summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-11bcachefs: Fix use after freeAlan Huang
acc->k.data should be used with the lock hold: 00221 ========= TEST generic/187 00221 run fstests generic/187 at 2025-02-09 21:08:10 00221 spectre-v4 mitigation disabled by command-line option 00222 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro 00222 bcachefs (vdc): initializing new filesystem 00222 bcachefs (vdc): going read-write 00222 bcachefs (vdc): marking superblocks 00222 bcachefs (vdc): initializing freespace 00222 bcachefs (vdc): done initializing freespace 00222 bcachefs (vdc): reading snapshots table 00222 bcachefs (vdc): reading snapshots done 00222 bcachefs (vdc): done starting filesystem 00222 bcachefs (vdc): shutting down 00222 bcachefs (vdc): going read-only 00222 bcachefs (vdc): finished waiting for writes to stop 00223 bcachefs (vdc): flushing journal and stopping allocators, journal seq 6 00223 bcachefs (vdc): flushing journal and stopping allocators complete, journal seq 8 00223 bcachefs (vdc): clean shutdown complete, journal seq 9 00223 bcachefs (vdc): marking filesystem clean 00223 bcachefs (vdc): shutdown complete 00223 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro 00223 bcachefs (vdc): initializing new filesystem 00223 bcachefs (vdc): going read-write 00223 bcachefs (vdc): marking superblocks 00223 bcachefs (vdc): initializing freespace 00223 bcachefs (vdc): done initializing freespace 00223 bcachefs (vdc): reading snapshots table 00223 bcachefs (vdc): reading snapshots done 00223 bcachefs (vdc): done starting filesystem 00244 hrtimer: interrupt took 123350440 ns 00264 bcachefs (vdc): shutting down 00264 bcachefs (vdc): going read-only 00264 bcachefs (vdc): finished waiting for writes to stop 00264 bcachefs (vdc): flushing journal and stopping allocators, journal seq 97 00265 bcachefs (vdc): flushing journal and stopping allocators complete, journal seq 101 00265 bcachefs (vdc): clean shutdown complete, journal seq 102 00265 bcachefs (vdc): marking filesystem clean 00265 bcachefs (vdc): shutdown complete 00265 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro 00265 bcachefs (vdc): recovering from clean shutdown, journal seq 102 00265 bcachefs (vdc): accounting_read... 00265 ================================================================== 00265 done 00265 BUG: KASAN: slab-use-after-free in bch2_fs_to_text+0x12b4/0x1728 00265 bcachefs (vdc): alloc_read... done 00265 bcachefs (vdc): stripes_read... done 00265 Read of size 4 at addr ffffff80c57eac00 by task cat/7531 00265 bcachefs (vdc): snapshots_read... done 00265 00265 CPU: 6 UID: 0 PID: 7531 Comm: cat Not tainted 6.13.0-rc3-ktest-g16fc6fa3819d #14103 00265 Hardware name: linux,dummy-virt (DT) 00265 Call trace: 00265 show_stack+0x1c/0x30 (C) 00265 dump_stack_lvl+0x6c/0x80 00265 print_report+0xf8/0x5d8 00265 kasan_report+0x90/0xd0 00265 __asan_report_load4_noabort+0x1c/0x28 00265 bch2_fs_to_text+0x12b4/0x1728 00265 bch2_fs_show+0x94/0x188 00265 sysfs_kf_seq_show+0x1a4/0x348 00265 kernfs_seq_show+0x12c/0x198 00265 seq_read_iter+0x27c/0xfd0 00265 kernfs_fop_read_iter+0x390/0x4f8 00265 vfs_read+0x480/0x7f0 00265 ksys_read+0xe0/0x1e8 00265 __arm64_sys_read+0x70/0xa8 00265 invoke_syscall.constprop.0+0x74/0x1e8 00265 do_el0_svc+0xc8/0x1c8 00265 el0_svc+0x20/0x60 00265 el0t_64_sync_handler+0x104/0x130 00265 el0t_64_sync+0x154/0x158 00265 00265 Allocated by task 7510: 00265 kasan_save_stack+0x28/0x50 00265 kasan_save_track+0x1c/0x38 00265 kasan_save_alloc_info+0x3c/0x50 00265 __kasan_kmalloc+0xac/0xb0 00265 __kmalloc_node_noprof+0x168/0x348 00265 __kvmalloc_node_noprof+0x20/0x140 00265 __bch2_darray_resize_noprof+0x90/0x1b0 00265 __bch2_accounting_mem_insert+0x76c/0xb08 00265 bch2_accounting_mem_insert+0x224/0x3b8 00265 bch2_accounting_mem_mod_locked+0x480/0xc58 00265 bch2_accounting_read+0xa94/0x3eb8 00265 bch2_run_recovery_pass+0x80/0x178 00265 bch2_run_recovery_passes+0x340/0x698 00265 bch2_fs_recovery+0x1c98/0x2bd8 00265 bch2_fs_start+0x240/0x490 00265 bch2_fs_get_tree+0xe1c/0x1458 00265 vfs_get_tree+0x7c/0x250 00265 path_mount+0xe24/0x1648 00265 __arm64_sys_mount+0x240/0x438 00265 invoke_syscall.constprop.0+0x74/0x1e8 00265 do_el0_svc+0xc8/0x1c8 00265 el0_svc+0x20/0x60 00265 el0t_64_sync_handler+0x104/0x130 00265 el0t_64_sync+0x154/0x158 00265 00265 Freed by task 7510: 00265 kasan_save_stack+0x28/0x50 00265 kasan_save_track+0x1c/0x38 00265 kasan_save_free_info+0x48/0x88 00265 __kasan_slab_free+0x48/0x60 00265 kfree+0x188/0x408 00265 kvfree+0x3c/0x50 00265 __bch2_darray_resize_noprof+0xe0/0x1b0 00265 __bch2_accounting_mem_insert+0x76c/0xb08 00265 bch2_accounting_mem_insert+0x224/0x3b8 00265 bch2_accounting_mem_mod_locked+0x480/0xc58 00265 bch2_accounting_read+0xa94/0x3eb8 00265 bch2_run_recovery_pass+0x80/0x178 00265 bch2_run_recovery_passes+0x340/0x698 00265 bch2_fs_recovery+0x1c98/0x2bd8 00265 bch2_fs_start+0x240/0x490 00265 bch2_fs_get_tree+0xe1c/0x1458 00265 vfs_get_tree+0x7c/0x250 00265 path_mount+0xe24/0x1648 00265 bcachefs (vdc): going read-write 00265 __arm64_sys_mount+0x240/0x438 00265 invoke_syscall.constprop.0+0x74/0x1e8 00265 do_el0_svc+0xc8/0x1c8 00265 el0_svc+0x20/0x60 00265 el0t_64_sync_handler+0x104/0x130 00265 el0t_64_sync+0x154/0x158 00265 00265 The buggy address belongs to the object at ffffff80c57eac00 00265 which belongs to the cache kmalloc-128 of size 128 00265 The buggy address is located 0 bytes inside of 00265 freed 128-byte region [ffffff80c57eac00, ffffff80c57eac80) 00265 00265 The buggy address belongs to the physical page: 00265 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1057ea 00265 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 00265 flags: 0x8000000000000040(head|zone=2) 00265 page_type: f5(slab) 00265 raw: 8000000000000040 ffffff80c0002800 dead000000000100 dead000000000122 00265 raw: 0000000000000000 0000000000200020 00000001f5000000 ffffff80c57a6400 00265 head: 8000000000000040 ffffff80c0002800 dead000000000100 dead000000000122 00265 head: 0000000000000000 0000000000200020 00000001f5000000 ffffff80c57a6400 00265 head: 8000000000000001 fffffffec315fa81 ffffffffffffffff 0000000000000000 00265 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 00265 page dumped because: kasan: bad access detected 00265 00265 Memory state around the buggy address: 00265 ffffff80c57eab00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00265 ffffff80c57eab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc 00265 >ffffff80c57eac00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb 00265 ^ 00265 ffffff80c57eac80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc 00265 ffffff80c57ead00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc 00265 ================================================================== 00265 Kernel panic - not syncing: kasan.fault=panic set ... 00265 CPU: 6 UID: 0 PID: 7531 Comm: cat Not tainted 6.13.0-rc3-ktest-g16fc6fa3819d #14103 00265 Hardware name: linux,dummy-virt (DT) 00265 Call trace: 00265 show_stack+0x1c/0x30 (C) 00265 dump_stack_lvl+0x30/0x80 00265 dump_stack+0x18/0x20 00265 panic+0x4d4/0x518 00265 start_report.constprop.0+0x0/0x90 00265 kasan_report+0xa0/0xd0 00265 __asan_report_load4_noabort+0x1c/0x28 00265 bch2_fs_to_text+0x12b4/0x1728 00265 bch2_fs_show+0x94/0x188 00265 sysfs_kf_seq_show+0x1a4/0x348 00265 kernfs_seq_show+0x12c/0x198 00265 seq_read_iter+0x27c/0xfd0 00265 kernfs_fop_read_iter+0x390/0x4f8 00265 vfs_read+0x480/0x7f0 00265 ksys_read+0xe0/0x1e8 00265 __arm64_sys_read+0x70/0xa8 00265 invoke_syscall.constprop.0+0x74/0x1e8 00265 do_el0_svc+0xc8/0x1c8 00265 el0_svc+0x20/0x60 00265 el0t_64_sync_handler+0x104/0x130 00265 el0t_64_sync+0x154/0x158 00265 SMP: stopping secondary CPUs 00265 Kernel Offset: disabled 00265 CPU features: 0x000,00000070,00000010,8240500b 00265 Memory Limit: none 00265 ---[ end Kernel panic - not syncing: kasan.fault=panic set ... ]--- 00270 ========= FAILED TIMEOUT generic.187 in 1200s Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-02-11USB: serial: option: fix Telit Cinterion FN990A nameFabio Porcedda
The correct name for FN990 is FN990A so use it in order to avoid confusion with FN990B. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-02-11USB: serial: option: add Telit Cinterion FN990B compositionsFabio Porcedda
Add the following Telit Cinterion FN990B40 compositions: 0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Reviewed-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2025-02-11Merge tag 'rtw-next-2025-02-10-v2' of https://github.com/pkshih/rtwJohannes Berg
Ping-Ke says: ==================== rtw-next patches for v6.15 Major changes are listed below: rtw88: * preparation to support RTL8814AU rtw89: * switch using wiphy_lock and wiphy_work * add BB context to manipulate two PHY as preparation of MLO * improve BT-coexistence mechanism to play A2DP smoothly * firmware file can contain regd table ==================== Link: https://lore.kernel.org/linux-wireless/b65fae15-79bf-40fa-8acc-63d87ae35e19@RTEXMBS04.realtek.com.tw/ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11mfd: syscon: Restore device_node_to_regmap() for non-syscon nodesRob Herring (Arm)
Commit ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a "syscon" compatible") broke drivers which call device_node_to_regmap() on nodes without a "syscon" compatible. Restore the prior behavior for device_node_to_regmap(). This also makes using device_node_to_regmap() incompatible with of_syscon_register_regmap() again, so add kerneldoc for device_node_to_regmap() and syscon_node_to_regmap() to make it clear how and when each one should be used. Fixes: ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a "syscon" compatible") Reported-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Nishanth Menon <nm@ti.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Dhruva Gole <d-gole@ti.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250124191644.2309790-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-11USB: serial: option: add MeiG Smart SLM828Chester A. Unal
MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The "Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03" interfaces respond to AT commands. Add these interfaces. The product ID the modem uses is shared across multiple modems. Therefore, add comments to describe which interface is used for which modem. T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev=05.04 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=4da7ec42 C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com> Link: https://lore.kernel.org/20250124-for-johan-meig-slm828-v2-1-6b4cd3f6344f@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-02-11ALSA: hda/tas2781: Update tas2781 hda SPI driverBaojun Xu
Because firmware issue of platform, found spi device is not stable, so add status check before firmware download, and remove some operations which is not must in current stage. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver") Link: https://patch.msgid.link/20250211083941.5574-1-baojun.xu@ti.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-11mtd: rawnand: qcom: fix broken config in qcom_param_page_type_execChristian Marangi
Fix broken config in qcom_param_page_type_exec caused by copy-paste error from commit 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK") In qcom_param_page_type_exec the value needs to be set to nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused the Qcom NANDC driver to malfunction on any device that makes use of it (IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error: [ 0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa [ 0.885909] nand: Micron NAND 256MiB 1,8V 8-bit [ 0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB [ 0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible [ 0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel [ 0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28 Restore original configuration fix the problem and makes the driver work again. Also restore the wrongly dropped cpu_to_le32 to correctly support BE systems. Cc: stable@vger.kernel.org Fixes: 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK") Tested-by: Robert Marko <robimarko@gmail.com> # IPQ8074 and IPQ6018 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-02-11Merge branch 'tcp-allow-to-reduce-max-rto'Paolo Abeni
Eric Dumazet says: ==================== tcp: allow to reduce max RTO This is a followup of a discussion started 6 months ago by Jason Xing. Some applications want to lower the time between each retransmit attempts. TCP_KEEPINTVL and TCP_KEEPCNT socket options don't work around the issue. This series adds: - a new TCP level socket option (TCP_RTO_MAX_MS) - a new sysctl (/proc/sys/net/ipv4/tcp_rto_max_ms) Admins and/or applications can now change the max rto value at their own risk. Link: https://lore.kernel.org/netdev/20240715033118.32322-1-kerneljasonxing@gmail.com/T/ ==================== Link: https://patch.msgid.link/20250207152830.2527578-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11tcp: add tcp_rto_max_ms sysctlEric Dumazet
Previous patch added a TCP_RTO_MAX_MS socket option to tune a TCP socket max RTO value. Many setups prefer to change a per netns sysctl. This patch adds /proc/sys/net/ipv4/tcp_rto_max_ms Its initial value is 120000 (120 seconds). Keep in mind that a decrease of tcp_rto_max_ms means shorter overall timeouts, unless tcp_retries2 sysctl is increased. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11tcp: add the ability to control max RTOEric Dumazet
Currently, TCP stack uses a constant (120 seconds) to limit the RTO value exponential growth. Some applications want to set a lower value. Add TCP_RTO_MAX_MS socket option to set a value (in ms) between 1 and 120 seconds. It is discouraged to change the socket rto max on a live socket, as it might lead to unexpected disconnects. Following patch is adding a netns sysctl to control the default value at socket creation time. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11tcp: use tcp_reset_xmit_timer()Eric Dumazet
In order to reduce TCP_RTO_MAX occurrences, replace: inet_csk_reset_xmit_timer(sk, what, when, TCP_RTO_MAX) With: tcp_reset_xmit_timer(sk, what, when, false); Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11tcp: add a @pace_delay parameter to tcp_reset_xmit_timer()Eric Dumazet
We want to factorize calls to inet_csk_reset_xmit_timer(), to ease TCP_RTO_MAX change. Current users want to add tcp_pacing_delay(sk) to the timeout. Remaining calls to inet_csk_reset_xmit_timer() do not add the pacing delay. Following patch will convert them, passing false for @pace_delay. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11tcp: remove tcp_reset_xmit_timer() @max_when argumentEric Dumazet
All callers use TCP_RTO_MAX, we can factorize this constant, becoming a variable soon. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11Merge branch 'mptcp-pm-misc-cleanups-part-2'Paolo Abeni
Matthieu Baerts says: ==================== mptcp: pm: misc cleanups, part 2 These cleanups lead the way to the unification of the path-manager interfaces, and allow future extensions. The following patches are not all linked to each others, but are all related to the path-managers. - Patch 1: drop unneeded parameter in a function helper. - Patch 2: clearer NL error message when an NL attribute is missing. - Patch 3: more precise NL messages by avoiding 'this or that is NOK'. - Patch 4: improve too vague or missing NL err messages. - Patch 5: use GENL_REQ_ATTR_CHECK to look for mandatory NL attributes. - Patch 6: avoid overriding the error message. - Patch 7: check all mandatory NL attributes with GENL_REQ_ATTR_CHECK. - Patch 8: use NL_SET_ERR_MSG_ATTR instead of GENL_SET_ERR_MSG - Patch 9: move doit callbacks used for both PM to pm.c. - Patch 10: drop another unneeded parameter in a function helper. - Patch 11: share the ID parsing code for the 'get_addr' callback. - Patch 12: share sending NL code for the 'get_addr' callback. - Patch 13: drop yet another unneeded parameter in a function helper. - Patch 14: pick the usual structure type for the remote address. - Patch 15: share the local addr parsing code for the 'set_flags' cb. The behaviour when there are no errors should then not be modified. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> ==================== v2: https://lore.kernel.org/r/20250117-net-next-mptcp-pm-misc-cleanup-2-v2-0-61d4fe0586e8@kernel.org v1: https://lore.kernel.org/r/20250116-net-next-mptcp-pm-misc-cleanup-2-v1-0-c0b43f18fe06@kernel.org Link: https://patch.msgid.link/20250207-net-next-mptcp-pm-misc-cleanup-2-v3-0-71753ed957de@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: add local parameter for set_flagsGeliang Tang
This patch updates the interfaces set_flags to reduce repetitive code, adds a new parameter 'local' for them. The local address is parsed in public helper mptcp_pm_nl_set_flags_doit(), then pass it to mptcp_pm_nl_set_flags() and mptcp_userspace_pm_set_flags(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: change rem type of set_flagsGeliang Tang
Generally, in the path manager interfaces, the local address is defined as an mptcp_pm_addr_entry type address, while the remote address is defined as an mptcp_addr_info type one: (struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote) But the set_flags() interface uses two mptcp_pm_addr_entry type parameters. This patch changes the second one to mptcp_addr_info type and use helper mptcp_pm_parse_addr() to parse it instead of using mptcp_pm_parse_entry(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop skb parameter of set_flagsGeliang Tang
The first parameter 'skb' in mptcp_pm_nl_set_flags() is only used to obtained the network namespace, which can also be obtained through the second parameters 'info' by using genl_info_net() helper. This patch drops these useless parameters 'skb' in all three set_flags() interfaces. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: reuse sending nlmsg code in get_addrGeliang Tang
The netlink messages are sent both in mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive. This is because the netlink PM and userspace PM use different locks to protect the address entry that needs to be sent via the netlink message. The former uses rcu read lock, and the latter uses msk->pm.lock. The current get_addr() flow looks like this: lock(); entry = get_entry(); send_nlmsg(entry); unlock(); After holding the lock, get the entry from the list, send the entry, and finally release the lock. This patch changes the process by getting the entry while holding the lock, then making a copy of the entry so that the lock can be released. Finally, the copy of the entry is sent without locking: lock(); entry = get_entry(); *copy = *entry; unlock(); send_nlmsg(copy); This way we can reuse the send_nlmsg() code in get_addr() interfaces between the netlink PM and userspace PM. They only need to implement their own get_addr() interfaces to hold the different locks, get the entry from the different lists, then release the locks. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: add id parameter for get_addrGeliang Tang
The address id is parsed both in mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive. So this patch adds a new parameter 'id' for all get_addr() interfaces. The address id is only parsed in mptcp_pm_nl_get_addr_doit(), then pass it to both mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop skb parameter of get_addrGeliang Tang
The first parameters 'skb' of get_addr() interfaces are now useless since mptcp_userspace_pm_get_sock() helper is used. This patch drops these useless parameters of them. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: make three pm wrappers staticGeliang Tang
Three netlink functions: mptcp_pm_nl_get_addr_doit() mptcp_pm_nl_get_addr_dumpit() mptcp_pm_nl_set_flags_doit() are generic, implemented for each PM, in-kernel PM and userspace PM. It's clearer to move them from pm_netlink.c to pm.c. And the linked three path manager wrappers mptcp_pm_get_addr() mptcp_pm_dump_addr() mptcp_pm_set_flags() can be changed as static functions, no need to export them in protocol.h. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: use NL_SET_ERR_MSG_ATTR when possibleMatthieu Baerts (NGI0)
Instead of only returning a text message with GENL_SET_ERR_MSG(), NL_SET_ERR_MSG_ATTR() can help the userspace developers by also reporting which attribute is faulty. When the error is specific to an attribute, NL_SET_ERR_MSG_ATTR() is now used. The error messages have not been modified in this commit. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: mark missing address attributesMatthieu Baerts (NGI0)
mptcp_pm_parse_entry() will check if the given attribute is defined. If not, it will return a generic error: "missing address info". It might then not be clear for the userspace developer which attribute is missing, especially when the command takes multiple addresses. By using GENL_REQ_ATTR_CHECK(), the userspace will get a hint about which attribute is missing, making thing clearer. Note that this is what was already done for most of the other MPTCP NL commands, this patch simply adds the missing ones. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: remove duplicated error messagesMatthieu Baerts (NGI0)
mptcp_pm_parse_entry() and mptcp_pm_parse_addr() will already set a error message in case of parsing issue. Then, no need to override this error message with another less precise one: "error parsing address". Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: userspace: use GENL_REQ_ATTR_CHECKGeliang Tang
A more general way to check if MPTCP_PM_ATTR_* exists in 'info' is to use GENL_REQ_ATTR_CHECK(info, MPTCP_PM_ATTR_*) instead of directly reading info->attrs[MPTCP_PM_ATTR_*] and then checking if it's NULL. So this patch uses GENL_REQ_ATTR_CHECK() for userspace PM in mptcp_pm_nl_announce_doit(), mptcp_pm_nl_remove_doit(), mptcp_pm_nl_subflow_create_doit(), mptcp_pm_nl_subflow_destroy_doit() and mptcp_userspace_pm_get_sock(). Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: improve error messagesMatthieu Baerts (NGI0)
Some error messages were: - too generic: "missing input", "invalid request" - not precise enough: "limit greater than maximum" but what's the max? - missing: subflow not found, or connect error. This can be easily improved by being more precise, or adding new error messages. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: more precise error messagesMatthieu Baerts (NGI0)
Some errors reported by the userspace PM were vague: "this or that is invalid". It is easier for the userspace to know which part is wrong, instead of having to guess that. While at it, in mptcp_userspace_pm_set_flags() move the parsing after the check linked to the local attribute. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: userspace: flags: clearer msg if no remote addrMatthieu Baerts (NGI0)
Since its introduction in commit 892f396c8e68 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs"), it was mandatory to specify the remote address, because of the 'if (rem->addr.family == AF_UNSPEC)' check done later one. In theory, this attribute can be optional, but it sounds better to be precise to avoid sending the MP_PRIO on the wrong subflow, e.g. if there are multiple subflows attached to the same local ID. This can be relaxed later on if there is a need to act on multiple subflows with one command. For the moment, the check to see if attr_rem is NULL can be removed, because mptcp_pm_parse_entry() will do this check as well, no need to do that differently here. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop info of userspace_pm_remove_id_zero_addressGeliang Tang
The only use of 'info' parameter of userspace_pm_remove_id_zero_address() is to set an error message into it. Plus, this helper will only fail when it cannot find any subflows with a local address ID 0. This patch drops this parameter and sets the error message where this function is called in mptcp_pm_nl_remove_doit(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11wifi: iwlwifi: Fix A-MSDU TSO preparationIlan Peer
The TSO preparation assumed that the skb head contained the headers while the rest of the data was in the fragments. Since this is not always true, e.g., it is possible that the data was linearised, modify the TSO preparation to start the data processing after the network headers. Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.75769a4769bf.Iaf79e8538093cdf8c446c292cc96164ad6498f61@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: Free pages allocated when failing to build A-MSDUIlan Peer
When failing to prepare the data needed for A-MSDU transmission, the memory allocated for the TSO management was not freed. Fix it. Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.bc27fad9b3d5.Ibf43dd18fb652b1a59061204e081f11c9fa34a3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: limit printed string from FW fileJohannes Berg
There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have. Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: use the right version of the rate APIEmmanuel Grumbach
The firmware uses the newer version of the API in recent devices. For older devices, we translate the rate to the new format. Don't parse the rate with old parsing macros. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.13d70cdcbb4e.Ic92193bce4013b70a823cfef250ee79c16cf7c17@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: don't try to talk to a dead firmwareEmmanuel Grumbach
This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command. Fixes: 268712dc3b34 ("wifi: iwlwifi: mvm: add a debugfs hook to clear the monitor data") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.8e1597b62c70.I12ea71dd9b805b095c9fc12a10c9f34a4e801b61@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspendEmmanuel Grumbach
This is not really a firmware error. We need to reload the firmware, but this doesn't mean that we should consider this as a firmware error. When the firmware was restarted upon resume, this wasn't felt by the driver. Now that we keep the firmware running during suspend even if we don't have wowlan, this started to pop-up. Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.a10463a40318.I14131781c3124b58e60e1f5e9d793a2bc88b464c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: clean up ROC on failureJohannes Berg
If the firmware fails to start the session protection, then we do call iwl_mvm_roc_finished() here, but that won't do anything at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set. Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path. If it started successfully before, it's already set, so that doesn't matter, and if it didn't start it needs to be set to clean up. Not doing so will lead to a WARN_ON() later on a fresh remain- on-channel, since the link is already active when activated as it was never deactivated. Fixes: 35c1bbd93c4e ("wifi: iwlwifi: mvm: remove IWL_MVM_STATUS_NEED_FLUSH_P2P") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.0fe36c291068.I67f5dac742170dd937f11e4d4f937f45f71b7cb4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: fw: avoid using an uninitialized variableMiri Korenblit
iwl_fwrt_read_err_table can return true also when it failed to read the memory. In this case, err_id argument is not initialized, but the callers are still using it. Simply initialize it to 0. If the error table was read successfully it'll be overridden. Fixes: 43e0b2ada519 ("wifi: iwlwifi: fw: add an error table status getter") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250209143303.37cdbba4eb56.I95fe9bd95303b8179f946766558a9f15f4fe254c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: fw: allocate chained SG tables for dumpJohannes Berg
The firmware dumps can be pretty big, and since we use single pages for each SG table entry, even the table itself may end up being an order-5 allocation. Build chained tables so that we need not allocate a higher-order table here. This could be improved and cleaned up, e.g. by using the SG pool code or simply kvmalloc(), but all of that would require also updating the devcoredump first since that frees it all, so we need to be more careful. SG pool might also run against the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant here. Also use _devcd_free_sgtable() for the error paths now, much simpler especially since it's in two places now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: remove debugfs dir for virtual monitorAlexander Wetzel
Don't call ieee80211_debugfs_recreate_netdev() for virtual monitor interface when deleting it. The virtual monitor interface shouldn't have debugfs entries and trying to update them will *create* them on deletion. And when the virtual monitor interface is created/destroyed multiple times we'll get warnings about debugfs name conflicts. Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250204164240.370153-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: Cleanup sta TXQs on flushAlexander Wetzel
Drop the sta TXQs on flush when the drivers is not supporting flush. ieee80211_set_disassoc() tries to clean up everything for the sta. But it ignored queued frames in the sta TX queues when the driver isn't supporting the flush driver ops. Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250204123129.9162-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: nl80211: reject cooked mode if it is set along with other flagsVitaliy Shevtsov
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 66f7ac50ed7c ("nl80211: Add monitor interface configuration flags") Cc: stable@vger.kernel.org Reported-by: syzbot+2e5c1e55b9e5c28a3da7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e5c1e55b9e5c28a3da7 Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://patch.msgid.link/20250131152657.5606-1-v.shevtsov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: implement dump region splitJohannes Berg
Due to hardware design constraints, a reset handshake may be necessary even when the firmware has already crashed, with the dump descriptions indicating which parts should be done before/after the handshake, if needed. Implement that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.9296e3113d42.Ifb32703fd06a644d08a86b7af1b990738e3c8134@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: add twt operation cmdShaul Triebitz
Add the firmware API. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.50a9f7bebe4c.I15ac1361fdab547dbf680a6fa6e88fdc5b177082@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: use correct IMR dump variableJohannes Berg
We shouldn't dump the reg_data here which dumps the last entry again, it should use the imr_reg_data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.3313b18667d1.Iaa9ab66b1d397912a573525e060d39ea01b29d19@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: support ROC version 6Shaul Triebitz
Version 6 added ROC with multi repetitions. We don't use it, but need to update the command length. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.956c33729d48.I609835c08f0003c084a13a1e1e505cb7bc8ecbc6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: clarify the meaning of IWL_INIT_PHYEmmanuel Grumbach
This is a bit that tells the firmware to wait for the PHY_CONFIGURATION_CMD before completing its init sequence. Clarify this in the comment. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.097510347ae2.Ica00b4b30163a21bf993fa968dd406ee4023fc9e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: properly set the names for SC devicesEmmanuel Grumbach
Sc devices can come with several CRFs. Use the CRF to determine the name of the device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.5bf5d931204e.I5eb435db1b8df46687c43ebae6488c0c4430d530@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: make no_160 more genericEmmanuel Grumbach
We'll have devices that are EHT capable but don't support 320 MHz and those devices look like the 320 MHz capable devices, but have distinct subsystem ID. We already had the same type of differentiation for HE devices that support 160 MHz or not. Enhance that mechanism and now the _IWL_DEV_INFO macro gets an indication whether the bandwidth should be limited for that specific device. The subsystem ID gives a binary answer about the bandwidth limitation and iwl_pci_find_dev_info() compares this to the list of _IWL_DEV_INFO entries. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.1ba406c538a5.I6e24123f60a764aedfeaaac8768c26e136c320cf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: be less aggressive with re-probeEmmanuel Grumbach
Re-probing if we had 2 firmware crash within 3 minutes is really too aggressive. Drastically reduce the threshold to 7 seconds. After 7 seconds, a new firmware crash will be considered "new" and not cause a PCI re-probe. This allows to pass tests that cause a firmware crash every 10 seconds and expect to see no impact on the traffic. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.38f912b047f4.I03f0c10ae9e7ecea639431f3e089b757cc8a4347@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 12:09:01 +0000