summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-19dt-bindings: usb: mtu3: remove optional pinctrlsChunfeng Yun
Remove optional pinctrls due to using FORCE/RG_IDDIG to implement manual switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19dt-bindings: usb: mtu3: remove dummy clocks and add optional onesChunfeng Yun
Remove dummy clocks for usb wakeup and add optional ones for mcu_bus and dma_bus bus. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19dt-bindings: usb: mtu3: add a optional property to disable u3portsChunfeng Yun
Add a new optional property to disable u3ports Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: set otg_sel for u2port only if works as dual-role modeChunfeng Yun
When set otg_sel(SSUSB_U2_PORT_OTG_SEL) for u2port which supports dual-role mode, the controller will automatically switch mode between host and device according to IDDIG signal. But if the u2port only supports device mode, and no IDDIG pin is provided, setting otg_sel may cause failure of detection by host. So set it only for dual-role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: set invalid dr_mode as dual-role modeChunfeng Yun
Treat dr_mode of USB_DR_MODE_UNKNOWN as USB_DR_MODE_OTG to enhance functional robustness. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: get optional vbus for host only modeChunfeng Yun
When dr_mode is set as USB_DR_MODE_HOST, it's better to try to get optional vbus, this can increase flexibility, although we can set vbus as always on for regulator or put it in host driver to turn it on. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add support for usb3.1 IPChunfeng Yun
Support SuperSpeedPlus for usb3.1 device IP Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switchChunfeng Yun
In order to keep manual DRD switch independent on IDDIG interrupt, make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to implement manual DRD switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support 36-bit DMA addressChunfeng Yun
add support for 36-bit DMA address [ Felipe Balbi: fix printk format for dma_addr_t ] Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add optional mcu and dma bus clocksChunfeng Yun
There are mcu_bus and dma_bus clocks needed to be turned on/off by driver on some SoCs, so add them as optional ones Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: remove dummy wakeup debounce clocksChunfeng Yun
The wakeup debounce clocks for each ports in fact are not needed, so remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support option to disable usb3 portsChunfeng Yun
Add support to disable specific usb3 ports, it's useful when usb3 phy is shared with PCIe or SATA, because we should disable the corresponding usb3 port if the phy is used by PCIe or SATA. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: fix error return code in ssusb_gadget_init()Chunfeng Yun
When failing to get IRQ number, platform_get_irq() may return -EPROBE_DEFER, but we ignore it and always return -ENODEV, so fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc3: ep0: Clean up unused variablesChristos Gkekas
Many variables in ep0 are set but never used, so should be removed. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc2: add support for STM32F7xx USB OTG HSAmelie Delaunay
This patch adds the dwc2_set_params function for STM32F7xx USB OTG HS. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19dt-bindings: usb: Document the STM32F7xx DWC2 USB OTG HS core bindingAmelie Delaunay
This patch adds binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7xx SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: f_uvc: make uvc_v4l2_fops constBhumika Goyal
Make this const as it is only stored in the const field of a structure video_device in the file referencing it. Make the declaration const too. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: udc: renesas_usb3: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the of_device_get_match_data() helper instead of open coding, postponing the matching until when it's really needed. Note that the renesas_usb3 driver is used with DT only, so there's always a valid match. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: renesas_usbhs: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the of_device_get_match_data() helper instead of open coding. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: udc: renesas_usb3: add support for generic phyYoshihiro Shimoda
This patch adds support for generic phy as an optional. If you want to use a generic phy (e.g. phy-rcar-gen3-usb3 driver) on this driver, you have to do "insmod phy-rcar-gen3-usb3.ko" first for now. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: udc: renesas_usb3: Add suspend/resume functionsYoshihiro Shimoda
This patch adds support suspend/resume functions Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [shimoda: add the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()Kazuya Mizuguchi
This patch moves pm_runtime_{en,dis}able() call timing to renesas_usb3_{probe,remove}() for supporting PM_SLEEP feature in the future. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [shimoda: Revise the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: renesas_usbhs: add support for R-Car D3Yoshihiro Shimoda
This patch adds support for R-Car D3. This SoC needs to release the PLL reset by the UGCTRL register. So, since this is not the same as other R-Car Gen3 SoCs, this patch adds a new type as "USBHS_TYPE_RCAR_GEN3_WITH_PLL". Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: renesas_usbhs: unify Gen2/3 pipe_config settingYoshihiro Shimoda
This patch unifies the Gen2 and Gen3 pipe_config setting on usbhs_parse_dt(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: phy: mxs: add usb charger type detectionLi Jun
mxs phy has data pin contact and usb charger detector blocks which can be controlled by software to detect charger type for SDP, CDP and DCP. Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc3: gadget: simplify __dwc3_gadget_kick_transfer() prototypeFelipe Balbi
Now that all the information we need sits in struct dwc3_ep, we can start taking only a pointer to struct dwc3_ep as an argument. This allows us to clean the code up a bit. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc3: gadget: cache frame number in struct dwc3_epFelipe Balbi
This is in preparation to simplifying prototype of __dwc3_gadget_kick_transfer(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()Felipe Balbi
There is more possibility for sharing code if we just realise that now __dwc3_gadget_kic_transfer() knows to break out early if there are no TRBs left. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: dwc3: gadget: check for lack of TRBs a bit earlierFelipe Balbi
This will let us call __dwc3_gadget_kick_transfer() unconditionally. No functional changes, cleanup only. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: phy: phy-generic: propagate clk_get error if clock is requiredLucas Stach
If the clock handle is given in the DT, it means the clock is required for proper operation of the PHY. In that case a failure to obtain the clock must be propagated to stop the driver from probing. This fixes working with clocks, which request probe deferral. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: gadget: Add kerneldoc for some neglected structure fieldsJonathan Corbet
A couple of structures in <linux/usb/gadget.h> have incomplete kerneldoc comments, leading to these warnings in the docs build: ./include/linux/usb/gadget.h:230: warning: No description found for parameter 'claimed' ./include/linux/usb/gadget.h:230: warning: No description found for parameter 'enabled' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_altset_not_supp' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_stall_not_supp' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_zlp_not_supp' Document those fields to make the warnings go away. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19Merge tag 'usb-serial-4.14-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.14-rc6 Here's a new metro-usb device id for another bar-code scanner. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-19parisc: Fix detection of nonsynchronous cr16 cycle countersHelge Deller
For CPUs which have an unknown or invalid CPU location (physical location) assume that their cycle counters aren't syncronized across CPUs. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19parisc: Export __cmpxchg_u64 unconditionallyGuenter Roeck
__cmpxchg_u64 is built and used outside CONFIG_64BIT and thus needs to be exported. This fixes the following build error seen when building parisc:allmodconfig. ERROR: "__cmpxchg_u64" [drivers/net/ethernet/intel/i40e/i40e.ko] undefined! Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19parisc: Fix double-word compare and exchange in LWS code on 32-bit kernelsJohn David Anglin
As discussed on the debian-hppa list, double-wordcompare and exchange operations fail on 32-bit kernels. Looking at the code, I realized that the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29" instruction. This increments %r26 and causes the following store to write to the wrong location. Note by Helge Deller: The patch applies cleanly to stable kernel series if this upstream commit is merged in advance: f4125cfdb300 ("parisc: Avoid trashing sr2 and sr3 in LWS code"). Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de> Fixes: 89206491201c ("parisc: Implement new LWS CAS supporting 64 bit operations.") Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19Merge tag 'drm-intel-fixes-2017-10-18-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fix for stable: - Fix DDI translation tables for BDW (Chris). Critical fix: - Fix GPU Hang on GVT (Changbin). Other fixes: - Fix eviction when GGTT is idle (Chris). - CNL PLL fixes (Rodrigo). - Fix pwrite into shmemfs (Chris). - Mask bits for BXT and CHV L3 Workaround WaProgramL3SqcReg1Default (Oscar). * tag 'drm-intel-fixes-2017-10-18-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Use a mask when applying WaProgramL3SqcReg1Default drm/i915: Report -EFAULT before pwrite fast path into shmemfs drm/i915/cnl: Fix PLL initialization for HDMI. drm/i915/cnl: Fix PLL mapping. drm/i915: Use bdw_ddi_translations_fdi for Broadwell drm/i915: Fix eviction when the GGTT is idle but full drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS
2017-10-19commoncap: move assignment of fs_ns to avoid null pointer dereferenceColin Ian King
The pointer fs_ns is assigned from inode->i_ib->s_user_ns before a null pointer check on inode, hence if inode is actually null we will get a null pointer dereference on this assignment. Fix this by only dereferencing inode after the null pointer check on inode. Detected by CoverityScan CID#1455328 ("Dereference before null check") Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-19Merge commit 'tags/keys-fixes-20171018' into fixes-v4.14-rc5James Morris
2017-10-18Input: stmfts - fix setting ABS_MT_POSITION_* maximum sizeChanwoo Choi
The commit 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper function in order to get the value of common properties. But, commit 78bcac7b2ae1e didn't set the capability of ABS_MT_POSITION_* before calling touchscreen_parse_properties(). In result, the max_x and max_y of 'struct touchscreen_properties' were not set. Fixes: 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreenJeff Lance
Step config setting for 5 wire touchscreen is incorrect for Y coordinates. It was broken while we moved to DT. If you look close at the offending commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable"), the change was: - STEPCONFIG_XNP | STEPCONFIG_YPN; + ts_dev->bit_xn | ts_dev->bit_yp; while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the same. Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Signed-off-by: Jeff Lance <j-lance1@ti.com> [vigneshr@ti.com: Rebase to v4.14-rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Single amdgpu regression fix. * 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/amdgpu: discard commands of killed processes"
2017-10-18Convert fs/*/* to SB_I_VERSIONMatthew Garrett
[AV: in addition to the fix in previous commit] Signed-off-by: Matthew Garrett <mjg59@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-19Merge branch 'linux-4.14' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
some nouveau fixes. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/fbcon: fix oops without fbdev emulation drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards drm/nouveau/bsp/g92: disable by default drm/nouveau/mmu: flush tlbs before deleting page tables
2017-10-19drm/nouveau/fbcon: fix oops without fbdev emulationPavel Roskin
This is similar to an earlier commit 52dfcc5ccfbb ("drm/nouveau: fix for disabled fbdev emulation"), but protects all occurrences of helper.fbdev in the source. I see oops in nouveau_fbcon_accel_save_disable() called from nouveau_fbcon_set_suspend_work() on Linux 3.13 when CONFIG_DRM_FBDEV_EMULATION option is disabled. Signed-off-by: Pavel Roskin <plroskin@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-10-18Merge tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: - fix some more CONFIG_XFS_RT related build problems - fix data loss when writeback at eof races eofblocks gc and loses - invalidate page cache after fs finishes a dio write - remove dirty page state when invalidating pages so releasepage does the right thing when handed a dirty page * tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: move two more RT specific functions into CONFIG_XFS_RT xfs: trim writepage mapping to within eof fs: invalidate page cache after end_io() in dio completion xfs: cancel dirty pages on invalidation
2017-10-18Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three small fixes: - A fix for skd, it was using kfree() to free a structure allocate with kmem_cache_alloc(). - Stable fix for nbd, fixing a regression using the normal ioctl based tools. - Fix for a previous fix in this series, that fixed up inconsistencies between buffered and direct IO" * 'for-linus' of git://git.kernel.dk/linux-block: fs: Avoid invalidation in interrupt context in dio_complete() nbd: don't set the device size until we're connected skd: Use kmem_cache_free
2017-10-18USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()Alan Stern
Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18Revert "drm/amdgpu: discard commands of killed processes"Alex Deucher
This causes instability in piglit. It's fixed in drm-next with: 515c6faf85970af529953ec137b4b6fcb3272e25 1650c14b459ff9c85767746f1ef795a780653128 214a91e6bfabaa6cbfa692df8732000aab050795 29d253553559dba919315be847f4f2cce29edd42 79867462634836ee5c39a2cdf624719feeb189bd This reverts commit 6af0883ed9770cf9b0a4f224c91481484cd1b025. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-18drm/i915: Use a mask when applying WaProgramL3SqcReg1DefaultOscar Mateo
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important (although we probably aren't at the moment because 0 seems to be the default for all the other bits). v2: Extra parentheses (Michel) Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf") Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 930a784d02339be437fec07b3bb7213bde0ed53b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-18drm/i915: Report -EFAULT before pwrite fast path into shmemfsChris Wilson
When pwriting into shmemfs, the fast path pagecache_write does not notice when it is writing to beyond the end of the truncated shmemfs inode. Report -EFAULT directly when we try to use pwrite into the !I915_MADV_WILLNEED object. Fixes: 7c55e2c5772d ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl") Testcase: igt/gem_madvise/dontneed-before-pwrite Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk (cherry picked from commit a6d65e451cc4e7127698384868a4447ee7be7d16) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 05:24:02 +0000