summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-17staging: wilc1000: remove WILC_TimerStart()Greg Kroah-Hartman
It was a wrapper around mod_timer() so replace it with the real timer call and remove wilc_timer.c as it's now empty. Cc: Johnny Kim <johnny.kim@atmel.com> Cc: Rachel Kim <rachel.kim@atmel.com> Cc: Dean Lee <dean.lee@atmel.com> Cc: Chris Park <chris.park@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-17dmaengine: fix balance of privatecnt inc/dec operationsRobert Baldyga
This patch increments privatecnt value and set DMA_PRIVATE in device caps in dma_request_slave_channel() function. This is needed to keep privatecnt increment/decrement balance. As function dma_release_channel() decrements privatecnt counter, we need to increment it when channel is requested. Otherwise privatecnt drops into negatives after few dma_release_channel() calls. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17Merge tag 'extcon-next-for-4.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing Chanwoo writes: Update extcon for v4.3 This patchset include the function update of extcon drivers without critical update and fix minor issue of extcon drivers. Detailed description for patchset: 1. Update the extcon drivers: - Update the logic of microphone detection for extcon-arizona driver - Support GPIO based USB ID detection of extcon-palmas driver 2. Fix minor issues: - Clean code and remove the opitonal print_state() function pointer from extcon core driver - Clear interrupt bit state before requesting irq on extcon-max778433 driver - Fix signedness bugs of extcon core driver
2015-08-17Merge tag 'usb-serial-4.3-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.3-rc1 Here's a fix for a long-standing issue with the pl2303 divisor calculations that affects some non-standard baudrates that were enabled in v3.18. Adding support for newer Edgeport devices and firmware required changes to the io_ti driver and also exposed some issues with the driver's current firmware handling. Included is also a URL comment-typo fix. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - a regression caused by the conversion of IPsec ESP to the new AEAD interface: ESN with authencesn no longer works because it relied on the AD input SG list having a specific layout which is no longer the case. In linux-next authencesn is fixed properly and no longer assumes anything about the SG list format. While for this release a minimal fix is applied to authencesn so that it works with the new linear layout. - fix memory corruption caused by bogus index in the caam hash code. - fix powerpc nx SHA hashing which could cause module load failures if module signature verification is enabled" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix memory corruption in ahash_final_ctx crypto: nx - respect sg limit bounds when building sg lists for SHA crypto: authencesn - Fix breakage with new ESP code
2015-08-17perf tools: Take Intel PT into useAdrian Hunter
To record an AUX area, the weak function auxtrace_record__init() must be implemented. Equally to decode an AUX area, the AUX area tracing type must be added to the perf_event__process_auxtrace_info() function. This patch makes those two changes plus hooks up default config for the intel_pt PMU. Also some brief documentation is provided for using the tools with intel_pt. Commiter note: E.g: [root@perf4 ~]# dmesg 451 [0.405807] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [root@perf4 ~]# perf --version perf version 4.1.g53874a [root@perf4 ~]# perf record -e intel_pt//u -a sleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.383 MB perf.data ] [root@perf4 ~]# perf evlist intel_pt//u sched:sched_switch dummy:u [root@perf4 ~]# perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 0 of event 'intel_pt//u' # Event count (approx.): 0 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # # Samples: 393 of event 'sched:sched_switch' # Event count (approx.): 393 # # Overhead Command Shared Object Symbol # ........ .............. ................ .............. 49.62% swapper [kernel.vmlinux] [k] __schedule 10.69% rcu_sched [kernel.vmlinux] [k] __schedule 6.62% rcuos/0 [kernel.vmlinux] [k] __schedule 5.60% kworker/0:1 [kernel.vmlinux] [k] __schedule 3.56% rcuos/3 [kernel.vmlinux] [k] __schedule 3.05% kworker/u384:2 [kernel.vmlinux] [k] __schedule 2.54% kworker/2:0 [kernel.vmlinux] [k] __schedule 2.54% tuned [kernel.vmlinux] [k] __schedule <SNIP> # Samples: 0 of event 'dummy:u' # Event count (approx.): 0 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # Samples: 28 of event 'instructions:u' # Event count (approx.): 5030172 # # Overhead Command Shared Object Symbol # ........ .......... ................... ................................ # 21.43% tuned libpython2.7.so.1.0 [.] PyEval_EvalFrameEx | ---PyEval_EvalFrameEx | |--83.33%-- PyEval_EvalCodeEx | PyEval_EvalFrameEx | | | |--60.00%-- PyEval_EvalCodeEx | | PyEval_EvalFrameEx | | PyEval_EvalFrameEx | | | --40.00%-- PyEval_EvalFrameEx | --16.67%-- PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalFrameEx 14.29% tuned libpython2.7.so.1.0 [.] _PyType_Lookup | ---_PyType_Lookup _PyObject_GenericGetAttrWithDict PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalCodeEx PyEval_EvalFrameEx | |--75.00%-- PyEval_EvalFrameEx | --25.00%-- PyEval_EvalCodeEx PyEval_EvalFrameEx PyEval_EvalFrameEx 3.57% irqbalance irqbalance [.] 0x0000000000004038 | ---0x4038 0x4761 0x4761 0x4761 0x49f1 0x2295 3.57% irqbalance libc-2.17.so [.] __GI_____strtoull_l_internal | ---__GI_____strtoull_l_internal 0x6f49 0x229a 3.57% irqbalance libc-2.17.so [.] __strchrnul | ---__strchrnul vfprintf __vsprintf_chk __sprintf_chk 0x2724 0x4038 0x2331 3.57% irqbalance libc-2.17.so [.] __strstr_sse42 | ---__strstr_sse42 0x71e0 0x229f # And now to some userspace ftrace on uninstrumented binaries 8-) : # Hand edited to make it a bit more compact, replacing /home/acme/bin/perf # with /bin/perf: [root@perf4 ~]# perf script perf 8921 [3] 7.310889: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310889: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310889: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310889: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310890: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310890: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310890: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310890: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310893: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310893: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 4816a8 perf_evlist__enable (/bin/perf) => 4815f8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 4815fe perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310893: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310893: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310956: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310956: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310956: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310956: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310961: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310961: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310961: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310961: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.310968: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310968: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 4816a8 perf_evlist__enable (/bin/perf) => 4815f8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 4815fe perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.310968: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.310968: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311040: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311040: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481630 perf_evlist__enable (/bin/perf) => 4816d8 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 4816de perf_evlist__enable (/bin/perf) => 48164f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.311040: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311040: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311046: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311046: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481694 perf_evlist__enable (/bin/perf) => 481614 perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481652 perf_evlist__enable (/bin/perf) => 48165f perf_evlist__enable (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 481684 perf_evlist__enable (/bin/perf) => 41d250 ioctl@plt (/bin/perf) perf 8921 [3] 7.311046: 1 branches:u: 41d250 ioctl@plt (/bin/perf) => 7fcecadbf250 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311046: 1 branches:u: 7fcecadbf255 __GI___ioctl (/usr/lib64/libc-2.17.so) => 0 [unknown] ([unknown]) perf 8921 [3] 7.311050: 1 branches:u: 0 [unknown] ([unknown]) => 7fcecadbf257 __GI___ioctl (/usr/lib64/libc-2.17.so) perf 8921 [3] 7.311050: 1 branches:u: 7fcecadbf25f __GI___ioctl (/usr/lib64/libc-2.17.so) => 481689 perf_evlist__enable (/bin/perf) : Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT supportAdrian Hunter
Add support for Intel Processor Trace. Intel PT support fits within the new auxtrace infrastructure. Recording is supporting by identifying the Intel PT PMU, parsing options and setting up events. Decoding is supported by queuing up trace data by cpu or thread and then decoding synchronously delivering synthesized event samples into the session processing for tools to consume. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT decoderAdrian Hunter
Add support for decoding an Intel Processor Trace. Intel PT trace data must be 'decoded' which involves walking the object code and matching the trace data packets. The decoder requests a buffer of binary data via a get_trace() call-back, which it decodes using instruction information which it gets via another call-back walk_insn(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT logAdrian Hunter
Add a facility to log Intel Processor Trace decoding. The log is intended for debugging purposes only. The log file name is "intel_pt.log" and is opened in the current directory. The log contains a record of all packets and instructions decoded and can get very large (10 MB would be a small one). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT instruction decoderAdrian Hunter
Add support for decoding instructions for Intel Processor Trace. The kernel x86 instruction decoder is copied for this. This essentially provides intel_pt_get_insn() which takes a binary buffer, uses the kernel's x86 instruction decoder to get details of the instruction and then categorizes it for consumption by an Intel PT decoder. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add Intel PT packet decoderAdrian Hunter
Add support for decoding Intel Processor Trace packets. This essentially provides intel_pt_get_packet() which takes a buffer of binary data and returns the decoded packet. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf auxtrace: Add Intel PT as an AUX area tracing typeAdrian Hunter
Add the Intel Processor Trace type constant PERF_AUXTRACE_INTEL_PT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1437150840-31811-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf tools: Add a helper function to probe whether cpu-wide tracing is possibleAdrian Hunter
Add a helper function to probe whether cpu-wide tracing is possible. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1439458857-30636-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf symbols: Fix annotation of vdsoAdrian Hunter
Older kernels attempt to prelink vdso to its virtual address. To permit annotation using objdump, the map__rip_2objdump() calculation must result in that same address which we can infer from the start and offset of the text section. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1439556606-11297-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf annotate: Fix 32-bit compilation error in util/annotate.cAdrian Hunter
Fix the following 32-bit compilation errors: util/annotate.c: In function ‘addr_map_symbol__account_cycles’: util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=] pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n", ^ util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=] util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=] These were introduced by the patch: "perf report: Add infrastructure for a cycles histogram" Also change the 'saddr' variable from 'unsigned long' to 'u64' noting that theoretically we could be processing data captured on a 64-bit machine but processing it on a 32-bit machine. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: d4957633bf9d ("perf report: Add infrastructure for a cycles histogram") Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17perf script: Initialize callchain_param.record_modeJiri Olsa
Milian Wolff reported non functional DWARF unwind under perf script. The reason is that perf script does not properly configure callchain_param.record_mode, which is needed by unwind code. Stealing the code from report and leaving the place for more initialization code in a hope we could merge it with report__setup_sample_type one day. Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150813071724.GA21322@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17crypto: null - Add missing Kconfig tristate for NULL2Herbert Xu
This patch adds a missing tristate statement to Kconfig for the new CRYPTO_NULL2 option. Fixes: 149a39717dcc ("crypto: aead - Add type-safe geniv init/exit helpers") Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: nx - Add forward declaration for struct crypto_aeadHerbert Xu
The file nx.h has function prototypes that use struct crypto_aead. However, as crypto/aead.h is not included we don't have a definition for it. This patch adds a forward declaration to fix this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: null - Use NULL2 in MakefileHerbert Xu
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now depends indirectly on NULL2. However, the Makefile was not updated to use the new option, resulting in potential build failures when only NULL2 is enabled. Fixes: 149a39717dcc ("crypto: aead - Add type-safe geniv init/exit helpers") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: amcc - Do a NULL check for pointerFabio Estevam
Compare pointer-typed values to NULL rather than 0. The semantic patch that makes this change is available in scripts/coccinelle/null/badzero.cocci Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Remove CRYPTO_ALG_AEAD_NEW flagHerbert Xu
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Remove old AEAD interfacesHerbert Xu
Now that the AEAD conversion is complete we can rip out the old AEAD interafce and associated code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: qat - Remove reference to crypto_aead_crtHerbert Xu
The qat driver uses crypto_aead_crt in order to get the authsize. This patch replaces it with the crypto_aead_authsize helper instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: cryptd - Remove reference to crypto_aead_crtHerbert Xu
Pretty soon the crypto_aead encrypt/decrypt hooks will disappear as they are now always identical to those in struct aead_alg. This patch replaces the references to these hooks with the ones from aead_alg instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: echainiv - Use generic geniv init/exit helpersHerbert Xu
This patch replaces the echainiv init/exit handlers with the generic geniv helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Use generic geniv init/exit helpersHerbert Xu
This patch replaces the seqiv init/exit handlers with the generic geniv helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: aead - Add type-safe geniv init/exit helpersHerbert Xu
This patch adds the helpers aead_init_geniv and aead_exit_geniv which are type-safe and intended the replace the existing geniv init/exit helpers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: echainiv - Remove AEAD compatibility codeHerbert Xu
Now that we no longer have any legacy AEAD implementations the compatibility code path can no longer be triggered. This patch removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Remove AEAD compatibility codeHerbert Xu
Now that we no longer have any legacy AEAD implementations the compatibility code path can no longer be triggered. This patch removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: seqiv - Remove seqnivHerbert Xu
Now that IPsec no longer uses seqniv we can remove it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17ipsec: Replace seqniv with seqivHerbert Xu
Now that seqniv is identical with seqiv we no longer need it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-17crypto: user - Remove crypto_lookup_aead callHerbert Xu
As IV generators are now standalone AEAD transforms, we no longer need to use the crypto_lookup_aead call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17crypto: algboss - Remove reference to nivaeadHerbert Xu
This patch removes a legacy reference to nivaead which is no longer used. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17x86/smpboot: Remove APIC.wait_for_init_deassert and atomic init_deassertedLen Brown
Both the per-APIC flag ".wait_for_init_deassert", and the global atomic_t "init_deasserted" are dead code -- remove them. For all APIC types, "wait_for_master()" prevents an AP from proceeding until the BSP has set cpu_callout_mask, making "init_deasserted" {unnecessary}: BSP: <de-assert INIT> ... BSP: {set init_deasserted} AP: wait_for_master() set cpu_initialized_mask wait for cpu_callout_mask BSP: test cpu_initialized_mask BSP: set cpu_callout_mask AP: test cpu_callout_mask AP: {wait for init_deasserted} ... AP: <touch APIC> Deleting the {dead code} above is necessary to enable some parallelism in a future patch. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/de4b3a9bab894735e285870b5296da25ee6a8a5a.1439739165.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17x86/smpboot: Remove SIPI delays from cpu_up()Len Brown
MPS 1.4 example code shows the following required delays during processor on-lining: INIT udelay(10,000) SIPI udelay(200) SIPI udelay(200) /* Linux actually implements this as udelay(300) */ Linux skips the udelay(10,000) on modern processors. This patch removes the udelay(200) after each SIPI on those same processors. All three legacy delays can be restored by the cmdline "cpu_init_udelay=10000". As measured by analyze_suspend.py, this patch speeds processor resume time on my desktop from 2.4ms to 1.8ms, per AP. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/a5dfdbc8fbfdd813784da204aad5677fe459ac37.1439739165.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17x86/smpboot: Remove udelay(100) when polling cpu_callin_mapLen Brown
After the BSP sends INIT/SIPI/SIP to the AP and sees the AP in the cpu_initialized_map, it sets the AP loose via the cpu_callout_map, and waits for it via the cpu_callin_map. The BSP polls the cpu_callin_map with a udelay(100) and a schedule() in each iteration. The udelay(100) adds no value. For example, on my 4-CPU dekstop, the AP finishes cpu_callin() in under 70 usec and sets the cpu_callin_mask. The BSP, however, doesn't see that setting until over 30 usec later, because it was still running its udelay(100) when the AP finished. Deleting the udelay(100) in the cpu_callin_mask polling loop, saves from 0 to 100 usec per Application Processor. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/0aade12eabeb89a688c929fe80856eaea0544bb7.1439739165.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17x86/smpboot: Remove udelay(100) when polling cpu_initialized_mapLen Brown
After the BSP sends the APIC INIT/SIPI/SIPI to the AP, it waits for the AP to come up and indicate that it is alive by setting its own bit in the cpu_initialized_mask. Linux polls for up to 10 seconds for this to happen. Each polling loop has a udelay(100) and a call to schedule(). The udelay(100) adds no value. For example, on my desktop, the BSP waits for the other 3 CPUs to come on line at boot for 305, 404, 405 usec. For resume from S3, it waits 317, 404, 405 usec. But when the udelay(100) is removed, the BSP waits 305, 310, 306 for boot, and 305, 307, 306 for resume. So for both boot and resume, removing the udelay(100) speeds online by about 100us in 2 of 3 cases. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/33ef746c67d2489cad0a9b1958cf71167232ff2b.1439739165.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17Merge tag 'v4.2-rc7' into x86/boot, to refresh the branch before merging new ↵Ingo Molnar
changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17drm/i915: Flag the execlists context object as dirty after every useChris Wilson
Everytime we use the logical context with execlists it becomes dirty (as the hardware will write the new register values afterwards, as well as the GPU state that will be used). We need to then flag the context as dirty everytime since after a swap-out/swap-in cycle the dirty flag will be cleared, and a further swap-out cycle will then loose the most recent GPU state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-17xtensa: drop unused irq_err_countMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: implement fake NMIMax Filippov
In case perf IRQ is the highest of the medium-level IRQs, and is alone on its level, it may be treated as NMI: - LOCKLEVEL is defined to be one level less than EXCM level, - IRQ masking never lowers current IRQ level, - new fake exception cause code, EXCCAUSE_MAPPED_NMI is assigned to that IRQ; new second level exception handler, do_nmi, assigned to it handles it as NMI, - atomic operations in configurations without s32c1i still need to mask all interrupts. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: don't touch EXC_TABLE_FIXUP in _switch_toMax Filippov
There's no way _switch_to can produce double exceptions now, don't enter/leave EXC_TABLE_FIXUP critical section. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: fix kernel register spillingMax Filippov
call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: reorganize irq flags tracingMax Filippov
entry.s only disables IRQs on hardware IRQ, move trace_hardirqs_off call into do_interrupt. Check actual intlevel that will be restored on return from exception handler to decide if trace_hardirqs_on should be called. Annotate IRQ on/off points in the TIF_* handling loop on return from exception handler. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17perf tools: xtensa: add DWARF register namesMax Filippov
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: implement counting and sampling perf eventsMax Filippov
Xtensa Performance Monitor Module has up to 8 32 bit wide performance counters. Each counter may be enabled independently and can count any single type of hardware performance events. Event counting may be enabled and disabled globally (per PMM). Each counter has status register with bits indicating if the counter has been overflown and may be programmed to raise profiling IRQ on overflow. This IRQ is used to rewind counters and allow for counting more than 2^32 samples for counting events and to report samples for sampling events. For more details see Tensilica Debug User's Guide, chapter 8 "Performance monitor module". Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: count software page fault perf eventsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: add profiling IRQ type to xtensa_irq_mapMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: select PERF_USE_VMALLOC for cache-aliasing configurationsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: move oprofile stack tracing to stacktrace.cMax Filippov
Old oprofile interface will share user stack tracing with new perf interface. Move oprofile user/kernel stack tracing to stacktrace.c to make it possible. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-22 11:50:26 +0000