summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-11drm/amdgpu: Do not move root PT bo to relocated listxinhui pan
As root PD has no parent, we just need move its status to idle. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> CC: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amdgpu: correct comment to clear up the confusionGuchun Chen
Former comment looks to be one intended behavior in code, actually it's not. So correct it. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/powerplay: suppress nonsupport profile mode overrun messagePrike Liang
SMU12 not support WORKLOAD_DEFAULT_BIT and WORKLOAD_PPLIB_POWER_SAVING_BIT. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/powerplay: update smu11_driver_if_navi10.hEvan Quan
To pair the latest SMU firmwares. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: DCN2.x Do not program DPPCLK if same valueSung Lee
[WHY] Programming DPPCLK to the same value currently set may cause underflow while playing video in certain conditions. [HOW] Only program DPPCLK if clock is not the same as the previous value programmed. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Use fb_base/fb_offset if available for translationNicholas Kazlauskas
[Why] In the case where we do have these passed in then we should be using these instead of the registers - those are only programmed when booting the adapter as primary. [How] Check if fb_base/fb_offset are non-zero. The value of 0 is invalid for fb_base but is valid for fb_offset on dGPU. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Add psr get_state callWyatt Wood
[Why] Driver needs to know PSR state. [How] Use GPINT to call to firmware and get psr state. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Don't map ATOM_ENABLE to ATOM_INITNicholas Kazlauskas
[Why] In DCN hardware sequencer we do actually call ATOM_INIT correctly per pipe. The workaround is not necessary for command table offloading. [How] Drop the workaround since it's not needed. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: add monitor patch to disable SCDC read/writeMartin Leung
[why] customer issue: found that for their specific panel, EDID register space being overwritten during SCDC read write [how] customer accepted HDMI 2 features not working - disabled SCDC read/write as well as HDMI 2 in general based on monitor patch Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: add odm split logic to scaling calculationsDmytro Laktyushkin
Currently odm scaling calculations are only done when adding initial odm pipe. Any scaling re-calculations will mess up odm because of this. This change resolves the problem by updating scaling split logic to handle odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: 3.2.72Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Drop unused field from dc_panel_patchNikola Cornij
In the struct dc_panel_patch, we have a field named manage_secondary_link which is not used by any part of the code. This commit drops the unused field. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Update register definesAnthony Koo
[Why] Some register defines are redundant or updated [How] Update register defines Remove some redundant defines Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Sun peng Li <Sunpeng.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Toggle VSR button cause system crashPeikang Zhang
[Why] in dcn10_apply_ctx_for_surface(), if we hit !top_pipe_to_program, pipe_ctx->update_flags could not get cleared. [How] Moved clearing pipe_ctx->update_flags logic before if (!top_pipe_to_program) to gurantee pipe_ctx->update_flags get cleared. Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Add backlight support via AUXRodrigo Siqueira
Several modern displays support HDR/OLED panel, and one of the interesting changes provided by this technology is the new approach for handling backlight. More precisely, in the traditional way, we use PWM to manage display backlight; however, with HDR/OLED we begin to use DP Aux channel for adjusting the backlight. This patch, enable the backlight control in HDR/OLED display via DP Aux. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Add AUX backlight registerRodrigo Siqueira
Introduce vendor-specific registers for handling backlight via AUX. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Hookup psr set version callWyatt Wood
[Why] Set version is currently not called. [How] Add call to set version from copy settings. This should be the only time this is called as the eDP caps should never change. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Pass override OUI in to dc_init_dataCalvin Hou
[WHY] Vendor dongle requires propietary OUI and handshake sequence. [HOW] Add a new structure to dc_init_data, to allow creator to pass an override vendor_oui. This value will be written to DP_SOURCE_OUI instead of AMD signature, when dpcd_set_source_specific_data is called. Signed-off-by: Calvin Hou <Calvin.Hou@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Remove unused values from psr structWyatt Wood
[Why] Taking up unnecessary space. [How] Remove unused values from psr struct. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: Don't treat missing command table as failureNicholas Kazlauskas
[Why] With the fallback case in place for command table offloading via DMCUB it's no longer an error for the command table to be missing specific entries. [How] Drop the BREAK_TO_DEBUGGER(); Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amd/display: always apply T7/T9 delay logicMartin Leung
[why] before we exit early in edp_reciever_ready if we detect that panel is not edp or below rev 1.2. This will skip the backlight/t7 delay panel patch. [how] edit logic to ensure panel patch is applied regardless of edp rev. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amdgpu/vcn2.5: fix warningJames Zhu
Fix warning during switching to dpg pause mode for VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16 Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amdgpu: limit GDS clearing workaround in cold boot sequenceGuchun Chen
GDS clear workaround will cause gfx failure in suspend/resume case. [ 98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110 [ 98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110 [ 98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110 As this workaround is specific to the HW bug of GDS's ECC error existing in cold boot up, so bypass this workaround in suspend/ resume case after booting up. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/amdgpu/sriov set driver_table address in VFJack Zhang
With the recent patch to unify VRAM address for driver table(a83f82e). VF cannot dump table info any more because SMU_MSG_SetDriverDramAddrHigh/Low were deleted in the function of smu_update_table. Therefore, VF also needs to set driver_table address in smu_hw_init to fix this regression issue. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-11drm/irq: remove check on dev->dev_privateJani Nikula
There is no real reason to require drivers to set and use dev->dev_private. Indeed, the current recommendation, as documented in drm_device.h, is to embed struct drm_device in the per-device struct instead of using dev_private. Remove the requirement for dev_private to have been set to indicate driver initialization. For background, quoting Daniel Vetter: Now there might be some hilarious races this papers over, but: - Proper drivers should only call drm_dev_register once everything is set up, including this stuff here. No race possible with anything else really. - Slightly more wobbly drivers, including the legacy ones, all use drm_global_mutex. This was the former BKL, which means that it was impossible for soeone to go through the load/unload/reload (between lastclose and firstopen) paths and also run the ioctl. But the ioctl had to be made unlocked because blocking there killed X: commit 8f4ff2b06afcd6f151868474a432c603057eaf56 Author: Ilija Hadzic <ihadzic@research.bell-labs.com> Date: Mon Oct 31 17:46:18 2011 -0400 drm: do not sleep on vblank while holding a mutex The even more legacy DRM_CONTROL ioctl stayed fully locked. But the file open/close paths are still fully locked, and that's the only place legacy drivers should call drm_irq_install/uninstall, so should all still be fully ordered and protected and happy. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211144753.3175-1-jani.nikula@intel.com
2020-02-11ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsiKuninori Morimoto
frame-inversion is "flag" not "uint32". This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-11ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260Patrice Chotard
Remove "snps,phy-bus-name", "snps,phy-bus-id" and "snps,phy-addr" properties which are deprecated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-11ALSA: usb-audio: Fix UAC2/3 effect unit parsingTakashi Iwai
We've got a regression report about M-Audio Fast Track C400 device, and the git bisection resulted in the commit e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()"). This commit was about the rewrite of the input terminal parser, and it's not too obvious from the change what really broke. The answer is: it's the interpretation of UAC2/3 effect units. In the original code, UAC2 effect unit is as if through UAC1 processing unit because both UAC1 PU and UAC2/3 EU share the same number (0x07). The old code went through a complex switch-case fallthrough, finally bailing out in the middle: if (protocol == UAC_VERSION_2 && hdr[2] == UAC2_EFFECT_UNIT) { /* UAC2/UAC1 unit IDs overlap here in an * uncompatible way. Ignore this unit for now. */ return 0; } ... and this special handling was missing in the new code; the new code treats UAC2/3 effect unit as if it were equivalent with the processing unit. Actually, the old code was too confusing. The effect unit has an incompatible unit description with the processing unit, so we shouldn't have dealt with EU in the same way. This patch addresses the regression by changing the effect unit handling to the own parser function. The own parser function makes the clear distinct with PU, so it improves the readability, too. The EU parser just sets the type and the id like the old kernels. Once when the proper effect unit support is added, we can revisit this parser function, but for now, let's keep this simple setup as is. Fixes: e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147 Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-11ceph: noacl mount option is effectively ignoredXiubo Li
For the old mount API, the module parameters parseing function will be called in ceph_mount() and also just after the default posix acl flag set, so we can control to enable/disable it via the mount option. But for the new mount API, it will call the module parameters parseing function before ceph_get_tree(), so the posix acl will always be enabled. Fixes: 82995cc6c5ae ("libceph, rbd, ceph: convert to use the new mount API") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-11ceph: canonicalize server path in placeIlya Dryomov
syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11ceph: do not execute direct write in parallel if O_APPEND is specifiedXiubo Li
In O_APPEND & O_DIRECT mode, the data from different writers will be possibly overlapping each other since they take the shared lock. For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT mode: Writer1 Writer2 shared_lock() shared_lock() getattr(CAP_SIZE) getattr(CAP_SIZE) iocb->ki_pos = EOF iocb->ki_pos = EOF write(data1) write(data2) shared_unlock() shared_unlock() The data2 will overlap the data1 from the same file offset, the old EOF. Switch to exclusive lock instead when O_APPEND is specified. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-11drm/panel: simple: Add Rocktech RK101II01D-CT panelJyri Sarha
Add support for Rocktech RK101II01D-CT, 10.1" 1280x800 TFT with LVDS interface, LED backlight and integrated Goodix GT928 capacitive touch panel. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/b543b77d8af7cbbef852d3df4595f11ac1aa0046.1581423249.git.jsarha@ti.com
2020-02-11dt-bindings: panel-simple: Add rocktech,rk101ii01d-ct compatibleJyri Sarha
Add compatible to panel-simple for Rocktech Displays Limited RK101II01D-CT 10.1" TFT 1280x800 Pixels with LVDS interface, LED Backlight, and capacitive touch panel ("goodix,gt928" compatible). Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/2ffedf45e65943a021ed57a0d174900e43663b27.1581423249.git.jsarha@ti.com
2020-02-11IB/rdmavt: Reset all QPs when the device is shut downKaike Wan
When the hfi1 device is shut down during a system reboot, it is possible that some QPs might have not not freed by ULPs. More requests could be post sent and a lingering timer could be triggered to schedule more packet sends, leading to a crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 IP: [ffffffff810a65f2] __queue_work+0x32/0x3c0 PGD 0 Oops: 0000 1 SMP Modules linked in: nvmet_rdma(OE) nvmet(OE) nvme(OE) dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) pal_raw(POE) pal_pmt(POE) pal_cache(POE) pal_pile(POE) pal(POE) pal_compatible(OE) rpcrdma sunrpc ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_ib sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_ssif pcspkr ses enclosure joydev scsi_transport_sas i2c_i801 sg mei_me lpc_ich mei ioatdma shpchp ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter acpi_pad dm_multipath hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm mlx4_core crct10dif_pclmul crct10dif_common hfi1(OE) igb crc32c_intel rdmavt(OE) ahci ib_core libahci libata ptp megaraid_sas pps_core dca i2c_algo_bit i2c_core devlink dm_mirror dm_region_hash dm_log dm_mod CPU: 23 PID: 0 Comm: swapper/23 Tainted: P OE ------------ 3.10.0-693.el7.x86_64 #1 Hardware name: Intel Corporation S2600CWR/S2600CWR, BIOS SE5C610.86B.01.01.0028.121720182203 12/17/2018 task: ffff8808f4ec4f10 ti: ffff8808f4ed8000 task.ti: ffff8808f4ed8000 RIP: 0010:[ffffffff810a65f2] [ffffffff810a65f2] __queue_work+0x32/0x3c0 RSP: 0018:ffff88105df43d48 EFLAGS: 00010046 RAX: 0000000000000086 RBX: 0000000000000086 RCX: 0000000000000000 RDX: ffff880f74e758b0 RSI: 0000000000000000 RDI: 000000000000001f RBP: ffff88105df43d80 R08: ffff8808f3c583c8 R09: ffff8808f3c58000 R10: 0000000000000002 R11: ffff88105df43da8 R12: ffff880f74e758b0 R13: 000000000000001f R14: 0000000000000000 R15: ffff88105a300000 FS: 0000000000000000(0000) GS:ffff88105df40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000102 CR3: 00000000019f2000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88105b6dd708 0000001f00000286 0000000000000086 ffff88105a300000 ffff880f74e75800 0000000000000000 ffff88105a300000 ffff88105df43d98 ffffffff810a6b85 ffff88105a301e80 ffff88105df43dc8 ffffffffc0224cde Call Trace: IRQ [ffffffff810a6b85] queue_work_on+0x45/0x50 [ffffffffc0224cde] _hfi1_schedule_send+0x6e/0xc0 [hfi1] [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffffc0224d62] hfi1_schedule_send+0x32/0x70 [hfi1] [ffffffffc0170644] rvt_rc_timeout+0xd4/0x120 [rdmavt] [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffff81097316] call_timer_fn+0x36/0x110 [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffff8109982d] run_timer_softirq+0x22d/0x310 [ffffffff81090b3f] __do_softirq+0xef/0x280 [ffffffff816b6a5c] call_softirq+0x1c/0x30 [ffffffff8102d3c5] do_softirq+0x65/0xa0 [ffffffff81090ec5] irq_exit+0x105/0x110 [ffffffff816b76c2] smp_apic_timer_interrupt+0x42/0x50 [ffffffff816b5c1d] apic_timer_interrupt+0x6d/0x80 EOI [ffffffff81527a02] ? cpuidle_enter_state+0x52/0xc0 [ffffffff81527b48] cpuidle_idle_call+0xd8/0x210 [ffffffff81034fee] arch_cpu_idle+0xe/0x30 [ffffffff810e7bca] cpu_startup_entry+0x14a/0x1c0 [ffffffff81051af6] start_secondary+0x1b6/0x230 Code: 89 e5 41 57 41 56 49 89 f6 41 55 41 89 fd 41 54 49 89 d4 53 48 83 ec 10 89 7d d4 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 be 02 00 00 41 f6 86 02 01 00 00 01 0f 85 58 02 00 00 49 c7 c7 28 19 01 00 RIP [ffffffff810a65f2] __queue_work+0x32/0x3c0 RSP ffff88105df43d48 CR2: 0000000000000102 The solution is to reset the QPs before the device resources are freed. This reset will change the QP state to prevent post sends and delete timers to prevent callbacks. Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table") Link: https://lore.kernel.org/r/20200210131040.87408.38161.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-11IB/hfi1: Close window for pq and request colidingMike Marciniszyn
Cleaning up a pq can result in the following warning and panic: WARNING: CPU: 52 PID: 77418 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0 list_del corruption, ffff88cb2c6ac068->next is LIST_POISON1 (dead000000000100) Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff90365ac0>] dump_stack+0x19/0x1b [<ffffffff8fc98b78>] __warn+0xd8/0x100 [<ffffffff8fc98bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff8ff970c3>] __list_del_entry+0x63/0xd0 [<ffffffff8ff9713d>] list_del+0xd/0x30 [<ffffffff8fddda70>] kmem_cache_destroy+0x50/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 PGD 2cdab19067 PUD 2f7bfdb067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 task: ffff88cc26db9040 ti: ffff88b5393a8000 task.ti: ffff88b5393a8000 RIP: 0010:[<ffffffff8fe1f93e>] [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP: 0018:ffff88b5393abd60 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff88cb2c6ac000 RCX: 0000000000000003 RDX: 0000000000000400 RSI: 0000000000000400 RDI: ffffffff9095b800 RBP: ffff88b5393abdb0 R08: ffffffff9095b808 R09: ffffffff8ff77c19 R10: ffff88b73ce1f160 R11: ffffddecddde9800 R12: ffff88cb2c6ac000 R13: 000000000000000c R14: ffff88cf3fdca780 R15: 0000000000000000 FS: 00002aaaaab52500(0000) GS:ffff88b73ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000002d27664000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: [<ffffffff8fe20d44>] __kmem_cache_shutdown+0x14/0x80 [<ffffffff8fddda78>] kmem_cache_destroy+0x58/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 Code: 00 00 ba 00 04 00 00 0f 4f c2 3d 00 04 00 00 89 45 bc 0f 84 e7 01 00 00 48 63 45 bc 49 8d 04 c4 48 89 45 b0 48 8b 80 c8 00 00 00 <48> 8b 78 10 48 89 45 c0 48 83 c0 10 48 89 45 d0 48 8b 17 48 39 RIP [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP <ffff88b5393abd60> CR2: 0000000000000010 The panic is the result of slab entries being freed during the destruction of the pq slab. The code attempts to quiesce the pq, but looking for n_req == 0 doesn't account for new requests. Fix the issue by using SRCU to get a pq pointer and adjust the pq free logic to NULL the fd pq pointer prior to the quiesce. Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/20200210131033.87408.81174.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-11IB/hfi1: Acquire lock to release TID entries when user file is closedKaike Wan
Each user context is allocated a certain number of RcvArray (TID) entries and these entries are managed through TID groups. These groups are put into one of three lists in each user context: tid_group_list, tid_used_list, and tid_full_list, depending on the number of used TID entries within each group. When TID packets are expected, one or more TID groups will be allocated. After the packets are received, the TID groups will be freed. Since multiple user threads may access the TID groups simultaneously, a mutex exp_mutex is used to synchronize the access. However, when the user file is closed, it tries to release all TID groups without acquiring the mutex first, which risks a race condition with another thread that may be releasing its TID groups, leading to data corruption. This patch addresses the issue by acquiring the mutex first before releasing the TID groups when the file is closed. Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs") Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-11RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_createKamal Heib
Make sure to free the allocated cpumask_var_t's to avoid the following reported memory leak by kmemleak: $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8897f812d6a8 (size 8): comm "kworker/1:1", pid 347, jiffies 4294751400 (age 101.703s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<00000000bff49664>] alloc_cpumask_var_node+0x4c/0xb0 [<0000000075d3ca81>] hfi1_comp_vectors_set_up+0x20f/0x800 [hfi1] [<0000000098d420df>] hfi1_init_dd+0x3311/0x4960 [hfi1] [<0000000071be7e52>] init_one+0x25e/0xf10 [hfi1] [<000000005483d4c2>] local_pci_probe+0xd4/0x180 [<000000007c3cbc6e>] work_for_cpu_fn+0x51/0xa0 [<000000001d626905>] process_one_work+0x8f0/0x17b0 [<000000007e569e7e>] worker_thread+0x536/0xb50 [<00000000fd39a4a5>] kthread+0x30c/0x3d0 [<0000000056f2edb3>] ret_from_fork+0x3a/0x50 Fixes: 5d18ee67d4c1 ("IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support") Link: https://lore.kernel.org/r/20200205110530.12129-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-11drm/i915/selftests: Relax timeout for error-interrupt reset processingChris Wilson
We can not require that the system process a tasklet in reasonable time (thanks be to ksoftirqd), but we can insist that having waited sufficiently for the error interrupt to have been raised and having kicked the tasklet, the reset has begun and the request will be marked as in error (if not already completed). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200210205722.794180-3-chris@chris-wilson.co.uk
2020-02-11drm: Nerf drm_global_mutex BKL for good driversDaniel Vetter
This catches the majority of drivers (unfortunately not if we take users into account, because all the big drivers have at least a lastclose hook). With the prep patches out of the way all drm state is fully protected and either prevents or can deal with the races from dropping the BKL around open/close. The only thing left to audit are the various driver hooks - by keeping the BKL around if any of them are set we have a very simple cop-out! Note that one of the biggest prep pieces to get here was making dev->open_count atomic, which was done in commit 7e13ad896484a0165a68197a2e64091ea28c9602 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jan 24 13:01:07 2020 +0000 drm: Avoid drm_global_mutex for simple inc/dec of dev->open_count v2: - Rebase and fix locking in drm_open() (Chris) - Indentation fix in drm_release - Typo fix in the commit message (Sam) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-6-daniel.vetter@ffwll.ch
2020-02-11drm: Push drm_global_mutex locking in drm_openDaniel Vetter
We want to only take the BKL on crap drivers, but to know whether we have a crap driver we first need to look it up. Split this shuffle out from the main BKL-disabling patch, for more clarity. Historical aside: When the kernel-wide BKL was removed, it was replaced by drm_global_mutex within the scope of the drm subsystem hence why these two things are (almost) interchangeable as concepts here. Since the minors are refcounted drm_minor_acquire is purely internal and this does not have a driver visible effect. v2: Push the locking even further into drm_open(), suggested by Chris. This gives us more symmetry with drm_release(), and maybe a futuer avenue where we make drm_global_mutex locking (partially) opt-in like with drm_release_noglobal(). v3: - Actually push this stuff correctly, don't unlock twice (Chris) - Fix typo on commit message, plus explain why BKL = drm_global_mutex (Sam) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-5-daniel.vetter@ffwll.ch
2020-02-11drm/client: Rename _force to _lockedDaniel Vetter
Plus extend the kerneldoc a bit to explain how this should be used. With the previous patch to drop the force restore the main user of this function is not emphasis on the "I hold the internal master lock already" aspect, so rename the function to match. Suggested by Noralf. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-4-daniel.vetter@ffwll.ch
2020-02-11drm/fbdev-helper: don't force restoresDaniel Vetter
Instead check for master status, in case we've raced. This is the last exception to the general rule that we restore fbcon only when there's no master active. Compositors are supposed to drop their master status before they switch to a different console back to text mode (or just switch to text mode directly, without a vt switch). This is known to break some subtests of kms_fbcon_fbt in igt, but they're just wrong - it does a graphics/text mode switch for the vt without updating the master status. Also add a comment to the drm_client->restore hook that this is expected going forward from all clients (there's currently just one). v2: Also drop the force in pan_display v3: Restore the _force to pan_display, this actually means _locked in that path. Spotted by Noralf. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204150146.2006481-3-daniel.vetter@ffwll.ch
2020-02-11drm/ttm: use RCU in ttm_bo_flush_all_fencesChristian König
This allows it to call the function without the lock held. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: xinhui pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/352742/
2020-02-11drm/ttm: cleanup ttm_buffer_object_transferChristian König
The function is always called with deleted BOs. While at it cleanup the indentation as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: xinhui pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/352743/
2020-02-11drm/i915/dpio_phy: convert to drm_device based logging macros.Wambui Karuga
Conversion of the printk based logging macros to the struct drm_device based logging macros in i915/display/intel_dpio_phy.c. This was achieved using the following coccinelle semantic patch that matches based on the existence of a drm_i915_private device: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Note that this converts both DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg(). Checkpatch warnings were fixed manually. References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-13-wambui.karugax@gmail.com
2020-02-11drm/ttm: refine ghost BO resv criteriaChristian König
Ghost BOs need to stick with the resv object only when the origin is imported. This is a low hanging fruit to avoid OOM situations on evictions. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: xinhui pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/352740/
2020-02-11drm/i915/dsi_vbt: convert to drm_device based logging macros.Wambui Karuga
Convert various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_dsi_vbt.c. This also involves extracting the drm_i915_private device from the intel_dsi type for use in the logging macros. This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-11-wambui.karugax@gmail.com
2020-02-11drm/i915/combo_phy: convert to struct drm_device logging macros.Wambui Karuga
Conversion of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_combo_phy.c. This transformation was achieved using the following coccinelle script that matches based on the existence of a drm_i915_private device pointer: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } This converts DRM_DEBUG/DRM_DEBUG_DRIVER to drm_dbg(). New checkpatch warnings were addressed manually. References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-9-wambui.karugax@gmail.com
2020-02-11drm/i915/dpll_mgr: convert to drm_device based logging macros.Wambui Karuga
Conversion of instances of printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_dpll_mgr.c. This also involves extracting the struct drm_i915_private device pointer from various intel types to use in the drm_device based macros. Note that this converts DRM_DEBUG_DRIVER to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-8-wambui.karugax@gmail.com
2020-02-11drm/i915/crt: automatic conversion to drm_device based logging macros.Wambui Karuga
Replaces various instances of the printk based logging macros with the struct drm_device based logging macros in i915/display/intel_crt.c using the following coccinelle script that matches based on the existence of a drm_i915_private device pointer: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Checkpatch warnings were addressed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206080014.13759-6-wambui.karugax@gmail.com
generated by cgit (git 2.34.1) at 2025-10-02 10:07:25 +0000