| Age | Commit message (Collapse) | Author |
|---|
|
At least upower prefers the more precise charge_now sysfs value over
capacity and the max17042 has the info, so lets export it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The info is there, lets export it as a property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The PROP_CHARGE_FULL code was hardcoded for the default sense
resistor of 0.010 Ohm, make it use r_sns which contains the
actual sense resistor value in micro-Ohms instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The info is there, so lets export it, like we already do for VOLT_MAX.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The max17042 is intended for Li-Ion or Li-Po batteries, add a TECHNOLOGY
attribute to reflect this. Note this is hardcoded to Li-Ion as there is
no way to tell the difference, and Lithium-Ion Polymer batteries are
a sub-family of Lithium-Ion so Li-Ion technically is correct for both.
Using Li-Ion for both is already done by many drivers and is much
better then not providing any technology info at all.
Suggested-by: Wolfgang Wiedmeyer <wolfgit@wiedmeyer.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
If our supplier changes status, chances are we've changed status too,
let any listeners know about this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Userspace prefers the driver having a status property over having to guess
itself. Specifically this will properly make the GNOME3 UI (and likely
others) properly show discharging / charging / full status, instead
of always showing discharging as status.
Note that in the case there is no charger driver supplying the max17042,
then a status of unknown will get returned. At least upower treats
this the same as not having a status attribute, so in this case nothing
changes from a userspace pov.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Some x86 machines use a max17047 fuel-gauge and x86 might be missing
platform_data if not provided by SFI.
This commit adds default platform_data as fallback option so that the
driver can work on boards where no platform_data is provided.
Since not all boards have a thermistor hooked up, set temp_min to 0 and
change the health checks from temp <= temp_min to temp < temp_min to
not trigger on such boards (where temp reads 0).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The temp alert values are 8-bit 2's complement, so sign-extend them
before reporting them back to the caller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Use sign_extend32 to sign-extend variables where necessary instead of
DIY code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
trivial fix to spelling mistake in dev_error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
When using dmatest with sg_buffers=128 I stumbled upon the problem, that
the "map_cnt" variable of "struct dmaengine_unmap_data" was set to 0.
"map_cnt" is an "u8" variable, resulting in an overrun when its
value is set to src_cnt + dst_cnt, to twice the sg_buffer value.
This patch adds a small check to dmatest, so that this confusing error
is detected and the test is aborted.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kedareswara rao Appana <appanad@xilinx.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
To enable usage of multiple SG buffers via the sg_buffers= module
parameter, lets select DMA_ENGINE_RAID via Kconfig when DMATEST is
configured. Otherwise the dmatest will "BUG" when more than 1
buffer (total of 2 for src + dst) is configured via sg_buffers.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kedareswara rao Appana <appanad@xilinx.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
When CONFIG_IIO=m and the axp20x_usb_power driver is built-in, we get
a link time error:
drivers/power/built-in.o: In function `axp20x_usb_power_get_property':
undefined reference to `iio_read_channel_processed'
drivers/power/built-in.o: In function `axp20x_usb_power_probe':
undefined reference to `devm_iio_channel_get'
undefined reference to `devm_iio_channel_get'
This adds the same dependency that we already have for the AC power driver
to the USB power driver. For consistency, I'm also moving the two closer
together in the Kconfig file.
Fixes: 33863c938caa ("power: supply: axp20x_usb_power: use IIO channels when available")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Function devm_kzalloc() will return a NULL pointer. However, in function
isp1704_charger_probe(), the return value of devm_kzalloc() is directly
used without validation. This may result in a bad memory access bug.
Fixes: 34a109610e2a ("isp1704_charger: Add DT support")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Since we use the default primary handler for the irq, IRQF_ONESHOT must
be set. Otherwise the request fails and the following errors are
displayed:
genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 129
sbs-battery 0-000b: Failed to request irq: -22
Signed-off-by: Ryosuke Saito <raitosyo@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The X-Powers AXP20X and AXP22X PMICs can have a battery as power supply.
This patch adds the battery power supply driver to get various data from
the PMIC, such as the battery status (charging, discharging, full,
dead), current max limit, current current, battery capacity (in
percentage), voltage max and min limits, current voltage and battery
capacity (in Ah).
This battery driver uses the AXP20X/AXP22X ADC driver as PMIC data
provider.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
The X-Powers AXP20X and AXP22X PMICs can have a battery as power supply.
This patch adds the DT binding documentation for the battery power
supply which gets various data from the PMIC, such as the battery status
(charging, discharging, full, dead), current max limit, current current,
battery capacity (in percentage), voltage max and min limits, current
voltage and battery capacity (in Ah).
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
features in charger
The driver was registering two classes, bq24190-battery & -charger.
Because the power supply framework cannot surface features from multiple
drivers in a single class, a fuel gauge driver would create a third class,
which some power management utilities cannot see.
Deprecate the -battery class for future removal and replicate its features
in -charger. Set /sys/class...-charger/online = pg_stat && !batfet_disable.
If device_property "omit-battery-class" is set, don't register -battery.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
no suppliers
It is sensible to assume that the hardware actually always has a
way of charging the battery so when power_supply_am_i_supplied does not
find any suppliers, that does not mean that there are none, but simply
that no power_supply-drivers are registered / bound for any suppliers for
the supply calling power_supply_am_i_supplied.
At which point a fuel-gauge driver calling power_supply_am_i_supplied()
cannot determine whether the battery is being charged or not.
Allow a caller of power_supply_am_i_supplied to differentiate between
there not being any suppliers, vs no suppliers being online by returning
-ENODEV if there are no suppliers matching supplied_to / supplied_from,
which allows fuel-gauge drivers to return POWER_SUPPLY_STATUS_UNKNOWN
rather then POWER_SUPPLY_STATUS_DISCHARGING if there are no suppliers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table,
then remove it from the nat_bysource_table via nat_extend->destroy.
But now, the nat extension is attached on demand, so if the nat extension
is not attached, we will not be notified when the ct is destroyed, i.e.
we may fail to remove ct from the nat_bysource_table.
So just keep it simple, even if the extension is not attached, we will
still invoke the related ext->destroy. And this will also preserve the
flexibility for the future extension.
Fixes: 9a08ecfe74d7 ("netfilter: don't attach a nat extension by default")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next
Simon Horman says:
====================
Third Round of IPVS Updates for v4.12
please consider these enhancements to IPVS for v4.12.
If it is too late for v4.12 then please consider them for v4.13.
* Remove unused function
* Correct comparison of unsigned value
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
net/ipv4/netfilter/nf_nat_snmp_basic.c:1158:1: warning: the frame size
of 1160 bytes is larger than 1024 bytes
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We can't assume that the battery is or stays present after probing
on devices with replaceable battery.
On some devices (e.g. GTA04 or OpenPanodra) it can be removed
and even be hot swapped by the user while device continues to operate
through external AC or USB power (as long as system power consumption
remains below ca. 500mA as provided by USB). Under certain conditions
it is possible to boot without battery.
So it makes no sense to check for this situation during probe and make
the charger driver (and its status reports) completely non-operational if
the battery can be inserted later.
Tested on: GTA04 and OpenPandora.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Currently, the twl4030 charger defines its own max_current by directly
creating sysfs nodes. It should use the input_current_limit property
which is e.g. used by the bq24257 driver.
This patch adds the input_current_property with the same semantics as
the max_current property. The code to manage the max_current property
is removed by a separate patch.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
Allow platform-code to disable the reset on probe and suspend/resume
by setting a "disable-reset" boolean device property on the device.
There are several reasons why the platform-code may want to disable
the reset on probe and suspend/resume:
1) Resetting the charger should never be necessary it should always have
sane values programmed. If it is running with invalid values while we
are not running (system turned off or suspended) there is a big problem
as that may lead to overcharging the battery.
2) The reset in suspend() is meant to put the charger back into default
mode, but this is not necessary and not a good idea. If the charger has
been programmed with a higher max charge_current / charge_voltage then
putting it back in default-mode will reset those to the safe power-on
defaults, leading to slower charging, or charging to a lower voltage
(and thus not using the full capacity) while suspended which is
undesirable. Reprogramming the max charge_current / charge_voltage
after the reset will not help here as that will put the charger back
in host mode and start the i2c watchdog if the host then does not do
anything for 40s (iow if we're suspended for more then 40s) the watchdog
expires resetting the device to default-mode, including resetting all
the registers to there safe power-on defaults. So the only way to keep
using custom charge settings while suspending is to keep the charger in
its normal running state with the i2c watchdog disabled. This is fine
as the charger will still automatically switch from constant current
to constant voltage and stop charging when the battery is full.
3) Besides never being necessary resetting the charger also causes
problems on systems where the charge voltage limit is set higher then the
reset value, if this is the case and the charger is reset while charging
and the battery voltage is between the 2 voltages, then about half the
time the charger gets confused and claims to be charging (REG08 contains
0x64) but in reality the charger has decoupled itself from VBUS (Q1 off)
and is drawing 0A from VBUS, leaving the system running from the battery.
This last problem is happening on a GPD-win mini PC with a bq24292i
charger chip combined with a max17047 fuel-gauge and a LiHV battery.
I've checked and TI does not list any errata for the bq24292i which
could explain this (there are no errata at all).
Cc: Liam Breck <kernel@networkimprov.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
|
|
nf_unregister_net_hook(s) can avoid a second call to synchronize_net,
provided there is no nfqueue active in that net namespace (which is
the common case).
This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally
this gets called during netns cleanup so no packets should be queued.
For the rare case of base chain being unregistered or module removal
while nfqueue is in use the extra hiccup due to the packet drops isn't
a big deal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_log_unregister() (which is what gets called in the logger backends
module exit paths) does a (required, module is removed) synchronize_rcu().
But nf_log_unset() is only called from pernet exit handlers. It doesn't
free any memory so there appears to be no need to call synchronize_rcu.
v2: Liping Zhang points out that nf_log_unregister() needs to be called
after pernet unregister, else rmmod would become unsafe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
synchronize_net is expensive and slows down netns cleanup a lot.
We have two APIs to unregister a hook:
nf_unregister_net_hook (which calls synchronize_net())
and
nf_unregister_net_hooks (calls nf_unregister_net_hook in a loop)
Make nf_unregister_net_hook a wapper around new helper
__nf_unregister_net_hook, which unlinks the hook but does not free it.
Then, we can call that helper in nf_unregister_net_hooks and then
call synchronize_net() only once.
Andrey Konovalov reports this change improves syzkaller fuzzing speed at
least twice.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This was a hack we added to work around the allmodconfig build breaking, see
commit fb43e8477ed9 ("powerpc: Disable RELOCATABLE for COMPILE_TEST with
PPC64").
Since we merged the thin archives support in commit 43c9127d94d6 ("powerpc: Add
option to use thin archives") this hasn't been necessary, so remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a
print which assumes SLB problems. With radix, these vectors have different
meanings.
This patch updates the oops message to reflect these different meanings.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
AVR32 architecture has been removed from the Linux kernel sources, hence
clean up the special handling setting two quicklists by default in
mm/Kconfig.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
The AVR32 architecture support has been removed from the Linux kernel,
hence remove all the check for this architecture in test_user_copy.c.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
AVR32 architecture has been removed from the Linux kernel sources, hence
clean up the architecture related symbols in lib/Kconfig.debug.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
The AVR32 architecture support has been removed from the kernel, hence
remove the related bits from checkstack.pl script.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
The AVR32 architecture support has been removed from the Linux kernel,
hence remove all references to it from Documentation.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
This patch drops support for AVR32 architecture from the Linux kernel.
The AVR32 architecture is not keeping up with the development of the
kernel, and since it shares so much of the drivers with Atmel ARM SoC,
it is starting to hinder these drivers to develop swiftly.
Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
Microchip).
Finally, the GCC toolchain is stuck at version 4.2.x, and has not
received any patches since the last release from Atmel;
4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this
toolchain is no longer able to properly link the network stack.
Haavard and I have came to the conclusion that we feel keeping AVR32 on
life support offers more obstacles for Atmel ARMs, than it gives joy to
AVR32 users. I also suspect there are very few AVR32 users left today,
if anybody at all.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
reference to fix pmem crash
The x86 conversion to the generic GUP code included a small change which causes
crashes and data corruption in the pmem code - not good.
The root cause is that the /dev/pmem driver code implicitly relies on the x86
get_user_pages() implementation doing a get_page() on the page refcount, because
get_page() does a get_zone_device_page() which properly refcounts pmem's separate
page struct arrays that are not present in the regular page struct structures.
(The pmem driver does this because it can cover huge memory areas.)
But the x86 conversion to the generic GUP code changed the get_page() to
page_cache_get_speculative() which is faster but doesn't do the
get_zone_device_page() call the pmem code relies on.
One way to solve the regression would be to change the generic GUP code to use
get_page(), but that would slow things down a bit and punish other generic-GUP
using architectures for an x86-ism they did not care about. (Arguably the pmem
driver was probably not working reliably for them: but nvdimm is an Intel
feature, so non-x86 exposure is probably still limited.)
So restructure the pmem code's interface with the MM instead: get rid of the
get/put_zone_device_page() distinction, integrate put_zone_device_page() into
__put_page() and and restructure the pmem completion-wait and teardown machinery:
Kirill points out that the calls to {get,put}_dev_pagemap() can be
removed from the mm fast path if we take a single get_dev_pagemap()
reference to signify that the page is alive and use the final put of the
page to drop that reference.
This does require some care to make sure that any waits for the
percpu_ref to drop to zero occur *after* devm_memremap_page_release(),
since it now maintains its own elevated reference.
This speeds up things while also making the pmem refcounting more robust going
forward.
Suggested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/149339998297.24933.1129582806028305912.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch allows users to enable/disable internal TX and/or RX
clock delay for BCM5481x series PHYs so as to satisfy RGMII timing
specifications.
On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
trivial fix to spelling mistakes in printk message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.
Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.
This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:
Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656
Faulting instruction address: 0xc00000000080ef8c
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common
CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2
task: c00000ffd4892400 task.stack: c00000ffd4920000
NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320
REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
CR: 24082042 XER: 00000000
CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1
GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100
GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000
GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f
GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001
GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000
GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a
GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100
NIP [c00000000080ef8c] __skb_clone+0xdc/0x140
LR [c00000000080eee8] __skb_clone+0x38/0x140
Call Trace:
[c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable)
[c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510
[c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80
[c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0
[c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260
[c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x]
[c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480
[c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0
[c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120
[c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200
[c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24
[c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110
[c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Commit 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb
entries") added the ability to "take over an entry which was previously
learned via HW when it shows up from a SW port".
However, if an entry was learned via HW and then a control packet
(e.g., ARP request) was trapped to the CPU, the bridge driver will
update the entry and remove the externally learned flag, although the
entry is still present in HW. Instead, only clear the externally learned
flag in case of roaming.
Fixes: 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb entries")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 1215e51edad1 ("ipv4: fix a deadlock in ip_ra_control")
we always take RTNL lock for ip_ra_control() which is the only place
we update the list ip_ra_chain, so the ip_ra_lock is no longer needed.
As Eric points out, BH does not need to disable either, RCU readers
don't care.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct bpf_map_def was extended in commit fb30d4b71214 ("bpf: Add tests
for map-in-map") with member unsigned int inner_map_idx. This changed the size
of the maps section in the generated ELF _kern.o files.
Unfortunately the loader in bpf_load.c does not detect or handle this. Thus,
older _kern.o files became incompatible, and caused hard-to-debug errors
where the syscall validation rejected BPF_MAP_CREATE request.
This patch only detect the situation and aborts load_bpf_file(). It also
add code comments warning people that read this loader for inspiration
for these pitfalls.
Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We recently added a check to see if nla_nest_start() fails. There are
two issues with that. First, if it fails then I don't think we should
call nla_nest_cancel(). Second, it's slightly convoluted but the
current code returns success but we should return -EMSGSIZE instead.
Fixes: a50fe0ffd76f ("lwtunnel: check return value of nla_nest_start")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Presumably we never hit this return, but static checkers complain that
we need to unlock so we may as well fix that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
My static checker complains that we're holding a mutex on this error
path. Let's goto exit instead of returning directly.
Fixes: b0bccb69eba3 ("qed: Change locking scheme for VF channel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lipeng says:
====================
net: hns: bug fix for HNS driver
This patchset add support defered dsaf probe when mdio and
mbigen module is not insmod.
For more details, please refer to individual patch.
change log:
V4 - > V5:
1. Float on net-next;
2. Delete patch "net: hns: fixed bug that skb used after kfree"
from this patchset;
V3 -> V4:
1. Delete redundant commit message;
2. Add Reviewed-by: Matthias Brugger <mbrugger@suse.com>;
V2 -> V3:
1. Check return value when platform_get_irq in hns_rcb_get_cfg;
V1 -> V2:
1. Return appropriate errno in hns_mac_register_phy;
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
