| Age | Commit message (Collapse) | Author |
|---|
|
This patch aims to allocate bvpages and short-lived compressed pages
from the reserved pool first.
After applying this patch, there are three benefits.
1. It reduces the page allocation time.
The bvpages and short-lived compressed pages account for about 4% of
the pages allocated from the system in the multi-app launch benchmarks
[1]. It reduces the page allocation time accordingly and lowers the
likelihood of blockage by page allocation in low memory scenarios.
2. The pages in the reserved pool will be allocated on demand.
Currently, bvpages and short-lived compressed pages are short-lived
pages allocated from the system, and the pages in the reserved pool all
originate from short-lived pages. Consequently, the number of reserved
pool pages will increase to z_erofs_rsv_nrpages over time.
With this patch, all short-lived pages are allocated from the reserved
pool first, so the number of reserved pool pages will only increase when
there are not enough pages. Thus, even if z_erofs_rsv_nrpages is set to
a large number for specific reasons, the actual number of reserved pool
pages may remain low as per demand. In the multi-app launch benchmarks
[1], z_erofs_rsv_nrpages is set at 256, while the number of reserved
pool pages remains below 64.
3. When erofs cache decompression is disabled
(EROFS_ZIP_CACHE_DISABLED), all pages will *only* be allocated from
the reserved pool for erofs. This will significantly reduce the memory
pressure from erofs.
[1] For additional details on the multi-app launch benchmarks, please
refer to commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression").
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240906121110.3701889-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Implement function kvm_para_has_feature() to detect supported paravirt
features. It can be used by device driver to detect and enable paravirt
features, such as the EIOINTC irqchip driver is able to detect feature
KVM_FEATURE_VIRT_EXTIOI and do some optimization.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c0b (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dma_supported has become too much spaghetti for my taste. Reflow it to
remove the duplicate use_dma_iommu condition and make the main path more
obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12 part 2
ARM64 device tree and binding-only changes
- Add system and pin voltage regulator supplies for NanoPi NEO Plus2
* tag 'sunxi-dt-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
Link: https://lore.kernel.org/r/ZuKmwD8VQrvNx8ir@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Nam Cao <namcao@linutronix.de> says:
Hi,
For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.
Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.
This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.
Also some cleanup and documentation along the way.
* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...
Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size. This causes
build failures if the kernel gets too big [1].
Remove this limit.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404211031.J6l2AfJk-lkp@intel.com [1]
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/3bf3a77be10ebb0d8086c028500baa16e7a8e648.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded value entirely, stop using
XIP_OFFSET in create_kernel_page_table(). Instead use _sdata and _start to
do the same thing.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/4ea3f222a7eb9f91c04b155ff2e4d3ef19158acc.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely,
remove the use of XIP_OFFSET in kernel_mapping_va_to_pa(). The macro
XIP_OFFSET is used in this case to check if the virtual address is mapped
to Flash or to RAM. The same check can be done with kernel_map.xiprom_sz.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/644c13d9467525a06f5d63d157875a35b2edb4bc.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop
using XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET. Instead, use __data_loc and
_sdata to do the same thing.
While at it, also add a description for XIP_FIXUP_FLASH_OFFSET.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/7b3319657edd1822f3457e7e7c07aaa326cc2f87.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
XIP_OFFSET is the hard-coded offset of writable data section within the
kernel.
By hard-coding this value, the read-only section of the kernel (which is
placed before the writable data section) is restricted in size.
As a preparation to remove this hard-coded macro XIP_OFFSET entirely, stop
using XIP_OFFSET in XIP_FIXUP_OFFSET. Instead, use CONFIG_PHYS_RAM_BASE and
_sdata to do the same thing.
While at it, also add a description for XIP_FIXUP_OFFSET.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/dba0409518b14ee83b346e099b1f7f934daf7b74.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
On XIP kernel, the name "va_kernel_pa_offset" is misleading: unlike
"normal" kernel, it is not the virtual-physical address offset of kernel
mapping, it is the offset of kernel mapping's first virtual address to
first physical address in DRAM, which is not meaningful because the
kernel's first physical address is not in DRAM.
For XIP kernel, there are 2 different offsets because the read-only part of
the kernel resides in ROM while the rest is in RAM. The offset to ROM is in
kernel_map.va_kernel_xip_pa_offset, while the offset to RAM is not stored
anywhere: it is calculated on-the-fly.
Remove this confusing "va_kernel_pa_offset" and add
"va_kernel_xip_data_pa_offset" as its replacement. This new variable is the
offset of virtual mapping of the kernel's data portion to the corresponding
physical addresses.
With the introduction of this new variable, also rename
va_kernel_xip_pa_offset -> va_kernel_xip_text_pa_offset to make it clear
that this one is about the .text section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/84e5d005c1386d88d7b2531e0b6707ec5352ee54.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The crash utility uses va_kernel_pa_offset to translate virtual addresses.
This is incorrect in the case of XIP kernel, because va_kernel_pa_offset is
not the virtual-physical address offset (yes, the name is misleading; this
variable will be removed for XIP in a following commit).
Stop exporting this variable for XIP kernel. The replacement is to be
determined, note it as a TODO for now.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/8f8760d3f9a11af4ea0acbc247e4f49ff5d317e9.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The XIP_FIXUP macro is used to fix addresses early during boot before MMU:
generated code "thinks" the data section is in ROM while it is actually in
RAM. So this macro corrects the addresses in the data section.
This macro determines if the address needs to be fixed by checking if it is
within the range starting from ROM address up to the size of (2 *
XIP_OFFSET).
This means if the kernel size is bigger than (2 * XIP_OFFSET), some
addresses would not be fixed up.
XIP kernel can still work if the above scenario does not happen. But this
macro is obviously incorrect.
Rewrite this macro to only fix up addresses within the data section.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/95f50a4ec8204ec4fcbf2a80c9addea0e0609e3b.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
bo_meminfo() wants to inspect bo state like tt and the ttm resource,
however this state can change at any point leading to stuff like NPD and
UAF, if the bo lock is not held. Grab the bo lock when calling
bo_meminfo(), ensuring we drop any spinlocks first. In the case of
object_idr we now also need to hold a ref.
v2 (MattB)
- Also add xe_bo_assert_held()
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-6-matthew.auld@intel.com
(cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There is a real deadlock as well as sleeping in atomic() bug in here, if
the bo put happens to be the last ref, since bo destruction wants to
grab the same spinlock and sleeping locks. Fix that by dropping the ref
using xe_bo_put_deferred(), and moving the final commit outside of the
lock. Dropping the lock around the put is tricky since the bo can go
out of scope and delete itself from the list, making it difficult to
navigate to the next list entry.
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911155527.178910-5-matthew.auld@intel.com
(cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable Xe2+ PES disaggregation (for OAG) to retrieve disaggregated metrics
when disaggregated data is needed. Userspace can select whether to receive
aggregated or disaggregated metrics via the particular OA configuration it
uses (programmed via DRM_XE_OBSERVATION_OP_ADD_CONFIG).
Bspec: 61101
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909165933.2638765-1-ashutosh.dixit@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit fb2551a0e93897aec7fb3d4f473ebc06b146d160)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It's supposed to be an open range at the end like in i915. Fingers
crossed that nobody relies on this definition.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 453afb1a439994deeacb8d9ecbb48c1f2348ea0a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Check size of the data not size of the pointer.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407300421.IBkAja96-lkp@intel.com/
Fixes: ddeb7989a98f ("drm/xe: Validate user fence during creation")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Apoorva Singh <apoorva.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806110722.28661-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit e102b5ed6e283a144793cab8fcd95f61d0ddbadb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Store xe_device ahead of processing message as message can be free'd in
some cases.
v2:
- Including missing local changes
v3:
- Resend for CI
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202407231445.rpisd1vA-lkp@intel.com/
Fixes: 55ea73aacfb9 ("drm/xe: Build PM into GuC CT layer")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724164341.1848954-1-matthew.brost@intel.com
(cherry picked from commit 1a394b4f504f33eac8c38b6f42ba025105c7e869)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
'fence' argument in send_tlb_invalidation cannot be NULL, remove
non-NULL check from send_tlb_invalidation.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202407231049.esig0Fkb-lkp@intel.com/
Fixes: 58bfe6674467 ("drm/xe: Drop xe_gt_tlb_invalidation_wait")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723190714.1744653-1-matthew.brost@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 6482253e6e1ad1c3a76645a3899d3cfdb5b918cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The header generated/xe_wa_oob.h is included twice. Remove one.
Fixes: 27cb2b7fec2a ("drm/xe/bmg: implement Wa_16023588340")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202407052122.AzuWSPuo-lkp@intel.com/
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708173301.1543871-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 3d122660dc70029d9cccb4e8670125f0affa959e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
nf_flow_table_module_init()
Move nf flowtable bpf initialization in nf_flow_table module load
routine since nf_flow_table_bpf is part of nf_flow_table module and not
nf_flow_table_inet one. This patch allows to avoid the following kernel
warning running the reproducer below:
$modprobe nf_flow_table_inet
$rmmod nf_flow_table_inet
$modprobe nf_flow_table_inet
modprobe: ERROR: could not insert 'nf_flow_table_inet': Invalid argument
[ 184.081501] ------------[ cut here ]------------
[ 184.081527] WARNING: CPU: 0 PID: 1362 at kernel/bpf/btf.c:8206 btf_populate_kfunc_set+0x23c/0x330
[ 184.081550] CPU: 0 UID: 0 PID: 1362 Comm: modprobe Kdump: loaded Not tainted 6.11.0-0.rc5.22.el10.x86_64 #1
[ 184.081553] Hardware name: Red Hat OpenStack Compute, BIOS 1.14.0-1.module+el8.4.0+8855+a9e237a9 04/01/2014
[ 184.081554] RIP: 0010:btf_populate_kfunc_set+0x23c/0x330
[ 184.081558] RSP: 0018:ff22cfb38071fc90 EFLAGS: 00010202
[ 184.081559] RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000
[ 184.081560] RDX: 000000000000006e RSI: ffffffff95c00000 RDI: ff13805543436350
[ 184.081561] RBP: ffffffffc0e22180 R08: ff13805543410808 R09: 000000000001ec00
[ 184.081562] R10: ff13805541c8113c R11: 0000000000000010 R12: ff13805541b83c00
[ 184.081563] R13: ff13805543410800 R14: 0000000000000001 R15: ffffffffc0e2259a
[ 184.081564] FS: 00007fa436c46740(0000) GS:ff1380557ba00000(0000) knlGS:0000000000000000
[ 184.081569] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 184.081570] CR2: 000055e7b3187000 CR3: 0000000100c48003 CR4: 0000000000771ef0
[ 184.081571] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 184.081572] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 184.081572] PKRU: 55555554
[ 184.081574] Call Trace:
[ 184.081575] <TASK>
[ 184.081578] ? show_trace_log_lvl+0x1b0/0x2f0
[ 184.081580] ? show_trace_log_lvl+0x1b0/0x2f0
[ 184.081582] ? __register_btf_kfunc_id_set+0x199/0x200
[ 184.081585] ? btf_populate_kfunc_set+0x23c/0x330
[ 184.081586] ? __warn.cold+0x93/0xed
[ 184.081590] ? btf_populate_kfunc_set+0x23c/0x330
[ 184.081592] ? report_bug+0xff/0x140
[ 184.081594] ? handle_bug+0x3a/0x70
[ 184.081596] ? exc_invalid_op+0x17/0x70
[ 184.081597] ? asm_exc_invalid_op+0x1a/0x20
[ 184.081601] ? btf_populate_kfunc_set+0x23c/0x330
[ 184.081602] __register_btf_kfunc_id_set+0x199/0x200
[ 184.081605] ? __pfx_nf_flow_inet_module_init+0x10/0x10 [nf_flow_table_inet]
[ 184.081607] do_one_initcall+0x58/0x300
[ 184.081611] do_init_module+0x60/0x230
[ 184.081614] __do_sys_init_module+0x17a/0x1b0
[ 184.081617] do_syscall_64+0x7d/0x160
[ 184.081620] ? __count_memcg_events+0x58/0xf0
[ 184.081623] ? handle_mm_fault+0x234/0x350
[ 184.081626] ? do_user_addr_fault+0x347/0x640
[ 184.081630] ? clear_bhb_loop+0x25/0x80
[ 184.081633] ? clear_bhb_loop+0x25/0x80
[ 184.081634] ? clear_bhb_loop+0x25/0x80
[ 184.081637] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 184.081639] RIP: 0033:0x7fa43652e4ce
[ 184.081647] RSP: 002b:00007ffe8213be18 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 184.081649] RAX: ffffffffffffffda RBX: 000055e7b3176c20 RCX: 00007fa43652e4ce
[ 184.081650] RDX: 000055e7737fde79 RSI: 0000000000003990 RDI: 000055e7b3185380
[ 184.081651] RBP: 000055e7737fde79 R08: 0000000000000007 R09: 000055e7b3179bd0
[ 184.081651] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000040000
[ 184.081652] R13: 000055e7b3176fa0 R14: 0000000000000000 R15: 000055e7b3179b80
Fixes: 391bb6594fd3 ("netfilter: Add bpf_xdp_flow_lookup kfunc")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240911-nf-flowtable-bpf-modprob-fix-v1-1-f9fc075aafc3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ret is being assigned, but not being used. Remove the assignment.
One of the reviewer mentioned that dev_warn should be replaced with
dev_info. Make this change as well.
Fixes: 1bf6dbd75f76 ("ASoc: mediatek: mt8365: Add a specific soundcard for EVK")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240911123629.125686-1-usama.anjum@collabora.com
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flag of FW_ISO_CONTEXT_COMPLETIONS_CAUSE_IRQ directly causes hardIRQ
request by 1394 OHCI hardware when the corresponding isochronous packet is
transferred, however it is not so directly associated to hardIRQ
processing itself.
This commit renames the flag so that it relates to interrupt parameter of
internal packet data.
Link: https://lore.kernel.org/r/20240912133038.238786-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
There is a slight difference between fw_iso_context_flush_completions() and
fw_iso_context_schedule_flush_completions().
This commit updates the documentations for them.
Link: https://lore.kernel.org/r/20240912133038.238786-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Both IR/IT contexts use the same code to retire completed descriptors
as AT context uses.
This commit adds a helper function to reduce the duplicated codes.
Link: https://lore.kernel.org/r/20240912133038.238786-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
function"
This reverts commit 767bfb9ef27ebf760290d9f8bc303828b018c312. It appears
that the call of ohci_flush_iso_completions() in the work item scheduled
by hardIRQ of 1394 OHCI for any isochronous context changes the timing to
queue events in the view of user space application.
Link: https://lore.kernel.org/r/20240912133038.238786-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
completions"
This reverts commit d9605d67562505e27dcc0f71af418118d3db91e5, since this
commit is on the following reverted changes.
Link: https://lore.kernel.org/r/20240912133038.238786-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains two fixes from Florian Westphal:
Patch #1 fixes a sk refcount leak in nft_socket on mismatch.
Patch #2 fixes cgroupsv2 matching from containers due to incorrect
level in subtree.
netfilter pull request 24-09-12
* tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
====================
Link: https://patch.msgid.link/20240911222520.3606-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
25216afc9db5 ("PCI: Add managed pcim_intx()") moved the allocation step for
pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As
before, pcim_enable_device() sets pci_dev.is_managed to true; and it is
never set to false again.
Due to the lifecycle of a struct pci_dev, it can happen that a second
driver obtains the same pci_dev after a first driver ran. If one driver
uses pcim_enable_device() and the other doesn't, this causes the other
driver to run into managed pcim_intx(), which will try to allocate when
called for the first time.
Allocations might sleep, so calling pci_intx() while holding spinlocks
becomes then invalid, which causes lockdep warnings and could cause
deadlocks:
========================================================
WARNING: possible irq lock inversion dependency detected
6.11.0-rc6+ #59 Tainted: G W
--------------------------------------------------------
CPU 0/KVM/1537 just changed the state of lock:
ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at:
vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another,
HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&vdev->irqlock);
lock(fs_reclaim);
<Interrupt>
lock(&vdev->irqlock);
*** DEADLOCK ***
Have pcim_enable_device()'s release function, pcim_disable_device(), set
pci_dev.is_managed to false so that subsequent drivers using the same
struct pci_dev do not implicitly run into managed code.
Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com
Fixes: 25216afc9db5 ("PCI: Add managed pcim_intx()")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
* for-next/timers:
arm64: Implement prctl(PR_{G,S}ET_TSC)
|
|
* for-next/selftests:
kselftest/arm64: Fix build warnings for ptrace
kselftest/arm64: Actually test SME vector length changes via sigreturn
kselftest/arm64: signal: fix/refactor SVE vector length enumeration
|
|
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
|
|
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
|
|
* for-next/perf: (33 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
perf/arm-cmn: Ensure dtm_idx is big enough
perf/arm-cmn: Fix CCLA register offset
perf/arm-cmn: Refactor node ID handling. Again.
drivers/perf: hisi_pcie: Export supported Root Ports [bdf_min, bdf_max]
drivers/perf: hisi_pcie: Fix TLP headers bandwidth counting
drivers/perf: hisi_pcie: Record hardware counts correctly
drivers/perf: arm_spe: Use perf_allow_kernel() for permissions
perf/dwc_pcie: Add support for QCOM vendor devices
...
|
|
* for-next/mm:
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
|
|
* for-next/misc:
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: Constify struct kobj_type
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
arm64/sve: Remove unused declaration read_smcr_features()
arm64: mm: Remove unused declaration early_io_map()
arm64: el2_setup.h: Rename some labels to be more diff-friendly
arm64: signal: Fix some under-bracketed UAPI macros
arm64/mm: Drop TCR_SMP_FLAGS
arm64/mm: Drop PMD_SECT_VALID
|
|
* for-next/errata:
arm64: errata: Enable the AC03_CPU_38 workaround for ampere1a
|
|
* for-next/acpi:
ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
ACPI: ARM64: add acpi_iort.h to MAINTAINERS
ACPI/IORT: Switch to use kmemdup_array()
|
|
Adding HDMI-In capture support for the ARL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added match table entry on arl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do not set common_hdmi_codec_drv in SOF platform driver since no
machine driver needs it. Remove member variable common_hdmi_codec_drv
from snd_soc_acpi_mach_params structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The variable common_hdmi_codec_drv is always true on SOF platform so
we could remove the reference in machine driver.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The variable common_hdmi_codec_drv is always true on SOF platform so
we could remove the reference in machine driver.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use intel_board module to create DAI link array for Intel iDisp HDMI,
HDA external codec, DMIC01, DMIC16K, and BT audio offload DAI BE links.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper function for machine drivers to initialize HDA external
codec DAI link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With iterative development, our codebase can now deal with compressed
buffer misses properly if both in-place I/O and compressed buffer
allocation fail.
Note that if readahead fails (with non-uptodate folios), the original
request will then fall back to synchronous read, and `.read_folio()`
should return appropriate errnos; otherwise -EIO will be passed to
user space, which is unexpected.
To simplify rarely encountered failure paths, a mimic decompression
will be just used. Before that, failure reasons are recorded in
compressed_bvecs[] and they also act as placeholders to avoid in-place
pages. They will be parsed just before decompression and then pass
back to `.read_folio()`.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240905084732.2684515-1-hsiangkao@linux.alibaba.com
|
