| Age | Commit message (Collapse) | Author |
|---|
|
The OOBE experience fades the keyboard backlight in & out continuously,
and make the backlight uncontrollable using its device.
Workaround taken from
https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The added lvds driver and a change in the dsi driver resulted in failed
builds when COMMON_CLK is disabled:
x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove':
dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove':
lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider'
x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config':
lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe':
lvds.c:(.text+0x1476): undefined reference to `clk_hw_register'
x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get'
x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider'
x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister'
Add this as a dependency for the stm driver itself, since it will be
required in practice anyway.
Fixes: 185f99b61442 ("drm/stm: dsi: expose DSI PHY internal clock")
Fixes: aca1cbc1c986 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.org
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
(cherry picked from commit 26dbffb2a4c4d4639c7b336f6b74a437c23dadd4)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
sync_hw_clock() is normally called every 11 minutes when time is
synchronized. This issue is that this periodic timer uses the REALTIME
clock, so when time moves backwards (the NTP server jumps into the past),
the timer expires late.
If the timer expires late, which can be days later, the RTC will no longer
be updated, which is an issue if the device is abruptly powered OFF during
this period. When the device will restart (when powered ON), it will have
the date prior to the ADJ_SETOFFSET call.
A normal NTP server should not jump in the past like that, but it is
possible... Another way of reproducing this issue is to use phc2sys to
synchronize the REALTIME clock with, for example, an IRIG timecode with
the source always starting at the same date (not synchronized).
Also, if the time jump in the future by less than 11 minutes, the RTC may
not be updated immediately (minor issue). Consider the following scenario:
- Time is synchronized, and sync_hw_clock() was just called (the timer
expires in 11 minutes).
- A time jump is realized in the future by a couple of minutes.
- The time is synchronized again.
- Users may expect that RTC to be updated as soon as possible, and not
after 11 minutes (for the same reason, if a power loss occurs in this
period).
Cancel periodic timer on any time jump (ADJ_SETOFFSET) greater than or
equal to 1s. The timer will be relaunched at the end of do_adjtimex() if
NTP is still considered synced. Otherwise the timer will be relaunched
later when NTP is synced. This way, when the time is synchronized again,
the RTC is updated after less than 2 seconds.
Signed-off-by: Benjamin ROBIN <dev@benjarobin.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240908140836.203911-1-dev@benjarobin.fr
|
|
To update with the latest fixes.
|
|
Switch from rdev_get_drvdata() to container_of(), so the static
'struct max77650_regulator_desc' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-17-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch from rdev_get_drvdata() to container_of(), so the static
'struct hi6421v530_regulator_info' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-16-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hi6421v530_regulator_info.eco_microamp is assigned once and never
used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-15-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-14-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
pfuze_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-13-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
pcap_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-12-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-11-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-10-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The max77826_regulator_info.rdesc is assigned once and never used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-9-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
tps_driver_data), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-8-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
hi6421_spmi_reg_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-7-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
hi6421_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-6-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
da9121_range), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-4-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with device variant description
(struct da9063_dev_model), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-3-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulators description (struct
da9055_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-2-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulators description (struct
da9052_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-1-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
spi_controller_is_slave() and spi_slave_abort() are all replaced,
so they can be removed.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-8-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240910022618.1397-7-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name target_abort.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-6-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-5-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-4-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-3-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_controller_is_target().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-2-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixed some confusing typographical errors:
comptabile->compatible,
asignment->assignment,
Verison->Version,
meansurement->measurement,
offets->offsets.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240910064631.3223441-1-yujiaoliang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[ 4] Sent 20 datagrams
iperf3: error - the server has terminated
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested. Include header
for dev_dbg() declaration while at it.
Output before:
[ +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3
Output after:
[ +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
init() was removed from ramgp102 when reworking the memory detection, as
it was thought that the code was only necessary when the driver performs
mclk changes, which nouveau doesn't support on pascal.
However, it turns out that we still need to execute this on some GPUs to
restore settings after DEVINIT, so revert to the original behaviour.
v2: fix tags in commit message, cc stable
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/319
Fixes: 2c0c15a22fa0 ("drm/nouveau/fb/gp102-ga100: switch to simpler vram size detection method")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904232418.8590-1-bskeggs@nvidia.com
|
|
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 48b6190a0042 ("net/smc: Limit SMC visits when handshake workqueue congested"),
we introduce a mechanism to put constraint on SMC connections visit
according to the pressure of SMC handshake process.
At that time, we believed that controlling the feature through netlink
was sufficient. However, most people have realized now that netlink is
not convenient in container scenarios, and sysctl is a more suitable
approach.
In addition, since commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
had introcuded smc_sysctl_net_init(), it is reasonable for us to
initialize limit_smc_hs in it instead of initializing it in
smc_pnet_net_int().
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Link: https://patch.msgid.link/1725590135-5631-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Daniel Machon says:
====================
net: lan966x: use the newly introduced FDMA library
This patch series is the second of a 2-part series [1], that adds a new
common FDMA library for Microchip switch chips Sparx5 and lan966x. These
chips share the same FDMA engine, and as such will benefit from a common
library with a common implementation. This also has the benefit of
removing a lot of open-coded bookkeeping and duplicate code for the two
drivers.
In this second series, the FDMA library will be taken into use by the
lan966x switch driver.
###################
# Example of use: #
###################
- Initialize the rx and tx fdma structs with values for: number of
DCB's, number of DB's, channel ID, DB size (data buffer size), and
total size of the requested memory. Also provide two callbacks:
nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr.
- Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent().
- Initialize the DCB's with fdma_dcb_init().
- Add new DCB's with fdma_dcb_add().
- Free memory with fdma_free_phys() or fdma_free_coherent().
#####################
# Patch breakdown: #
#####################
Patch #1: select FDMA library for lan966x.
Patch #2: includes the fdma_api.h header and removes old symbols.
Patch #3: replaces old rx and tx variables with equivalent ones from the
fdma struct. Only the variables that can be changed without
breaking traffic is changed in this patch.
Patch #4: uses the library for allocation of rx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #5: uses the library for adding DCB's in the rx path.
Patch #6: uses the library for freeing rx buffers.
Patch #7: uses the library for allocation of tx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #8: uses the library for adding DCB's in the tx path.
Patch #9: uses the library helpers in the tx path.
Patch #10: ditch last_in_use variable and use library instead.
Patch #11: uses library helpers throughout.
Patch #12: refactor lan966x_fdma_reload() function.
[1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that we store everything in the fdma structs, refactor
lan966x_fdma_reload() to store and restore the entire struct.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library provides helpers for a number of DCB and DB operations. Use
these throughout the code and remove the old ones.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This variable is used in the tx path to determine the last used DCB. The
library has the variable last_dcb for the exact same purpose. Ditch the
last_in_use variable throughout.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->dcbs and tx->curr_entry
with the equivalents from the FDMA struct.
- add lan966x_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and the functions
for adding DCB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcbs and rx->last_entry
with the equivalents from the FDMA struct.
- make use of fdma->db_size for rx buffer size.
- add lan966x_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Include and use the new FDMA header, which now provides the required
masks and bit offsets for operating on the DCB's and DB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Select the newly introduced FDMA library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into
Merge thermal drivers changes for v6.12-rc1 from Daniel Lezcano:
"- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify with dev_err_probe() the error code path in the probe
functions for the brcmstb driver (Yan Zhen)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p with the tsens
driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations in the header file as the functions were
removed in a previous change on the ti-soc-thermal driver (Zhang
Zekun)
- Simplify with dev_err_probe() the error code path in the probe
functions for the imx_sc_thermal driver (Alexander Stein)"
* tag 'thermal-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
|
|
Get rid of redundant variables (nblocks, offset) and a dead branch
(!tailendpacking).
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240905030339.1474396-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Refactor out the iop binding behavior out of the erofs_fill_symlink
and move erofs_buf into the erofs_read_inode, so that erofs_fill_inode
can only deal with inode operation bindings and can be decoupled from
metabuf operations. This results in better calling conventions.
Note that after this patch, we do not need erofs_buf and ofs as
parameters any more when calling erofs_read_inode as
all the data operations are now included in itself.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20240425222847.GN2118490@ZenIV/
Signed-off-by: Yiyang Wu <toolmanp@tlmp.cc>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240902093412.509083-1-toolmanp@tlmp.cc
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
