summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-29mlxsw: spectrum: Use different trap group for externally routed packetsIdo Schimmel
Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: spectrum_router: Allow programming link-local host routesIdo Schimmel
Cited commit added the ability to program link-local prefix routes to the ASIC so that relevant packets are routed and trapped correctly. However, host routes were not included in the change and thus not programmed to the ASIC. This can result in packets being trapped via an external route trap instead of a local route trap as in IPv4. Fix this by programming all the link-local routes to the ASIC. Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29ipv4: Silence suspicious RCU usage warningIdo Schimmel
fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29vxlan: Ensure FDB dump is performed under RCUIdo Schimmel
The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQEMike Marciniszyn
The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385. The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0. The next call to rvt_get_rwqe with the decremented count: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count. Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state. In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory. Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline. Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com Reported-by: Zhaojuan Guo <zguo@redhat.com> Cc: <stable@vger.kernel.org> # 5.4.x Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-29Merge tag 'drm-fixes-2020-07-29' of git://anongit.freedesktop.org/drm/drm ↵Linus Torvalds
into master Pull drm fixes from Dave Airlie: "The nouveau fixes missed the last pull by a few hours, and we had a few arm driver/panel/bridge fixes come in. This is possibly a bit more than I'm comfortable sending at this stage, but I've looked at each patch, the core + nouveau patches fix regressions, and the arm related ones are all around screens turning on and working, and are mostly trivial patches, the line count is mostly in comments. core: - fix possible use-after-free drm_fb_helper: - regression fix to use memcpy_io on bochs' sparc64 nouveau: - format modifiers fixes - HDA regression fix - turing modesetting race fix of: - fix a double free dbi: - fix SPI Type 1 transfer mcde: - fix screen stability crash panel: - panel: fix display noise on auo,kd101n80-45na - panel: delay HPD checks for boe_nv133fhm_n61 bridge: - bridge: drop connector check in nwl-dsi bridge - bridge: set proper bridge type for adv7511" * tag 'drm-fixes-2020-07-29' of git://anongit.freedesktop.org/drm/drm: drm: hold gem reference until object is no longer accessed drm/dbi: Fix SPI Type 1 (9-bit) transfer drm/drm_fb_helper: fix fbdev with sparc64 drm/mcde: Fix stability issue drm/bridge: nwl-dsi: Drop DRM_BRIDGE_ATTACH_NO_CONNECTOR check. drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 ms drm/bridge/adv7511: set the bridge type properly drm: of: Fix double-free bug drm/nouveau/fbcon: zero-initialise the mode_cmd2 structure drm/nouveau/fbcon: fix module unload when fbcon init has failed for some reason drm/nouveau/kms/tu102: wait for core update to complete when assigning windows drm/nouveau/kms/gf100: use correct format modifiers drm/nouveau/disp/gm200-: fix regression from HDA SOR selection changes
2020-07-29random32: update the net random state on interrupt and activityWilly Tarreau
This modifies the first 32 bits out of the 128 bits of a random CPU's net_rand_state on interrupt or CPU activity to complicate remote observations that could lead to guessing the network RNG's internal state. Note that depending on some network devices' interrupt rate moderation or binding, this re-seeding might happen on every packet or even almost never. In addition, with NOHZ some CPUs might not even get timer interrupts, leaving their local state rarely updated, while they are running networked processes making use of the random state. For this reason, we also perform this update in update_process_times() in order to at least update the state when there is user or system activity, since it's the only case we care about. Reported-by: Amit Klein <aksecurity@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-29virtio_balloon: fix up endian-ness for free cmd idMichael S. Tsirkin
free cmd id is read using virtio endian, spec says all fields in balloon are LE. Fix it up. Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Acked-by: David Hildenbrand <david@redhat.com>
2020-07-29virtio-balloon: Document byte ordering of poison_valAlexander Duyck
The poison_val field in the virtio_balloon_config is treated as a little-endian field by the host. Since we are currently only having to deal with a single byte poison value this isn't a problem, however if the value should ever expand it would cause byte ordering issues. Document that in the code so that we know that if the value should ever expand we need to byte swap the value on big-endian architectures. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Link: https://lore.kernel.org/r/20200713203539.17140.71425.stgit@localhost.localdomain Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
2020-07-29vhost/scsi: fix up req type endian-nessMichael S. Tsirkin
vhost/scsi doesn't handle type conversion correctly for request type when using virtio 1.0 and up for BE, or cross-endian platforms. Fix it up using vhost_32_to_cpu. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-07-29Merge branch 'nvme-5.9' of git://git.infradead.org/nvme into for-5.9/driversJens Axboe
Pull NVMe updates from Christoph. * 'nvme-5.9' of git://git.infradead.org/nvme: (30 commits) nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() nvme: introduce nvme_execute_passthru_rq to call nvme_passthru_[start|end]() nvme: create helper function to obtain command effects nvme: clear any SGL flags in passthru commands nvmet-fc: remove redundant del_work_active flag nvmet-fc: check successful reference in nvmet_fc_find_target_assoc nvme-fc: set max_segments to lldd max value nvme-fc: drop a duplicated word in a comment nvme-hwmon: log the controller device name ...
2020-07-29Merge branch 'nvme-5.8' of git://git.infradead.org/nvme into block-5.8Jens Axboe
Pull NVMe fixes from Christoph. * 'nvme-5.8' of git://git.infradead.org/nvme: nvme: add a Identify Namespace Identification Descriptor list quirk nvme-pci: prevent SK hynix PC400 from using Write Zeroes command nvme-tcp: fix possible hang waiting for icresp response
2020-07-29RDMA/mlx5: Allow providing extra scatter CQE QP flagLeon Romanovsky
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without relation to device capability. Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP flag. Existing user applications are failing on this new validity check. Fixes: 90ecb37a751b ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags") Fixes: 37518fa49f76 ("RDMA/mlx5: Process all vendor flags in one place") Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-29firmware: Fix a reference count leak.Qiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Callback function fw_cfg_sysfs_release_entry() in kobject_put() can handle the pointer "entry" properly. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200613190533.15712-1-wu000273@umn.edu Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-29cpuidle: change enter_s2idle() prototypeNeal Liu
Control Flow Integrity(CFI) is a security mechanism that disallows changes to the original control flow graph of a compiled binary, making it significantly harder to perform such attacks. init_state_node() assign same function callback to different function pointer declarations. static int init_state_node(struct cpuidle_state *idle_state, const struct of_device_id *matches, struct device_node *state_node) { ... idle_state->enter = match_id->data; ... idle_state->enter_s2idle = match_id->data; } Function declarations: struct cpuidle_state { ... int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); void (*enter_s2idle) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); }; In this case, either enter() or enter_s2idle() would cause CFI check failed since they use same callee. Align function prototype of enter() since it needs return value for some use cases. The return value of enter_s2idle() is no need currently. Signed-off-by: Neal Liu <neal.liu@mediatek.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: psci: Prevent domain idlestates until consumers are readyUlf Hansson
Depending on the SoC/platform, additional devices may be part of the PSCI PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for example, even if this is not yet visible in the corresponding DTS-files. Without going into too much details, a device like the 'qcom,rpmh-rsc' may have HW constraints that needs to be obeyed to, before a domain idlestate can be picked. Therefore, let's implement the ->sync_state() callback to receive a notification when all consumers of the PSCI PM domain providers have been attached/probed to it. In this way, we can make sure all constraints from all relevant devices, are taken into account before allowing a domain idlestate to be picked. Acked-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: psci: Convert PM domain to platform driverUlf Hansson
To enable support for deferred probing and to allow implementation of the ->sync_state() callback from subsequent changes, let's convert into a platform driver. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: psci: Fix error path via converting to a platform driverUlf Hansson
The current error paths for the cpuidle-psci driver, may leak memory or possibly leave CPU devices attached to their PM domains. These are quite harmless issues, but still deserves to be taken care of. Although, rather than fixing them by keeping track of allocations that needs to be freed, which tends to become a bit messy, let's convert into a platform driver. In this way, it gets easier to fix the memory leaks as we can rely on the devm_* functions. Moreover, converting to a platform driver also enables support for deferred probe, which subsequent changes takes benefit from. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: psci: Fail cpuidle registration if set OSI mode failedUlf Hansson
Currently we allow the cpuidle driver registration to succeed, even if we failed to enable the OSI mode when the hierarchical DT layout is used. This means running in a degraded mode, by using the available idle states per CPU, while also preventing the domain idle states. Moving forward, this behaviour looks quite questionable to maintain, as complexity seems to grow around it, especially when trying to add support for deferred probe, for example. Therefore, let's make the cpuidle driver registration to fail in this situation, thus relying on the default architectural cpuidle backend for WFI to be used. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: psci: Split into two separate build objectsUlf Hansson
The combined build object for the PSCI cpuidle driver and the PSCI PM domain, is a bit messy. Therefore let's split it up by adding a new Kconfig ARM_PSCI_CPUIDLE_DOMAIN and convert into two separate objects. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29habanalabs: remove unused but set variable 'ctx_asid'Wei Yongjun
Gcc report warning as follows: drivers/misc/habanalabs/common/command_submission.c:373:6: warning: variable 'ctx_asid' set but not used [-Wunused-but-set-variable] 373 | int ctx_asid, rc; | ^~~~~~~~ This variable is not used in function cs_timedout(), this commit remove it to fix the warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200729155902.33976-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: qcom-spmi-sdam: Enable multiple devicesGuru Das Srinagesh
Using pdev->id as the nvmem's config ID (which, by default, is NVMEM_DEVID_NONE) prevents multiple instances of this driver from probing because of the following error: sysfs: cannot create duplicate filename '/bus/nvmem/devices/spmi_sdam' Use NVMEM_DEVID_AUTO as the NVMEM config ID to fix the issue. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-15-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29dt-bindings: nvmem: SID: add binding for A100's SID controllerYangtao Li
Add a binding for A100's SID controller. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: update Kconfig descriptionMatteo Croce
nvmem can't be built as module anymore, update its Kconfig description. Fixes: 2a37ce25d9f2 ("nvmem: disallow modular CONFIG_NVMEM") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: qfprom: Add fuse blowing supportRavi Kumar Bokka
This patch adds support for blowing fuses to the qfprom driver if the required properties are defined in the device tree. [Srini: Fixed merge conflict with AUTO ID] Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29dt-bindings: nvmem: Add properties needed for blowing fusesRavi Kumar Bokka
On some systems it's possible to actually blow the fuses in the qfprom from the kernel. Add properties to support that. NOTE: Whether this is possible depends on the BIOS settings and whether the kernel has permissions here, so not all boards will be able to blow fuses in the kernel. Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29dt-bindings: nvmem: qfprom: Convert to yamlRavi Kumar Bokka
This switches the bindings over from txt to yaml. Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instancesSrinivas Kandagatla
There could be multiple qfprom devices on some SoCs. For example, on MSM8939, qfprom@58000 holds efuse bits for Core Power Reduction (CPR), and qfprom@5c000 holds bits for TSENS. Registering multiple nvmem devices with the same id results in the following failure on the second device. [ 1.682731] sysfs: cannot create duplicate filename /bus/nvmem/devices/qfprom0 [ 1.685889] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.107-00567-g11c887ce2838-dirty #334 [ 1.693191] Hardware name: Square, Inc. T2 Devkit (DT) [ 1.701610] Call trace: [ 1.706673] dump_backtrace+0x0/0x158 [ 1.708987] show_stack+0x14/0x20 [ 1.712810] dump_stack+0x98/0xbc [ 1.716114] sysfs_warn_dup+0x60/0x78 [ 1.719401] sysfs_do_create_link_sd.isra.0+0xdc/0xe8 [ 1.723047] sysfs_create_link+0x20/0x40 [ 1.728088] bus_add_device+0x68/0x130 [ 1.732083] device_add+0x3f8/0x628 [ 1.735639] nvmem_register.part.4+0x150/0x348 [ 1.739018] devm_nvmem_register+0x4c/0xa8 [ 1.743532] qfprom_probe+0x94/0xb8 [ 1.747615] platform_drv_probe+0x50/0xa0 [ 1.750998] really_probe+0x1b8/0x298 [ 1.755164] driver_probe_device+0x58/0x100 [ 1.758810] __driver_attach+0xe0/0xe8 [ 1.762802] bus_for_each_dev+0x74/0xc8 [ 1.766622] driver_attach+0x20/0x28 [ 1.770354] bus_add_driver+0x1ac/0x218 [ 1.774175] driver_register+0x60/0x110 [ 1.777734] __platform_driver_register+0x40/0x48 [ 1.781570] qfprom_driver_init+0x18/0x20 [ 1.786416] do_one_initcall+0x5c/0x178 [ 1.790418] kernel_init_freeable+0x198/0x244 [ 1.794062] kernel_init+0x10/0x108 [ 1.798567] ret_from_fork+0x10/0x18 [ 1.802084] qcom,qfprom: probe of 5c000.qfprom failed with error -17 Fix this issue by using NVMEM_DEVID_AUTO. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: core: add support to auto devidSrinivas Kandagatla
For nvmem providers which have multiple instances, it is required to suffix the provider name with proper id, so that they do not confict for the same name. Currently the core does not handle this case properly eventhough core already has logic to generate the id. This patch add new devid type NVMEM_DEVID_AUTO for providers to be able to allow core to assign id and append it to provier name. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: core: Add nvmem_cell_read_u8()Andreas Färber
Complement the u16, u32 and u64 helpers with a u8 variant to ease accessing byte-sized values. This helper will be useful for Realtek Digital Home Center platforms, which store some byte and sub-byte sized values in non-volatile memory. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: core: Grammar fixes for help textAndreas Färber
It's "an unsigned" but "a U". Similarly, "an entry" but "a binary entry". While at it, also drop superfluous articles for negative and zero. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: sc27xx: add sc2730 efuse supportFreeman Liu
Add support to the new efuse IP which is integrated in the SC2730 which includes multiple blocks in a single chip. Signed-off-by: Freeman Liu <freeman.liu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: Enforce nvmem stride in the sysfs interfaceDouglas Anderson
The 'struct nvmem_config' has a stride attribute that specifies the needed alignment for accesses into the nvmem. This is used in nvmem_cell_info_to_nvmem_cell() but not in the sysfs read/write functions. If the alignment is important in one place it's important everywhere, so let's add enforcement. For now we'll consider it totally invalid to access with the wrong alignment. We could relax this in the read case where we could just read some extra bytes and throw them away. Relaxing it in the write case seems harder (and less safe?) since we'd have to read some data first and then write it back. To keep it symmetric we'll just disallow it in both cases. Reported-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Tested-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29MAINTAINERS: Add git tree for NVMEM FRAMEWORKTiezhu Yang
There is no git tree for NVMEM FRAMEWORK in MAINTAINERS, it is not convinent to rebase, add it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29nvmem: sprd: Fix return value of sprd_efuse_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 096030e7f449 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29drivers: android: Fix the SPDX comment styleMrinal Pandey
C source files should have `//` as SPDX comment and not `/**/`. Fix this by running checkpatch on the file. Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Link: https://lore.kernel.org/r/20200724131449.zvjutbemg3vqhrzh@mrinalpandey Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29drivers: android: Fix a variable declaration coding style issueMrinal Pandey
Add a blank line after variable declarations as suggested by checkpatch. Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Link: https://lore.kernel.org/r/20200724131433.stf3ycooogawyzb3@mrinalpandey Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29drivers: android: Remove braces for a single statement if-else blockMrinal Pandey
Remove braces for both if and else block as suggested by checkpatch. Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Link: https://lore.kernel.org/r/20200724131403.dahfhdwa3wirzkxj@mrinalpandey Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29drivers: android: Remove the use of else after returnMrinal Pandey
Remove the unnecessary else branch after return statement as suggested by checkpatch. Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Link: https://lore.kernel.org/r/20200724131348.haz4ocxcferdcsgn@mrinalpandey Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29drivers: android: Fix a variable declaration coding style issueMrinal Pandey
Add a blank line after variable declarations as suggested by checkpatch. Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Link: https://lore.kernel.org/r/20200724131254.qxbvderrws36dzzq@mrinalpandey Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29binder: Prevent context manager from incrementing ref 0Jann Horn
Binder is designed such that a binder_proc never has references to itself. If this rule is violated, memory corruption can occur when a process sends a transaction to itself; see e.g. <https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>. There is a remaining edgecase through which such a transaction-to-self can still occur from the context of a task with BINDER_SET_CONTEXT_MGR access: - task A opens /dev/binder twice, creating binder_proc instances P1 and P2 - P1 becomes context manager - P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its handle table - P1 dies (by closing the /dev/binder fd and waiting a bit) - P2 becomes context manager - P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its handle table [this triggers a warning: "binder: 1974:1974 tried to acquire reference to desc 0, got 1 instead"] - task B opens /dev/binder once, creating binder_proc instance P3 - P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way transaction) - P2 receives the handle and uses it to call P3 (two-way transaction) - P3 calls P2 (via magic handle 0) (two-way transaction) - P2 calls P2 (via handle 1) (two-way transaction) And then, if P2 does *NOT* accept the incoming transaction work, but instead closes the binder fd, we get a crash. Solve it by preventing the context manager from using ACQUIRE on ref 0. There shouldn't be any legitimate reason for the context manager to do that. Additionally, print a warning if someone manages to find another way to trigger a transaction-to-self bug in the future. Cc: stable@vger.kernel.org Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Martijn Coenen <maco@android.com> Link: https://lore.kernel.org/r/20200727120424.1627555-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29greybus: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200727183258.GA28571@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: simplify mtu3_req_complete()Chunfeng Yun
Use argument req directly instead of mreq->request, they are the same usb request. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear dual mode of u3port when disable deviceChunfeng Yun
If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: use MTU3_EP_WEDGE flagChunfeng Yun
Use MTU3_EP_WEDGE flag instead of the member @wedged in mtu3_ep struct, then @wedged can be removed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: remove useless member @busy in mtu3_ep structChunfeng Yun
The member @busy in mtu3_ep struct is unnecessary, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: remove repeated error logChunfeng Yun
The caller already print error log. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: add ->udc_set_speed()Chunfeng Yun
Make use of the method to make sure connect on speeds supported by the gadget driver. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: introduce a funtion to check maximum speedChunfeng Yun
The max_speed got from DTS may be not supported by the hardware, so need check it, and assign a proper default value. And make it clear by introducing a funtion. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear interrupts status when disable interruptsChunfeng Yun
When disable interrupts, will also want to clear their status, ensure it by calling mtu3_intr_status_clear() in mtu3_intr_disable(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-19 07:12:10 +0000