait, which is far from optimal. Note also that with the lazy preemption scheme, contrary to Wait-Die there will be no rollbacks on lock contention of locks held by a transaction that has completed its locking sequence. The modeset locks are then changed from Wait-Die to Wound-Wait since the typical locking pattern of those locks very well matches the criterion for a substantial reduction in the number of rollbacks. For reservation objects, the benefit is more unclear at this point and they remain using Wait-Die. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180703105339.4461-1-thellstrom@vmware.com
2018-07-05drm/amd: Add sphinx documentation for amd_ip_funcsDarren Powell
Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: update documentation for amdgpu_drv.cSonny Jiang
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: add a check for display depth validityMikita Lipski
[why] HDMI 2.0 fails to validate 4K@60 timing with 10 bpc [how] Adding a helper function that would verify if the display depth assigned would pass a bandwidth validation. Drop the display depth by one level till calculated pixel clk is lower than maximum TMDS clk. Bugzilla: https://bugs.freedesktop.org/106959 Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: adding ycbcr420 pixel encoding for hdmiMikita Lipski
[why] HDMI EDID's VSDB contains spectial timings for specifically YCbCr 4:2:0 colour space. In those cases we need to verify if the mode provided is one of the special ones has to use YCbCr 4:2:0 pixel encoding for display info. [how] Verify if the mode is using specific ycbcr420 colour space with the help of DRM helper function and assign the mode to use ycbcr420 pixel encoding. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd: Remove errors from sphinx documentationDarren Powell
Eliminating the warnings produced by sphinx when processing the sphinx comments in amdgpu_device.c & amdgpu_mn.c Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display/dc/dce: Fix multiple potential integer overflowsGustavo A. R. Silva
Add suffix ULL to constant 5 and cast variables target_pix_clk_khz and feedback_divider to uint64_t in order to avoid multiple potential integer overflows and give the compiler complete information about the proper arithmetic to use. Notice that such constant and variables are used in contexts that expect expressions of type uint64_t (64 bits, unsigned). The current casts to uint64_t effectively apply to each expression as a whole, but they do not prevent them from being evaluated using 32-bit arithmetic instead of 64-bit arithmetic. Also, once the expressions are properly evaluated using 64-bit arithmentic, there is no need for the parentheses that enclose them. Addresses-Coverity-ID: 1460245 ("Unintentional integer overflow") Addresses-Coverity-ID: 1460286 ("Unintentional integer overflow") Addresses-Coverity-ID: 1460401 ("Unintentional integer overflow") Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: Use 2-factor allocator callsKees Cook
As already done treewide, switch from open-coded multiplication to 2-factor allocation helper. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05Revert "drm/amd/display: Fix indentation in dcn10 resource constructor"Harry Wentland
That change was a merge gone bad. This reverts commit cb1d7eacb58f7d1b7d0e57b26dc02d45eada4a3c. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: off by one in find_irq_source_info()Dan Carpenter
The ->info[] array has DAL_IRQ_SOURCES_NUMBER elements so this condition should be >= instead of > or we could read one element beyond the end of the array. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Remove the same struct define in powerplayRex Zhu
delete the same struct define in powerplay, share the struct with display. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: Fix copy error when set memory clocksRex Zhu
Set memory clocks same as soc clocks Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: Refine the implementation of dm_pp_get_funcs_rvRex Zhu
powerplay/dpm export all interfaces in struct amd_pm_funcs. so call common exported interfaces instead of powerplay inner interfaces Also not include header file hwmgr.h Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Export notify_smu_enable_pwe to displayRex Zhu
Display can notify smu to enable pwe after gpu suspend. It is used in case when display resumes from S3 and wants to start audio driver by enabling pwe Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm: drop drm_pcie_get_speed_cap_mask and drm_pcie_get_max_link_widthAlex Deucher
These functions duplicated functionality which was ultimately added to the pci core. All users of these functions have been ported to using the newly exposed pci functionality. These functions are no longer used, so drop them. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/radeon: use pcie functions for link widthAlex Deucher
This is the last user of drm_pcie_get_speed_cap_mask. Use the pci version so we can drop drm_pcie_get_speed_cap_mask. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: use pcie functions for link width and speedAlex Deucher
Use the newly exported pci functions to get the link width and speed rather than using the drm duplicated versions. Also query the GPU link caps directly rather than hardcoding them. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: update amd_pcie.h to include gen4 speedsAlex Deucher
Internal header used by the driver to specify pcie gen speeds of the asic and chipset. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05PCI: Export pcie_get_speed_cap and pcie_get_width_capAlex Deucher
So drivers can use them. This can be used to replace duplicate code in the drm subsystem. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: switch firmware path for SI partsAlex Deucher
Use separate firmware path for amdgpu to avoid conflicts with radeon on SI parts. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: switch firmware path for CIK parts (v2)Alex Deucher
Use separate firmware path for amdgpu to avoid conflicts with radeon on CIK parts. v2: squash in logic simplification (Alex) Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: fix user fence write race conditionNicolai Hähnle
The buffer object backing the user fence is reserved using the non-user fence, i.e., as soon as the non-user fence is signaled, the user fence buffer object can be moved or even destroyed. Therefore, emit the user fence first. Both fences have the same cache invalidation behavior, so this should have no user-visible effect. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Remove duplicate code in vega12_hwmgr.cRex Zhu
use smu_helper function smu_set_watermarks_for_clocks_ranges in vega12_set_watermarks_for_clocks_ranges. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Refine the interface exported to displayRex Zhu
use void * as function parameter type in order for extension. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: Notify powerplay the display controller idrex zhu
powerplay can recalculate the number of active display Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: Notify powerplay the min_dcef clockrex zhu
powerplay can notify smu to recalculates the maximum deep-sleep divider display allowed. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Switch the tolerable latency for displayrex zhu
Select the lowest MCLK frequency that is within the tolerable latency defined in DISPALY Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Memory Latency is always 25us on Vega10Rex Zhu
For HBM, 25us latency is enough for memory clock switch. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Convert clock unit to KHz as definedRex Zhu
Convert clock unit 10KHz to KHz as the data sturct defined. e.g. struct pp_clock_with_latency { uint32_t clocks_in_khz; uint32_t latency_in_us; }; Meanwhile revert the same conversion in display side. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: update uvd_v6_0_ring_vm_funcs to use new nop packetAlex Deucher
Was missed when updating the uvd 6 module. Fixes: 1aac3c9180 (drm/amdgpu: fix insert nop for UVD6 ring) Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-05drm/amdgpu: fix the wrong type of gem object creationHuang Rui
We still use legacy type of gem_object_create, it should update to ttm_bo_type now. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/radeon: add SPDX identifier and clarify licenseDirk Hohndel (VMware)
This is dual licensed under GPL-2.0 or MIT. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dirk Hohndel (VMware) <dirk@hohndel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd: add SPDX identifier and clarify licenseDirk Hohndel (VMware)
This is dual licensed under GPL-2.0 or MIT. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dirk Hohndel (VMware) <dirk@hohndel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd: Replace drm_dev_unref with drm_dev_putThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu/vce: simplify vce instance setupAlex Deucher
Set the me instance in early init and use that rather than calculating the instance based on the ring pointer. Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu/sdma: simplify sdma instance setupAlex Deucher
Set the me instance in early init and use that rather than calculating the instance based on the ring pointer. Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu/pp: fix copy paste typo in smu7_get_pp_table_entry_callback_func_v1Alex Deucher
Should be using PCIELaneLow for the low clock level. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 01:28:33 +0000