summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-29drm/amd/display: Add debug option for exiting idle optimizations on cursor ↵Brandon Syu
updates [Description] - Have option to exit idle opt on cursor updates for debug and optimizations purposes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Brandon Syu<Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Change EDID fallback conditionIlya Bakoulin
[Why] Partially valid EDIDs on MST sinks are treated the same way as broken EDIDs or read failures and result in a fallback EDID being used instead. [How] If edid_status is EDID_PARTIAL_VALID, prefer to use the valid EDID blocks instead of using a fallback EDID. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Do DIO FIFO enable after DP video stream enableNicholas Kazlauskas
[Why] Avoids a race condition where DIO FIFO can underflow due to no incoming data available. [How] Shift the FIFO enable below stream enable. Make sure fullness level is written before the DIO reset takes place and that we're not doing it twice. Reviewed-by: Syed Hassan <Syed.Hassan@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Remove interface for periodic interrupt 1Aric Cyr
[why] Only a single VLINE interrupt is available so interface should not expose the second one which is used by DMU firmware. [how] Remove references to periodic_interrupt1 and VLINE1 from DC interfaces. Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Update DCN32 to use new SR latenciesAlvin Lee
[Description] Update to new SR latencies for DCN32 Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Avoid avoid unnecessary pixel rate divider programmingTaimur Hassan
[Why] Programming pixel rate divider when FIFO is enabled can cause FIFO error. [How] Skip divider programming when divider values are the same to prevent FIFO error. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdkfd: fix dropped interrupt in kfd_int_process_v11Graham Sider
Shader wave interrupts were getting dropped in event_interrupt_wq_v11 if the PRIV bit was set to 1. This would often lead to a hang. Until debugger logic is upstreamed, expand comment to stop early return. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: pass queue size and is_aql_queue to MESGraham Sider
Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also re-use gds_size for the queue size (unused for KFD). MES requires the queue size in order to compute the actual wptr offset within the queue RB since it increases monotonically for AQL queues. v2: Make is_aql_queue assign clearer Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdkfd: fix MQD init for GFX11 in init_mqdGraham Sider
Set remaining compute_static_thread_mgmt_se* accordingly. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Enable SA software trap.David Belanger
Enables support for software trap for MES >= 4. Adapted from implementation from Jay Cornwall. v2: Add IP version check in conditions. v3: Remove debugger code changes. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/amdgpu: Add missing XGMI hive registers for mmhub 9.4.1Tom St Denis
These are used by umr to sort the hive nodes since the kernel initializes the nodes in order of bus enumeration not XGMI hive enumeration. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/vcn: update vcn4 fw shared data structureRuijing Dong
update VF_RB_SETUP_FLAG, add SMU_DPM_INTERFACE_FLAG, and corresponding change in VCN4. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma6: use common function to init sdma fwLikun Gao
Use common function to init sdma v6 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support sdma struct v2 fw initLikun Gao
Support SDMA firmware init on common function for sdma v2 struct. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma5: use common function to init sdma fwLikun Gao
Use common function to init sdma v5 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma4: use common function to init sdma fwLikun Gao
Use common function to init sdma v4 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init SDMA microcodeLikun Gao
Add an common function to init SDMA related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: use common function to init cp fwLikun Gao
Use common function to init gfx v11 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: use common function to init CP fwLikun Gao
Use common function to init gfx v10 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx9: use common function to init cp fwLikun Gao
Use common function to init gfx v9 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init CP microcodeLikun Gao
Add an common function to init CP related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: use adverse selection for dpm features unsupported by driverEvan Quan
It's vbios and pmfw instead of driver who decide whether some dpm features is supported or not. Driver just de-selects those features which are not permitted on user's request. Thus, we use adverse selects model. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: enable gfxoff feature for SMU 13.0.0Evan Quan
The feature is ready with latest 78.58.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: avoid gfx register accessing during gfxoffEvan Quan
Make sure gfxoff is disabled before gfx register accessing. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drivers/amd/pm: check the return value of amdgpu_bo_kmapLi Zhong
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the error check and propagate the error. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Li Zhong <floridsleeves@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Use simplified API for p2p dist calcLijo Lazar
Use the simpified API that calculates distance between two devices. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Disable verbose for p2p dist calcLijo Lazar
Disable verbose while getting p2p distance. With verbose, it shows warning if ACS redirect is set between the devices. Adds noise to dmesg logs when a few GPU devices are on the same platform. Example log: amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0) amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter: pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fixed ras warning when uninstalling amdgpuYiPeng Chai
For the asic using smu v13_0_2, there is the following warning when uninstalling amdgpu: amdgpu: ras disable gfx failed poison:1 ret:-22. [Why]: For the asic using smu v13_0_2, the psp .suspend and mode1reset is called before amdgpu_ras_pre_fini during amdgpu uninstall, it has disabled all ras features and reset the psp. Since the psp is reset, calling amdgpu_ras_disable_all_features in amdgpu_ras_pre_fini to disable ras features will fail. [How]: If all ras features are disabled, amdgpu_ras_disable_all_features will not be called to disable all ras features again. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang
switch to common helper to initialize rlc firmware for gfx11 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang
switch to common helper to initialize rlc firmware for gfx10 v2: squash in size validation fix (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29quota: Add more checking after reading from quota fileZhihao Cheng
It would be better to do more sanity checking (eg. dqdh_entries, block no.) for the content read from quota file, which can prevent corrupting the quota file. Link: https://lore.kernel.org/r/20220923134555.2623931-4-chengzhihao1@huawei.com Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2022-09-29quota: Replace all block number checking with helper functionZhihao Cheng
Cleanup all block checking places, replace them with helper function do_check_range(). Link: https://lore.kernel.org/r/20220923134555.2623931-3-chengzhihao1@huawei.com Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2022-09-29quota: Check next/prev free block number after reading from quota fileZhihao Cheng
Following process: Init: v2_read_file_info: <3> dqi_free_blk 0 dqi_free_entry 5 dqi_blks 6 Step 1. chown bin f_a -> dquot_acquire -> v2_write_dquot: qtree_write_dquot do_insert_tree find_free_dqentry get_free_dqblk write_blk(info->dqi_blocks) // info->dqi_blocks = 6, failure. The content in physical block (corresponding to blk 6) is random. Step 2. chown root f_a -> dquot_transfer -> dqput_all -> dqput -> ext4_release_dquot -> v2_release_dquot -> qtree_delete_dquot: dquot_release remove_tree free_dqentry put_free_dqblk(6) info->dqi_free_blk = blk // info->dqi_free_blk = 6 Step 3. drop cache (buffer head for block 6 is released) Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot: qtree_write_dquot do_insert_tree find_free_dqentry get_free_dqblk dh = (struct qt_disk_dqdbheader *)buf blk = info->dqi_free_blk // 6 ret = read_blk(info, blk, buf) // The content of buf is random info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free) // random blk Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer: dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire -> commit_dqblk -> v2_write_dquot -> dq_insert_tree: do_insert_tree find_free_dqentry get_free_dqblk blk = info->dqi_free_blk // If blk < 0 and blk is not an error code, it will be returned as dquot transfer_to[USRQUOTA] = dquot // A random negative value __dquot_transfer(transfer_to) dquot_add_inodes(transfer_to[cnt]) spin_lock(&dquot->dq_dqb_lock) // page fault , which will lead to kernel page fault: Quota error (device sda): qtree_write_dquot: Error -8000 occurred while creating quota BUG: unable to handle page fault for address: ffffffffffffe120 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:_raw_spin_lock+0x3a/0x90 Call Trace: dquot_add_inodes+0x28/0x270 __dquot_transfer+0x377/0x840 dquot_transfer+0xde/0x540 ext4_setattr+0x405/0x14d0 notify_change+0x68e/0x9f0 chown_common+0x300/0x430 __x64_sys_fchownat+0x29/0x40 In order to avoid accessing invalid quota memory address, this patch adds block number checking of next/prev free block read from quota file. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216372 Fixes: 1da177e4c3f4152 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220923134555.2623931-2-chengzhihao1@huawei.com Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
2022-09-29printk: Mark __printk percpu data ready __ro_after_initThomas Gleixner
This variable cannot change post boot. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-6-john.ogness@linutronix.de
2022-09-29printk: Remove bogus comment vs. boot consolesThomas Gleixner
The comment about unregistering boot consoles is just not matching the reality. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-5-john.ogness@linutronix.de
2022-09-29printk: Remove write only variable nr_ext_console_driversThomas Gleixner
Commit a699449bb13b ("printk: refactor and rework printing logic") removed the need for @nr_ext_console_drivers. Remove the unneeded variable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-4-john.ogness@linutronix.de
2022-09-29printk: Declare log_wait properlyThomas Gleixner
kernel/printk/printk.c:365:1: warning: symbol 'log_wait' was not declared. Should it be static? Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-3-john.ogness@linutronix.de
2022-09-29printk: Make pr_flush() staticThomas Gleixner
No user outside the printk code and no reason to export this. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220924000454.3319186-2-john.ogness@linutronix.de
2022-09-29io_uring/net: fix fast_iov assignment in io_setup_async_msg()Stefan Metzmacher
I hit a very bad problem during my tests of SENDMSG_ZC. BUG(); in first_iovec_segment() triggered very easily. The problem was io_setup_async_msg() in the partial retry case, which seems to happen more often with _ZC. iov_iter_iovec_advance() may change i->iov in order to have i->iov_offset being only relative to the first element. Which means kmsg->msg.msg_iter.iov is no longer the same as kmsg->fast_iov. But this would rewind the copy to be the start of async_msg->fast_iov, which means the internal state of sync_msg->msg.msg_iter is inconsitent. I tested with 5 vectors with length like this 4, 0, 64, 20, 8388608 and got a short writes with: - ret=2675244 min_ret=8388692 => remaining 5713448 sr->done_io=2675244 - ret=-EAGAIN => io_uring_poll_arm - ret=4911225 min_ret=5713448 => remaining 802223 sr->done_io=7586469 - ret=-EAGAIN => io_uring_poll_arm - ret=802223 min_ret=802223 => res=8388692 While this was easily triggered with SENDMSG_ZC (queued for 6.1), it was a potential problem starting with 7ba89d2af17aa879dda30f5d5d3f152e587fc551 in 5.18 for IORING_OP_RECVMSG. And also with 4c3c09439c08b03d9503df0ca4c7619c5842892e in 5.19 for IORING_OP_SENDMSG. However 257e84a5377fbbc336ff563833a8712619acce56 introduced the critical code into io_setup_async_msg() in 5.11. Fixes: 7ba89d2af17aa ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly") Fixes: 257e84a5377fb ("io_uring: refactor sendmsg/recvmsg iov managing") Cc: stable@vger.kernel.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b2e7be246e2fb173520862b0c7098e55767567a2.1664436949.git.metze@samba.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29perf tests record: Fail the test if the 'errs' counter is not zeroArnaldo Carvalho de Melo
We were just checking for the 'err' variable, when we should really see if there was some of the many checked errors that don't stop the test right away. Detected with clang 15.0.0: 44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37) tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable] int err = -1, errs = 0, i, wakeups = 0; ^ 1 error generated. The patch introducing this 'perf test' entry had that check: + return (err < 0 || errs > 0) ? -1 : 0; But at some point we lost that: - return (err < 0 || errs > 0) ? -1 : 0; + if (err == -EACCES) + return TEST_SKIP; + if (err < 0) + return TEST_FAIL; + return TEST_OK Put it back. Fixes: 2cf88f4614c996e5 ("perf test: Use skip in PERF_RECORD_*") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YzR0n5QhsH9VyYB0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29perf test: Fix test case 87 ("perf record tests") for hybrid systemsZhengjun Xing
The test case 87 ("perf record tests") failed on hybrid systems,the event "cpu/br_inst_retired.near_call/p" is only for non-hybrid system. Correct the test event to support both non-hybrid and hybrid systems. Before: # ./perf test 87 87: perf record tests : FAILED! After: # ./perf test 87 87: perf record tests : Ok Fixes: 24f378e66021f559 ("perf test: Add basic perf record tests") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220927051513.3768717-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-29Merge tag 'ata-6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "Three late patches to fix problems discovered recently: - Add a horkage to disable link power management by default for the Pioneer BDR-207M and BDR-205 DVD drives (from Niklas) - Two patches to fix setting the maximum queue depth of libsas owned ATA devices (from me)" * tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Fix device queue depth control ata: libata-scsi: Fix initialization of device queue depth libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
2022-09-29Merge tag 'loongarch-fixes-6.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some trivial fixes and cleanup" * tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Clean up loongson3_smp_ops declaration LoongArch: Fix and cleanup csr_era handling in do_ri() LoongArch: Align the address of kernel_entry to 4KB
2022-09-29lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.Sebastian Andrzej Siewior
The printk code invokes vnsprintf in order to compute the complete string before adding it into its buffer. This happens in an IRQ-off region which leads to a warning on PREEMPT_RT in the random code if the format strings contains a %p for pointer printing. This happens because the random core acquires locks which become sleeping locks on PREEMPT_RT which must not be acquired with disabled interrupts and or preemption disabled. By default the pointers are hashed which requires a random value on the first invocation (either by printk or another user which comes first. One could argue that there is no need for printk to disable interrupts during the vsprintf() invocation which would fix the just mentioned problem. However printk itself can be invoked in a context with disabled interrupts which would lead to the very same problem. Move the initialization of ptr_key into a worker and schedule it from subsys_initcall(). This happens early but after the workqueue subsystem is ready. Use get_random_bytes() to retrieve the random value if the RNG core is ready, otherwise schedule a worker in two seconds and try again. Another advantage is that it removes a lock from the vsprintf() code path. It prevents a possible deadlock when printk("%p", ptr) is called under the lock taken in get_random_bytes(). Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Petr Mladek <pmladek@suse.com> [pmladek@suse.com: Added a note about the it prevented a possible deadlock in printk().] Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220927104912.622645-3-bigeasy@linutronix.de
2022-09-29lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().Sebastian Andrzej Siewior
Using static_branch_likely() to signal that ptr_key has been filled is a bit much given that it is not a fast path. Replace static_branch_likely() with bool for condition and a memory barrier for ptr_key. Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220927104912.622645-2-bigeasy@linutronix.de
2022-09-29net: cpmac: Add __init/__exit annotations to module init/exit funcsruanjinjie
Add __init/__exit annotations to module init/exit funcs Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220928031708.89120-1-ruanjinjie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"Colin Ian King
There are some spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220928220417.66799-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29perf/x86/amd/lbr: Adjust LBR regardless of filteringStephane Eranian
In case of fused compare and taken branch instructions, the AMD LBR points to the compare instruction instead of the branch. Users of LBR usually expects the from address to point to a branch instruction. The kernel has code to adjust the from address via get_branch_type_fused(). However this correction is only applied when a branch filter is applied. That means that if no filter is present, the quality of the data is lower. Fix the problem by applying the adjustment regardless of the filter setting, bringing the AMD LBR to the same level as other LBR implementations. Fixes: 245268c19f70 ("perf/x86/amd/lbr: Use fusion-aware branch classifier") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/r/20220928184043.408364-3-eranian@google.com
2022-09-29perf/x86/utils: Fix uninitialized var in get_branch_type()Stephane Eranian
offset is passed as a pointer and on certain call path is not set by the function. If the caller does not re-initialize offset between calls, value could be inherited between calls. Prevent this by initializing offset on each call. This impacts the code in amd_pmu_lbr_filter() which does: for(i=0; ...) { ret = get_branch_type_fused(..., &offset); if (offset) lbr_entries[i].from += offset; } Fixes: df3e9612f758 ("perf/x86: Make branch classifier fusion-aware") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/r/20220928184043.408364-2-eranian@google.com
2022-09-29perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header fileRavi Bangoria
PERF_MEM_SNOOPX_PEER is defined only in tools uapi header. Although it's used only by perf tool, not defining it in kernel header can create problems in future. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220928095805.596-8-ravi.bangoria@amd.com
generated by cgit (git 2.34.1) at 2025-09-14 22:32:28 +0000