Age | Commit message (Collapse) | Author |
|
Some selftests need libynl.a. When building it try to skip
generating the ReST documentation, libynl.a does not depend
on them.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203214850.1282291-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antoine Tenart says:
====================
net-sysfs: remove the rtnl_trylock/restart_syscall construction
The series initially aimed at improving spins (and thus delays) while
accessing net sysfs under rtnl lock contention[1]. The culprit was the
trylock/restart_syscall constructions. There wasn't much interest at the
time but it got traction recently for other reasons (lowering the rtnl
lock pressure).
Since v1[2]:
- Do not export rtnl_lock_interruptible [Stephen].
- Add netdev_warn_once messages in rx_queue_add_kobject [Jakub].
Since the RFC[1]:
- Limit the breaking of the sysfs protection to sysfs_rtnl_lock() only
as this is not needed in the whole rtnl locking section thanks to the
additional check on dev_isalive(). This simplifies error handling as
well as the unlocking path.
- Used an interruptible version of rtnl_lock, as done by Jakub in
his experiments.
- Removed a WARN_ONCE_ONCE [Greg].
- Removed explicit inline markers [Stephen].
Most of the reasoning is explained in comments added in patch 1. This
was tested by stress-testing net sysfs attributes (read/write ops) while
adding/removing queues and adding/removing veths, all in parallel. I
also used an OCP single node cluster, spawning lots of pods.
[1] https://lore.kernel.org/all/20231018154804.420823-1-atenart@kernel.org/T/
[2] https://lore.kernel.org/all/20250117102612.132644-1-atenart@kernel.org/T/
====================
Link: https://patch.msgid.link/20250204170314.146022-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the commit removing remove rtnl_trylock from device
attributes we here apply the same technique to networking queues.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-5-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the (upcoming) removal of the rtnl_trylock/restart_syscall logic
and because of how Tx/Rx queues are implemented (and their
requirements), it might happen that a queue is re-added before having
the chance to be cleared. In such rare case, do not complete the queue
addition operation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-4-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an ABBA deadlock between net device unregistration and sysfs
files being accessed[1][2]. To prevent this from happening all paths
taking the rtnl lock after the sysfs one (actually kn->active refcount)
use rtnl_trylock and return early (using restart_syscall)[3], which can
make syscalls to spin for a long time when there is contention on the
rtnl lock[4].
There are not many possibilities to improve the above:
- Rework the entire net/ locking logic.
- Invert two locks in one of the paths — not possible.
But here it's actually possible to drop one of the locks safely: the
kernfs_node refcount. More details in the code itself, which comes with
lots of comments.
Note that we check the device is alive in the added sysfs_rtnl_lock
helper to disallow sysfs operations to run after device dismantle has
started. This also help keeping the same behavior as before. Because of
this calls to dev_isalive in sysfs ops were removed.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/
[2] https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
[3] https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[4] https://lore.kernel.org/all/20210928125500.167943-1-atenart@kernel.org/T/
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flow director needs only one MSI-X. Load it before RDMA to save MSI-X
for it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After implementing pf->msix.max field, base vector for other use cases
(like VFs) can be fixed. This simplify code when changing MSI-X amount
on particular VF, because there is no need to move a base vector.
A fixed base vector allows to reserve vectors from the beginning
instead of from the end, which is also simpler in code.
Store total and rest value in the same struct as max and min for PF.
Move tracking vectors from ice_sriov.c to ice_irq.c as it can be also
use for other none PF use cases (SIOV).
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement enable_rdma devlink parameter to allow user to turn RDMA
feature on and off.
It is useful when there is no enough interrupts and user doesn't need
RDMA feature.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It can be needed to have some MSI-X allocated as static and rest as
dynamic. For example on PF VSI. We want to always have minimum one MSI-X
on it, because of that it is allocated as a static one, rest can be
dynamic if it is supported.
Change the ice_get_irq_res() to allow using static entries if they are
free even if caller wants dynamic one.
Adjust limit values to the new approach. Min and max in limit means the
values that are valid, so decrease max and num_static by one.
Set vsi::irq_dyn_alloc if dynamic allocation is supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move responsibility of MSI-X requesting for RDMA feature from ice driver
to irdma driver. It is done to allow simple fallback when there is not
enough MSI-X available.
Change amount of MSI-X used for control from 4 to 1, as it isn't needed
to have more than one MSI-X for this purpose.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove the field to allow having more queues than MSI-X on VSI. As
default the number will be the same, but if there won't be more MSI-X
available VSI can run with at least one MSI-X.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With dynamic approach to alloc MSI-X there is no sense to statically
split MSI-X between PF features.
Splitting was also calculating needed MSI-X. Move this part to separate
function and use as max value.
Remove ICE_ESWITCH_MSIX, as there is no need for additional MSI-X for
switchdev.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use generic devlink PF MSI-X parameter to allow user to change MSI-X
range.
Add notes about this parameters into ice devlink documentation.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotation for relocation root to fix a splat warning
while merging roots
- fix assertion failure when splitting ordered extent after transaction
abort
- don't print 'qgroup inconsistent' message when rescan process updates
qgroup data sooner than the subvolume deletion process
- fix use-after-free (accessing the error number) when attempting to
join an aborted transaction
- avoid starting new transaction if not necessary when cleaning qgroup
during subvolume drop
* tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid starting new transaction when cleaning qgroup during subvolume drop
btrfs: fix use-after-free when attempting to join an aborted transaction
btrfs: do not output error message if a qgroup has been already cleaned up
btrfs: fix assertion failure when splitting ordered extent after transaction abort
btrfs: fix lockdep splat while merging a relocation root
|
|
Use string choices helpers to simplify the code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501190707.qQS8PGHW-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make config option R8169_LEDS user-visible, so that users can remove
support if not needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d29f0cdb-32bf-435f-b59d-dc96bca1e3ab@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make config symbol REALTEK_PHY_HWMON user-visible, so that users can
remove support if not needed.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3466ee92-166a-4b0f-9ae7-42b9e046f333@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused flexible-array member `buf` and, with this, fix the following
warnings:
drivers/net/ethernet/aquantia/atlantic/aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/ethernet/aquantia/atlantic/hw_atl/../aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Suggested-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/Z6F3KZVfnAZ2FoJm@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers should always disable a NAPI instance before removing it.
If they don't the instance may be queued for polling.
Since commit 86e25f40aa1e ("net: napi: Add napi_config")
we also remove the NAPI from the busy polling hash table
in napi_disable(), so not disabling would leave a stale
entry there.
Use of busy polling is relatively uncommon so bugs may be lurking
in the drivers. Add an explicit warning.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250203215816.1294081-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previous implementation assumes that there is 1:1 matching between
vectors and queues. It isn't always true.
Get minimum value from Rx/Tx queues to determine combined queues number.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
lio_get_device_id() has been unused since 2018's
commit 64fecd3ec512 ("liquidio: remove obsolete functions and data
structures")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203183343.193691-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlxsw_sp_ipip_lb_ul_vr_id() has been unused since 2020's
commit acde33bf7319 ("mlxsw: spectrum_router: Reduce
mlxsw_sp_ipip_fib_entry_op_gre4()")
mlxsw_sp_rif_exists() has been unused since 2023's
commit 49c3a615d382 ("mlxsw: spectrum_router: Replay MACVLANs when RIF is
made")
mlxsw_sp_rif_vid() has been unused since 2023's
commit a5b52692e693 ("mlxsw: spectrum_switchdev: Manage RIFs on PVID
change")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250203190141.204951-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5dr_domain_sync() was added in 2019 by
commit 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
but hasn't been used.
Remove it.
mlx5dr_domain_sync() was the only user of
mlx5dr_send_ring_force_drain().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185958.204794-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last use of mlx4_find_cached_mac() was removed in 2014 by
commit 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE")
mlx4_zone_free_entries() was added in 2014 by
commit 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
but hasn't been used. (The _unique version is used)
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185229.204279-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some typos in comments/messages:
- Valiate -> Validate
- acceptible -> acceptable
- acces -> access
- relased -> released
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203175419.4146-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a soft lockup in rose_loopback_timer(),
with a repro calling bind() from multiple threads.
rose_bind() must lock the socket to avoid this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+7ff41b5215f0c534534e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67a0f78d.050a0220.d7c5a.00a0.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250203170838.3521361-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Aspeed device supports rgmii, rgmii-id, rgmii-rxid, rgmii-txid so
document them.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250203151306.276358-2-ninad@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_parms_destroy() is a simple kfree(), no need for
a forward declaration.
neigh_parms_put() can instead call kfree() directly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203151152.3163876-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
[ 104.595913] Call Trace:
[ 104.595915] <TASK>
[ 104.595918] ? show_regs+0x6c/0x80
[ 104.595923] ? __warn+0x8d/0x150
[ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595934] ? report_bug+0x182/0x1b0
[ 104.595938] ? handle_bug+0x6e/0xb0
[ 104.595940] ? exc_invalid_op+0x18/0x80
[ 104.595942] ? asm_exc_invalid_op+0x1b/0x20
[ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic]
[ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic]
[ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic]
[ 104.595975] __dev_close_many+0xad/0x160
[ 104.595978] dev_close_many+0x99/0x170
[ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20
[ 104.595981] ? __call_rcu_common+0xcd/0x700
[ 104.595984] unregister_netdevice_queue+0xc6/0x110
[ 104.595986] unregister_netdev+0x1c/0x30
[ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic]
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Jacob Moroni <mail@jakemoroni.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XFRM API makes sure that xs->xso.dev is valid in all XFRM offload
callbacks. There is no need to check it again.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/0b2f8f5f09701bb43bbd83b94bfe5cb506b57adc.1738587150.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthreads fix from Frederic Weisbecker:
- Properly handle return value when allocation fails for the preferred
affinity
* tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: Fix return value on kzalloc() failure in kthread_affine_preferred()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching fix from Petr Mladek:
- Fix livepatching selftests for util-linux-2.40.x
* tag 'livepatching-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: handle PRINTK_CALLER in check_result()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
|
|
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes: f2cce89a074e ("rxrpc: Implement a mechanism to send an event notification to a connection")
Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.
The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:
gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \
state UNKNOWN mode DEFAULT group default qlen 1000
link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
14916 23 0 15 0 0
TX: bytes packets errors dropped carrier collsns
0 1566 0 0 0 0
Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.
With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.
Fixes: c77200c07491 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
ethtool: rss: minor fixes for recent RSS changes
Make sure RSS_GET messages are consistent in do and dump.
Fix up a recently added safety check for RSS + queue offset.
Adjust related tests so that they pass on devices which
don't support RSS + queue offset.
====================
Link: https://patch.msgid.link/20250201013040.725123-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
supported
Vast majority of drivers does not support queue offset.
Simply return if the rss context + queue ntuple fails.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under Fixes adds ntuple rules but never deletes them.
Fixes: 29a4bc1fe961 ("selftest: extend test_rss_context_queue_reconfigure for action addition")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The info.flow_type is for RXFH commands, ntuple flow_type is inside
the flow spec. The check currently does nothing, as info.flow_type
is 0 (or even uninitialized by user space) for ETHTOOL_SRXCLSRLINS.
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ec6e57beaf8b ("ethtool: rss: don't report key if device
doesn't support it") intended to stop reporting key fields for
additional rss contexts if device has a global hashing key.
Later we added dump support and the filtering wasn't properly
added there. So we end up reporting the key fields in dumps
but not in dos:
# ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --do rss-get \
--json '{"header": {"dev-index":2}, "context": 1 }'
{
"header": { ... },
"context": 1,
"indir": [0, 1, 2, 3, ...]]
}
# ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --dump rss-get
[
... snip context 0 ...
{ "header": { ... },
"context": 1,
"indir": [0, 1, 2, 3, ...],
-> "input_xfrm": 255,
-> "hfunc": 1,
-> "hkey": "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
}
]
Hide these fields correctly.
The drivers/net/hw/rss_ctx.py selftest catches this when run on
a device with single key, already:
# Check| At /root/./ksft-net-drv/drivers/net/hw/rss_ctx.py, line 381, in test_rss_context_dump:
# Check| ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero")
# Check failed {0} == {0} key is all zero
not ok 8 rss_ctx.test_rss_context_dump
Fixes: f6122900f4e2 ("ethtool: rss: support dumping RSS contexts")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kthread_affine_preferred() incorrectly returns 0 instead of -ENOMEM
when kzalloc() fails. Return 'ret' to ensure the correct error code is
propagated.
Fixes: 4d13f4304fa4 ("kthread: Implement preferred affinity")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501301528.t0cZVbnq-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Pull d_revalidate fix from Al Viro:
"Fix a braino in d_revalidate series: check ->d_op for NULL"
* tag 'pull-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in "9p: fix ->rename_sem exclusion"
|
|
Jakub Kicinski says:
====================
MAINTAINERS: recognize Kuniyuki Iwashima as a maintainer
Kuniyuki Iwashima has been a prolific contributor and trusted reviewer
for some core portions of the networking stack for a couple of years now.
Formalize some obvious areas of his expertise and list him as a maintainer.
====================
Link: https://patch.msgid.link/20250202014728.1005003-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a MAINTAINERS entry for UNIX socket, Kuniyuki has been
the de-facto maintainer of this code for a while.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a MAINTAINERS entry for BSD sockets. List the top 3
reviewers as maintainers. The entry is meant to cover core
socket code (of which there isn't much) but also reviews
of any new socket families.
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
List Kuniyuki as an official TCP reviewer.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Submissions to the docs seem to not get properly CCed.
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250202005024.964262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|