summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-27wm8350-regulator: fix wm8350_register_regulator error handlingAxel Lin
In the case of platform_device_add() fail, we should call platform_device_put() instead of platform_device_del() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27ab3100: fix off-by-one value range checking for voltage selectorAxel Lin
We use voltage selector as an array index for typ_voltages. Thus the valid range for voltage selector should be 0..voltages_len-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27ARM: LPC32XX: GPIO, timer, and IRQ driversKevin Wells
Common drivers for the LPC32XX used on all platforms Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Clock driverKevin Wells
Clock driver for the LPC32XX architecture Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Debug and IRQ macrosKevin Wells
Debug (printascii) and IRQ handler macros for the LPC32XX arch Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: LPC32XX: Initial arch header filesKevin Wells
Header files for the LPC32xx arch Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-27ARM: 6239/1: mmci: let core poll for card detectionRabin Vincent
Use the MMC core's ability to poll for card detection. This also has the advantage of doing the gpio_get_value from a workqueue instead of timer, allowing the gpio to be on a sleeping gpiochip. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6238/1: mmci: fix multi block transfersRabin Vincent
Fix the data transfer size to allow multi block transfers to work. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handlingRabin Vincent
The mmci driver's SG list iteration logic assumes that each SG entry spans only one page, and only maps and flushes one page of the sg. This is not a valid assumption. Fix it by converting the driver to the sg_miter API, which correctly handles sgs which span multiple pages. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Fix section build warnings for AMBA driversRussell King
Found in the Versatile build: WARNING: drivers/built-in.o(.data+0x14c): Section mismatch in reference from the variable pl061_gpio_driver to the (unknown reference) .init.data:(unknown) The variable pl061_gpio_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x40f8): Section mismatch in reference from the variable pl011_driver to the (unknown reference) .init.data:(unknown) The variable pl011_driver references the (unknown reference) __initdata (unknown) WARNING: drivers/built-in.o(.data+0x5ab4): Section mismatch in reference from the variable pl031_driver to the (unknown reference) .init.data:(unknown) The variable pl031_driver references the (unknown reference) __initdata (unknown) Basically, amba_id structures must not be __initdata. Also fix: WARNING: drivers/built-in.o(.data+0x138): Section mismatch in reference from the variable pl061_gpio_driver to the function .init.text:pl061_probe() The variable pl061_gpio_driver references the function __init pl061_probe() which is an incorrectly annotated probe function. Fix it to reflect the other AMBA bus probe functions by removing the __init attributation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: call machine_shutdown() from machine_halt(), etcRussell King
x86 calls machine_shutdown() from the various machine_*() calls which take the machine down ready for halting, restarting, etc, and uses this to bring the system safely to a point where those actions can be performed. Such actions are stopping the secondary CPUs. So, change the ARM implementation of these to reflect what x86 does. This solves kexec problems on ARM SMP platforms, where the secondary CPUs were left running across the kexec call. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: SMP: Always enable clock event broadcast supportRussell King
The TWD local timers are unable to wake up the CPU when it is placed into a low power mode, eg. C3. Therefore, we need to adapt things such that the TWD code can cope with this. We do this by always providing a broadcast tick function, and marking the fact that the TWD local timer will stop in low power modes. This means that when the CPU is placed into a low power mode, the core timer code marks this fact, and allows an IPI to be given to the core. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2010-07-27ARM: Factor out common code from cpu_proc_fin()Russell King
All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as Access Flag faultKirill A. Shutemov
Statuses 3 (0b00011) and 6 (0x00110) of DFSR are Access Flags faults on ARMv6K and ARMv7. Let's patch fsr_info[] at runtime if we are on ARMv7 or later. Unfortunately, we don't have runtime check for 'K' extension, so we can't check for it. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6256/1: Check arch version and modify fsr_info[] depends on it at runtimeKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6255/1: Workaround infinity loop in handling of translation faultsKirill A. Shutemov
On ARM one Linux PGD entry contains two hardware entries (see page tables layout in pgtable.h). We normally guarantee that we always fill both L1 entries. But create_mapping() doesn't follow the rule. It can create inidividual L1 entries, so here we have to call pmd_none() check in do_translation_fault() for the entry really corresponded to address, not for the first of pair. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6269/1: Add 'code' parameter for hook_fault_code()Kirill A. Shutemov
Add one more parameter to hook_fault_code() to be able to set 'code' field of struct fsr_info. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILLKirill A. Shutemov
POSIX specify to use signal SIGBUS with code BUS_ADRALN for invalid address alignment. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6251/1: Make SPARSE_IRQ a hidden optioneric miao
SPARSE_IRQ doesn't need to be a visible option, only those platforms supporting that will select it. Signed-off-by: Eric Miao <eric.miao@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: DMA coherent allocator: align remapped addressesRussell King
The DMA coherent remap area is used to provide an uncached mapping of memory for coherency with DMA engines. Currently, we look for any free hole which our allocation will fit in with page alignment. However, this can lead to fragmentation of the area, and allows small allocations to cross L1 entry boundaries. This is undesirable as we want to move towards allocating sections of memory. Align allocations according to the size, limiting the alignment between the page and section sizes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: use generic ioremap_page_range()Russell King
We don't need our own implementation of this, use the generic library implementation instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivativeLinus Walleij
Implementation of the ST-Ericsson baudrate extension in the PL011 block. In this modified variant it is possible to change the sampling factor from 16 to 8, and thanks to this we can get higher baudrates while still using the same peripheral clock. Also replace the simple division to determine the baud divisor with DIV_ROUND_CLOSEST() rather than a simple integer division. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivativeLinus Walleij
In the ST-Ericsson version of the PL011 the TX and RX have different control registers. Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6213/1: atomic64_test: add ARM as supported architectureWill Deacon
ARM has support for the atomic64_dec_if_positive operation so ensure that it is tested by the atomic64_test routine. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27Merge branch 'origin' into miscRussell King
2010-07-27ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Versatile: fix section mismatchRussell King
WARNING: vmlinux.o(.text+0xbf38): Section mismatch in reference from the function pci_versatile_scan_bus() to the function .devinit.text:pci_scan_bus_parented() The function pci_versatile_scan_bus() references the function __devinit pci_scan_bus_parented(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Remove unnecessary call to find_limits()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: convert pfn_valid to use LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: LMB: Convert arm_memory_present() to use LMB memory informationRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMBRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: Convert platform reservations to use LMB rather than bootmemRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: initial LMB trialRussell King
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: early_pte_alloc()Russell King
Provide a common function for allocating early PTE tables. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6267/1: mop500: add AB8500 interrupt supportRabin Vincent
Add the platform data to enable AB8500 interrupt support. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26e1000: use netif_<level> instead of netdev_<level>Emil Tantilov
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 675ad47375c76a7c3be4ace9554d92cd55518ced Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26usbnet: use jiffies in schedule_timeout(), not msecsKulikov Vasiliy
usbnet_terminate_urbs() uses schedule_timeout() with argument 3 msecs. schedule_timeout() uses jiffies as argument, so convert msecs to jiffies with msecs_to_jiffies(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ks8842: Support 100Mbps when accessed via timberdaleRichard Röjfors
This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26caif: handle snprintf() returnDan Carpenter
snprintf() returns the number of bytes that would have been written. It can be larger than the size of the buffer. The current code won't overflow, but people cut and paste this stuff so lets do it right and also make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26genetlink: use genl_register_family_with_ops()Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drop_monitor: use genl_register_family_with_ops()Changli Gao
[ Fix unused local variable build warnings. -DaveM ] Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26genetlink: cleanup code according to CodingStyleChangli Gao
If the function is exported, the EXPORT* macro for it should follow immediately after the closing function brace line. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/netlink/genetlink.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ethoc: add devinit/devexit section initializersJonas Bonn
Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: restore EEPROM values of MDICNFG on reset with 82580Nick Nunley
On a reset the MDICNFG.Destination and MDICNFG.COM_MDIO register fields are not restored to the EEPROM default. This patch modifies the reset code to read the EEPROM and restore the default values. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26igb: add support for SGMII-based MDIO PHYsNick Nunley
This patch adds support for external MDIO PHYs, in addition to the standard SFP support for SGMII PHYs over the I2C interface. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26e1000e: Drop a useless statementJean Delvare
err is set again a few lines below. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Do not try to disable hpet if it hasn't been initialized before x86, i8259: Only register sysdev if we have a real 8259 PIC
2010-07-26s2io: fixing DBG_PRINT() macroBreno Leitao
Patch 9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the DBG_PRINT() macro and the if clause was wrongly changed. It means that currently all the DBG_PRINT are being printed, flooding the kernel log buffer with things like: s2io: eth6: Next block at: c0000000b9c90000 s2io: eth6: In Neterion Tx routine Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
2010-07-26Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Set io_map_base for several PCI bridges lacking it MIPS: Alchemy: Define eth platform devices in the correct order MIPS: BCM63xx: Prevent second enet registration on BCM6338 MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations. MIPS: N32: Define getdents64. MIPS: MTX-1: Fix PCI on the MeshCube and related boards MIPS: Make init_vdso a subsys_initcall. MIPS: "Fix" useless 'init_vdso successfully' message. MIPS: PowerTV: Move register setup to before reading registers. SOUND: Au1000: Fix section mismatch VIDEO: Au1100fb: Fix section mismatch VIDEO: PMAGB-B: Fix section mismatch VIDEO: PMAG-BA: Fix section mismatch NET: declance: Fix section mismatches VIDEO. gbefb: Fix section mismatches.
generated by cgit (git 2.34.1) at 2025-09-23 08:13:15 +0000