| Age | Commit message (Collapse) | Author |
|---|
|
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
I fixed it by making mrproper clean everything.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Same as on x86-64, strip the .comment, .note and debug sections from the
Linux kernel before creating the compressed image for the boot loader.
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.3-rc3
- make spd eeproms world-readable again
|
|
If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.
The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk
(cherry picked from commit 18398904ca9e3ddd180e2ecd45886e146b1d9d5b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk
(cherry picked from commit de5147b8ce6d51f634661d7c531385371485cec6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.
Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
(cherry picked from commit 092be382a2602067766f190a113514d469162456)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Instead of always calling xen_destroy_contiguous_region() in case the
memory is DMA-able for the used device, do so only in case it has been
made DMA-able via xen_create_contiguous_region() before.
This will avoid a lot of xen_destroy_contiguous_region() calls for
64-bit capable devices.
As the memory in question is owned by swiotlb-xen the PG_owner_priv_1
flag of the first allocated page can be used for remembering.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
range_straddles_page_boundary() is open coding several macros from
include/xen/page.h. Use those instead. Additionally there is no need
to have check_pages_physically_contiguous() as a separate function as
it is used only once, so merge it into range_straddles_page_boundary().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In user-space there's no way to distinguish why an mdb entry was deleted
and that is a problem for daemons which would like to keep the mdb in
sync with remote ends (e.g. mlag) but would also like to converge faster.
In almost all cases we'd like to age-out the remote entry for performance
and convergence reasons except when fast-leave is enabled. In that case we
want explicit immediate remote delete, thus add mdb flag which is set only
when the entry is being deleted due to fast-leave.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This variant of netif_napi_add() should be used from drivers
using NAPI to exclusively poll a TX queue.
Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.
Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
$
After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phy_led_trigger_change_speed()
In phy_led_trigger_change_speed(), there is an if statement on line 48
to check whether phy->last_triggered is NULL:
if (!phy->last_triggered)
When phy->last_triggered is NULL, it is used on line 52:
led_trigger_event(&phy->last_triggered->trigger, LED_OFF);
Thus, a possible null-pointer dereference may occur.
To fix this bug, led_trigger_event(&phy->last_triggered->trigger,
LED_OFF) is called when phy->last_triggered is not NULL.
This bug is found by a static analysis tool STCheck written by
the OSLAB group in Tsinghua University.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The -d command line argument to tdc requires the name of a physical device
on the system where the tests will be run. If -d has not been used, tdc
will skip tests that require a physical device.
This patch is intended to better document what the -d option does and how
it is used.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-07-29
This series includes updates to mlx5 driver,
1) Simplifications, cleanup and warning prints improvements
2) From Vlad Buslov:
Refactor mlx5 tc flow handling for unlocked execution (Part 1)
Currently, all cls API hardware offloads driver callbacks require caller
to hold rtnl lock when calling them. Cls API has already been updated to
update software filters in parallel (on classifiers that support
unlocked execution), however hardware offloads code still obtains rtnl
lock before calling driver tc callbacks. This set implements partial
support for unlocked execution that is leveraged by follow up
refactorings in specific mlx5 tc subsystems and patch to cls API that
implements API that allows drivers to register their callbacks as
rtnl-unlocked.
In mlx5 tc code mlx5e_tc_flow is the main structure that is used to
represent tc filter. Currently, code the structure itself and its
handlers in both tc and eswitch layers do not implement any kind of
synchronizations and assume external global synchronization provided by
rtnl lock instead. Implement following changes to remove dependency on
rtnl lock in flow handling code that are intended to be used a
groundwork for following changes to provide fully rtnl-independent mlx5
tc:
- Extend struct mlx5e_tc_flow with atomic reference counter and rcu to
allow concurrent access from multiple tc and neigh update workqueue
instances without introducing any additional locks specific to the
structure. Its 'flags' field type is changed to atomic bitmask ops which
is necessary for tc to interact with other concurrent tc instances or
concurrent neigh update that need to skip flows that are not fully
initialized (new INIT_DONE flow flag) and can change the flags
according to neighbor state (flipping OFFLOADED flag).
- Protect unready flows list by new uplink_priv->unready_flows_lock
mutex.
- Convert calls to netdev APIs that require rtnl lock in flow handling
code to their rcu counterparts.
- Modify eswitch code that is called from tc layer and assume implicit
external synchronization to be concurrency safe: change
esw->offloads.num_flows type to atomic integer and re-arrange
esw->state_lock usage to protect additional data.
Some of approaches to synchronizations presented in this patch set are
quite complicated (lockless concurrent usage of data structures with rcu
and reference counting, using fine-grained locking when necessary, retry
mechanisms to handle concurrent insertion of another instance of data
structure with same key, etc.). This is necessary to allow calling the
firmware in parallel in most cases, which is the main motivation of this
change since firmware calls are mach heavier operation than atomic
operations, multitude of locks and potential multiple retries during
concurrent accesses to same elements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Update driver version to 0.7.5
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
As a result of refactoring of VF VSIs interrupts code, there is no
need to track its configuration status again with ICE_VF_STATE_CFG_INTR
flag - In fact, it is not being checked anywhere in the code right now, so
this patch removes the dead code as applicable to the flag.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This flag is not needed and is called every time we re-enable interrupts
in the hotpath so remove it. Also remove ice_vsi_req_irq() because it
was a wrapper function for ice_vsi_req_irq_msix() whose sole purpose was
checking the ICE_FLAG_MSIX_ENA flag.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Since Tx rings are being managed by FW/NVM, Tx rings might have not been
set up or driver had already wiped them off - In that case, call to
disable LAN Tx queue is being returned as not in existence. This patch
makes sure we don't return unnecessary error for such scenario.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently if the call to ice_alloc_mapped_page() fails we jump to the
no_buf label, possibly call ice_release_rx_desc(), and return true
indicating that there is more work to do. In the success case we just
fall out of the while loop, possibly call ice_alloc_mapped_page(), and
return false saying we exhausted cleaned_count. This flow can be
improved by breaking if ice_alloc_mapped_page() fails and then the flow
outside of the while loop is the same for the failure and success case.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently we are not reporting dropped counts at the port level to
ethtool or netlink. This was found when debugging Rx dropped issues
and the total packets sent did not equal the total packets received
minus the rx_dropped, which was very confusing. To determine dropped
counts at the port level we need to read the PRTRPB_RDPC register.
To fix reporting we will store the dropped counts in the PF's
rx_discards. This will be reported to netlink by storing it in the
PF VSI's rx_missed_errors signaling that the receiver missed the
packet. Also, we will report this to ethtool in the rx_dropped.nic
field.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In case there is a request from a VF to change its number of queues, and
the request was successful, we need to update number of queues
configured on the VF before updating corresponding VSI for that VF,
especially LAN Tx queue tree and TC update, otherwise, we would continued
to use old value of vf->num_vf_qs for allocated Tx/Rx queues...
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch uses allocated number of Tx queues per VSI to set up its
scheduling tree instead of using total number of available Tx queues.
Only PF VSIs have total number of allocated Tx queues equal to number
of available Tx queues, other VSIs have different number of queues
configured.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently we bump the Rx tail and release/give buffers to hardware every
16 descriptors. This causes us to bump Rx tail up to 4 times per
napi_poll call. Also we are always bumping tail on an odd index and this
is a problem because hardware ignores the lower 3 bits in the QRX_TAIL
register. This is making it so hardware sees tail bumps only every 8
descriptors. Instead lets only bump Rx tail once per napi_poll if
the value aligns with hardware's expectations of the lower 3 bits being
cleared. Also only release/give Rx buffers once per napi_poll call.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
[subject was: drm/msm: shake fist angrily at dma-mapping]
So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops. The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).
Fixes this splat on mdp5 devices:
Unable to handle kernel paging request at virtual address ffffffff80000000
Mem abort info:
ESR = 0x96000144
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000144
CM = 1, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
[ffffffff80000000] pgd=0000000000000000
Internal error: Oops: 96000144 [#1] SMP
Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
Hardware name: Samsung Galaxy A5U (EUR) (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : __clean_dcache_area_poc+0x20/0x38
lr : arch_sync_dma_for_device+0x28/0x30
sp : ffff0000115736a0
x29: ffff0000115736a0 x28: 0000000000000001
x27: ffff800074830800 x26: ffff000011478000
x25: 0000000000000000 x24: 0000000000000001
x23: ffff000011478a98 x22: ffff800009fd1c10
x21: 0000000000000001 x20: ffff800075ad0a00
x19: 0000000000000000 x18: ffff0000112b2000
x17: 0000000000000000 x16: 0000000000000000
x15: 00000000fffffff0 x14: ffff000011455d70
x13: 0000000000000000 x12: 0000000000000028
x11: 0000000000000001 x10: ffff00001106c000
x9 : ffff7e0001d6b380 x8 : 0000000000001000
x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
x5 : 0000000000000000 x4 : 0000000000001000
x3 : 000000000000003f x2 : 0000000000000040
x1 : ffffffff80001000 x0 : ffffffff80000000
Call trace:
__clean_dcache_area_poc+0x20/0x38
dma_direct_sync_sg_for_device+0xb8/0xe8
get_pages+0x22c/0x250 [msm]
msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
...
Fixes the combination of two patches:
Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
|
|
Pull mount_capable() fix from Al Viro.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unbreak mount_capable()
|
|
Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.
This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.
Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To properly clear the slab on free with slab_want_init_on_free, we walk
the list of free objects using get_freepointer/set_freepointer.
The value we get from get_freepointer may not be valid. This isn't an
issue since an actual value will get written later but this means
there's a chance of triggering a bug if we use this value with
set_freepointer:
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] PREEMPT PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4
RIP: 0010:kfree+0x58a/0x5c0
Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4
RSP: 0000:ffffffff82603d90 EFLAGS: 00010002
RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000
RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320
RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100
R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300
FS: 0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0
Call Trace:
apply_wqattrs_prepare+0x154/0x280
apply_workqueue_attrs_locked+0x4e/0xe0
apply_workqueue_attrs+0x36/0x60
alloc_workqueue+0x25a/0x6d0
workqueue_init_early+0x246/0x348
start_kernel+0x3c7/0x7ec
x86_64_start_reservations+0x40/0x49
x86_64_start_kernel+0xda/0xe4
secondary_startup_64+0xb6/0xc0
Modules linked in:
---[ end trace f67eb9af4d8d492b ]---
Fix this by ensuring the value we set with set_freepointer is either NULL
or another value in the chain.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Align the RV64 defconfig to the output of "make savedefconfig" to
avoid unnecessary deltas for future defconfig patches. This patch
should have no runtime functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
On FU540-based systems, the "timebase-frequency" (RTCCLK) is sourced
from an external crystal located on the PCB. Thus the
timebase-frequency DT property should be defined by the board that
uses the SoC, not the SoC itself. Drop the superfluous
timebase-frequency property from the SoC DT data. (It's already
present in the board DT data.)
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
|
This patch fix following perf record error by linking vdso.so with
build id.
perf.data perf.data.old
[ perf record: Woken up 1 times to write data ]
free(): double free detected in tcache 2
Aborted
perf record use filename__read_build_id(util/symbol-minimal.c) to get
build id when libelf is not supported. When vdso.so is linked without
build id, the section size of PT_NOTE will be zero, buf size will
realloc to zero and cause memory corruption.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
drm_cflush_pages() is no-op on arm/arm64. But instead we can use
dma_sync API.
Fixes failures w/ vgem_test.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717211542.30482-1-robdclark@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor fixes:
- Fix trace event header include guards, as several did not match the
#define to the #ifdef
- Remove a redundant test to ftrace_graph_notrace_addr() that was
accidentally added"
* tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
fgraph: Remove redundant ftrace_graph_notrace_addr() test
tracing: Fix header include guards in trace event headers
|
|
This patch adds code to clear VFs enable status until reset is completed,
and Tx/Rx rings are setup. Without this patch, the code flow request Tx
queues to be disabled after reset, especially PFR - where VF VSI Tx rings
have already been wiped off in the NVM and result to adminq error based on
the call to disable Tx LAN queue in ice_reset_all_vfs function call.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The firmware reports an error when trying to configure a port with no
media. Instead of always configuring the port, check for media before
attempting to configure it. In the absence of media, turn off link and
poll for media to become available before re-enabling link.
Move ice_force_phys_link_state() up to avoid forward declaration.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and
destroy the locks used to protect the send and receive process of each
control queue.
This is problematic, as the driver may use these functions to shutdown
and re-initialize the control queues at run time. For example, it may do
this in response to a device reset.
If the driver failed to recover from a reset, it might leave the control
queues offline. In this case, the locks will no longer be initialized.
A later call to ice_sq_send_cmd will then attempt to acquire a lock that
has been destroyed.
It is incorrect behavior to access a lock that has been destroyed.
Indeed, ice_aq_send_cmd already tries to avoid accessing an offline
control queue, but the check occurs inside the lock.
The root of the problem is that the locks are destroyed at run time.
Modify ice_init_all_ctrlq and ice_shutdown_all_ctrlq such that they no
longer create or destroy the locks.
Introduce new functions, ice_create_all_ctrlq and ice_destroy_all_ctrlq.
Call these functions in ice_init_hw and ice_deinit_hw.
Now, the control queue locks will remain valid for the life of the
driver, and will not be destroyed until the driver unloads.
This also allows removing a duplicate check of the sq.count and
rq.count values when shutting down the controlqs. The ice_shutdown_ctrlq
function already checks this value under the lock. Previously
commit dec64ff10ed9 ("ice: use [sr]q.count when checking if queue is
initialized") needed this check to happen outside the lock, because it
prevented duplicate attempts at destroying the locks.
The driver may now safely use ice_init_all_ctrlq and
ice_shutdown_all_ctrlq while handling reset events, without causing the
locks to be invalid.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently we are always setting prefena to 0. This is causing the
hardware to only fetch descriptors when there are none free in the cache
for a received packet instead of prefetching when it has used the last
descriptor regardless of incoming packets. Fix this by allowing the
hardware to prefetch Rx descriptors.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When interrupt tracking was refactored, during rebuild, the call to
ice_vsi_setup_vector_base() was inadvertently removed from the PF VSI
instead of being removed from the VF VSI. During reset, the failure to
properly setup the vector base generates a call trace. Correct this so
that resets/rebuilds properly complete.
Fixes: cbe66bfee6a0 ("ice: Refactor interrupt tracking")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently, ice_stat_update32 and ice_stat_update40 will limit the
value of the software statistic to 32 or 40 bits wide, depending on
which register is being read.
This means that if a driver is running for a long time, the displayed
software register values will roll over to zero at 40 bits or 32 bits.
This occurs because the functions directly assign the difference between
the previous value and current value of the hardware statistic.
Instead, add this value to the current software statistic, and then
update the previous value.
In this way, each time ice_stat_update40 or ice_stat_update32 are
called, they will increment the software tracking value by the
difference of the hardware register from its last read. The software
tracking value will correctly count up until it overflows a u64.
The only requirement is that the ice_stat_update functions be called at
least once each time the hardware register overflows.
While we're fixing ice_stat_update40, modify it to use rd64 instead of
two calls to rd32. Additionally, drop the now unnecessary hireg
function parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add support for reporting link partner advertising when
ETHTOOL_GLINKSETTINGS defined. Get pause param reports the Tx/Rx
pause configured, and then ethtool issues ETHTOOL_GSET ioctl and
ice_get_settings_link_up reports the negotiated Tx/Rx pause. Negotiated
pause frame report per IEEE 802.3-2005 table 288-3.
$ ethtool --show-pause ens6f0
Pause parameters for ens6f0:
Autonegotiate: on
RX: on
TX: on
RX negotiated: on
TX negotiated: on
$ ethtool ens6f0
Settings for ens6f0:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseCR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: None BaseR RS
Advertised link modes: 25000baseCR/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: None BaseR RS
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 25000Mb/s
Duplex: Full
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
When ETHTOOL_GLINKSETTINGS is not defined, get pause param reports the
negotiated Tx/Rx pause.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
GCC throws out this warning on arm64.
drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]
Fix it by making free_screen_info() a static inline function.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull IPMI fix from Corey Minyard:
"One necessary fix for an uninitialized variable in the new IPMB driver.
Nothing else has come in besides things that need to wait until later"
* tag 'for-linus-5.3-2' of git://github.com/cminyard/linux-ipmi:
Fix uninitialized variable in ipmb_dev_int.c
|
|
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers")
Cc: <stable@vger.kernel.org> # 4.4.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Using an old .config in combination with "make oldconfig" can cause
an incorrect detection of the compat compiler:
$ grep CROSS_COMPILE_COMPAT .config
CONFIG_CROSS_COMPILE_COMPAT_VDSO=""
$ make oldconfig && make
arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT.
Stop.
Accordingly to the section 7.2 of the GNU Make manual "Syntax of
Conditionals", "When the value results from complex expansions of
variables and functions, expansions you would consider empty may
actually contain whitespace characters and thus are not seen as
empty. However, you can use the strip function to avoid interpreting
whitespace as a non-empty value."
Fix the issue adding strip to the CROSS_COMPILE_COMPAT string
evaluation.
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With the recent iomap write page reclaim deadlock fix, it turns out that the
GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this
happened as a side effect of always adding the inode buffer head to the current
transaction with gfs2_trans_add_meta, but this isn't happening consistently
anymore. Fix by removing an additional unnecessary gfs2_trans_add_meta call
and by setting the GLF_DIRTY flag in gfs2_iomap_end.
(The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when
syncing out the glock of that inode. When the flag isn't set, inode_go_sync
will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will
lead to cluster incoherency.)
In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the
inode as I_DIRTY_DATASYNC to have the inode added to the current transaction:
we don't expect metadata to change here, but let's err on the safe side.
Fixes: d0a22a4b03b8 ("gfs2: Fix iomap write page reclaim deadlock");
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In "consolidate the capability checks in sget_{fc,userns}())" the
wrong argument had been passed to mount_capable() by sget_fc().
That mistake had been further obscured later, when switching
mount_capable() to fs_context has moved the calculation of
bogus argument from sget_fc() to mount_capable() itself. It
should've been fc->user_ns all along.
Screwed-up-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Christian Brauner <christian@brauner.io>
Tested-by: Christian Brauner <christian@brauner.io>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
While do COMPILE_TEST build without CONFIG_NETDEVICES,
we get Kconfig warning:
WARNING: unmet direct dependencies detected for PHYLIB
Depends on [n]: NETDEVICES [=n]
Selected by [y]:
- OCTEON_ETHERNET [=y] && STAGING [=y] && (CAVIUM_OCTEON_SOC && NETDEVICES [=n] || COMPILE_TEST [=y])
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Mark Brown <broonie@kernel.org>
Fixes: 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
