| Age | Commit message (Collapse) | Author |
|---|
|
While at it, address warnings generated by shellcheck and fix following
minor issues:
- some distros place netem in 'extra' modules package, so add a skip check for netem-attach
failure.
- tc prints a warning for the 100mbit class:
"Warning: sch_htb: quantum of class 10001 is big. Consider r2q change."
Silence this by increasing the divisor.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace nc with socat. Too many different implementations of nc
are around with incompatible options ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only relevant change is that netns names have random suffix names,
i.e. its safe to run this in parallel with other tests.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Also, fix two issues reported by Pablo Neira:
1. Must modprobe br_netfilter in case its not loaded,
else sysctl cannot be set.
2. ping for netns4 fails if rp_filter is enabled in bridge netns,
so set all and default to 0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-4-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Doing so gets us dynamically generated netns names.
Also:
* do not assume rp_filter is disabled, if its on script failed
* reduce timeout (-W) for "expected to fail" ping commands
* don't print PASS line for basic sanity ping
* shellcheck cleanups
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
.. so this can start re-using existing lib.sh infra in next patches.
Several of these scripts will not work, e.g. because they assume
rp_filter is disabled, or reliance on a particular version/flavor
of "netcat" tool.
Add config settings for them.
nft_trans_stress.sh script is removed, it also exists in the nftables
userspace selftests. I do not see a reason to keep two versions in
different repositories/projects.
The settings file is removed for now:
It was used to increase the timeout to avoid slow scripts from getting
zapped by the 45s timeout, but some of the slow scripts can be sped up.
Re-add it later for scripts that cannot be sped up easily.
Update MAINTAINERS to reflect that future updates to netfilter
scripts should go through netfilter-devel@.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
incorrectly handles failures of scsi_resume_device() in
ata_scsi_dev_rescan(), leading to a double call to
spin_unlock_irqrestore() to unlock a device port. Fix this by redefining
the goto labels used in case of errors and only unlock the port
scsi_scan_mutex when scsi_resume_device() fails.
Bug found with the Smatch static checker warning:
drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan()
error: double unlocked 'ap->lock' (orig line 4757)
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d Fixes:
- Allocate local memory for PRQ page
- Fix WARN_ON in iommu probe path
- Fix wrong use of pasid config
- AMD IOMMU Fixes:
- Lock inversion fix
- Log message severity fix
- Disable SNP when v2 page-tables are used
- Mediatek driver:
- Fix module autoloading
* tag 'iommu-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Change log message severity
iommu/vt-d: Fix WARN_ON in iommu probe path
iommu/vt-d: Allocate local memory for page request queue
iommu/vt-d: Fix wrong use of pasid config
iommu: mtk: fix module autoloading
iommu/amd: Do not enable SNP when V2 page table is enabled
iommu/amd: Fix possible irq lock inversion dependency issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a quirk that prevented Secondary Bus Reset for LSI / Agere
FW643.
We thought the device was broken, but the reset does work correctly
on other platforms, and the reset avoids leaking data out of VMs
(Bjorn Helgaas)
- Update MAINTAINERS to reflect that Gustavo Pimentel is no longer
reachable (Manivannan Sadhasivam)
* tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Mark LSI FW643 to avoid bus reset"
MAINTAINERS: Drop Gustavo Pimentel as PCI DWC Maintainer
|
|
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The ice physical function driver needs to configure the association of
queues and interrupts on behalf of its virtual functions. This is done over
virtchnl by the VF sending messages during its initialization phase. These
messages contain a vector_id which the VF wants to associate with a given
queue. This ID is relative to the VF space, where 0 indicates the control
IRQ for non-queue interrupts.
When programming the mapping, the PF driver currently passes this vector_id
directly to the low level functions for programming. This works for SR-IOV,
because the hardware uses the VF-based indexing for interrupts.
This won't work for Scalable IOV, which uses PF-based indexing for
programming its VSIs. To handle this, the driver needs to be able to look
up the proper index to use for programming. For typical IRQs, this would be
the q_vector->reg_idx field.
The q_vector->reg_idx can't be set to a VF relative value, because it is
used when the PF needs to control the interrupt, such as when triggering a
software interrupt on stopping the Tx queue. Thus, introduce a new
q_vector->vf_reg_idx which can store the VF relative index for registers
which expect this.
Use this in ice_cfg_interrupt to look up the VF index from the q_vector.
This allows removing the vector ID parameter of ice_cfg_interrupt. Also
notice that this function returns an int, but then is cast to the virtchnl
error enumeration, virtchnl_status_code. Update the return type to indicate
it does not return an integer error code. We can't use normal error codes
here because the return values are passed across the virtchnl interface.
This will allow the future Scalable IOV VFs to correctly look up the index
needed for programming the VF queues without breaking SR-IOV.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit fe1c5ca2fe76 ("ice: implement num_msix field per VF") updated the
driver to allow for per-VF MSI-X configuration. The initial defaults were
set in ice_create_vf_entries(). This logic is better placed in
ice_initialize_vf_entry(). Indeed, that function already sets
vf->num_vf_qs, as well as initializes the allow list via calling
ice_vc_set_default_allowlist().
Move this logic into ice_initialize_vf_entry(). This makes the code clear,
and ensures that these VF fields will be initialized properly for both
SR-IOV VFs and the upcoming Scalable IOV VFs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for 'flow-type ether' Flow Director rules via ethtool.
Create packet segment info for filter configuration based on ethtool
command parameters. Reuse infrastructure already created for
ipv4 and ipv6 flows to convert packet segment into
extraction sequence, which is later used to program the filter
inside Flow Director block of the Rx pipeline.
Rules not containing masks are processed by the Flow Director,
and support the following set of input parameters in all combinations:
src, dst, proto, vlan-etype, vlan, action.
It is possible to specify address mask in ethtool parameters but only
00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
The same applies to proto, vlan-etype and vlan masks:
only 0x0000 and 0xffff masks are valid.
Testing:
(DUT) iperf3 -s
(DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \
action 10
(DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue'
(LP) iperf3 -c ${DUT_IP}
Counters increase only for:
'rx_queue_10_packets'
'rx_queue_10_bytes'
Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- UAF fix (Yu)
- Avoid out-of-bounds shift in blk-iocost (Rik)
- Fix for q->blkg_list corruption (Ming)
- Relax virt boundary mask/size segment checking (Ming)
* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
block: fix that blk_time_get_ns() doesn't update time after schedule
block: allow device to have both virt_boundary_mask and max segment size
block: fix q->blkg_list corruption during disk rebind
blk-iocost: avoid out of bounds shift
raid1: fix use-after-free for original bio in raid1_write_request()
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for sigmask restoring while waiting for events (Alexey)
- Typo fix in comment (Haiyue)
- Fix for a msg_control retstore on SEND_ZC retries (Pavel)
* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
io_uring/net: restore msg_control on sendzc retry
io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
|
|
Pull ceph fixes from Ilya Dryomov:
"Two CephFS fixes marked for stable and a MAINTAINERS update"
* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
MAINTAINERS: remove myself as a Reviewer for Ceph
ceph: switch to use cap_delay_lock for the unlink delay list
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
|
|
Commit d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.
It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.
In fact, let's make such breakage more obvious than some esoteric ftrace
record size option. If you can't parse tabs, you can't have page sizes.
Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard. But no, that does not
mean that it's ok.
I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary. But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.
Fixes: d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Passing v6 argument is unnecessary as flow_type is still
analyzed inside the function.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the buffer_percent accounting as it is dependent on three
variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active
pages there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched.
But the pages touched was incremented whenever any writer went to the
next subbuffer even if it wasn't the only one, so it was incremented
more than it should be causing the counter for how many subbuffers
currently have content incorrect, which caused the buffer_percent
that holds waiters until the ring buffer is filled to a given
percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Only update pages_touched when a new page is touched
tracing: hide unused ftrace_event_id_fops
tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
eventfs: Fix kernel-doc comments to functions
|
|
We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for
static_command_line, but the strings copied into static_command_line are
extra_command_line and command_line, rather than extra_command_line and
boot_command_line.
When strlen(command_line) > strlen(boot_command_line), static_command_line
will overflow.
This patch just recovers strlen(command_line) which was miss-consolidated
with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add
checks for the return value of memblock_alloc*()")
Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/
Fixes: f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")
Cc: stable@vger.kernel.org
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
If the device is unplugged and CONFIG_IIO is not supported, this will
result in a warning message at kernel/workqueue.
Only cancel delayed work in mcp2221_remove(), when CONFIG_IIO is enabled.
Signed-off-by: Abdelrahman Morsy <abdelrahmanhesham94@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for syscall_get_nr() to make it work even if tracing is disabled"
* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: scall: Save thread_info.syscall unconditionally on entry
|
|
Pull drm fixes from Dave Airlie:
"Looks like everyone woke up after holidays, this weeks pull has a
bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
i915/xe have a few, a bunch of msm fixes, then some scattered driver
fixes.
I expect things will settle down for rc5.
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow"
* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
amdkfd: use calloc instead of kzalloc to avoid integer overflow
drm/xe: Label RING_CONTEXT_CONTROL as masked
drm/xe/xe_migrate: Cast to output precision before multiplying operands
drm/xe/hwmon: Cast result to output precision on left shift of operand
drm/xe/display: Fix double mutex initialization
drm/amdgpu: differentiate external rev id for gfx 11.5.0
drm/amd/display: Adjust dprefclk by down spread percentage.
drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
drm/amd/display: fix disable otg wa logic in DCN316
drm/amd/display: Do not recursively call manual trigger programming
drm/amd/display: always reset ODM mode in context when adding first plane
drm/amdgpu: fix incorrect number of active RBs for gfx11
drm/amd/display: Return max resolution supported by DWB
amd/amdkfd: sync all devices to wait all processes being evicted
drm/amdgpu: clear set_q_mode_offs when VM changed
drm/amdgpu: Fix VCN allocation in CPX partition
drm/amd/pm: fix the high voltage issue after unload
drm/amd/display: Skip on writeback when it's not applicable
drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
...
|
|
As Mark explains ksft_min_kernel_version() can't be compiled with nolibc,
it doesn't implement uname().
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240412123536.GA32444@redhat.com
Closes: https://lore.kernel.org/all/f0523b3a-ea08-4615-b0fb-5b504a2d39df@sirena.org.uk/
|
|
While monitoring the throttle time of IO from iocost, it's found that
such time is always zero after the io_schedule() from ioc_rqos_throttle,
for example, with the following debug patch:
+ printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
while (true) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (wait.committed)
break;
io_schedule();
}
+ printk("%s-%d: %s exit %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
It can be observerd that blk_time_get_ns() always return the same time:
[ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.272587] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.472690] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.672656] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.872655] fio-1268: ioc_rqos_throttle exit 1067901962288
And I think the root cause is that 'PF_BLOCK_TS' is always cleared
by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts()
will never be called:
blk_time_get_ns
plug->cur_ktime = ktime_get_ns();
current->flags |= PF_BLOCK_TS;
io_schedule:
io_schedule_prepare
blk_flush_plug
__blk_flush_plug
/* the flag is cleared, while time is not */
current->flags &= ~PF_BLOCK_TS;
schedule
sched_update_worker
/* the flag is not set, hence plug->cur_ktime is not cleared */
if (tsk->flags & PF_BLOCK_TS)
blk_plug_invalidate_ts()
blk_time_get_ns
/* got the time stashed before schedule */
return plug->cur_ktime;
Fix the problem by clearing cached time in __blk_flush_plug().
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add traces when queueing and delivering fake IRBs. These are significant
events that might have an impact on device driver processing and are
therefore relevant for problem analysis.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
A race condition exists in ccw_device_set_online() that can cause the
online process to fail, leaving the affected device in an inconsistent
state. As a result, subsequent attempts to set that device online fail
with return code ENODEV.
The problem occurs when a path verification request arrives after
a wait for final device state completed, but before the result state
is evaluated.
Fix this by ensuring that the CCW-device lock is held between
determining final state and checking result state.
Note that since:
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
path verification requests are much more likely to occur during boot,
resulting in an increased chance of this race condition occurring.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
A deferred condition code 1 response indicates that I/O was not started
and should be retried. The current QDIO implementation handles a cc1
response as I/O error, resulting in a failed QDIO setup. This can happen
for example when a path verification request arrives at the same time
as QDIO setup I/O is started.
Fix this by retrying the QDIO setup I/O when a cc1 response is received.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred cc1 responses are much more likely to occur. See the commit
message of the latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
|
|
__noreturn
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()"), clang warns:
tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here
401 | return major > min_major || (major == min_major && minor >= min_minor);
| ^~~~~
tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning
395 | unsigned int major, minor;
| ^
| = 0
This is a false positive because if uname() fails, ksft_exit_fail_msg()
will be called, which unconditionally calls exit(), a noreturn function.
However, clang does not know that ksft_exit_fail_msg() will call exit() at
the point in the pipeline that the warning is emitted because inlining has
not occurred, so it assumes control flow will resume normally after
ksft_exit_fail_msg() is called.
Make it clear to clang that all of the functions that call exit()
unconditionally in kselftest.h are noreturn transitively by marking them
explicitly with '__attribute__((__noreturn__))', which clears up the
warning above and any future warnings that may appear for the same reason.
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org
Closes: https://lore.kernel.org/all/20240410232637.4135564-2-jstultz@google.com/
|
|
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 24-04-11
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patches #1 and #2 add missing rcu read side lock when iterating over
expression and object type list which could race with module removal.
Patch #3 prevents promisc packet from visiting the bridge/input hook
to amend a recent fix to address conntrack confirmation race
in br_netfilter and nf_conntrack_bridge.
Patch #4 adds and uses iterate decorator type to fetch the current
pipapo set backend datastructure view when netlink dumps the
set elements.
Patch #5 fixes removal of duplicate elements in the pipapo set backend.
Patch #6 flowtable validates pppoe header before accessing it.
Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup
fails and pppoe packets follow classic path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Louis Peens says:
====================
nfp: series of minor driver improvements
This short series bundles now only includes a small update to add a
board part number to devlink. Previously some dim patches also formed
part of this series, these were dropped in v5.
Patch1: Add new define for devlink string "board.part_number"
Patch2: Make use of this field in the nfp driver
Changes since V4:
- Dropped the dim patches, as there is a more significant rework in
progress to make it more flexible, as mentioned in the V4 review:
https://lore.kernel.org/all/1712547870-112976-2-git-send-email-hengqi@linux.alibaba.com/
- Updated the devlink description of 'board.part_number'
Changes since V3:
- Fixed: Documentation/networking/devlink/devlink-info.rst:150:
WARNING: Title underline too short.
Changes since V2:
- After some discussion on the previous series it was agreed that only
the "board.part_number" field makes sense in the common code. The
"board.model" field which was moved to devlink common code in V1 is
now kept in the driver. The field is specific to the nfp driver,
exposing the codename of the board.
- In summary, add "board.part_number" to devlink, and populate it
in the the nfp driver.
Changes since V1:
- Move nfp local defines to devlink common code as it is quite generic.
- Add new 'dim' profile instead of using driver local overrides, as this
allows use of the 'dim' helpers.
- This expanded 2 patches to 4, as the common code changes are split
into seperate patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Newer NIC will introduce a new part number, now add it
into devlink device info.
This patch also updates the information of "board.id" in
nfp.rst to match the devlink-info.rst.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add definition and documentation for the new generic
info "board.part_number".
The new one is for part number specific use, and board.id
is modified to match the documentation in devlink-info.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use consistent log severity (pr_warn) to log all messages in SNP
enable path.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fixes: 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10689
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240407011429.136282-1-baolu.lu@linux.intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The page request queue is per IOMMU, its allocation should be made
NUMA-aware for performance reasons.
Fixes: a222a7f0bb6c ("iommu/vt-d: Implement page request handling")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240403214007.985600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit "iommu/vt-d: Add IOMMU perfmon support" introduce IOMMU
PMU feature, but use the wrong config when set pasid filter.
Fixes: 7232ab8b89e9 ("iommu/vt-d: Add IOMMU perfmon support")
Signed-off-by: Xuchun Shang <xuchun.shang@linux.alibaba.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240401060753.3321318-1-xuchun.shang@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The topology rework missed that early_init_amd() tries to re-enable the
Topology Extensions when the BIOS disabled them.
The new parser is invoked before early_init_amd() so the re-enable attempt
happens too late.
Move it into the AMD specific topology parser code where it belongs.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/878r1j260l.ffs@tglx
|
|
A system with NODEID_MSR was reported to crash during early boot without
any output.
The reason is that the union which is used for accessing the bitfields in
the MSR is written wrongly and the resulting executable code accesses the
wrong part of the MSR data.
As a consequence a later division by that value results in 0 and that
result is used for another division as divisor, which obviously does not
work well.
The magic world of C, unions and bitfields:
union {
u64 bita : 3,
bitb : 3;
u64 all;
} x;
x.all = foo();
a = x.bita;
b = x.bitb;
results in the effective executable code of:
a = b = x.bita;
because bita and bitb are treated as union members and therefore both end
up at bit offset 0.
Wrapping the bitfield into an anonymous struct:
union {
struct {
u64 bita : 3,
bitb : 3;
};
u64 all;
} x;
works like expected.
Rework the NODEID_MSR union in exactly that way to cure the problem.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20240410194311.596282919@linutronix.de
Closes: https://lore.kernel.org/all/20240322175210.124416-1-laura.nao@collabora.com/
|
|
CPUID 0x80000008 ECX.cpu_nthreads describes the number of threads in the
package. The parser uses this value to initialize the SMT domain level.
That's wrong because cpu_nthreads does not describe the number of threads
per physical core. So this needs to set the CORE domain level and let the
later parsers set the SMT shift if available.
Preset the SMT domain level with the assumption of one thread per core,
which is correct ifrt here are no other CPUID leafs to parse, and propagate
cpu_nthreads and the core level APIC bitwidth into the CORE domain.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20240410194311.535206450@linutronix.de
|
|
For consistency with the other CONFIG_MITIGATION_* options, replace the
CONFIG_SPECTRE_BHI_{ON,OFF} options with a single
CONFIG_MITIGATION_SPECTRE_BHI option.
[ mingo: Fix ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/3833812ea63e7fdbe36bf8b932e63f70d18e2a2a.1712813475.git.jpoimboe@kernel.org
|
|
Unlike most other mitigations' "auto" options, spectre_bhi=auto only
mitigates newer systems, which is confusing and not particularly useful.
Remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/412e9dc87971b622bbbaf64740ebc1f140bff343.1712813475.git.jpoimboe@kernel.org
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
DTE[Mode]=0 is not supported when SNP is enabled in the host. That means
to support SNP, IOMMU must be configured with V1 page table (See IOMMU
spec [1] for the details). If user passes kernel command line to configure
IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP
as the user asked by not forcing the page table to v1.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"),
we noticed an application-level timeout due to reduced throughput.
Before the commit, for a client that sets SO_RCVBUF to 65k, it takes
around 22 seconds to transfer 10M data. After the commit, it takes 40
seconds. Because our application has a 30-second timeout, this
regression broke the application.
The reason that it takes longer to transfer data is that
tp->scaling_ratio is initialized to a value that results in ~0.25 of
rcvbuf. In our case, SO_RCVBUF is set to 65536 by the application, which
translates to 2 * 65536 = 131,072 bytes in rcvbuf and hence a ~28k
initial receive window.
Later, even though the scaling_ratio is updated to a more accurate
skb->len/skb->truesize, which is ~0.66 in our environment, the window
stays at ~0.25 * rcvbuf. This is because tp->window_clamp does not
change together with the tp->scaling_ratio update when autotuning is
disabled due to SO_RCVBUF. As a result, the window size is capped at the
initial window_clamp, which is also ~0.25 * rcvbuf, and never grows
bigger.
Most modern applications let the kernel do autotuning, and benefit from
the increased scaling_ratio. But there are applications such as kafka
that has a default setting of SO_RCVBUF=64k.
This patch increases the initial scaling_ratio from ~25% to 50% in order
to make it backward compatible with the original default
sysctl_tcp_adv_win_scale for applications setting SO_RCVBUF.
Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Hechao Li <hli@netflix.com>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240402215405.432863-1-hli@netflix.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LOCKDEP detector reported below warning:
----------------------------------------
[ 23.796949] ========================================================
[ 23.796950] WARNING: possible irq lock inversion dependency detected
[ 23.796952] 6.8.0fix+ #811 Not tainted
[ 23.796954] --------------------------------------------------------
[ 23.796954] kworker/0:1/8 just changed the state of lock:
[ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50
[ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 23.796970] (pd_bitmap_lock){+.+.}-{3:3}
[ 23.796972]
and interrupts could create inverse lock ordering between them.
[ 23.796973]
other info that might help us debug this:
[ 23.796974] Chain exists of:
&domain->lock --> &dev_data->lock --> pd_bitmap_lock
[ 23.796980] Possible interrupt unsafe locking scenario:
[ 23.796981] CPU0 CPU1
[ 23.796982] ---- ----
[ 23.796983] lock(pd_bitmap_lock);
[ 23.796985] local_irq_disable();
[ 23.796985] lock(&domain->lock);
[ 23.796988] lock(&dev_data->lock);
[ 23.796990] <Interrupt>
[ 23.796991] lock(&domain->lock);
Fix this issue by disabling interrupt when acquiring pd_bitmap_lock.
Note that this is temporary fix. We have a plan to replace custom bitmap
allocator with IDA allocator.
Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
