summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-26mx5: Register i2c on Freescale MX51 Babbage HWDinh Nguyen
Add device registration and setup IOMUX pins in the mx51_babbage board feil. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx5: Add i2c to Freescale MX51 Babbage HWDinh Nguyen
This patch adds I2C functionality to the Freescale MX51 Babbage HW. The patch adds device structures, i2c board slave device defines, IOMUX pin defines, and clocks. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26arm: mxc: utilise usecount field in clock operationsAmit Kucheria
This patch fixes the clock refcounting when reparenting is used. Boot-tested on imx51 babbage board. Sascha pointed out a good explanation of refcounting here: http://www.spinics.net/lists/arm-kernel/msg85879.html Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25pdk: add keypad supportBaruch Siach
The keymap is taken from the Freescale supplied kernel. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add platform code for imx-keypadBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc_nand: add support for platform defined partitionsBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc_nand: Fix OOB handlingSascha Hauer
The OOB handling in the mxc_nand driver is broken for v1 type controllers (i.MX27/31) with 512 byte page size. This perhaps did not show up because ubi does not use OOB. Update the driver to always read/write a whole page even if only OOB is requested. With this patch the driver passes the mtd_oobtest on i.MX27 with 512 byte page size. Also tested with 2048 byte page size and on i.MX35 (v2 type controller) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reported-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Baruch Siach <baruch@tkos.co.il>
2010-07-26eukrea_mbimx27: add audio codecEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: add support for the keyboardEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26MX2X: Add Keypad device definition for MX2X archEric Bénard
Based on work from Alberto Panizzo for MX3X Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: use card detect through DAT3 for SDHC1Eric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxcmmc: add card detect through DAT3 possibilityEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: register wdt and w1_master resourcesEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: add USB Host2 and OTG supportEric Bénard
support copied from mach-pca100.c Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: fix ADS7846 supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: fix QuadUART's IRQ typo in pins'setupEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usageEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27-baseboard: add timings for DVI outputEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controlsEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27-baseboard: fix typo in display nameEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26pcm037/pcm043/pca100: fix ULPI-related build warningsWolfram Sang
Like this one (if CONFIG_USB_ULPI is not set): arch/arm/mach-mx3/mach-pcm043.c:312: warning: 'otg_pdata' defined but not used arch/arm/mach-mx3/mach-pcm043.c:317: warning: 'usbh1_pdata' defined but not used Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pinDaniel Mack
This makes the resistive touch interface work. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26ARM: Fix csum_partial_copy_from_user()Russell King
Using the parent functions frame pointer to access our arguments is completely wrong, whether or not we're building with frame pointers or not. What we should be using is the stack pointer to get at the word above the registers we stacked ourselves. Reported-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Tested-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: fix build warning in asm/elf.hRussell King
CC kernel/elfcore.o In file included from include/linux/elf.h:7, from kernel/elfcore.c:1: arch/arm/include/asm/elf.h:124: warning: 'struct mm_struct' declared inside parameter list arch/arm/include/asm/elf.h:124: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500Rabin Vincent
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6264/1: fix Versatile Express LED oversightLinus Walleij
My attempt to make the LEDs only compile for RealView and Versatile was futile: I missed the Versatile Express. So invert the logic and explicitly include the platforms to compile for. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6235/2: driver for the LEDs found in the later ARM refdesignsLinus Walleij
This adds a simple driver supporting the new LED framework with triggers and all for the RealView and Versatile platforms. The RealView and Versatile platform drivers were arranged to compile for all-but-integrator as a side effect since the Integrator has a different LED driver. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6214/2: driver for the character LCD found in ARM refdesignsLinus Walleij
This adds a driver for the character LCD found on the ARM Versatile and RealView Platform Baseboards. It doesn't do very much more than display the text "ARM Linux" on the first line and the linux banner on the second line, but that's still useful. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.textUwe Kleine-König
qnap_tsx1x_register_flash is only called by qnap_ts219_init and qnap_ts41x_init which both live in .init.text, too. So the move is OK. This fixes the following warning in kirkwood_defconfig: WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info The function qnap_tsx1x_register_flash() references the variable __initdata qnap_tsx1x_spi_slave_info. This is often because qnap_tsx1x_register_flash lacks a __initdata annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6263/1: ns9xxx: fix FTBFS for zImageUwe Kleine-König
the different putc variants used an initialized local static variable which is broken since 5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack) This needs to be initialized at runtime and so needs to be global. While at it give it a better name. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6262/1: arm/clps711x: fix debug macro compilation failureJeremy Kerr
We need mach/hardware.h for CLPS7111_VIRT_BASE. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6261/1: arm/shark: fix debug macro compilation failureJeremy Kerr
We need a waituart macro. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6260/1: arm/plat-spear: fix debug macro compilation failureJeremy Kerr
mov rx, =<immediate> isn't valid, use #<immediate> instead. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failureJeremy Kerr
We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6258/1: arm/h720x: fix debug macro compilation failureJeremy Kerr
IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need mach/hardware.h for these definitions. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26Input: adp5588-keys - export unused GPIO pinsXiaolong Chen
This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-26Input: xpad - add product ID for Hori Fighting Stick EX2Chris Merrett
Signed-off-by: Chris Merrett <chrisfu@hardc0re.org.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-26crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumaskSteffen Klassert
If the callback cpumask is empty, we crash with a division by zero when we try to calculate a callback cpu. So we don't update the callback cpu in pcrypt_do_parallel if the callback cpumask is empty. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-07-26padata: Check for valid cpumasksSteffen Klassert
Now that we allow to change the cpumasks from userspace, we have to check for valid cpumasks in padata_do_parallel. This patch adds the necessary check. This fixes a division by zero crash if the parallel cpumask contains no active cpu. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-07-26padata: Allocate cpumask dependend recources in any caseSteffen Klassert
The cpumask separation work assumes the cpumask dependend recources present regardless of valid or invalid cpumasks. With this patch we allocate the cpumask dependend recources in any case. This fixes two NULL pointer dereference crashes in padata_replace and in padata_get_cpumask. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-07-26padata: Fix cpu index countingSteffen Klassert
The counting of the cpu index got lost with a recent commit. This patch restores it. This fixes a hang of the parallel worker threads on cpu hotplug. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-07-25net: dev_forward_skb should call nf_resetBen Greear
With conn-track zones and probably with different network namespaces, the netfilter logic needs to be re-calculated on packet receive. If the netfilter logic is not reset, it will not be recalculated properly. This patch adds the nf_reset logic to dev_forward_skb. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25forcedeth: Fix different hardware statistics versions.Mike Ditto
The macros for the values of the bit field describing the four different versions of statistics supported by different hardware variants were being misused. Where the code was trying to test if the hardware implements V3, it was actually testing whether it implements any of V1, V2, or V3, causing the driver to report statistics that don't really exist in the hardware, with bogus values. Signed-off-by: Mike Ditto <mditto@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26tpm_tis: fix subsequent suspend failuresRajiv Andrade
Fix subsequent suspends by issuing tpm_continue_selftest during resume. Otherwise, the tpm chip seems to be not fully initialized and will reject the save state command during suspend, thus preventing the whole system to suspend. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: David Safford <safford@watson.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
2010-07-25net-next: Fix an overflow bug in vmxnet3 Tx descriptorBhavesh Davda
Fix an overflow bug in vmxnet3 Tx descriptor This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing into the 'gen' bit in the descriptor thereby corrupting the descriptor and stalling the transmit ring. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Matthew Delco <delcoM@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-253c59x: Add ethtool WOL supportAndrew O. Shadoura
This patch adds wrappers for ethtool to get or set wake-on-LAN setting without re-inserting the kernel module. Signed-off-by: Andrew O. Shadoura <andrew@beldisplaytech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix diag resource allocationSony Chacko
netif_device_attach missing from error path in qlcnic_diag_alloc_res Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix loopback testAmit Kumar Salecha
o Loopback not supported for virtual function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES"Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-24net: pskb_expand_head() optimizationEric Dumazet
Move frags[] at the end of struct skb_shared_info, and make pskb_expand_head() copy only the used part of it instead of whole array. This should avoid kmemcheck warnings and speedup pskb_expand_head() as well, avoiding a lot of cache misses. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 05:21:18 +0000