summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-03spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_opsAxel Lin
The .set_ramp_delay should be for bd70528_buck_ops only. Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f). So setting ramp_delay for LDOs may change the voltage output, fix it. Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03ASoC: Intel: boards: Fix compile-testing RT1011/RT5682Arnd Bergmann
On non-x86, the new driver results in a build failure: sound/soc/intel/boards/cml_rt1011_rt5682.c:14:10: fatal error: asm/cpu_device_id.h: No such file or directory The asm/cpu_device_id.h header is not actually needed here, so don't include it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200102135322.1841053-1-arnd@arndb.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-02Merge tag 'gcc-plugins-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fix from Kees Cook: "Build flexibility fix: allow builds to disable plugins even when plugins available (Arnd Bergmann)" * tag 'gcc-plugins-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again
2020-01-02Merge tag 'seccomp-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon. The bulk of this is fixing the surrounding samples and selftests so that seccomp can correctly validate the seccomp_notify_ioctl buffer as being initially zeroed. Summary: - Fix samples and selftests to zero passed-in buffer - Enforce zeroed buffer checking - Verify buffer sanity check in selftest" * tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV seccomp: Check that seccomp_notif is zeroed out by the user selftests/seccomp: Zero out seccomp_notif samples/seccomp: Zero out members based on seccomp_notif_sizes
2020-01-02MIPS: Avoid VDSO ABI breakage due to global register variablePaul Burton
Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f355e ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Brauner <christian.brauner@canonical.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> # v4.4+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-02Merge tag 'linux-can-fixes-for-5.5-20200102' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02Merge tag 'pstore-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore bug fixes from Kees Cook: - always reset circular buffer state when writing new dump (Aleksandr Yashkin) - fix rare error-path memory leak (Kees Cook) * tag 'pstore-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Write new dumps to start of recycled zones pstore/ram: Fix error-path memory leak in persistent_ram_new() callers
2020-01-02net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02vxlan: fix tos value before xmitHangbin Liu
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02sch_cake: avoid possible divide by zero in cake_enqueue()Wen Yang
The variables 'window_interval' is u64 and do_div() truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. The unit of window_interval is nanoseconds, so its lower 32-bit is relatively easy to exceed. Fix this issue by using div64_u64() instead. Fixes: 7298de9cd725 ("sch_cake: Add ingress mode") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: cake@lists.bufferbloat.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03drm/i915/gt: Flush ongoing retires during wait_for_idleChris Wilson
Synchronise with any background retires and parking we may have spawned, so that all requests are accounted for. Closes: https://gitlab.freedesktop.org/drm/intel/issues/878 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102231604.1669010-1-chris@chris-wilson.co.uk
2020-01-02drm/msm: use BUG_ON macro for debugging.Wambui Karuga
As the if statement only checks for the value of the offset_name variable, it can be replaced by the more conscise BUG_ON macro for error reporting. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/adreno: Do not print error on "qcom, gpu-pwrlevels" absenceFabio Estevam
Booting the adreno driver on a imx53 board leads to the following error message: adreno 30000000.gpu: [drm:adreno_gpu_init] *ERROR* Could not find the GPU powerlevels As the "qcom,gpu-pwrlevels" property is optional and never present on i.MX5, turn the message into debug level instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02Revert "fs: remove ksys_dup()"Dominik Brodowski
This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the subsequent fix for it in commit 2d3145f8d280 ("early init: fix error handling when opening /dev/console"). Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls caused more trouble than what is worth it: it requires accessing vfs internals and it turns out there were other bugs in it too. In particular, the file reference counting was wrong - because unlike the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and thus had an extra leaked file reference. That in turn then caused odd problems with Androidx86 long after boot becaue of how the extra reference to the console kept the session active even after all file descriptors had been closed. Reported-by: youling 257 <youling257@gmail.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-02drm/msm/dpu: Remove unneeded semicolon in dpu_encoder.czhengbin
Fixes coccicheck warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:2260:3-4: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unneeded semicolon in dpu_plane.czhengbin
Fixes coccicheck warning: drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:741:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/mdp5: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:905:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/hdmi: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/gpu/drm/msm/hdmi/hdmi_connector.c:104:3-4: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm: msm: mdp4: Adjust indentation in mdp4_dsi_encoder_enableNathan Chancellor
Clang warns: ../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:124:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] mdp4_crtc_set_config(encoder->crtc, ^ ../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:121:2: note: previous statement is here if (mdp4_dsi_encoder->enabled) ^ This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 776638e73a19 ("drm/msm/dsi: Add a mdp4 encoder for DSI") Link: https://github.com/ClangBuiltLinux/linux/issues/792 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
The dpu_encoder_phys * argument passed to these functions will never be NULL so don't check. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unreachable codeDrew Davenport
The return statement follows another return statement, so will never be reached. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unnecessary NULL checkDrew Davenport
dpu_encoder_virt.phys_encs[0:num_phys_encs-1] will not be NULL so don't check. Also fix multiline strings that caused checkpatch warning. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
dpu_crtc_mixer.hw_lm will never be NULL, so don't check. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
dpu_crtc_mixer.lm_ctl will never be NULL, so don't bother checking Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
dpu_hw_ctl* is checked for NULL when passed as an argument to several functions. It will never be NULL, so remove the checks. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02net: Correct type of tcp_syncookies sysctl.David S. Miller
It can take on the values of '0', '1', and '2' and thus is not a boolean. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02drm: msm: a6xx: Dump GBIF registers, debugbus in gpu stateSharat Masetty
Add the relevant GBIF registers and the debug bus to the a6xx gpu state. This comes in pretty handy when debugging GPU bus related issues. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm: msm: a6xx: Add support for A618Sharat Masetty
This patch adds support for enabling Graphics Bus Interface(GBIF) used in multiple A6xx series chipets. Also makes changes to the PDC/RSC sequencing specifically required for A618. This is needed for proper interfacing with RPMH. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm: msm: Add 618 gpu to the adreno gpu listSharat Masetty
This patch adds Adreno 618 entry and its associated properties to the gpulist entries. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02tracing: Initialize val to zero in parse_entry of inject codeSteven Rostedt (VMware)
gcc produces a variable may be uninitialized warning for "val" in parse_entry(). This is really a false positive, but the code is subtle enough to just initialize val to zero and it's not a fast path to worry about it. Marked for stable to remove the warning in the stable trees as well. Cc: stable@vger.kernel.org Fixes: 6c3edaf9fd6a3 ("tracing: Introduce trace event injection") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-02drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable()Stephan Gerhold
At the moment, the MSM DSI driver calls drm_panel_enable() rather early from the DSI bridge pre_enable() function. At this point, the encoder (e.g. MDP5) is not enabled, so we have not started transmitting video data. However, the drm_panel_funcs documentation states that enable() should be called on the panel *after* video data is being transmitted: The .prepare() function is typically called before the display controller starts to transmit video data. [...] After the display controller has started transmitting video data, it's safe to call the .enable() function. This will typically enable the backlight to make the image on screen visible. Calling drm_panel_enable() too early causes problems for some panels: The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016) uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control backlight/brightness of the screen. The enable sequence is therefore: drm_panel_enable() drm_panel_funcs.enable(): backlight_enable() backlight_ops.update_status(): mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command if it is sent too early. This prevents setting the initial brightness, causing the display to be enabled with minimum brightness instead. Adding various delays in the panel initialization code does not result in any difference. On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable() fixes the problem, indicating that the panel requires the video stream to be active before the brightness command is accepted. Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to delay calling it until video data is being transmitted. Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons. (This is not strictly required for the panel affected above...) Tested-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm:disp:dpu1: Fix core clk rate in display driverShubhashree Dhar
Fix max core clk rate during dt parsing in display driver. Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm:disp:dpu1: add scaler support on SC7180 displayShubhashree Dhar
Add scaler support for display driver. This patch has dependency on the below series https://patchwork.kernel.org/patch/11260267/ Co-developed-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm:disp:dpu1: add mixer selection for display topologyKalyan Thota
mixer selection in the display topology is based on multiple factors 1) mixers available in the hw 2) interfaces to be enabled 3) merge capability change will pickup mixer as per the topology need. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm:disp:dpu1: setup display datapath for SC7180 targetKalyan Thota
Add changes to setup display datapath on SC7180 target. Changes in v1: - Add changes to support ctl_active on SC7180 target. - While selecting the number of mixers in the topology consider the interface width. Changes in v2: - Spawn topology mixer selection into separate patch (Rob Clark). - Add co-developed-by tags in the commit msg (Stephen Boyd). Changes in v3: - Fix kernel checkpatch errors in v2. This patch has dependency on the below series https://patchwork.kernel.org/patch/11253747/ Co-developed-by: Shubhashree Dhar <dhar@codeaurora.org> Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> Co-developed-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm:disp:dpu1: add support for display for SC7180 targetKalyan Thota
Add display hw catalog changes for SC7180 target. Changes in v1: - Configure register offsets and capabilities for the display hw blocks. Changes in v2: - mdss_irq data type has changed in the dependent patch, accommodate the necessary changes. - Add co-developed-by tags in the commit msg (Stephen Boyd). Changes in v3: - fix kernel checkpatch errors in v2 Changes in v4: - move documentation into seperate patch (Rob Herring). This patch has dependency on the below series https://patchwork.kernel.org/patch/11253647/ Co-developed-by: Shubhashree Dhar <dhar@codeaurora.org> Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> Co-developed-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> [rebase on hw catalog const'ification, and add more const's] Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACKPengcheng Yang
When we receive a D-SACK, where the sequence number satisfies: undo_marker <= start_seq < end_seq <= prior_snd_una we consider this is a valid D-SACK and tcp_is_sackblock_valid() returns true, then this D-SACK is discarded as "old stuff", but the variable first_sack_index is not marked as negative in tcp_sacktag_write_queue(). If this D-SACK also carries a SACK that needs to be processed (for example, the previous SACK segment was lost), this SACK will be treated as a D-SACK in the following processing of tcp_sacktag_write_queue(), which will eventually lead to incorrect updates of undo_retrans and reordering. Fixes: fd6dad616d4f ("[TCP]: Earlier SACK block verification & simplify access to them") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02dt-bindings: msm:disp: add sc7180 DPU variantKalyan Thota
Add a compatible string to support sc7180 dpu version. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02msm: disp: dpu1: add support to access hw irqs regs depending on revisionShubhashree Dhar
Current code assumes that all the irqs registers offsets can be accessed in all the hw revisions; this is not the case for some targets that should not access some of the irq registers. This change adds the support to selectively remove the irqs that are not supported in some of the hw revisions. Changes in v1: - Add support to selectively remove the hw irqs that are not not supported. Changes in v2: - Remove unrelated changes. Changes in v3: - Remove change-id (Stephen Boyd). - Add colon in variable description to match kernel-doc (Stephen Boyd). - Change macro-y way of variable description (Jordon Crouse). - Remove unnecessary if checks (Jordon Crouse). - Remove extra blank line (Jordon Crouse). Changes in v4: - Remove checkpatch errors. Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Add UBWC support for RGB8888 formatsFritz Koenig
Hardware only natively supports BGR8888 UBWC. UBWC support for RGB8888 can be had by pretending that the buffer is BGR. Signed-off-by: Fritz Koenig <frkoenig@google.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/dpu: Mark various data tables as constStephen Boyd
These structures look like a bunch of data tables that aren't going to change after boot. Let's move them to the const RO section of memory so that they can't be modified at runtime on modern machines. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/a4xx: set interconnect bandwidth voteBrian Masney
Set the two interconnect paths for the GPU to maximum speed for now to work towards getting the GPU working upstream. We can revisit a later time to optimize this for battery life. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/a3xx: set interconnect bandwidth voteBrian Masney
Set the two interconnect paths for the GPU to maximum speed for now to work towards getting the GPU working upstream. We can revisit a later time to optimize this for battery life. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/gpu: add support for ocmem interconnect pathBrian Masney
Some A3xx and all A4xx Adreno GPUs do not have GMEM inside the GPU core and must use the On Chip MEMory (OCMEM) in order to be functional. There's a separate interconnect path that needs to be setup to OCMEM. Add support for this second path to the GPU core. In the downstream MSM 3.4 sources, the two interconnect paths for the GPU are between: - MSM_BUS_MASTER_GRAPHICS_3D and MSM_BUS_SLAVE_EBI_CH0 - MSM_BUS_MASTER_V_OCMEM_GFX3D and MSM_BUS_SLAVE_OCMEM Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02dt-bindings: drm/msm/gpu: document second interconnectBrian Masney
Some A3xx and all A4xx Adreno GPUs do not have GMEM inside the GPU core and must use the On Chip MEMory (OCMEM) in order to be functional. There's a separate interconnect path that needs to be setup to OCMEM. Let's document this second interconnect path that's available. Since there's now two available interconnects, let's add the interconnect-names property. Signed-off-by: Brian Masney <masneyb@onstation.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/adreno: fix zap vs no-zap handlingRob Clark
We can have two cases, when it comes to "zap" fw. Either the fw requires zap fw to take the GPU out of secure mode at boot, or it does not and we can write RBBM_SECVID_TRUST_CNTL directly. Previously we decided based on whether zap fw load succeeded, but this is not a great plan because: 1) we could have zap fw in the filesystem on a device where it is not required 2) we could have the inverse case Instead, shift to deciding based on whether we have a 'zap-shader' node in dt. In practice, there is only one device (currently) with upstream dt that does not use zap (cheza), and it already has a /delete-node/ for the zap-shader node. Fixes: abccb9fe3267 ("drm/msm/a6xx: Add zap shader load") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-02drm/msm/a6xx: restore previous freq on resumeRob Clark
Previously, if the freq were overriden (ie. via sysfs), it would get reset to max on resume. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
2020-01-02drm/msm/dpu: ignore NULL clocksRob Clark
This isn't an error. Also the clk APIs handle the NULL case, so we can just delete the check. Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 14:59:12 +0000