summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-30drm/radeon: add UVD->DPM helper function (v5)Alex Deucher
Add a helper function for counting the number of open stream handles. v2: fix copy-pasta in comments and whitespace error v3: make function static since it's only used in radeon_uvd.c at the moment v4: make non-static again for future changes v5: make static again for new rework of dpm uvd changes Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/kms: remove r6xx+ blit copy routinesAlex Deucher
No longer used now that we use the async dma engines or CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: switch r6xx+ to using CP DMA for the blit copy callbackAlex Deucher
CP DMA is lighter weight than using the 3D engine. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/edid: add quirk for Medion MD30217PGAlex Deucher
This LCD monitor (1280x1024 native) has a completely bogus detailed timing (640x350@70hz). User reports that 1280x1024@60 has waves so prefer 1280x1024@75. Manufacturer: MED Model: 7b8 Serial#: 99188 Year: 2005 Week: 5 EDID Version: 1.3 Analog Display Input, Input Voltage Level: 0.700/0.700 V Sync: Separate Max Image Size [cm]: horiz.: 34 vert.: 27 Gamma: 2.50 DPMS capabilities: Off; RGB/Color Display First detailed timing is preferred mode redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605 blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 Supported established timings: 720x400@70Hz 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Supported standard timings: Supported detailed timing: clock: 25.2 MHz Image Size: 337 x 270 mm h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0 v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0 Monitor name: MD30217PG Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz Serial No: 501099188 EDID (in hex): 00ffffffffffff0034a4b80774830100 050f010368221b962a0c55a559479b24 125054afcf00310a0101010101018180 000000000000d60980a0205e63103060 0200510e1100001e000000fc004d4433 3032313750470a202020000000fd0038 4c1e530e000a202020202020000000ff 003530313039393138380a2020200078 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: friedrich@mailstation.de Cc: stable@vger.kernel.org
2013-08-30tipc: set sk_err correctly when connection failsErik Hugne
Should a connect fail, if the publication/server is unavailable or due to some other error, a positive value will be returned and errno is never set. If the application code checks for an explicit zero return from connect (success) or a negative return (failure), it will not catch the error and subsequent send() calls will fail as shown from the strace snippet below. socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3 connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111 sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe) The reason for this behaviour is that TIPC wrongly inverts error codes set in sk_err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30tcp: tcp_make_synack() should use sock_wmallocPhil Oester
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 onesLinus Lüssing
Currently we would still potentially suffer multicast packet loss if there is just either an IGMP or an MLD querier: For the former case, we would possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is because we are currently assuming that if either an IGMP or MLD querier is present that the other one is present, too. This patch makes the behaviour and fix added in "bridge: disable snooping if there is no querier" (b00589af3b04) to also work if there is either just an IGMP or an MLD querier on the link: It refines the deactivation of the snooping to be protocol specific by using separate timers for the snooped IGMP and MLD queries as well as separate timers for our internal IGMP and MLD queriers. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30tcp: do not use cached RTT for RTT estimationYuchung Cheng
RTT cached in the TCP metrics are valuable for the initial timeout because SYN RTT usually does not account for serialization delays on low BW path. However using it to seed the RTT estimator maybe disruptive because other components (e.g., pacing) require the smooth RTT to be obtained from actual connection. The solution is to use the higher cached RTT to set the first RTO conservatively like tcp_rtt_estimator(), but avoid seeding the other RTT estimator variables such as srtt. It is also a good idea to keep RTO conservative to obtain the first RTT sample, and the performance is insured by TCP loss probe if SYN RTT is available. To keep the seeding formula consistent across SYN RTT and cached RTT, the rttvar is twice the cached RTT instead of cached RTTVAR value. The reason is because cached variation may be too small (near min RTO) which defeats the purpose of being conservative on first RTO. However the metrics still keep the RTT variations as they might be useful for user applications (through ip). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30tty: ar933x_uart: allow to build the driver as a moduleGabor Juhos
Change the SERIAL_AR933X Kconfig option from 'bool' to 'tristate' in order to allow to build the driver as a module. Also extend the help text of the option to reflect that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: uio: Add driver for Humusoft MF624 DAQ PCI cardRostislav Lisovy
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: uio_pdrv_genirq: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: uio_pruss: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: uio_dmem_genirq: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: parport: Kconfig: exclude h8300 for PARPORT_PCChen Gang
h8300 does not support PARPORT_PC. The related error (with allmodconfig for h8300): CC [M] drivers/parport/parport_pc.o drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or directory Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30drivers: misc: ti-st: fix potential race if st_kim_start failsOleksandr Kozaruk
If st_kim_start() fails registered protocols should be removed. This is done by calling st_reg_complete(), which as comment states is called with spin lock held. But in st_register() when st_kim_start fails it is called without holding spin lock, creating possibility of concurrent access to st_gdata data members. Hold spin lock while calling st_reg_complete if st_kim_start() fails. Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@globallogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurelyK. Y. Srinivasan
The current code would attempt to negotiate a different protocol version if the current negotiation timed out. This triggers an assert in the host (on debug builds). Avoid this by negotiating a newer version only if the host properly rejects the current version being negotiated. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30firmware loader: fix pending_fw_head list corruptionMaxime Bizon
Got the following oops just before reboot: Unable to handle kernel NULL pointer dereference at virtual address 00000000 [<8028d300>] (__list_del_entry+0x44/0xac) [<802e3320>] (__fw_load_abort.part.13+0x1c/0x50) [<802e337c>] (fw_shutdown_notify+0x28/0x50) [<80034f80>] (notifier_call_chain.isra.1+0x5c/0x9c) [<800350ec>] (__blocking_notifier_call_chain+0x44/0x58) [<80035114>] (blocking_notifier_call_chain+0x14/0x18) [<80035d64>] (kernel_restart_prepare+0x14/0x38) [<80035d94>] (kernel_restart+0xc/0x50) The following race condition triggers here: _request_firmware_load() device_create_file(...) kobject_uevent(...) (schedule) (resume) firmware_loading_store(1) firmware_loading_store(0) list_del_init(&buf->pending_list) (schedule) (resume) list_add(&buf->pending_list, &pending_fw_head); wait_for_completion(&buf->completion); causing an oops later when walking pending_list after the firmware has been released. The proposed fix is to move the list_add() before sysfs attribute creation. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Ming Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()Xenia Ragiadakou
In usb_reset_and_verify_device(), hub_port_init() allocates a new bos descriptor to hold the value read by the device. The new bos descriptor has to be compared with the old one in order to figure out if device 's firmware has changed in which case the device has to be reenumerated. In the original code, none of the two descriptors was deallocated leading to memory leaks. This patch compares the old bos descriptor with the new one to detect change in firmware and releases the newly allocated bos descriptor to prevent memory leak. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Tested-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove debugging statement with ehci statistics in ehci_stop()Xenia Ragiadakou
This patch removes the ehci statictics information output in ehci_stop() because they do not provide interesting info. At any case, the current statistics can be viewed by reading the 'registers' file in debugfs. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove duplicate debug_async_open() prototype in ehci-dbg.cXenia Ragiadakou
This patch removes the duplicate of debug_async_open() prototype following three lines below the debug_async_open() declaration. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is setXenia Ragiadakou
The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove ehci_vdbg() verbose debugging statementsXenia Ragiadakou
This patch removes ehci_vdbg debugging statements from EHCI host controller driver because they produce too much information, lowering the signal to noise ratio when debugging, and because they are not used anymore. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30pkt_sched: fq: prefetch() fixEric Dumazet
kbuild bot reported following m68k build error : net/sched/sch_fq.c: In function 'fq_dequeue': >> net/sched/sch_fq.c:491:2: error: implicit declaration of function 'prefetch' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors While we are fixing this, move this prefetch() call a bit earlier. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30Staging:BCM:DDRInit.c:Renaming __FUNCTION__Paul McQuade
__Function__ gets renamed with __func__ Signed-Off-By: Paul McQuade <paulmcquad@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: bcm: remove Version.h file.navin patidar
many of the macros defined in Version.h are not being used, so we can remove the file. Signed-off-by: navin patidar <navinp@cdac.in> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: rtl8188eu: off by one in rtw_set_802_11_add_wep()Dan Carpenter
"keyid" is used as an offset into the ->dot11DefKey[] array. The array has 4 elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: copying one byte too muchDan Carpenter
There is a copy and paste bug here so we copy 4 bytes instead of 3. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: rtl8188eu: || vs && typoDan Carpenter
Obviously it's impossible for ->KeyLength to be both 5 and 13. I assume that && was intended here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: off by one bugsDan Carpenter
These should be "<" instead of "<=". Also we can use the ARRAY_SIZE() macro. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: crystalhd: Resolve sparse 'different base types' warnings.Shaun Laing
The result from crystalhd_get_sgle_paddr and crystalhd_get_sgle_len are later used in calculations, so the result should be in CPU byte ordering. Signed-off-by: Shaun Laing <shaun@xresource.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: r8188eu: Fix compiler warnings in os_dep/ioctl_linux.cLarry Finger
The 0-DAY kernel build testing backend reports the following compiler warnings not shown on my compiler version/options: drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_efuse_get': >> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5836:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations] sprintf(extra, "%s%02X ", extra, pEfuseHal->fakeEfuseInitMap[i+j]); ^ drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5830:3: note: containing loop for (i = 0; i < EFUSE_MAP_SIZE; i += 16) { ^ >> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6042:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations] sprintf(extra, "%s %02X", extra, pEfuseHal->fakeEfuseModifiedMap[i+j]); ^ drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6036:3: note: containing loop for (i = 0; i < EFUSE_MAP_SIZE; i += 16) { ^ The problem is due to improper settings for some of the EFUSE_XXX defines such that EFUSE_MAP_SIZE was larger than the sizes of the marked arrays. Thanks to Fengguang Wu for helping me understand the root cause. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30perf trace: Handle missing HUGEPAGE definesDavid Ahern
Needed for compile on Fedora 12 which goes back to the 2.6.32 kernel. Might be needed for RHEL6. I use F12 to compile static binaries for Wind River Linux 4.3. Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/n/tip-nd0d7rbajgm8k6tah3xv34v1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-30staging: dgap: Add missing #include <linux/slab.h>Geert Uytterhoeven
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_module’: drivers/staging/dgap/dgap_driver.c:423: error: implicit declaration of function ‘kfree’ drivers/staging/dgap/dgap_driver.c: In function ‘dgap_driver_kzmalloc’: drivers/staging/dgap/dgap_driver.c:940: error: implicit declaration of function ‘kmalloc’ drivers/staging/dgap/dgap_driver.c:940: warning: initialization makes pointer from integer without a cast Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30staging: dgnc: adds TODOLidza Louina
This patchs adds a TODO for the driver. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Document which files are used by libusbHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Document the speed file used by libusbHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Move files with known users to stableHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30USB: fix build error when CONFIG_PM_SLEEP isn't enabledAlan Stern
This patch fixes a build error that occurs when CONFIG_PM is enabled and CONFIG_PM_SLEEP isn't: >> drivers/usb/host/ohci-pci.c:294:10: error: 'usb_hcd_pci_pm_ops' undeclared here (not in a function) .pm = &usb_hcd_pci_pm_ops Since the usb_hcd_pci_pm_ops structure is defined and used when CONFIG_PM is enabled, its declaration should not be protected by CONFIG_PM_SLEEP. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: kbuild test robot <fengguang.wu@intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: r8a66597-hcd: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: phy-tegra-usb: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: acm gadget: Null termintate strings tableGraham Williams
The gadget strings table should be null terminated. usb_gadget_get_string() loops through the table expecting a null at the end of the list. Signed-off-by: Graham Williams <gwilli@broadcom.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30hvc_xen: Remove unnecessary __GFP_ZERO from kzallocJoe Perches
kzalloc already adds this __GFP_ZERO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-30drivers/xen-tpmfront: Fix compile issue with missing option.Konrad Rzeszutek Wilk
Randy reports: x86_64: drivers/built-in.o: In function `xen_tpmfront_init': xen-tpmfront.c:(.init.text+0x257c): undefined reference to `xenbus_register_frontend' This is nicely fixed by selecting the XenBus frontend module. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-30xen/balloon: don't set P2M entry for auto translated guestWei Liu
In commit cd9151e2: xen/balloon: set a mapping for ballooned out pages we have the ballooned out page's mapping set to a scratch page. That commit also sets the P2M entry of ballooned out page to the scratch page's MFN. This is necessary for PV guest but not for HVM guest. On the other hand, setting the P2M entry would trigger BUG_ON in __set_phys_to_machine. The correct thing to do here is to avoid calling __set_phys_to_machine for auto translated guest. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-08-30ASoC: rt5640: change widget sequence for depopBard Liao
Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-dapmMark Brown
2013-08-30ASoC: dapm: Fix auto-disable for inverted controlsLars-Peter Clausen
We need to make sure that the control's cached value is initialized to the same value as the control's widget->on_val. Otherwise updates might be lost. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=yAxel Lin
lp872x regulator driver can be built a module after commit 631a1fc "regulator: build: Allow most regulators to be built as modules". Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: tps65217: Convert to use linear rangesAxel Lin
Below is the equation in original code: tps65217_uv1_ranges: 0 ... 24: uV = vsel * 25000 + 900000; 25 ... 52: uV = (vsel - 24) * 50000 + 1500000; = (vsel - 25) * 50000 + 1550000; 53 ... 55: uV = (vsel - 52) * 100000 + 2900000; = (vsel - 53) * 100000 + 3000000; 56 ... 62: uV = 3300000; tps65217_uv2_ranges: 0 ... 8: uV = vsel * 50000 + 1500000; 9 ... 13: uV = (vsel - 8) * 100000 + 1900000; = (vsel - 9) * 100000 + 2000000; 14 ... 31: uV = (vsel - 13) * 50000 + 2400000; = (vsel - 14) * 50000 + 2450000; The voltage tables are composed of linear ranges. This patch converts this driver to use multiple linear ranges APIs. In original code, voltage range for DCDC1 is 900000 ~ 1800000 and voltage range for DCDC3 is 900000 ~ 1500000. This patch separates the range 25~52 in tps65217_uv1_ranges table to two linear ranges: 25~30 and 31~52. This change makes it possible to reuse the same linear_ranges table for DCDCx. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30regulator: da9063: Use IS_ERR to check return value of regulator_register()Axel Lin
regulator_register() does not return NULL, it returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 04:05:57 +0000