summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-24mac80211: expose txq queue depth and size to driversMichal Kazior
This will allow drivers to make more educated decisions whether to defer transmission or not. Relying on wake_tx_queue() call count implicitly was not possible because it could be called without queued frame count actually changing on software tx aggregation start/stop code paths. It was also not possible to know how long byte-wise queue was without dequeueing. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: Parse legacy and HT rate in injected framesSven Eckelmann
Drivers/devices without their own rate control algorithm can get the information what rates they should use from either the radiotap header of injected frames or from the rate control algorithm. But the parsing of the legacy rate information from the radiotap header was removed in commit e6a9854b05c1 ("mac80211/drivers: rewrite the rate control API"). The removal of this feature heavily reduced the usefulness of frame injection when wanting to simulate specific transmission behavior. Having rate parsing together with MCS rates and retry support allows a fine grained selection of the tx behavior of injected frames for these kind of tests. Signed-off-by: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: mesh: drop constant field mean_chain_lenBob Copeland
The mean_chain_len field in struct mesh_table is copied whenever a new mesh table is allocated, but only ever has the value 2 and is never otherwise updated, so just remove it and use the related define instead. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: avoid excessive stack usage in sta_infoArnd Bergmann
When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 98b6218388e3 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26e266 ("mac80211: send statistics with delete station event") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: always print a message when disconnectingJohannes Berg
Make sure there's at least a debug message whenever the connection to the AP is terminated. Also change one message from wiphy_debug() to the common mlme_dbg(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: fix ibss scan parametersSara Sharon
When joining IBSS a full scan should be initiated in order to search for existing cell, unless the fixed_channel parameter was set. A default channel to create the IBSS on if no cell was found is provided as well. However - a scan is initiated only on the default channel provided regardless of whether ifibss->fixed_channel is set or not, with the obvious result of the cell not joining existing IBSS cell that is on another channel. Fixes: 76bed0f43b27 ("mac80211: IBSS fix scan request") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: add RX_FLAG_MACTIME_PLCP_STARTJohannes Berg
The timestamp given by iwlwifi is at the beginning of the frame over the air, at (or during) the SYNC field. Allow such timestamps to be given to mac80211, at least (for now) for frames with non-HT/VHT preambles. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: fix unnecessary frame drops in mesh fwdingMichal Kazior
The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: fix txq queue related crashesMichal Kazior
The driver can access the queue simultanously while mac80211 tears down the interface. Without spinlock protection this could lead to corrupting sk_buff_head and subsequently to an invalid pointer dereference. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: mesh_plink: remove redundant sta_info checkSunil Shahu
Remove unnecessory "if" statement and club it with previos "if" block. Signed-off-by: Sunil Shahu <shshahu@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: Update userspace API documentationJoão Paulo Rechi Vita
Add a note to userspace on the effect of RFKILL_OP_CHANGE_ALL also updating the default state for hotplugged devices. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> [reword a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: Remove obsolete "claim" sysfs interfaceJoão Paulo Rechi Vita
This was scheduled to be removed in 2012 by: commit 69c86373c6ea1149aa559e6088362d58d8ec8835 Author: florian@mickler.org <florian@mickler.org> Date: Wed Feb 24 12:05:16 2010 +0100 Document the rfkill sysfs ABI This moves sysfs ABI info from Documentation/rfkill.txt to the ABI subfolder and reformats it. This also schedules the deprecated sysfs parts to be removed in 2012 (claim file) and 2014 (state file). Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: remove/inline __rfkill_set_hw_stateJoão Paulo Rechi Vita
__rfkill_set_hw_state() is only one used in rfkill_set_hw_state(), and none of them are long or complicated, so merging the two makes the code easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: use variable instead of duplicating the expressionJoão Paulo Rechi Vita
RFKILL_BLOCK_SW value have just been saved to prev, no need to check it again in the if expression. This makes code a little bit easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24cfg80211: Fix some linguistics in KconfigOla Olsson
Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: disentangle polling pause and suspendJohannes Berg
When suspended while polling is paused, polling will erroneously resume at resume time. Fix this by tracking pause and suspend in separate state variable and adding the necessary checks. Clarify the documentation on this as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211_hwsim: remove shadowing variableJohannes Berg
The function here already has a variable hdr that even contains the right thing, so the inner scope's hdr variable that's shadowing the outer one can just be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: Make addr const in SET_IEEE80211_PERM_ADDR()Bjorn Andersson
Make the addr parameter const in SET_IEEE80211_PERM_ADDR() to save clients from having to cast away a const qualifier. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: refactor HT/VHT to chandef codeJohannes Berg
The station MLME and IBSS/mesh ones use entirely different code for interpreting HT and VHT operation elements. Change the code that interprets them a bit - it now modifies an existing chandef - and use it also in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24cfg80211: add more warnings for inconsistent opsOla Olsson
Print a warning whenever an expected callback function lacks implementation. Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: limit the A-MSDU Tx based on peer's capabilitiesEmmanuel Grumbach
In VHT, the specification allows to limit the number of MSDUs in an A-MSDU in the Extended Capabilities IE. There is also a limitation on the byte size in the VHT IE. In HT, the only limitation is on the byte size. Parse the capabilities from the peer and make them available to the driver. In HT, there is another limitation when a BA agreement is active: the byte size can't be greater than 4095. This is not enforced here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: Recalc min chandef when station is associatedIlan Peer
The minimum chandef bandwidth calculation was done only in case a new station was inserted (or when an existing station was removed). However, it is possible that stations are inserted before they are associated, e.g., when FULL_AP_CLIENT_STATE is supported and user space adds stations unassociated. Fix this by calling ieee80211_recalc_min_chandef() whenever a station transitions in/out the associated state, and only consider station marked as associated. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: allow drivers to report (non-)monitor framesGrzegorz Bajorski
Some drivers offload some frames internally (e.g. AddBa). Reporting such frames to mac80211 would only confuse MLME. However it would be useful to be able to pass such frames to monitor interfaces for sniffing purposes, e.g. when running AP + monitor. To do that allow drivers to tell mac80211 whether a given frame should be: - processed but not delivered to any monitor vif - not processed but delievered to monitor vifs only Signed-off-by: Grzegorz Bajorski <grzegorz.bajorski@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: support hw managing reorder logicSara Sharon
Enable driver to manage the reordering logic itself. This is needed for example for the iwlwifi driver that will support hardware assisted reordering. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24x86/entry/32: Add an ASM_CLAC to entry_SYSENTER_32Andy Lutomirski
Both before and after 5f310f739b4c ("x86/entry/32: Re-implement SYSENTER using the new C path"), we relied on a uaccess very early in the SYSENTER path to clear AC. After that change, though, we can potentially make it all the way into C code with AC set, which enlarges the attack surface for SMAP bypass by doing SYSENTER with AC set. Strengthen the SMAP protection by addding the missing ASM_CLAC right at the beginning. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3e36be110724896e32a4a1fe73bacb349d3cba94.1456262295.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24ARC: SMP: No need for CONFIG_ARC_IPI_DBGVineet Gupta
This was more relevant during SMP bringup. The warning for bogus msg better be visible always. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARCv2: Elide sending new cross core intr if receiver didn't ack prevVineet Gupta
ARConnect/MCIP IPI sending has a retry-wait loop in case caller had not seen a previous such interrupt. Turns out that it is not needed at all. Linux cross core calling allows coalescing multiple IPIs to same receiver - it is fine as long as there is one. This logic is built into upper layer already, at a higher level of abstraction. ipi_send_msg_one() sets the actual msg payload, but it only calls MCIP IPI sending if msg holder was empty (using atomic-set-new-and-get-old construct). Thus it is unlikely that the retry-wait looping was ever getting exercised at all. Cc: Chuck Jordan <cjordan@synopsys.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARCv2: SMP: Push IPI_IRQ into IPI providerVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARC: [intc-compact] Remove IPI setup from ARCompact portVineet Gupta
There is no real ARC700 based SMP SoC so remove IPI definition. EZChip's SMP ARC700 is going to use a different intc and IPI provider anyways. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARCv2: SMP: Emulate IPI to self using software triggered interruptVineet Gupta
ARConnect/MCIP Inter-Core-Interrupt module can't send interrupt to local core. So use core intc capability to trigger software interrupt to self, using an unsued IRQ #21. This showed up as csd deadlock with LTP trace_sched on a dual core system. This test acts as scheduler fuzzer, triggering all sorts of schedulting activity. Trouble starts with IPI to self, which doesn't get delivered (effectively lost due to H/w capability), but the msg intended to be sent remain enqueued in per-cpu @ipi_data. All subsequent IPIs to this core from other cores get elided due to the IPI coalescing optimization in ipi_send_msg_one() where a pending msg implies an IPI already sent and assumes other core is yet to ack it. After the elided IPI, other core simply goes into csd_lock_wait() but never comes out as this core never sees the interrupt. Fixes STAR 9001008624 Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [4.2] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23Merge tag 'dm-4.5-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix a 112 byte leak for each IO request that is requeued while DM multipath is handling faults due to path failures. This leak does not happen if blk-mq DM multipath is used. It only occurs if .request_fn DM multipath is stacked ontop of blk-mq paths (e.g. scsi-mq devices)" * tag 'dm-4.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
2016-02-23Merge tag 'mmc-v4.5-rc4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC fix from Ulf Hansson: "Here's an mmc fix intended for v4.5 rc6. MMC host: - omap_hsmmc: Fix PM regression for deferred probe" * tag 'mmc-v4.5-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap_hsmmc: Fix PM regression with deferred probe for pm_runtime_reinit
2016-02-23nvdimm: use 'u64' for pfn flagsArnd Bergmann
A recent bugfix changed pfn_t to always be 64-bit wide, but did not change the code in pmem.c, which is now broken on 32-bit architectures as reported by gcc: In file included from ../drivers/nvdimm/pmem.c:28:0: drivers/nvdimm/pmem.c: In function 'pmem_alloc': include/linux/pfn_t.h:15:17: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define PFN_DEV (1ULL << (BITS_PER_LONG_LONG - 3)) This changes the intermediate pfn_flags in struct pmem_device to be 64 bit wide as well, so they can store the flags correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: db78c22230d0 ("mm: fix pfn_t vs highmem") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-02-23devm_memremap: Fix error value when memremap failedToshi Kani
devm_memremap() returns an ERR_PTR() value in case of error. However, it returns NULL when memremap() failed. This causes the caller, such as the pmem driver, to proceed and oops later. Change devm_memremap() to return ERR_PTR(-ENXIO) when memremap() failed. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-02-23nfit: update address range scrub commands to the acpi 6.1 formatDan Williams
The original format of these commands from the "NVDIMM DSM Interface Example" [1] are superseded by the ACPI 6.1 definition of the "NVDIMM Root Device _DSMs" [2]. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf [2]: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf "9.20.7 NVDIMM Root Device _DSMs" Changes include: 1/ New 'restart' fields in ars_status, unfortunately these are implemented in the middle of the existing definition so this change is not backwards compatible. The expectation is that shipping platforms will only ever support the ACPI 6.1 definition. 2/ New status values for ars_start ('busy') and ars_status ('overflow'). Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-02-24Merge branch 'for-rafael' of ↵Rafael J. Wysocki
https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq Pull a devfreq fix for v4.5 from MyungJoo Ham. * 'for-rafael' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq: PM / devfreq: tegra: Set freq in rate callback
2016-02-23Merge tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Stable bugfixes: - Fix nfs_size_to_loff_t - NFSv4: Fix a dentry leak on alias use Other bugfixes: - Don't schedule a layoutreturn if the layout segment can be freed immediately. - Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode - rpcrdma_bc_receive_call() should init rq_private_buf.len - fix stateid handling for the NFS v4.2 operations - pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page - fix panic in gss_pipe_downcall() in fips mode - Fix a race between layoutget and pnfs_destroy_layout - Fix a race between layoutget and bulk recalls" * tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout auth_gss: fix panic in gss_pipe_downcall() in fips mode pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page nfs4: fix stateid handling for the NFS v4.2 operations NFSv4: Fix a dentry leak on alias use xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode pNFS: Fix pnfs_mark_matching_lsegs_return() nfs: fix nfs_size_to_loff_t
2016-02-23x86: fix SMAP in 32-bit environmentsLinus Torvalds
In commit 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses") I changed how the stac/clac instructions were generated around the user space accesses, which then made it possible to do batched accesses efficiently for user string copies etc. However, in doing so, I completely spaced out, and didn't even think about the 32-bit case. And nobody really even seemed to notice, because SMAP doesn't even exist until modern Skylake processors, and you'd have to be crazy to run 32-bit kernels on a modern CPU. Which brings us to Andy Lutomirski. He actually tested the 32-bit kernel on new hardware, and noticed that it doesn't work. My bad. The trivial fix is to add the required uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>. I feel a bit bad about this patch, just because that header file really should be cleaned up to avoid all the duplicated code in it, and this commit just expands on the problem. But this just fixes the bug without any bigger cleanup surgery. Reported-and-tested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-23bnxt_en: Fix zero padding of tx push data.Michael Chan
The arithmetic to zero pad the last 64-bit word in the push buffer is not correct. 1. It should be pdata + length to get to the end. 2. 'pdata' is void pointer and passing it to PTR_ALIGN() will cast the aligned pointer to void. Pass 'end' which is u64 pointer to PTR_ALIGN() instead so that the aligned pointer - 1 is the last 64-bit pointer to data. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23tunnel: Clear IPCB(skb)->opt before dst_link_failure calledBernie Harris
IPCB may contain data from previous layers (in the observed case the qdisc layer). In the observed scenario, the data was misinterpreted as ip header options, which later caused the ihl to be set to an invalid value (<5). This resulted in an infinite loop in the mips implementation of ip_fast_csum. This patch clears IPCB(skb)->opt before dst_link_failure can be called for various types of tunnels. This change only applies to encapsulated ipv4 packets. The code introduced in 11c21a30 which clears all of IPCB has been removed to be consistent with these changes, and instead the opt field is cleared unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to SIT, GRE, and IPIP tunnels. The relevant vti, l2tp, and pptp functions already contain similar code for clearing the IPCB. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23tcp: convert cached rtt from usec to jiffies when feeding initial rtoKonstantin Khlebnikov
Currently it's converted into msecs, thus HZ=1000 intact. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 740b0f1841f6 ("tcp: switch rtt estimations to usec resolution") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Add Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card (rev3) to qmi_wwanPatrik Halfar
New revison of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by: Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge branch 'dsa-pass-bridge-to-drivers'David S. Miller
Vivien Didelot says: ==================== net: dsa: pass bridge device to drivers This patchset simplifies the DSA layer. A switch may support multiple bridges with the same hardware VLAN. Thus a check such as dsa_bridge_check_vlan_range must be moved from the DSA layer to the concerned driver. The first purpose of this patchset is to help moving this check to the mv88e6xxx driver, which is the only one affected at the moment. To do that, pass directly the bridge net_device structure down to the DSA drivers, instead of calculating a bitmask of bridge members. The second purpose is to prepare the replacement of the complex port_vlan_getnext approach. A second patchset is ready to follow, implementing port_vlan_dump and thus simplifying the DSA slave code one more time. Note that this patchset applies on top of https://lkml.org/lkml/2016/2/5/532. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: remove dsa_bridge_check_vlan_rangeVivien Didelot
DSA drivers may support multiple bridge groups with the same hardware VLAN. The mv88e6xxx driver which cannot yet, already has its own check for overlapping bridges. Thus remove the check from the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: mv88e6xxx: check hardware VLAN in useVivien Didelot
The DSA drivers now have access to the VLAN prepare phase and the bridge net_device. It is easier to check for overlapping bridges from within the driver. Thus add such check in mv88e6xxx_port_vlan_prepare. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: pass bridge down to driversVivien Didelot
Some DSA drivers may or may not support multiple software bridges on top of an hardware switch. It is more convenient for them to access the bridge's net_device for finer configuration. Removing the need to craft and access a bitmask also simplifies the code. This patch changes the signature of bridge related functions, update DSA drivers, and removes dsa_slave_br_port_mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: mv88e6xxx: add port private structureVivien Didelot
Add a per-port mv88e6xxx_priv_port structure to store per-port related data, instead of adding several arrays of DSA_MAX_PORTS elements in the mv88e6xxx_priv_state structure. It currently only contains the port STP state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23iwlwifi: mvm: Fix paging memory leakMatti Gottlieb
If the opmode is stopped and started again we did not free the paging buffers. Fix that. In addition when freeing the firmware's paging download buffer, set the pointer to NULL. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-23Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== pull request [net-next]: batman-adv 20160223 This is a cleanup patchset: first the BATADV_BONDING_TQ_THRESHOLD constant gets removed as it was defined but not used anywhere, then all our *_free_ref functions are renamed to *_put in order to follow the kernel naming convention by Sven Eckelmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23ieee802154: 6lowpan: fix return of netdev notifierAlexander Aring
This patch fixed the return value of netdev notifier. If the command is a don't care a NOTIFY_DONE should be returned. If the command matched a NOTIFY_OK should be returned. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-19 08:19:03 +0000