| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/misc:
: Miscellaneous patches
arm64/kprobe: Optimize the performance of patching single-step slot
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64: support huge vmalloc mappings
arm64: spectre: increase parameters that can be used to turn off bhb mitigation individually
arm64: run softirqs on the per-CPU IRQ stack
arm64: compat: Implement misalignment fixups for multiword loads
|
|
* for-next/alternatives:
: Alternatives (code patching) improvements
arm64: fix the build with binutils 2.27
arm64: avoid BUILD_BUG_ON() in alternative-macros
arm64: alternatives: add shared NOP callback
arm64: alternatives: add alternative_has_feature_*()
arm64: alternatives: have callbacks take a cap
arm64: alternatives: make alt_region const
arm64: alternatives: hoist print out of __apply_alternatives()
arm64: alternatives: proton-pack: prepare for cap changes
arm64: alternatives: kvm: prepare for cap changes
arm64: cpufeature: make cpus_have_cap() noinstr-safe
|
|
* for-next/kselftest: (28 commits)
: Kselftest updates for arm64
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
kselftest/arm64: Fix typo in hwcap check
kselftest/arm64: Add hwcap test for RNG
kselftest/arm64: Add SVE 2 to the tested hwcaps
kselftest/arm64: Add missing newline in hwcap output
kselftest/arm64: Fix spelling misakes of signal names
kselftest/arm64: Enforce actual ABI for SVE syscalls
kselftest/arm64: Correct buffer allocation for SVE Z registers
kselftest/arm64: Include larger SVE and SME VLs in signal tests
kselftest/arm64: Allow larger buffers in get_signal_context()
kselftest/arm64: Preserve any EXTRA_CONTEXT in handle_signal_copyctx()
kselftest/arm64: Validate contents of EXTRA_CONTEXT blocks
kselftest/arm64: Only validate each signal context once
kselftest/arm64: Remove unneeded protype for validate_extra_context()
kselftest/arm64: Fix validation of EXTRA_CONTEXT signal context location
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
kselftest/arm64: Validate signal ucontext in place
...
|
|
'for-next/gettimeofday', 'for-next/stacktrace', 'for-next/atomics', 'for-next/el1-exceptions', 'for-next/a510-erratum-2658417', 'for-next/defconfig', 'for-next/tpidr2_el0' and 'for-next/ftrace', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
arm64/sve: Add Perf extensions documentation
perf: arm64: Add SVE vector granule register to user regs
MAINTAINERS: add maintainers for Alibaba' T-Head PMU driver
drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC
docs: perf: Add description for Alibaba's T-Head PMU driver
* for-next/doc:
: Documentation/arm64 updates
arm64/sve: Document our actual ABI for clearing registers on syscall
* for-next/sve:
: SVE updates
arm64/sysreg: Add hwcap for SVE EBF16
* for-next/sysreg: (35 commits)
: arm64 system registers generation (more conversions)
arm64/sysreg: Fix a few missed conversions
arm64/sysreg: Convert ID_AA64AFRn_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64FDR0_EL1 to automatic generation
arm64/sysreg: Use feature numbering for PMU and SPE revisions
arm64/sysreg: Add _EL1 into ID_AA64DFR0_EL1 definition names
arm64/sysreg: Align field names in ID_AA64DFR0_EL1 with architecture
arm64/sysreg: Add defintion for ALLINT
arm64/sysreg: Convert SCXTNUM_EL1 to automatic generation
arm64/sysreg: Convert TIPDR_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64PFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64MMFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64MMFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_AA64MMFR0_EL1 to automatic generation
arm64/sysreg: Convert HCRX_EL2 to automatic generation
arm64/sysreg: Standardise naming of ID_AA64PFR1_EL1 SME enumeration
arm64/sysreg: Standardise naming of ID_AA64PFR1_EL1 BTI enumeration
arm64/sysreg: Standardise naming of ID_AA64PFR1_EL1 fractional version fields
arm64/sysreg: Standardise naming for MTE feature enumeration
...
* for-next/gettimeofday:
: Use self-synchronising counter access in gettimeofday() (if FEAT_ECV)
arm64: vdso: use SYS_CNTVCTSS_EL0 for gettimeofday
arm64: alternative: patch alternatives in the vDSO
arm64: module: move find_section to header
* for-next/stacktrace:
: arm64 stacktrace cleanups and improvements
arm64: stacktrace: track hyp stacks in unwinder's address space
arm64: stacktrace: track all stack boundaries explicitly
arm64: stacktrace: remove stack type from fp translator
arm64: stacktrace: rework stack boundary discovery
arm64: stacktrace: add stackinfo_on_stack() helper
arm64: stacktrace: move SDEI stack helpers to stacktrace code
arm64: stacktrace: rename unwind_next_common() -> unwind_next_frame_record()
arm64: stacktrace: simplify unwind_next_common()
arm64: stacktrace: fix kerneldoc comments
* for-next/atomics:
: arm64 atomics improvements
arm64: atomic: always inline the assembly
arm64: atomics: remove LL/SC trampolines
* for-next/el1-exceptions:
: Improve the reporting of EL1 exceptions
arm64: rework BTI exception handling
arm64: rework FPAC exception handling
arm64: consistently pass ESR_ELx to die()
arm64: die(): pass 'err' as long
arm64: report EL1 UNDEFs better
* for-next/a510-erratum-2658417:
: Cortex-A510: 2658417: remove BF16 support due to incorrect result
arm64: errata: remove BF16 HWCAP due to incorrect result on Cortex-A510
arm64: cpufeature: Expose get_arm64_ftr_reg() outside cpufeature.c
arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space
* for-next/defconfig:
: arm64 defconfig updates
arm64: defconfig: Add Coresight as module
arm64: Enable docker support in defconfig
arm64: defconfig: Enable memory hotplug and hotremove config
arm64: configs: Enable all PMUs provided by Arm
* for-next/tpidr2_el0:
: arm64 ptrace() support for TPIDR2_EL0
kselftest/arm64: Add coverage of TPIDR2_EL0 ptrace interface
arm64/ptrace: Support access to TPIDR2_EL0
arm64/ptrace: Document extension of NT_ARM_TLS to cover TPIDR2_EL0
kselftest/arm64: Add test coverage for NT_ARM_TLS
* for-next/ftrace:
: arm64 ftraces updates/fixes
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
|
|
Single-step slot would not be used until kprobe is enabled, that means
no race condition occurs on it under SMP, hence it is safe to pacth ss
slot without stopping machine.
Since I and D caches are coherent within single-step slot from
aarch64_insn_patch_text_nosync(), hence no need to do it again via
flush_icache_range().
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20220927022435.129965-4-liaochang1@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This flag could be removed since we now have API to query bclk
fequency setting in the topology. The dai link structure itself also
provides DAI format information instead of figuring it out with fs
number.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913074906.926774-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support TDM format for NAU88L25.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220930072804.2524352-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Zhang Qilong <zhangqilong3@huawei.com>:
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of probe.
Zhang Qilong (4):
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
sound/soc/codecs/mt6660.c | 8 ++++++--
sound/soc/codecs/wm5102.c | 6 +++---
sound/soc/codecs/wm5110.c | 6 +++---
sound/soc/codecs/wm8997.c | 6 +++---
4 files changed, 15 insertions(+), 11 deletions(-)
--
2.25.1
|
|
Sabrina Dubroca says:
============
This series completes extack support for state creation.
============
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The scatterwalk_aligned() are no longer used since removing blkcipher
and ablkcipher support, all use of it has been removed since
commit d63007eb954e ("crypto: ablkcipher - remove deprecated
and unused ablkcipher support"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The aead_enqueue_request, aead_dequeue_request and aead_get_backlog
are no longer used since commit 04a4616e6a21 ("crypto: omap-aes-gcm
- convert to use crypto engine"), their functinoality has been
replaced by crypto engine, so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The crypto_ahash_alg_name(tfm) can obtain the name for cipher in
include/crypto/hash.h, but now the function is not in use, so we
use it to simplify the code, and optimize the code structure.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Start the hwrng kthread even if the hwrng source has a quality setting
of zero. Then, every crng reseed interval, one batch of data from this
zero-quality hwrng source will be mixed into the CRNG pool.
This patch is based on the assumption that data from a hwrng source
will not actively harm the CRNG state. Instead, many hwrng sources
(such as TPM devices), even though they are assigend a quality level of
zero, actually provide some entropy, which is good enough to mix into
the CRNG pool every once in a while.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return the value directly instead of storing it in another redundant
variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
adf_copy_key_value_data() copies data from userland to kernel, based on
a linked link provided by userland. If userland provides a circular
list (or just a very long one) then it would drive a long loop where
allocation occurs in every loop. This could lead to low memory conditions.
Adding a limit to stop endless loop.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Co-developed-by: Ciunas Bennett <ciunas.bennett@intel.com>
Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return the value otx2_cpt_send_mbox_msg() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return the value ccp_crypto_enqueue_request() directly instead of storing
it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The platform_get_irq() function returns negative on error and
positive non-zero values on success. It never returns zero, but if it
did then treat that as a success.
Also remove redundant dev_err() print as platform_get_irq() already
prints an error.
Fixes: 108713a713c7 ("crypto: aspeed - Add HACE hash driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix memory-leak for virtio-crypto akcipher request, this problem is
introduced by 59ca6c93387d3(virtio-crypto: implement RSA algorithm).
The leak can be reproduced and tested with the following script
inside virtual machine:
#!/bin/bash
LOOP_TIMES=10000
# required module: pkcs8_key_parser, virtio_crypto
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
modprobe virtio_crypto # if CONFIG_CRYPTO_DEV_VIRTIO=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=230
# generate private key and self-signed cert
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem \
-outform der -out cert.der \
-subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=always.com/emailAddress=yy@always.com"
# convert private key from pem to der
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
# add key
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
# query key
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
# here we only run pkey_encrypt becasuse it is the fastest interface
function bench_pub() {
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
}
# do bench_pub in loop to obtain the memory leak
for (( i = 0; i < ${LOOP_TIMES}; ++i )); do
bench_pub
done
Signed-off-by: lei he <helei.sig11@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow.
Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "code_length * 2" can overflow. The round_up(ucode_size, 16) +
sizeof() expression can overflow too. Prevent these overflows.
Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix build error within the following configs setting:
- CONFIG_CRYPTO_DEV_ASPEED=y
- CONFIG_CRYPTO_DEV_ASPEED_HACE_HASH is not set
- CONFIG_CRYPTO_DEV_ASPEED_HACE_CRYPTO is not set
Error messages:
make[4]: *** No rule to make target 'drivers/crypto/aspeed/aspeed_crypto.o'
, needed by 'drivers/crypto/aspeed/built-in.a'.
make[4]: Target '__build' not remade because of errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
submit_bh/submit_bh_wbc are non-blocking functions which just submit
the bio and return. The caller of submit_bh/submit_bh_wbc needs to wait
on buffer till I/O completion and then check buffer head's b_state field
to know if there was any I/O error.
Hence there is no need for these functions to have any return type.
Even now they always returns 0. Hence drop the return value and make
their return type as void to avoid any confusion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/cb66ef823374cdd94d2d03083ce13de844fffd41.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
submit_bh always returns 0. This patch drops the useless return value of
submit_bh from __sync_dirty_buffer(). Once all of submit_bh callers are
cleaned up, we can make it's return type as void.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a98a6ddfac68f73d684c2724952e825bc1f4d238.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
submit_bh always returns 0. This patch drops the useless return value of
submit_bh from ntfs_submit_bh_for_read(). Once all of submit_bh callers are
cleaned up, we can make it's return type as void.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d82eb29e8dbc52fe13a7affef5c907ea4076aa31.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
submit_bh always returns 0. This patch cleans up 2 of it's caller
in jbd2 to drop submit_bh's useless return value.
Once all submit_bh callers are cleaned up, we can make it's return
type as void.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/e069c0539be0aec61abcdc6f6141982ec85d489d.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-28 (ice)
Arkadiusz implements a single pin initialization function, checking feature
bits, instead of having separate device functions and updates sub-device
IDs for recognizing E810T devices.
Martyna adds support for switchdev filters on VLAN priority field.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for VLAN priority filters in switchdev
ice: support features on new E810T variants
ice: Merge pin initialization of E810 and E810T adapters
====================
Link: https://lore.kernel.org/r/20220928203217.411078-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zbynek reports that alx trips an rtnl assertion on resume:
RTNL: assertion failed at net/core/dev.c (2891)
RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0
Call Trace:
<TASK>
__alx_open+0x230/0x570 [alx]
alx_resume+0x54/0x80 [alx]
? pci_legacy_resume+0x80/0x80
dpm_run_callback+0x4a/0x150
device_resume+0x8b/0x190
async_resume+0x19/0x30
async_run_entry_fn+0x30/0x130
process_one_work+0x1e5/0x3b0
indeed the driver does not hold rtnl_lock during its internal close
and re-open functions during suspend/resume. Note that this is not
a huge bug as the driver implements its own locking, and does not
implement changing the number of queues, but we need to silence
the splat.
Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Reported-and-tested-by: Zbynek Michl <zbynek.michl@gmail.com>
Reviewed-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220928181236.1053043-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following build errors:
arch/sparc/mm/srmmu.c: In function ‘smp_flush_page_for_dma’:
arch/sparc/mm/srmmu.c:1639:13: error: cast between incompatible function types from ‘void (*)(long unsigned int)’ to ‘void (*)(long unsigned int, long unsigned int, long unsigned int, long unsigned int, long unsigned int)’ [-Werror=cast-function-type]
1639 | xc1((smpfunc_t) local_ops->page_for_dma, page);
| ^
arch/sparc/mm/srmmu.c: In function ‘smp_flush_cache_mm’:
arch/sparc/mm/srmmu.c:1662:29: error: cast between incompatible function types from ‘void (*)(struct mm_struct *)’ to ‘void (*)(long unsigned int, long unsigned int, long unsigned int, long unsigned int, long unsigned int)’ [-Werror=cast-function-type]
1662 | xc1((smpfunc_t) local_ops->cache_mm, (unsigned long) mm);
|
[ ... ]
Compile-tested only.
Fixes: 552a23a0e5d0 ("Makefile: Enable -Wcast-function-type")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220830205854.1918026-1-bvanassche@acm.org
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1664364860-29153-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Add tc-taprio support for queueMaxSDU
The tc-taprio offload mode supported by the Felix DSA driver has
limitations surrounding its guard bands.
The initial discussion was at:
https://lore.kernel.org/netdev/c7618025da6723418c56a54fe4683bd7@walle.cc/
with the latest status being that we now have a vsc9959_tas_guard_bands_update()
method which makes a best-guess attempt at how much useful space to
reserve for packet scheduling in a taprio interval, and how much to
reserve for guard bands.
IEEE 802.1Q actually does offer a tunable variable (queueMaxSDU) which
can determine the max MTU supported per traffic class. In turn we can
determine the size we need for the guard bands, depending on the
queueMaxSDU. This way we can make the guard band of small taprio
intervals smaller than one full MTU worth of transmission time, if we
know that said traffic class will transport only smaller packets.
As discussed with Gerhard Engleder, the queueMaxSDU may also be useful
in limiting the latency on an endpoint, if some of the TX queues are
outside of the control of the Linux driver.
https://patchwork.kernel.org/project/netdevbpf/patch/20220914153303.1792444-11-vladimir.oltean@nxp.com/
Allow input of queueMaxSDU through netlink into tc-taprio, offload it to
the hardware I have access to (LS1028A), and (implicitly) deny
non-default values to everyone else. Kurt Kanzenbach has also kindly
tested and shared a patch to offload this to hellcreek.
v3 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220927234746.1823648-1-vladimir.oltean@nxp.com/
v2 at:
https://patchwork.kernel.org/project/netdevbpf/list/?series=679954&state=*
v1 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20220914153303.1792444-1-vladimir.oltean@nxp.com/
====================
Link: https://lore.kernel.org/r/20220928095204.2093716-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver currently sets the PTCMSDUR register statically to the max
MTU supported by the interface. Keep this logic if tc-taprio is absent
or if the max_sdu for a traffic class is 0, and follow the requested max
SDU size otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Port Time Gating Control Register (PTGCR) and Port Time Gating
Capability Register (PTGCAPR) have definitions in the driver which
aren't in line with the other registers. Rename these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The &priv->si->hw construct dereferences 2 pointers and makes lines
longer than they need to be, in turn making the code harder to read.
Replace &priv->si->hw accesses with a "hw" variable when there are 2 or
more accesses within a function that dereference this. This includes
loops, since &priv->si->hw is a loop invariant.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following patch will need to make this function also respond to
TC_QUERY_BASE, so make the processing more structured around the
tc_setup_type.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our current vsc9959_tas_guard_bands_update() algorithm has a limitation
imposed by the hardware design. To avoid packet overruns between one
gate interval and the next (which would add jitter for scheduled traffic
in the next gate), we configure the switch to use guard bands. These are
as large as the largest packet which is possible to be transmitted.
The problem is that at tc-taprio intervals of sizes comparable to a
guard band, there isn't an obvious place in which to split the interval
between the useful portion (for scheduling) and the guard band portion
(where scheduling is blocked).
For example, a 10 us interval at 1Gbps allows 1225 octets to be
transmitted. We currently split the interval between the bare minimum of
33 ns useful time (required to schedule a single packet) and the rest as
guard band.
But 33 ns of useful scheduling time will only allow a single packet to
be sent, be that packet 1200 octets in size, or 60 octets in size. It is
impossible to send 2 60 octets frames in the 10 us window. Except that
if we reduced the guard band (and therefore the maximum allowable SDU
size) to 5 us, the useful time for scheduling is now also 5 us, so more
packets could be scheduled.
The hardware inflexibility of not scheduling according to individual
packet lengths must unfortunately propagate to the user, who needs to
tune the queueMaxSDU values if he wants to fit more small packets into a
10 us interval, rather than one large packet.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data
types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the
existence of a per traffic class limitation of maximum frame sizes, with
a fallback on the port-based MTU.
As far as I am able to understand, the 802.1Q Service Data Unit (SDU)
represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding
any number of prepended VLAN headers which may be otherwise present in
the MSDU. Therefore, the queueMaxSDU is directly comparable to the
device MTU (1500 means L2 payload sizes are accepted, or frame sizes of
1518 octets, or 1522 plus one VLAN header). Drivers which offload this
are directly responsible of translating into other units of measurement.
To keep the fast path checks optimized, we keep 2 arrays in the qdisc,
one for max_sdu translated into frame length (so that it's comparable to
skb->len), and another for offloading and for dumping back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 09b5678c778f("tipc: remove dead code in tipc_net and relatives"),
struct distr_queue_item is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220928085636.71749-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 3226b158e67c ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e95 ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), use unsafe_memcpy(), as the sizing,
bounds-checking, and allocation are all very tightly coupled here.
This silences the false-positive reported by syzbot:
memcpy: detected field-spanning write (size 80) of single field "&n->sel" at net/sched/cls_u32.c:1043 (size 16)
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot+a2c4601efc75848ba321@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a96c0b05e97f0444@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220927153700.3071688-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac-axi-config subnode is present in multiple dwmac instance DTs,
document its content per snps,axi-config property description which is
a phandle to this subnode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927012449.698915-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
