summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-29net: phy: sfp: correct store of detected link modesBaruch Siach
The link modes that sfp_parse_support() detects are stored in the 'modes' bitmap. There is no reason to make an exception for 1000Base-PX or 1000Base-BX10. Fixes: 03145864bd0f ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29qede - Add a statistic for a case where driver drops tx packet due to memory ↵Michael Shteinbok
allocation failure. skb_linearization can fail due to memory allocation failure. In such a case, the driver will drop the packet. In such a case The driver used to print an error message. This patch replaces this error message by a dedicated statistic. Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29dpaa2-eth: Add "fall through" commentsIoana Ciocoi Radulescu
Add comments in the switch statement for XDP action to indicate fallthrough is intended. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29Merge branch 'ave-fixes'David S. Miller
Kunihiko Hayashi says: ==================== fixup AVE ethernet driver This series adds fixup for AVE ethernet driver that includes increse of descriptors, replacing macro for linux-next, and adding missing author information. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Add MODULE_AUTHOR and MAINTAINERS entryKunihiko Hayashi
Add missing MODULE_AUTHOR of ave driver and an entry to MAINTAINERS. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOMKunihiko Hayashi
In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"), AVE controller affects this modification because the controller forces to ignore lower 2bits of buffer start address, and make 2-byte headroom, that is, data reception starts from (buffer + 2). This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value, and replaces NET_IP_ALIGN with it. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Increase descriptors to improve performanceKunihiko Hayashi
To improve performance, this increases Rx descriptor to 256, Tx descriptor to 64, and adjusts NAPI weight to NAPI_POLL_WEIGHT. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29Merge branch 'ave-suspend-resume'David S. Miller
Kunihiko Hayashi says: ==================== Add suspend/resume support for AVE ethernet driver This series adds support for suspend/resume to AVE ethernet driver. And to avoid the error that wol state of phy hardware is enabled by default, this sets initial wol state to disabled and add preservation the state in suspend/resume sequence. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Preserve wol state in suspend/resume sequenceKunihiko Hayashi
Since the wol state forces to be initialized after reset, the state should be preserved in suspend/resume sequence. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Set initial wol state to disabledKunihiko Hayashi
If wol state of phy hardware is enabled after reset, phy_ethtool_get_wol() returns that wol.wolopts is true. However, since net_device.wol_enabled is zero and this doesn't apply wol state until calling ethtool_set_wol(), so mdio_bus_phy_may_suspend() returns true, that is, it's in a state where phy can suspend even though wol state is enabled. In this inconsistency, phy_suspend() returns -EBUSY, and at last, suspend sequence fails with the following message: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x58 returns -16 PM: Device 65000000.ethernet-ffffffff:01 failed to suspend: error -16 PM: Some devices failed to suspend, or early wake event detected In order to fix the above issue, this patch forces to set initial wol state to disabled as default. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Add suspend/resume supportKunihiko Hayashi
This patch introduces suspend and resume functions to ave driver. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29Merge tag 'selinux-pr-20181129' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fix from Paul Moore: "One more SELinux fix for v4.20: add some missing netlink message to SELinux permission mappings. The netlink messages were added in v4.19, but unfortunately we didn't catch it then because the mechanism to catch these things was bypassed. In addition to adding the mappings, we're adding some comments to the code to hopefully prevent bypasses in the future" * tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN
2018-11-29Merge tag 's390-4.20-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Add two missing kfree calls on error paths in the vfio-ccw code - Make sure that all data structures of a mediated vfio-ccw device are initialized before registering it - Fix a sparse warning in vfio-ccw - A followup patch for the pgtable_bytes accounting, the page table downgrade for compat processes missed a mm_dec_nr_pmds() - Reject sampling requests in the PMU init function of the CPU measurement counter facility - With the vfio AP driver an AP queue needs to be reset on every device probe as the alternative driver could have modified the device state * tag 's390-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: correct pgtable_bytes on page table downgrade s390/zcrypt: reinit ap queue state machine during device probe s390/cpum_cf: Reject request for sampling in event initialization s390/cio: Fix cleanup when unsupported IDA format is used s390/cio: Fix cleanup of pfn_array alloc failure vfio: ccw: Register mediated device once all structures are initialized s390/cio: make vfio_ccw_io_region static
2018-11-29Merge tag 'sound-4.20-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "As a usual pattern, we've got relatively large updates at rc5: - A fix for races in ALSA control user elements - ASoC DAPM regression due to component refactoring - A fix in error handling of ASoC iteration macro - ASoC Intel SST Skylake kconfig fix; a new Kconfig will appear as a consequence, but in the end it's a good cleanup - HD-audio and USB-audio quirks as always - Assort of ASoC driver fixes (pcm186x, Intel cht, rockchip, pcm3060, rsnd, omap, wm_adsp, qcom, sunxi, stm32)" * tag 'sound-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (34 commits) ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock ALSA: hda/realtek - Support ALC300 ALSA: hda/realtek - Add auto-mute quirk for HP Spectre x360 laptop ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops ALSA: control: Fix race between adding and removing a user element ALSA: sparc: Fix invalid snd_free_pages() at error path ALSA: wss: Fix invalid snd_free_pages() at error path ALSA: hda/realtek - fix headset mic detection for MSI MS-B171 ALSA: hda: Add ASRock N68C-S UCC the power_save blacklist ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE ASoC: omap-mcbsp: Fix latency value calculation for pm_qos ASoC: acpi: fix: continue searching when machine is ignored ASoC: Intel: Skylake: fix Kconfigs, make HDaudio codec optional MAINTAINERS: add ASoC maintainers for sound dt-bindings ASoC: pcm186x: Fix device reset-registers trigger value ASoC: dapm: Recalculate audio map forcely when card instantiated ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing ASoC: pcm3060: Rename output widgets ...
2018-11-29Merge tag 'fixes_for_v4.20-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2 and udf fixes from Jan Kara: "Three small ext2 and udf fixes" * tag 'fixes_for_v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: fix potential use after free ext2: initialize opts.s_mount_opt as zero before using it udf: Allow mounting volumes with incorrect identification strings
2018-11-29pvcalls-front: fixes incorrect error handlingPan Bian
kfree() is incorrectly used to release the pages allocated by __get_free_page() and __get_free_pages(). Use the matching deallocators i.e., free_page() and free_pages(), respectively. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-29Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"Igor Druzhinin
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f. That commit unintentionally broke Xen balloon memory hotplug with "hotplug_unpopulated" set to 1. As long as "System RAM" resource got assigned under a new "Unusable memory" resource in IO/Mem tree any attempt to online this memory would fail due to general kernel restrictions on having "System RAM" resources as 1st level only. The original issue that commit has tried to workaround fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move and shrink AMD 64-bit window to avoid conflict") which made the original fix to Xen ballooning unnecessary. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-29xen: xlate_mmu: add missing header to fix 'W=1' warningSrikanth Boddepalli
Add a missing header otherwise compiler warns about missed prototype: drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes] int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma, ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Srikanth Boddepalli <boddepalli.srikanth@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-29xen/x86: add diagnostic printout to xen_mc_flush() in case of errorJuergen Gross
Failure of an element of a Xen multicall is signalled via a WARN() only if the kernel is compiled with MC_DEBUG. It is impossible to know which element failed and why it did so. Change that by printing the related information even without MC_DEBUG, even if maybe in some limited form (e.g. without information which caller produced the failing element). Move the printing out of the switch statement in order to have the same information for a single call. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-29arm64: ftrace: Fix to enable syscall events on arm64Masami Hiramatsu
Since commit 4378a7d4be30 ("arm64: implement syscall wrappers") introduced "__arm64_" prefix to all syscall wrapper symbols in sys_call_table, syscall tracer can not find corresponding metadata from syscall name. In the result, we have no syscall ftrace events on arm64 kernel, and some bpf testcases are failed on arm64. To fix this issue, this introduces custom arch_syscall_match_sym_name() which skips first 8 bytes when comparing the syscall and symbol names. Fixes: 4378a7d4be30 ("arm64: implement syscall wrappers") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-29arm64: Add workaround for Cortex-A76 erratum 1286807Catalin Marinas
On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual address for a cacheable mapping of a location is being accessed by a core while another core is remapping the virtual address to a new physical page using the recommended break-before-make sequence, then under very rare circumstances TLBI+DSB completes before a read using the translation being invalidated has been observed by other observers. The workaround repeats the TLBI+DSB operation and is shared with the Qualcomm Falkor erratum 1009 Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-29selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAINPaul Moore
Commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") added new RTM_* definitions without properly updating SELinux, this patch adds the necessary SELinux support. While there was a BUILD_BUG_ON() in the SELinux code to protect from exactly this case, it was bypassed in the broken commit. In order to hopefully prevent this from happening in the future, add additional comments which provide some instructions on how to resolve the BUILD_BUG_ON() failures. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Cc: <stable@vger.kernel.org> # 4.19 Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-29brcmfmac: Fix out of bounds memory access during fw loadLyude Paul
I ended up tracking down some rather nasty issues with f2fs (and other filesystem modules) constantly crashing on my kernel down to a combination of out of bounds memory accesses, one of which was coming from brcmfmac during module load: [ 30.891382] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [ 30.894437] ================================================================== [ 30.901581] BUG: KASAN: global-out-of-bounds in brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac] [ 30.909935] Read of size 1 at addr ffff2000024865df by task kworker/6:2/387 [ 30.916805] [ 30.918261] CPU: 6 PID: 387 Comm: kworker/6:2 Tainted: G O 4.20.0-rc3Lyude-Test+ #19 [ 30.927251] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 30.935964] Workqueue: events brcmf_driver_register [brcmfmac] [ 30.941641] Call trace: [ 30.944058] dump_backtrace+0x0/0x3e8 [ 30.947676] show_stack+0x14/0x20 [ 30.950968] dump_stack+0x130/0x1c4 [ 30.954406] print_address_description+0x60/0x25c [ 30.959066] kasan_report+0x1b4/0x368 [ 30.962683] __asan_report_load1_noabort+0x18/0x20 [ 30.967547] brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac] [ 30.967639] brcmf_sdio_probe+0x163c/0x2050 [brcmfmac] [ 30.978035] brcmf_ops_sdio_probe+0x598/0xa08 [brcmfmac] [ 30.983254] sdio_bus_probe+0x190/0x398 [ 30.983270] really_probe+0x2a0/0xa70 [ 30.983296] driver_probe_device+0x1b4/0x2d8 [ 30.994901] __driver_attach+0x200/0x280 [ 30.994914] bus_for_each_dev+0x10c/0x1a8 [ 30.994925] driver_attach+0x38/0x50 [ 30.994935] bus_add_driver+0x330/0x608 [ 30.994953] driver_register+0x140/0x388 [ 31.013965] sdio_register_driver+0x74/0xa0 [ 31.014076] brcmf_sdio_register+0x14/0x60 [brcmfmac] [ 31.023177] brcmf_driver_register+0xc/0x18 [brcmfmac] [ 31.023209] process_one_work+0x654/0x1080 [ 31.032266] worker_thread+0x4f0/0x1308 [ 31.032286] kthread+0x2a8/0x320 [ 31.039254] ret_from_fork+0x10/0x1c [ 31.039269] [ 31.044226] The buggy address belongs to the variable: [ 31.044351] brcmf_firmware_path+0x11f/0xfffffffffffd3b40 [brcmfmac] [ 31.055601] [ 31.057031] Memory state around the buggy address: [ 31.061800] ffff200002486480: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 31.068983] ffff200002486500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.068993] >ffff200002486580: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 31.068999] ^ [ 31.069017] ffff200002486600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 31.096521] ffff200002486680: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa [ 31.096528] ================================================================== [ 31.096533] Disabling lock debugging due to kernel taint It appears that when trying to determine the length of the string in the alternate firmware path, we make the mistake of not handling the case where the firmware path is empty correctly. Since strlen(mp_path) can return 0, we'll end up accessing mp_path[-1] when the firmware_path isn't provided through the module arguments. So, fix this by just setting the end char to '\0' by default, and only changing it if we have a non-zero length. Additionally, use strnlen() with BRCMF_FW_ALTPATH_LEN instead of strlen() just to be extra safe. Fixes: 2baa3aaee27f ("brcmfmac: introduce brcmf_fw_alloc_request() function") Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Dan Haab <dhaab@luxul.com> Cc: Jia-Shyr Chuang <saint.chuang@cypress.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmfmac: Call brcmf_dmi_probe before brcmf_of_probeHans de Goede
ARM systems with UEFI may have both devicetree (of) and DMI data in this case we end up setting brcmf_mp_device.board_type twice. In this case we should prefer the devicetree data, because: 1) The devicerree data is more reliable 2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and classic uboot booting, the devicetree data is always there, so using it makes sure we ask for the same nvram file independent of how we booted. This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe call, so that the latter can override the value of the first if both are set. Fixes: bd1e82bb420a ("brcmfmac: Set board_type from DMI on x86 based ...") Cc: Peter Robinson <pbrobinson@gmail.com> Tested-and-reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmfmac: support STA info struct v7Dan Haab
The newest firmwares provide STA info using v7 of the struct. As v7 isn't backward compatible, a union is needed. Even though brcmfmac does not use any of the new info it's important to provide the proper struct buffer. Without this change new firmwares will fallback to the very limited v3 instead of something in between such as v4. Signed-off-by: Dan Haab <dan.haab@luxul.com> Reviewed-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29b43: Use cordic algorithm from kernel libraryPriit Laes
Kernel library has a common cordic algorithm which is identical to internally implemented one, so use it and drop the duplicate implementation. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29b43: Fix error in cordic routineLarry Finger
The cordic routine for calculating sines and cosines that was added in commit 6f98e62a9f1b ("b43: update cordic code to match current specs") contains an error whereby a quantity declared u32 can in fact go negative. This problem was detected by Priit Laes who is switching b43 to use the routine in the library functions of the kernel. Fixes: 986504540306 ("b43: make cordic common (LP-PHY and N-PHY need it)") Reported-by: Priit Laes <plaes@plaes.org> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> # 2.6.34 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29brcmsmac: Use cordic-related macros from common cordic libraryPriit Laes
Current driver includes macro that is available from general cordic library. Use that and drop unused duplicate and unneeded internal definitions. Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29lib: cordic: Move cordic macros and defines to header filePriit Laes
Now that these macros are in header file, we can eventually clean up the duplicate macros present in the drivers that utilize the same cordic algorithm implementation. Also add CORDIC_ prefix to nonprefixed macros. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-29dmaengine: at_hdmac: fix module unloadingRichard Genoud
of_dma_controller_free() was not called on module onloading. This lead to a soft lockup: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! Modules linked in: at_hdmac [last unloaded: at_hdmac] when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate(). Cc: stable@vger.kernel.org Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-29dmaengine: at_hdmac: fix memory leak in at_dma_xlate()Richard Genoud
The leak was found when opening/closing a serial port a great number of time, increasing kmalloc-32 in slabinfo. Each time the port was opened, dma_request_slave_channel() was called. Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and never freed. (Well, it was free at module unload, but that's not what we want). So, here, kzalloc is more suited for the job since it has to be freed in atc_free_chan_resources(). Cc: stable@vger.kernel.org Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Reported-by: Mario Forner <m.forner@be4energy.com> Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-29powerpc/msi: Fix NULL pointer access in teardown codeRadu Rendec
The arch_teardown_msi_irqs() function assumes that controller ops pointers were already checked in arch_setup_msi_irqs(), but this assumption is wrong: arch_teardown_msi_irqs() can be called even when arch_setup_msi_irqs() returns an error (-ENOSYS). This can happen in the following scenario: - msi_capability_init() calls pci_msi_setup_msi_irqs() - pci_msi_setup_msi_irqs() returns -ENOSYS - msi_capability_init() notices the error and calls free_msi_irqs() - free_msi_irqs() calls pci_msi_teardown_msi_irqs() This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs(). The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure seems legit, as it does additional cleanup; e.g. list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs() is called and need to be cleaned up if that fails). Fixes: 6b2fd7efeb88 ("PCI/MSI/PPC: Remove arch_msi_check_device()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-29ALSA: pcm: Fix interval evaluation with openmin/maxTakashi Iwai
As addressed in alsa-lib (commit b420056604f0), we need to fix the case where the evaluation of PCM interval "(x x+1]" leading to -EINVAL. After applying rules, such an interval may be translated as "(x x+1)". Fixes: ff2d6acdf6f1 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29Merge tag 'fixes-for-v4.20-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v4.20-rc4 In this second set of fixes for the current -rc cycle, we have some regressions fixes for the old omap_udc driver done by Aaro Koskinen. We're also reverting an old patch on dwc3 which is, now, known to break USB certification in some cases. We have a fix on u_ether for an unsafe list iteration. * tag 'fixes-for-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: u_ether: fix unsafe list iteration USB: omap_udc: fix rejection of out transfers when DMA is used USB: omap_udc: fix USB gadget functionality on Palm Tungsten E USB: omap_udc: fix omap_udc_start() on 15xx machines USB: omap_udc: fix crashes on probe error and module removal USB: omap_udc: use devm_request_irq() Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
2018-11-29ALSA: hda: Add support for AMD Stoney RidgeKai-Heng Feng
It's similar to other AMD audio devices, it also supports D3, which can save some power drain. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29Merge tag 'iwlwifi-next-for-kalle-2018-11-23' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next second batch of iwlwifi patches intended for v4.21 * New FW debugging infrastructure; * Some more work on 802.11ax; * Improve support for multiple RF modules with 22000 devices; * Remove an unused FW parameter; * Other debugging improvements;
2018-11-29ALSA: usb-audio: Add SMSL D1 to quirks for native DSD supportTony Das
This patch adds quirk VID/PID IDs for the SMSL D1 in order to enable Native DSD support. [ Moved the added entry in numerical order -- tiwai ] Signed-off-by: Tony Das <tdas444@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28Merge tag 'linux-can-next-for-4.21-20181128' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== This is a pull request for net-next/master consisting of 18 patches. The first patch is by Colin Ian King and fixes the spelling in the ucan driver. The next three patches target the xilinx driver. YueHaibing's patch fixes the return type of ndo_start_xmit function. Two patches by Shubhrajyoti Datta add support for the CAN FD 2.0 controllers. Flavio Suligoi's patch for the sja1000 driver add support for the ASEM CAN raw hardware. Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to use SPDX license identifiers. The remaining 111 patches improve the flexcan driver. Pankaj Bansal's patch enables the driver in Kconfig on all architectures with IOMEM support. The next four patches by me fix indention, add missing parentheses and comments. Aisheng Dong's patches add self wake support and document it in the DT bindings. The remaining patches by Pankaj Bansal first fix the loopback support and prepare the driver for the CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support will be added in a later patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29ALSA: pcm: Fix starvation on down_write_nonblock()Chanho Min
Commit 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") fixes deadlock for non-atomic PCM stream. But, This patch causes antother stuck. If writer is RT thread and reader is a normal thread, the reader thread will be difficult to get scheduled. It may not give chance to release readlocks and writer gets stuck for a long time if they are pinned to single cpu. The deadlock described in the previous commit is because the linux rwsem queues like a FIFO. So, we might need non-FIFO writelock, not non-block one. My suggestion is that the writer gives reader a chance to be scheduled by using the minimum msleep() instaed of spinning without blocking by writer. Also, The *_nonblock may be changed to *_nonfifo appropriately to this concept. In terms of performance, when trylock is failed, this minimum periodic msleep will have the same performance as the tick-based schedule()/wake_up_q(). [ Although this has a fairly high performance penalty, the relevant code path became already rare due to the previous commit ("ALSA: pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now this unconditional msleep appears only when using linked streams, and this must be a rare case. So we accept this as a quick workaround until finding a more suitable one -- tiwai ] Fixes: 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") Suggested-by: Wonmin Jung <wonmin.jung@lge.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29ALSA: pcm: Call snd_pcm_unlink() conditionally at closingTakashi Iwai
Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning. Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous. As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed. Reported-by: Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29crypto: do not free algorithm before usingPan Bian
In multiple functions, the algorithm fields are read after its reference is dropped through crypto_mod_put. In this case, the algorithm memory may be freed, resulting in use-after-free bugs. This patch delays the put operation until the algorithm is never used. Fixes: 79c65d179a40 ("crypto: cbc - Convert to skcipher") Fixes: a7d85e06ed80 ("crypto: cfb - add support for Cipher FeedBack mode") Fixes: 043a44001b9e ("crypto: pcbc - Convert to skcipher") Cc: <stable@vger.kernel.org> Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28scsi: storvsc: Fix a race in sub-channel creation that can cause panicDexuan Cui
We can concurrently try to open the same sub-channel from 2 paths: path #1: vmbus_onoffer() -> vmbus_process_offer() -> handle_sc_creation(). path #2: storvsc_probe() -> storvsc_connect_to_vsp() -> -> storvsc_channel_init() -> handle_multichannel_storage() -> -> vmbus_are_subchannels_present() -> handle_sc_creation(). They conflict with each other, but it was not an issue before the recent commit ae6935ed7d42 ("vmbus: split ring buffer allocation from open"), because at the beginning of vmbus_open() we checked newchannel->state so only one path could succeed, and the other would return with -EINVAL. After ae6935ed7d42, the failing path frees the channel's ringbuffer by vmbus_free_ring(), and this causes a panic later. Commit ae6935ed7d42 itself is good, and it just reveals the longstanding race. We can resolve the issue by removing path #2, i.e. removing the second vmbus_are_subchannels_present() in handle_multichannel_storage(). BTW, the comment "Check to see if sub-channels have already been created" in handle_multichannel_storage() is incorrect: when we unload the driver, we first close the sub-channel(s) and then close the primary channel, next the host sends rescind-offer message(s) so primary->sc_list will become empty. This means the first vmbus_are_subchannels_present() in handle_multichannel_storage() is never useful. Fixes: ae6935ed7d42 ("vmbus: split ring buffer allocation from open") Cc: stable@vger.kernel.org Cc: Long Li <longli@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28tools: bpftool: fix a bitfield pretty print issueYonghong Song
Commit b12d6ec09730 ("bpf: btf: add btf print functionality") added btf pretty print functionality to bpftool. There is a problem though in printing a bitfield whose type has modifiers. For example, for a type like typedef int ___int; struct tmp_t { int a:3; ___int b:3; }; Suppose we have a map struct bpf_map_def SEC("maps") tmpmap = { .type = BPF_MAP_TYPE_HASH, .key_size = sizeof(__u32), .value_size = sizeof(struct tmp_t), .max_entries = 1, }; and the hash table is populated with one element with key 0 and value (.a = 1 and .b = 2). In BTF, the struct member "b" will have a type "typedef" which points to an int type. The current implementation does not pass the bit offset during transition from typedef to int type, hence incorrectly print the value as $ bpftool m d id 79 [{ "key": 0, "value": { "a": 0x1, "b": 0x1 } } ] This patch fixed the issue by carrying bit_offset along the type chain during bit_field print. The correct result can be printed as $ bpftool m d id 76 [{ "key": 0, "value": { "a": 0x1, "b": 0x2 } } ] The kernel pretty print is implemented correctly and does not have this issue. Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-29Merge tag 'drm-misc-fixes-2018-11-28-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - mst: Don't try to validate ports while destroying them (Lyude) - Revert: Don't try to validate ports while destroying them (Lyude) - core: Don't set device to master unless set_master succeeds (Sergio) - meson: Do vblank_on/off on enable/disable (Neil) - meson: Use fast_io regmap option to avoid sleeping in irq ctx (Lyude) - meson: Don't walk off the end of the OSD EOTF LUTs (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Sergio Correia <sergio@correia.cc> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212936.GA21379@art_vandelay
2018-11-28bpf: Fix various lib and testsuite build failures on 32-bit.David Miller
Cannot cast a u64 to a pointer on 32-bit without an intervening (long) cast otherwise GCC warns. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-29Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.20. Nothing major. - DC DP MST fix - GPUVM fix for huge page mapping - RLC fix for vega20 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128195905.2897-1-alexander.deucher@amd.com
2018-11-28Merge branch 'btf-check-name'Alexei Starovoitov
Yonghong Song says: ==================== This patch set added name checking for PTR, ARRAY, VOLATILE, TYPEDEF, CONST, RESTRICT, STRUCT, UNION, ENUM and FWD types. Such a strict name checking makes BTF more sound in the kernel and future BTF-to-header-file converesion ([1]) less fragile. Patch #1 implemented btf_name_valid_identifier() for name checking which will be used in Patch #2. Patch #2 checked name validity for the above mentioned types. Patch #3 fixed two existing test_btf unit tests exposed by the strict name checking. Patch #4 added additional test cases. This patch set is against bpf tree. Patch #1 has been implemented in bpf-next commit Commit 2667a2626f4d ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO"), so there is no need to apply this patch to bpf-next. In case this patch is applied to bpf-next, there will be a minor conflict like diff --cc kernel/bpf/btf.c index a09b2f94ab25,93c233ab2db6..000000000000 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@@ -474,7 -451,7 +474,11 @@@ static bool btf_name_valid_identifier(c return !*src; } ++<<<<<<< HEAD +const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++======= + static const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++>>>>>>> fa9566b0847d... bpf: btf: implement btf_name_valid_identifier() { if (!offset) return "(anon)"; Just resolve the conflict by taking the "const char ..." line. Patches #2, #3 and #4 can be applied to bpf-next without conflict. [1]: http://vger.kernel.org/lpc-bpf2018.html#session-2 ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-28tools/bpf: add addition type tests to test_btfYonghong Song
The following additional unit testcases are added to test_btf: ... BTF raw test[42] (typedef (invalid name, name_off = 0)): OK BTF raw test[43] (typedef (invalid name, invalid identifier)): OK BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK BTF raw test[46] (const type (invalid name, name_off <> 0)): OK BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK BTF raw test[50] (array type (invalid name, name_off <> 0)): OK BTF raw test[51] (struct type (name_off = 0)): OK BTF raw test[52] (struct type (invalid name, invalid identifier)): OK BTF raw test[53] (struct member (name_off = 0)): OK BTF raw test[54] (struct member (invalid name, invalid identifier)): OK BTF raw test[55] (enum type (name_off = 0)): OK BTF raw test[56] (enum type (invalid name, invalid identifier)): OK BTF raw test[57] (enum member (invalid name, name_off = 0)): OK BTF raw test[58] (enum member (invalid name, invalid identifier)): OK ... Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-28tools/bpf: fix two test_btf unit test casesMartin KaFai Lau
There are two unit test cases, which should encode TYPEDEF type, but instead encode PTR type. The error is flagged out after enforcing name checking in the previous patch. Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 05:39:18 +0000