summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-19squeeze max-pause area and drop pass-good areaWu Fengguang
Revert the pass-good area introduced in ffd1f609ab10 ("writeback: introduce max-pause and pass-good dirty limits") and make the max-pause area smaller and safe. This fixes ~30% performance regression in the ext3 data=writeback fio_mmap_randwrite_64k/fio_mmap_randrw_64k test cases, where there are 12 JBOD disks, on each disk runs 8 concurrent tasks doing reads+writes. Using deadline scheduler also has a regression, but not that big as CFQ, so this suggests we have some write starvation. The test logs show that - the disks are sometimes under utilized - global dirty pages sometimes rush high to the pass-good area for several hundred seconds, while in the mean time some bdi dirty pages drop to very low value (bdi_dirty << bdi_thresh). Then suddenly the global dirty pages dropped under global dirty threshold and bdi_dirty rush very high (for example, 2 times higher than bdi_thresh). During which time balance_dirty_pages() is not called at all. So the problems are 1) The random writes progress so slow that they break the assumption of the max-pause logic that "8 pages per 200ms is typically more than enough to curb heavy dirtiers". 2) The max-pause logic ignored task_bdi_thresh and thus opens the possibility for some bdi's to over dirty pages, leading to (bdi_dirty >> bdi_thresh) and then (bdi_thresh >> bdi_dirty) for others. 3) The higher max-pause/pass-good thresholds somehow leads to the bad swing of dirty pages. The fix is to allow the task to slightly dirty over task_bdi_thresh, but no way to exceed bdi_dirty and/or global dirty_thresh. Tests show that it fixed the JBOD regression completely (both behavior and performance), while still being able to cut down large pause times in balance_dirty_pages() for single-disk cases. Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-08-19ARM: S5P: fix bug in spdif_clk_get_rateNaveen Krishna Chatradhi
Should be passing the parent clk object when calling for parent rate. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: Add restart hook for proper rebootKyungmin Park
This is required to use SWRESET. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: Increase reset delay for USB HOST PHYYulgon Kim
This patch increases reset delay from 50 usec to 80 usec for USB HOST PHY. In order to reset USB HOST PHY controller properly, a little extra time is required during its reset cycle. Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: S5P: add required chained_irq_enter/exit to gpio-int codeMarek Szyprowski
This patch adds chained IRQ enter/exit functions to gpio interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: add required chained_irq_enter/exit to eint codeMarek Szyprowski
This patch adds chained IRQ enter/exit functions to external interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handlerMarek Szyprowski
This patch adds chained IRQ enter/exit functions to timer interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: S3C64XX: Fix build break in PM debugAbhilash Kesavan
When S3C_PM_DEBUG_LED_SMDK is enabled for suspend/resume debugging, the following compilation error occurs: arch/arm/mach-s3c64xx/pm.c: In function 's3c_pm_debug_smdkled': arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'gpio_set_value' arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'S3C64XX_GPN' arch/arm/mach-s3c64xx/pm.c: In function 's3c64xx_pm_init': arch/arm/mach-s3c64xx/pm.c:184: error: implicit declaration of function 'gpio_request' arch/arm/mach-s3c64xx/pm.c:188: error: implicit declaration of function 'gpio_direction_output' Fix the error by including linux/gpio.h Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: S5PV210: Fix build warningAbhilash Kesavan
Fixed the following warning for S5PV210. arch/arm/mach-s5pv210/pm.c: In function 's5pv210_pm_add': arch/arm/mach-s5pv210/pm.c:139: warning: assignment from incompatible pointer type Also, staticized the function. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS deviceSylwester Nawrocki
This is a regression fix after migration to the external GIC. The breakage has been introduced in commit 69644a8e23ab ("ARM: EXYNOS4: modify interrupt mappings for external GIC") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: added commit id] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: remove duplicated inclusionHuang Weiyi
Remove duplicated #include('s) in arch/arm/mach-exynos4/cpu.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: Fix wrong devname to support clkdevJonghwan Choi
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: EXYNOS4: Use the correct regulator names on universal_c210Kyungmin Park
Use the correct regulator names for cpufreq Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set()Kukjin Kim
WARNING: vmlinux.o(.text+0xf47c): Section mismatch in reference from the function samsung_bl_set() to the (unknown reference) .init.data:(unknown) The function samsung_bl_set() references the (unknown reference) __initdata (unknown). This is often because samsung_bl_set lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit()Kukjin Kim
According to commit 659fb32d1b67476f4ade25e9ea0e2642a5b9c4b5 ("replace irq_gc_ack() with {set,clr}_bit variants"), this should be fixed. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONSDaniel Baluta
IPV6_2292PKTOPTIONS is broken for 32-bit applications running in COMPAT mode on 64-bit kernels. The same problem was fixed for IPv4 with the patch: ipv4: Fix ip_getsockopt for IP_PKTOPTIONS, commit dd23198e58cd35259dd09e8892bbdb90f1d57748 Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDERAxel Lin
Since commit 8560a6cfc9818edde1fd8677961714b264ffa03d "arm: Footbridge: Use common i8253 clockevent", ARCH_NETWINDER needs to select CLKEVT_I8253. This patch fixes below build error with "make netwinder_defconfig". LD .tmp_vmlinux1 arch/arm/mach-footbridge/built-in.o: In function `isa_timer_init': isa-rtc.c:(.init.text+0x12c8): undefined reference to `clockevent_i8253_init' isa-rtc.c:(.init.text+0x12d0): undefined reference to `i8253_clockevent' arch/arm/mach-footbridge/built-in.o:(.data+0x198): undefined reference to `i8253_clockevent' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-19Revert "cfq: Remove special treatment for metadata rqs."Jens Axboe
We have a kernel build regression since 3.1-rc1, which is about 10% regression. The kernel source is in an ext3 filesystem. Alex Shi bisect it to commit: commit a07405b7802691d29ab3b23bdc76ee6d006aad0b Author: Justin TerAvest <teravest@google.com> Date: Sun Jul 10 22:09:19 2011 +0200 cfq: Remove special treatment for metadata rqs. Apparently this is caused by lack metadata preemption, where ext3/ext4 do use READ_META. I didn't see a way to fix the issue, so suggest reverting the patch. This reverts commit a07405b7802691d29ab3b23bdc76ee6d006aad0b. Reported-by: Alex Shi<alex.shi@intel.com> Reported-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19ALSA: usb-audio - Fix missing mixer dB informationTakashi Iwai
The recent fix for testing dB range at the mixer creation time seems to cause regressions in some devices. In such devices, reading the dB info at probing time gives an error, thus both dBmin and dBmax are still zero, and TLV flag isn't set although the later read of dB info succeeds. This patch adds a workaround for such a case by assuming that the later read will succeed. In future, a similar test should be performed in a case where a wrong dB range is seen even in the later read. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix array bounds error setting up PCIC NMI trap
2011-08-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/sata_dwc_460ex.c: add missing kfree ata: Add iMX pata support pata_via: disable ATAPI DMA on AVERATEC 3200 [libata] sata_sil: fix used-uninit warning
2011-08-18Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets NFSv4.1: Fix the callback 'highest_used_slotid' behaviour pnfs-obj: Fix the comp_index != 0 case pnfs-obj: Bug when we are running out of bio nfs: add missing prefetch.h include
2011-08-18sparc: fix array bounds error setting up PCIC NMI trapIan Campbell
CC arch/sparc/kernel/pcic.o arch/sparc/kernel/pcic.c: In function 'pcic_probe': arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds] cc1: all warnings being treated as errors I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: netdev-features.txt update to Documentation/networking/00-INDEXWillem de Bruijn
Update netdev-features.txt entry in 00-INDEX to incorporate feedback by Michał Mirosław. v2: restored tabs that were inadvertently changed to spaces in v1. sorry for the error. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18vlan: reset headers on accel emulation pathJiri Pirko
It's after all necessary to do reset headers here. The reason is we cannot depend that it gets reseted in __netif_receive_skb once skb is reinjected. For incoming vlanids without vlan_dev, vlan_do_receive() returns false with skb != NULL and __netif_reveive_skb continues, skb is not reinjected. This might be good material for 3.0-stable as well Reported-by: Mike Auty <mike.auty@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18drivers/ata/sata_dwc_460ex.c: add missing kfreeJulia Lawall
Currently, error handling code in this function calls the function sata_dwc_port_stop, but this function has essentially no effect if hsdevp has not been stored in ap, which is the case throughout this function. The only effect is to print a debugging message including ap->print_id. The code is rewritten to not call sata_dwc_port_stop, but instead to jump to a local label that prints the original error message and the print_id information. In the case where hsdevp has been already allocated (but not yet stored in ap), this value is freed as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18ata: Add iMX pata supportArnaud Patard (Rtp)
Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18pata_via: disable ATAPI DMA on AVERATEC 3200Tejun Heo
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA, which often leads to random kernel oops. The cause of the problem is not well understood yet and only small subset of machines using the controller seem affected. Blacklist ATAPI DMA on the machine. Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426 Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18[libata] sata_sil: fix used-uninit warningJeff Garzik
Init 'serror' to silence the following warning: drivers/ata/sata_sil.c: In function ‘sil_interrupt’: drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in this function [-Wuninitialized] This is not a 'can never happen' but is nonetheless extremely unlikely. The easiest and cleanest warning fix is simply to init the var, rather than worry about marking the var uninit-ok. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: set i_size properly when fallocating and we already btrfs: unlock on error in btrfs_file_llseek() btrfs: btrfs_permission's RO check shouldn't apply to device nodes Btrfs: truncate pages from clone ioctl target range Btrfs: fix uninitialized sync_pending Btrfs: fix wrong free space information btrfs: memory leak in btrfs_add_inode_defrag() Btrfs: use plain page_address() in header fields setget functions Btrfs: forced readonly when btrfs_drop_snapshot() fails Btrfs: check if there is enough space for balancing smarter Btrfs: fix a bug of balance on full multi-disk partitions Btrfs: fix an oops of log replay Btrfs: detect wether a device supports discard Btrfs: force unplugs when switching from high to regular priority bios
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: update cifs version to 1.75 [CIFS] possible memory corruption on mount cifs: demote cERROR in build_path_from_dentry to cFYI
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Support iSCSI PDU padding IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long) IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: fat16 support maximum 4GB file/vol size as WinXP or 7. fat: fix utf8 iocharset warning message fat: fix build warning
2011-08-18irqdesc: fix new kernel-doc warningRandy Dunlap
Fix kernel-doc warning in irqdesc.c: Warning(kernel/irq/irqdesc.c:353): No description found for parameter 'owner' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18i7core_edac: fixed typo in error count calculationMathias Krause
Based on a patch from the PaX Team, found during a clang analysis pass. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: PaX Team <pageexec@freemail.hu> Cc: stable@kernel.org [v2.6.35+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
2011-08-18update cifs version to 1.75Steve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-08-18[CIFS] possible memory corruption on mountSteve French
CIFS cleanup_volume_info_contents() looks like having a memory corruption problem. When UNCip is set to "&vol->UNC[2]" in cifs_parse_mount_options(), it should not be kfree()-ed in cleanup_volume_info_contents(). Introduced in commit b946845a9dc523c759cae2b6a0f6827486c3221a Signed-off-by: J.R. Okajima <hooanon05@yahoo.co.jp> Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-08-19ASoC: omap: Fix build errors in ams-deltaJarkko Nikula
Fix "error: too few arguments to function 'ams_delta_set_bias_level'" build errors in ams-delta.c that were introduced after commit d4c6005 ("ASoC: Add context parameter to card DAPM callbacks") by adding dapm context to ams_delta_set_bias_level calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-18Merge branch 'btrfs-3.0' into for-linusChris Mason
2011-08-18Btrfs: set i_size properly when fallocating and we alreadyJosef Bacik
xfstests exposed a problem with preallocate when it fallocates a range that already has an extent. We don't set the new i_size properly because we see that we already have an extent. This isn't right and we should update i_size if the space already exists. With this patch we now pass xfstests 075. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18btrfs: unlock on error in btrfs_file_llseek()Dan Carpenter
There were some unlocks on error missing in a recent patch to btrfs_file_llseek(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18btrfs: btrfs_permission's RO check shouldn't apply to device nodesJeff Mahoney
This patch tightens the read-only access checks in btrfs_permission to match the constraints in inode_permission. Currently, even though the device node itself will be unmodified, read-write access to device nodes is denied to when the device node resides on a read-only subvolume or a is a file that has been marked read-only by the btrfs conversion utility. With this patch applied, the check only affects regular files, directories, and symlinks. It also restructures the code a bit so that we don't duplicate the MAY_WRITE check for both tests. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18ALSA: hda - Add "PCM" volume to vmaster slave listTakashi Iwai
The new parser may use "PCM" volume, but it was missing the vmaster slave list, thus "Master" volume didn't control it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=41342 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-18perf tools: Add group event scheduling option to perf record/statLin Ming
Group event scheduling command line option is missing in perf record/stat. Add it to perf record/stat, which is same as in perf top. Reported-by: Andi Kleen <andi@firstfloor.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1313577727.2754.5.camel@hp6530s Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18MAINTAINERS: Fix list of perf events source filesGeunsik Lim
Recent changes made kernel/perf_event.c be split and moved to kernel/events/. Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Kosina <trivial@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1313653497-27263-1-git-send-email-leemgs1@gmail.com Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf tools: Fix build against newer glibcJosh Boyer
Upstream glibc commit 295e904 added a definition for __attribute_const__ to cdefs.h. This causes the following error when building perf: util/include/linux/compiler.h:8:0: error: "__attribute_const__" redefined [-Werror] /usr/include/sys/cdefs.h:226:0: note: this is the location of the previous definition Wrap __attribute_const__ in #ifndef as we do for __always_inline. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110818113720.GL2227@zod.bos.redhat.com Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf tools: Fix error handling of unknown eventsStephane Eranian
There was a problem with the parse_events() code not printing the correct event name when an event was unknown and starting with an 'r'. The source of the problem was the way raw notation was parsed. Without the patch: $ perf stat -e retired_foo invalid event modifier: 'tired_foo' With the patch: $ perf stat -e retired_foo invalid or unsupported event: 'retired_foo' This also covers the case where the name of the event was not printed at all when perf was linked with libpfm4. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110723021043.GA20178@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf evlist: Fix missing event name init for default eventStephane Eranian
When no event is given to perf record, perf top, a default event is initialized (cycles). However, perf_evlist__add_default() was not setting the symbolic name for the event. Perf top worked simply because it was reconstructing the name from the event code. But it should not have to do this. This patch initializes the evsel->name field properly. This second version improves the code flow on the non error path. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110607161936.GA8163@quad Signed-off-by: Stephane Eranian <eranian@google.com> [committer note: Use perf_evsel__delete() instead of plain free()] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf list: Fix exit valueStephane Eranian
This patch fixes an issue with the exit value of perf list: $ perf list; echo $? 129 perf list returns an error exit code even though there is no error. There was a stray exit(129) in print_events(). This patch removes this exit(). $ perf list; echo $? 0 $ perf list hw sw cpu-cycles OR cycles [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] alignment-faults [Software event] emulation-faults [Software event] $ echo $? 0 Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110523123917.GA31060@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 08:35:24 +0000