summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-11HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd PortfolioVishnu Sankar
This applies similar quirks used by previous generation device, so that Trackpoint and buttons on the touchpad works. New USB KBD PID 0x61AE for Thinkpad X12 Tab is added. Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-09-11platform/x86: intel/pmc: Ignore all LTRs during suspendXi Pardee
Add support to ignore all LTRs before suspend and restore the previous LTR values after suspend. This feature could be turned off with module parameter ltr_ignore_all_suspend. LTR value is a mechanism for a device to indicate tolerance to access the corresponding resource. When system suspends, the resource is not available and therefore the LTR value could be ignored. Ignoring all LTR values prevents problematic device from blocking the system to get to the deepest package state during suspend. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Xi Pardee <xi.pardee@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240906184016.268153-1-xi.pardee@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-11RDMA/mlx5: Add implicit MR handling to ODP memory schemeMichael Guralnik
Implicit MRs in ODP memory scheme require allocating a private null mkey and assigning the mkey and va differently in the KSM mkey. The page faults are received on the null mkey so we also add storing the null mkey in the odp_mkey xarray. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-8-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11RDMA/mlx5: Add handling for memory scheme page fault eventsMichael Guralnik
The memory scheme page fault event is a new approch in handling page fault on mkeys using the on-demand-paging feature. The major shift in handling the page fault in this scheme is that the HW is taking responsibilty for parsing the faulted mkey instead of the previous approach where the driver would read and parse the wqes and query the mkeys to get to the direct mkey that we need to handle. Therefore, the event we get from FW in this scheme will contain the direct mkey and address we need to handle and require much less work from driver. Additionally, to optimize performance, the FW can generate the event on a memory area that is larger than the faulted memory operation is requiring, to 'prefetch' memory that is around it and will likely be used soon. Unlike previous types of page fault, the memory page scheme fault does not always require a resume command after handling the page fault as the FW can post multiple events on same mkey and will set the 'last' flag only on the page fault that requires the resume command. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-7-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11RDMA/mlx5: Split ODP mkey search logicMichael Guralnik
Split the search for the ODP mkey when handling an rdma type page fault to a helper function, later to be used in other page fault types. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-6-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11RDMA/mlx5: Enforce umem boundaries for explicit ODP page faultsMichael Guralnik
The new memory scheme page faults are requesting the driver to fetch additinal pages to the faulted memory access. This is done in order to prefetch pages before and after the area that got the page fault, assuming this will reduce the total amount of page faults. The driver should ensure it handles only the pages that are within the umem range. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-5-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11RDMA/mlx5: Add new ODP memory scheme eqe formatMichael Guralnik
Add new fields to support the new memory scheme page fault and extend the token field to u64 as in the new scheme the token is 48 bit. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-4-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11net/mlx5: Expose HW bits for Memory scheme ODPMichael Guralnik
Expose IFC bits to support the new memory scheme on demand paging. Change the macro reading odp capabilities to be able to read from the new IFC layout and align the code in upper layers to be compiled. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-3-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11net/mlx5: Expand mkey page size to support 6 bitsMichael Guralnik
Protect the usage of the 6th bit with the relevant capability to ensure we are using the new page sizes with FW that supports the bit extension. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/20240909100504.29797-2-michaelgur@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-11ASoC: amd: acp: remove MODULE_ALIAS for sof based generic machine driverVijendar Mukunda
As module device table added for AMD sof based generic machine driver, MODULE_ALIAS is not required. Remove MODULE_ALIAS for AMD sof based generic machine driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20240911093554.2076872-2-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11ASoC: amd: acp: remove MODULE_ALIAS for legacy machine driverVijendar Mukunda
As module device table added for AMD legacy machine driver, MODULE_ALIAS is not required. Remove MODULE_ALIAS for AMD legacy machine driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20240911093554.2076872-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11i2c: designware: Use pci_get_drvdata()Andy Shevchenko
Use the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-11i2c: designware: Propagate firmware nodeAndy Shevchenko
Propagate firmware node by using a specific API call, i.e. device_set_node(). Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-11i2c: designware: Uninline i2c_dw_probe()Andy Shevchenko
Since i2c_dw_probe() is going to be extended, uninline it to reduce the noise in the common header. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-11regulator: Few constifications of static dataMark Brown
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Few cleanups (safer code), built tested. Last two patches should probably be tested.
2024-09-11Merge branch 'lan743x-phylink'David S. Miller
Raju Lakkaraju says: ==================== Add support to PHYLINK for LAN743x/PCI11x1x chips This is the follow-up patch series of https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html Divide the PHYLINK adaptation and SFP modifications into two separate patch series. The current patch series focuses on transitioning the LAN743x driver's PHY support from phylib to phylink. Tested on PCI11010 Rev-1 Evaluation board Change List: ============ V5 -> V6: - Remove the lan743x_find_max_speed( ) function. Not require - Add EEE enable check before calling lan743x_mac_eee_enable( ) function V4 -> V5: - Remove the fixed_phy_unregister( ) function. Not require - Remove the "phydev->eee_enabled" check to update the MAC EEE enable/disable - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer. - Add phy_support_eee() to initialize the EEE flags V3 -> V4: - Add fixed-link patch along with this series. Note: Note: This code was developed by Mr.Russell King Ref: https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815 - Change phylink fixed-link function header's string from "Returns" to "Returns:" - Remove the EEE private variable from LAN743x adapter strcture and fix the EEE's set/get functions - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and __RGMII_TXID) replace with phy_interface_set_rgmii( ) function - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( ) V2 -> V3: - Remove the unwanted parens in each of these if() sub-blocks - Replace "to_net_dev(config->dev)" with "netdev". - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces - Fix the lan743x_phy_handle_exists( ) return type V1 -> V2: - Fix the Russell King's comments i.e. remove the speed, duplex update in lan743x_phylink_mac_config( ) - pre-March 2020 legacy support has been removed V0 -> V1: - Integrate with Synopsys DesignWare XPCS drivers - Based on external review comments, - Changes made to SGMII interface support only 1G/100M/10M bps speed - Changes made to 2500Base-X interface support only 2.5Gbps speed - Add check for not is_sgmii_en with is_sfp_support_en support - Change the "pci11x1x_strap_get_status" function return type from void to int - Add ethtool phylink wol, eee, pause get/set functions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Add support to ethtool phylink get and set settingsRaju Lakkaraju
Add support to ethtool phylink functions: - get/set settings like speed, duplex etc - get/set the wake-on-lan (WOL) - get/set the energy-efficient ethernet (EEE) - get/set the pause Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Migrate phylib to phylinkRaju Lakkaraju
Migrate phy support from phylib to phylink. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate Link Speed Duplex state functionRaju Lakkaraju
Create separate Link Speed Duplex (LSD) update state function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate PCS power reset functionRaju Lakkaraju
Create separate PCS power reset function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: phylink: Add phylink_set_fixed_link() to configure fixed link state in ↵Russell King
phylink The function allows for the configuration of a fixed link state for a given phylink instance. This addition is particularly useful for network devices that operate with a fixed link configuration, where the link parameters do not change dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up the fixed link state during initialization or configuration changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11Merge tag 'memory-controller-drv-6.12-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.12, part two 1. Renesas RPC-IF: adjust default setting for pins to accommodate different flash devices, which should fix 4-bit flash writes with Renesas AT25QL128A flash. 2. Simplify a bit probe() in PL172 and PL353-SMC. * tag 'memory-controller-drv-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: pl353-smc: simplify with scoped for each OF child loop memory: pl172: simplify releasing AMBA regions with devm memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins Link: https://lore.kernel.org/r/20240906140859.71712-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11sched/cpufreq: Use NSEC_PER_MSEC for deadline taskChristian Loehle
Convert the sugov deadline task attributes to use the available definitions to make them more readable. No functional change. Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240813144348.1180344-5-christian.loehle@arm.com
2024-09-11cpufreq/cppc: Use NSEC_PER_MSEC for deadline taskChristian Loehle
Convert the cppc deadline task attributes to use the available definitions to make them more readable. No functional change. Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240813144348.1180344-4-christian.loehle@arm.com
2024-09-11sched/deadline: Clarify nanoseconds in uapiChristian Loehle
Specify the time values of the deadline parameters of deadline, runtime, and period as being in nanoseconds explicitly as they always have been. Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240813144348.1180344-3-christian.loehle@arm.com
2024-09-11sched/deadline: Convert schedtool example to chrtChristian Loehle
chrt has SCHED_DEADLINE support so convert the example instead of relying on a schedtool fork. While at it fix the wrong mentioning of microseconds, it was nanoseconds for both schedtool and chrt. Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20240813144348.1180344-2-christian.loehle@arm.com
2024-09-11Merge tag 'v6.11-next-defconfig' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig mt8365: - Enable audio handled by the SoC and the PMIC codec. * tag 'v6.11-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm64: defconfig: enable mt8365 sound Link: https://lore.kernel.org/r/ea168bd6-b54b-47d3-ba5d-e545a9b406c1@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'riscv-config-for-v6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/defconfig RISC-V config for v6.12 Two patches, enabling clock and pinctrl support in defconfig for Sopghgo devices. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-config-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: defconfig: Enable pinctrl support for CV18XX Series SoC riscv: defconfig: sophgo: enable clks for sg2042 Link: https://lore.kernel.org/r/20240910-annex-ravage-07d63041a7c5@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'arm-soc/for-6.12/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into soc/drivers This pull request contains Broadcom SoC driver updates for 6.12, please pull the following: - Stefan improves the timeout warning within the Raspberry Pi firmware driver * tag 'arm-soc/for-6.12/drivers' of https://github.com/Broadcom/stblinux: firmware: raspberrypi: Improve timeout warning Link: https://lore.kernel.org/r/20240906180643.2275460-3-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge patch series "can: rockchip_canfd: rework delay calculation and ↵Marc Kleine-Budde
decoding of error code register" Marc Kleine-Budde <mkl@pengutronix.de> says: This series updates the delay calculation for the timekeeping delayed work and fixes the decoding of the error code register. Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-0-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of ↵Marc Kleine-Budde
error code register Probably due to a copy/paste error rkcanfd_handle_error_int_reg_ec() checks twice if the RKCANFD_REG_ERROR_CODE_TX_ACK_EOF bit is set in reg_ec. Keep the correct check for RKCANFD_REG_ERROR_CODE_TX_ACK_EOF and remove the superfluous one. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://patch.msgid.link/9a46d10d-e4e3-40a5-8fb6-f4637959f124@stanley.mountain Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-2-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculationArnd Bergmann
Rework the delay calculation to only require a single 64-bit division. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [mkl: port to on-top of existing 32-bit division fix] Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-1-5ce385b5ab10@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11Merge tag 'v6.12-rockchip-drivers-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers One new pmu compatible for rk3576 * tag 'v6.12-rockchip-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml Link: https://lore.kernel.org/r/3004026.A7TYtsqqnE@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.11-next-soc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers pmic warpper: - reduce size by constifying data structures - use devm_clk_bulk_det_all_enable mutex: - reduce size by changing variable bit size * tag 'v6.11-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: soc: mediatek: mtk-mutex: Reduce type size for mtk_mutex_data members soc: mediatek: pwrap: Use devm_clk_bulk_get_all_enable() soc: mediatek: pwrap: Constify some struct int[] soc: mediatek: pwrap: Constify struct pmic_wrapper_type Link: https://lore.kernel.org/r/bfa9ab87-9de8-41fc-bfd1-de5ec324cfe0@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()Arnd Bergmann
These two functions have a stub definition when CONFIG_IMX_SCMI_MISC_EXT is not set, which conflict with the global definition: In file included from drivers/firmware/imx/sm-misc.c:6: include/linux/firmware/imx/sm.h:30:1: error: expected identifier or '(' before '{' token 30 | { | ^ drivers/firmware/imx/sm-misc.c:26:5: error: redefinition of 'scmi_imx_misc_ctrl_get' 26 | int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val) | ^~~~~~~~~~~~~~~~~~~~~~ include/linux/firmware/imx/sm.h:24:19: note: previous definition of 'scmi_imx_misc_ctrl_get' with type 'int(u32, u32 *, u32 *)' {aka 'int(unsigned int, unsigned int *, unsigned int *)'} 24 | static inline int scmi_imx_misc_ctrl_get(u32 id, u32 *num, u32 *val) | ^~~~~~~~~~~~~~~~~~~~~~ There is no real need for the #ifdef, and removing this avoids the build failure. Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver") Link: https://lore.kernel.org/r/20240909203023.1275232-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'riscv-soc-fixes-for-v6.11-final' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v6.11-final StarFive: A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz Link: https://lore.kernel.org/r/20240909-hybrid-groovy-601a33b5b309@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pioKryštof Černý
Pin controllers pio and r_pio will have proper regulators assigned. Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240905-nanopi-neo-plus2-regfix-v3-2-1895dff59598@gmail.com [wens@csie.org: Make "h5" lowercase to match most commits] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-09-11platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependencyArnd Bergmann
There is still a build failure when the rwrng support is in a loadable module but the mcu driver is built-in: arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng': turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register' Change the dependency to explicitly disallow the broken configuration. Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG") Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11can: m_can: m_can_chip_config(): mask timestamp wraparound IRQJake Hamby
On the Microchip SAMA7G54 MPU the IR_TSW (timestamp wraparound) fires at about 1 Hz, but the driver doesn't care about it. Add it to the list of interrupts to disable in m_can_chip_config to reduce unneeded wakeups. Link: https://patch.msgid.link/DM8PR14MB5221D9DD3A7F2130EF161AF7EF9E2@DM8PR14MB5221.namprd14.prod.outlook.com Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com> Link: https://patch.msgid.link/20240911-can-m_can-mask-timestamp-wraparound-irq-v1-1-0155b70dc827@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11Merge tag 'arm-soc/for-6.12/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64 SoCs Device Tree changes for 6.12, please pull the following: - Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712) - Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to conform to the binding changes * tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837/bcm2712: adjust local intc node names arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11can: usb: Kconfig: Fix list of devices for esd_usb driverStefan Mätje
The CAN-USB/3-FD was missing on the list of supported devices. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://patch.msgid.link/20240910170236.2287637-1-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-11Merge tag 'v6.11-next-dts64' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt mt63xx: - add ADC node to the different PMICs mt7981: - Add SPI controller nodes. mt8183: - use referenced label for DSI endpoint. - disable soc_data efuse node, which does not has any cell definde (kukui). - fix the regulator tree (kukui). - fix potential deadlock by removing not needed clock in the MFG async power domain. - add DPI node. mt8186: - fix opp-supported-hw mask for GPU. - add lvts thermal sensor node. - add thermal zones. - fix reserved memory region of ADSP firmware (corsola). - add power domain to DPI node. - add SVS node. - fix internal display by disabling the external display temporarily (corsola). mt8188: - add thermal sensor for the AP. - add thermal zones. mt8195: - fix pull resistance for hdmi pins (cherry). - remove keyboard backlight node (cherry), this is detected through ChromeOS EC communication. - fix warning in mdp3 driver by providing a phandel to the SCP. - fix probe error of the USB controller by disabeling USB3 on the controller (cherry). - assign per default both phys to the USB controller (cherry). - fix binding validation by re-ordering the dp_intf clocks. mt8365: - add AFE audio controller. - add AFE and audio codec support (evk). mt8395: - fix probe error of the USB controller by disabeling USB3 on the controller (radax-nio-12l). - assign per default both phys to the USB controller (genio, kontron, radax). * tag 'v6.11-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (25 commits) arm64: dts: mediatek: add audio support for mt8365-evk arm64: dts: mediatek: add afe support for mt8365 SoC arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface arm64: dts: mediatek: mt8186: Add svs node arm64: dts: mediatek: mt8186: Add power domain for DPI arm64: dts: mediatek: mt8195: Correct clock order for dp_intf* arm64: dts: mt8183: add dpi node to mt8183 arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain arm64: dts: mt8183-kukui: clean up regulator tree arm64: dts: mediatek: mt7981: add SPI controllers arm64: dts: mediatek: mt8183-kukui: Disable unused efuse at 8000000 arm64: dts: mediatek: mt8188: add default thermal zones arm64: dts: mediatek: mt8188: add lvts definitions arm64: dts: mediatek: mt8186: add default thermal zones arm64: dts: mediatek: mt8186: add lvts definitions arm64: dts: mediatek: mt8195: Assign USB 3.0 PHY to xhci1 by default arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled arm64: dts: mediatek: mt8195: Add SCP phandle to MDP3 DMA controller ... Link: https://lore.kernel.org/r/059656ad-5365-4097-86a1-f4ba43edf5da@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'aspeed-6.12-devicetree' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.12 - New machines * IBM P11 AST2600 BMC machines, named Blueridge and Fuji * Meta's Catalina AST2600 BMC - Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3 - Various changes to the dtsi to keep the YAML checker happy * tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits) ARM: dts: aspeed: catalina: Update io expander line names ARM: dts: aspeed: catalina: Add pdb cpld io expander ARM: dts: aspeed: harma: Remove pca9546 ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings ARM: dts: aspeed: harma: Enable mctp controller ARM: dts: aspeed: harma: Add temperature device ARM: dts: aspeed: harma: Add fru device ARM: dts: aspeed: harma: Remove multi-host property ARM: dts: aspeed: harma: Add power monitor xdp710 ARM: dts: aspeed: harma: Add ina238 ARM: dts: aspeed: harma: Add sgpio name ARM: dts: aspeed: harma: Add VR devices ARM: dts: aspeed: harma: Revise hsc chip ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes ARM: dts: aspeed: Clean up AST2500 pinctrl properties ARM: dts: aspeed: Remove undocumented XDMA nodes ARM: dts: aspeed: Specify required properties for sram node ARM: dts: aspeed: Specify correct generic compatible for CVIC ARM: dts: aspeed: Fix coprocessor interrupt controller node name ... Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.12-rockchip-dts32-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt More pwm, i2s and i2c nodes for the RV1126 soc. * tag 'v6.12-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add pwm node for RV1126 ARM: dts: rockchip: Add i2s0 node for RV1126 ARM: dts: rockchip: Add i2c3 node for RV1126 Link: https://lore.kernel.org/r/1862312.dTVjPilprF@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'v6.12-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588 and some non-critical dts cleanups. * tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board arm64: dts: rockchip: add CAN-FD controller nodes to rk3568 arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE arm64: dts: rockchip: Add GameForce Ace dt-bindings: arm: rockchip: Add GameForce Ace arm64: dts: rockchip: rk3588s fix sdio pins to pull up arm64: dts: rockchip: Add RGA2 support to rk3588 arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b arm64: dts: rockchip: Add Hardkernel ODROID-M2 dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2 arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6 Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'arm-soc/for-6.12/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom SoCs Device Tree changes for 6.12, please pull the following: - Krzysztof documents the AVS monitor binding present on 2711 (Raspberry Pi 4) - Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM binding - Artur factors the nodes between the BCM21664 and BCM23550 SoCs since they are nearly identical - Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML binding syntax * tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux: dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml dt-bindings: timer: convert bcm2835-system-timer bindings to YAML ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550 ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS ARM: dts: broadcom: convert NVMEM content to layout syntax dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'dt-cleanup-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.12 1. Realview: correct unit addresses (e.g. drop when not valid). 2. Nuvoton: correct node name to match bindings. * tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindings arm: dts: realview: Add/drop missing/spurious unit-addreses Link: https://lore.kernel.org/r/20240906140513.71307-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11Merge tag 'intel-pinctrl-v6.12-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.12-1 * Enable High Impedance pin configuration support for Intel pin control * Miscellaneous small improvements here and there The following is an automated git shortlog grouped by driver: baytrail: - Drop duplicate return statement intel: - Constify struct intel_pinctrl parameter - Inline intel_gpio_community_irq_handler() - Introduce for_each_intel_gpio_group() helper et al. - Constify intel_get_community() returned object - Implement high impedance support - Add __intel_gpio_get_direction() helper - Refactor __intel_gpio_set_direction() to be more useful - Move debounce validation out of the lock Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-09-11Merge tag 'dt64-cleanup-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.12 1. APM: correct node name to match bindings. 2. Spreadtrum: correct node names to match bindings, order properties to match DTS coding style and put SPDX identifier at top of the file as expected usually. * tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: sprd: move/add SPDX license to top of the file arm64: dts: sprd: reorder clock-names after clocks arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11drm/i915/bios: fix printk format widthJani Nikula
s/0x04%x/0x%04x/ to use 0 prefixed width 4 instead of printing 04 verbatim. Fixes: 51f5748179d4 ("drm/i915/bios: create fake child devices on missing VBT") Cc: stable@vger.kernel.org # v5.13+ Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905112519.4186408-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 54df34c5a2439b481f066476e67bfa21a0a640e5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 20:12:05 +0000