summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-236lowpan: iphc: add support for stateful compressionAlexander Aring
This patch introduce support for IPHC stateful address compression. It will offer the context table via one debugfs entry. This debugfs has and directory for each cid entry for the context table. Inside each cid directory there exists the following files: - "active": If the entry is added or deleted. The context table is original a list implementation, this flag will indicate if the context is part of list or not. - "prefix": The ipv6 prefix. - "prefix_length": The prefix length for the prefix. - "compression": The compression flag according RFC6775. This part should be moved into sysfs after some testing time. Also the debugfs entry contains a "show" file which is a pretty-printout for the current context table information. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23mac802154: Fixes kernel oops when unloading a radio driverKoen Zandberg
Destroying the workqueue before unregistering the net device caused a kernel oops Signed-off-by: Koen Zandberg <koen@bergzand.net> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23mrf24j40: add writeable missing regAlexander Aring
This patch adds a missing reg for writeable stuff for regmap. Cc: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix state change handling on errorAlexander Aring
This patch force always to set "is_tx_from_off", when calibration timeout was not occurred. In case of error handling the is_tx_from_off can be inside in an invalid state. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix race on error handlingAlexander Aring
The resource "ctx" can be still used by at86rf230_async_state_change, we need to free it at the complete handler of the async state change to avoid a use after free. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23mac802154: fix mac header length checkAlexander Aring
I got report about that sometimes the WARN_ON occurs there which should never happen. I came to the conclusion that the mac header is there but inside the headroom of skb. The skb->len information doesn't contain the information about the headroom length and skb->len is lesser than two. We check now if the skb_mac_header pointer is set and the room between mac header pointer and tail pointer. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23MAINTAINERS: update 802.15.4 entriesAlexander Aring
This patch updates my e-mail address and other pending information for 802.15.4 subsystem which are not correct anymore. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_core: cancel power off delayed work properlyWei-Ning Huang
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need to be cancel or HCI will be powered off even if it's managed. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Add new AR3012 ID 0489:e095Dmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-02-23Bluetooth: btbcm: Fix handling of firmware not foundPetri Gynther
If the call to request_firmware() fails in btbcm_setup_patchram(), the BCM chip will be operating with its default firmware. In this case, btbcm_setup_patchram() should not return immediately but instead should skip to btbcm_check_bdaddr() and quirk setup. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_bcm: Add BCM2E7C ACPI IDMika Westerberg
Recent macbooks (early 2015) with BCM43241 use this ACPI ID. Add it to the list of supported devices. Reported-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_bcm: Add new ACPI ID for bcm43241J.J. Meijer
This ACPI ID is used at least by HP for their Omni 10 5600eg tablet. Signed-off-by: J.J. Meijer <jjmeijer88@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: btusb: Add new AR3012 ID 13d3:3395Dmitry Tunin
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564 Reported-and-tested-by: Christopher Simerly <kilikopela29@gmail.com> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-02-23Bluetooth: hci_intel: Fix a wrong comparisonAnton Protopopov
A return value of the intel_wait_booting() function compared with a constant ETIMEDOUT instead of -ETIMEDOUT. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Use managed version of led_trigger_register in LED triggerHeiner Kallweit
Recently a managed version of led_trigger_register was introduced. Using devm_led_trigger_register allows to simplify the LED trigger code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: ath3k: Fixed a blank line after declaration issueBhumika Goyal
Fixed a coding style issue. Added a blank link after declaration. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23KVM: arm/arm64: vgic: Ensure bitmaps are long enoughMark Rutland
When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of bits we need by 8 to figure out how many bytes to allocate. However, bitmap elements are always accessed as unsigned longs, and if we didn't happen to allocate a size such that size % sizeof(unsigned long) == 0, bitmap accesses may go past the end of the allocation. When using KASAN (which does byte-granular access checks), this results in a continuous stream of BUGs whenever these bitmaps are accessed: ============================================================================= BUG kmalloc-128 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730 INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080 INFO: Object 0xffffffc935769500 @offset=1280 fp=0x (null) Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G B 4.4.0+ #17 Hardware name: ARM Juno development board (r1) (DT) Call trace: [<ffffffc00008e770>] dump_backtrace+0x0/0x280 [<ffffffc00008ea04>] show_stack+0x14/0x20 [<ffffffc000726360>] dump_stack+0x100/0x188 [<ffffffc00030d324>] print_trailer+0xfc/0x168 [<ffffffc000312294>] object_err+0x3c/0x50 [<ffffffc0003140fc>] kasan_report_error+0x244/0x558 [<ffffffc000314548>] __asan_report_load8_noabort+0x48/0x50 [<ffffffc000745688>] __bitmap_or+0xc0/0xc8 [<ffffffc0000d9e44>] kvm_vgic_flush_hwstate+0x1bc/0x650 [<ffffffc0000c514c>] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60 [<ffffffc0000b9a6c>] kvm_vcpu_ioctl+0x474/0xa68 [<ffffffc00036b7b0>] do_vfs_ioctl+0x5b8/0xcb0 [<ffffffc00036bf34>] SyS_ioctl+0x8c/0xa0 [<ffffffc000086cb0>] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix the issue by always allocating a multiple of sizeof(unsigned long), as we do elsewhere in the vgic code. Fixes: c1bfb577a ("arm/arm64: KVM: vgic: switch to dynamic allocation") Cc: stable@vger.kernel.org Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23sunrpc/cache: fix off-by-one in qword_get()Stefan Hajnoczi
The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-02-23rocker: fix rocker_world_port_obj_vlan_add()Dan Carpenter
We were changing return values and accidentally made rocker_world_port_obj_vlan_add() into a no-op. Fixes: fccd84d44912 ('rocker: return -EOPNOTSUPP for undefined world ops') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23cfg80211: stop critical protocol session upon disconnect eventArend van Spriel
When user-space has started a critical protocol session and a disconnect event occurs, the rdev::crit_prot_nlportid remains set. This caused a subsequent NL80211_CMD_CRIT_PROTO_START to fail (-EBUSY). Fix this by clearing the rdev attribute and call .crit_proto_stop() callback upon disconnect event. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23nl80211: Zero out the connection keys memory when freeing them.Ola Olsson
The connection keys are zeroed out in all other cases except this one. Let's fix the last one as well. Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23mac80211: minstrel_ht: set default tx aggregation timeout to 0Felix Fietkau
The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Cc: stable@vger.kernel.org Acked-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCEAlexey Brodkin
Even though DEVTMPFS is required when our pre-built initramfs is used it is not the case in general. It is perfectly possible to use initramfs with device nodes already populated or there could be other usages, see discussion below for more detials: http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/37819/focus=37821 This change removes mentioned dependency from arch/arc/Kconfig updating instead those defconfigs that are usually used with this kind of pre-build initramfs. And while at it all touched defconfigs were regenerated via savedefconfig and some options were removed: * USB is selected by other options implicitly * VGA_CONSOLE is disableb for ARC since 031e29b5877f31676739dc2f847d04c2c0732034 * EXT3_FS automatically selects EXT4_FS * MTDxxx and JFFS2_FS make no sense for AXS because AXS NAND controller is not upstreamed * NET_OSCI_LAN is not in upstream as well * ARCPGU_xxx options make no sense because ARC PGU is not yet in upstream and when it gets there all config options would be taken from devicetree Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23MAINTAINERS: drop OMAP USB and MUSB maintainershipFelipe Balbi
Now that I have switched to another company, I won't be able to help by maintaining OMAP USB Support and/or the MUSB driver. OMAP USB Support is left Orphaned. MUSB's new maintainer will be Bin Liu from Texas Instruments who has accepted to take over starting with v4.6. Cc: Bin Liu <b-liu@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: musb: fix DMA for host modeCristian Birsan
Commit ac33cdb16681 ("usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5") introduces a problem setting DMA host mode. The musb_advance_schedule() is called immediately after receiving an endpoint RX interrupt without waiting for the DMA transfer to complete. As a consequence when the dma complete interrupt arrives the in_qh member of hw_ep is already null an the musb_host_rx() exits on !urb error case. Fix the done condition that advances the musb schedule. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: phy: msm: Trigger USB state detection work in DRD modeIvan T. Ivanov
When working in Dual Role Device mode, USB state machine is not kicked, when host or gadget drivers are loaded. Fix this be explicitly triggering state detection on client driver load. Issue is that if the board is booted without micro usb cable and usb device attached, kernel fails to populate the usb host and device. The reason for this is that the state machine worker logic only checks for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker thread. However if the phy is configured in OTG mode it would fail to run the state machine, resulting in failure to detect for very first time. This patch fixes the issue by removing the explicit checks. Issue is noticed on Qualcomm Dragon board DB410C. [srinivas.kandagatla@linaro.org: Added more details to log] Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: net2280: fix endpoint max packet for super speed connectionsSimon Appleby
This patch fixes the register offset used for super-speed connection's max packet size. Without it using the 338x series of devices in enhanced mode will only allow full or high speed operation to function correctly. Signed-off-by: Simon Appleby <simon.appleby@pickeringtest.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: gadgetfs: unregister gadget only if it got successfully registeredMarek Szyprowski
Gadgetfs driver called usb_gadget_unregister_driver unconditionally, even if it didn't register it earlier due to other failures. This patch fixes this. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23usb: gadget: remove driver from pending list on probe errorMarek Szyprowski
Retry gadget probe only if the probe result is -EPROBE_DEFER, not on every probe error. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23x86/platform/intel/quark: Change the kernel's IMR lock bit to falseBryan O'Donoghue
Currently when setting up an IMR around the kernel's .text section we lock that IMR, preventing further modification. While superficially this appears to be the right thing to do, in fact this doesn't account for a legitimate change in the memory map such as when executing a new kernel via kexec. In such a scenario a second kernel can have a different size and location to it's predecessor and can view some of the memory occupied by it's predecessor as legitimately usable DMA RAM. If this RAM were then subsequently allocated to DMA agents within the system it could conceivably trigger an IMR violation. This patch fixes the this potential situation by keeping the kernel's .text section IMR lock bit false by default. Suggested-by: Ingo Molnar <mingo@kernel.org> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boon.leong.ong@intel.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/1456190999-12685-2-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23batman-adv: Rename batadv_tt_orig_list_entry *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_tt_global_entry *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_tt_local_entry *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node_vlan *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_nc_path *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_nc_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_softif_vlan *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_tvlv_container *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_tvlv_handler *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_gw_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_dat_entry *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_claim *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_backbone_gw *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif_neigh *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_ifinfo *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_ifinfo *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
generated by cgit (git 2.34.1) at 2025-09-19 12:46:36 +0000