summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-25Documentation: devlink: add devlink documentation for the kvaser_pciefd driverJimmy Assarsson
List the version information reported by the kvaser_pciefd driver through devlink. Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Add devlink port supportJimmy Assarsson
Register each CAN channel of the device as an devlink physical port. This makes it easier to get device information for a given network interface (i.e. can2). Example output: $ devlink dev pci/0000:07:00.0 pci/0000:08:00.0 pci/0000:09:00.0 $ devlink port pci/0000:07:00.0/0: type eth netdev can0 flavour physical port 0 splittable false pci/0000:07:00.0/1: type eth netdev can1 flavour physical port 1 splittable false pci/0000:07:00.0/2: type eth netdev can2 flavour physical port 2 splittable false pci/0000:07:00.0/3: type eth netdev can3 flavour physical port 3 splittable false pci/0000:08:00.0/0: type eth netdev can4 flavour physical port 0 splittable false pci/0000:08:00.0/1: type eth netdev can5 flavour physical port 1 splittable false pci/0000:09:00.0/0: type eth netdev can6 flavour physical port 0 splittable false pci/0000:09:00.0/1: type eth netdev can7 flavour physical port 1 splittable false pci/0000:09:00.0/2: type eth netdev can8 flavour physical port 2 splittable false pci/0000:09:00.0/3: type eth netdev can9 flavour physical port 3 splittable false $ devlink port show can2 pci/0000:07:00.0/2: type eth netdev can2 flavour physical port 2 splittable false $ devlink dev info pci/0000:07:00.0: driver kvaser_pciefd versions: running: fw 1.3.75 pci/0000:08:00.0: driver kvaser_pciefd versions: running: fw 2.4.29 pci/0000:09:00.0: driver kvaser_pciefd versions: running: fw 1.3.72 $ sudo ethtool -i can2 driver: kvaser_pciefd version: 6.8.0-40-generic firmware-version: 1.3.75 expansion-rom-version: bus-info: 0000:07:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Expose device firmware version via devlink info_get()Jimmy Assarsson
Expose device firmware version via devlink info_get(). Example output: $ devlink dev pci/0000:07:00.0 pci/0000:08:00.0 pci/0000:09:00.0 $ devlink dev info pci/0000:07:00.0: driver kvaser_pciefd versions: running: fw 1.3.75 pci/0000:08:00.0: driver kvaser_pciefd versions: running: fw 2.4.29 pci/0000:09:00.0: driver kvaser_pciefd versions: running: fw 1.3.72 Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Add devlink supportJimmy Assarsson
Add devlink support at device level. Example output: $ devlink dev pci/0000:07:00.0 pci/0000:08:00.0 pci/0000:09:00.0 $ devlink dev info pci/0000:07:00.0: driver kvaser_pciefd pci/0000:08:00.0: driver kvaser_pciefd pci/0000:09:00.0: driver kvaser_pciefd Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-8-extja@kvaser.com [mkl: kvaser_pciefd_remove(): fix use-after-free] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Split driver into C-file and header-file.Jimmy Assarsson
Split driver into C-file and header-file, to simplify future patches. Move common definitions and declarations to a header file. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Store device channel indexJimmy Assarsson
Store device channel index in netdev.dev_port. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Store the different firmware version components in a structJimmy Assarsson
Store firmware version in kvaser_pciefd_fw_version struct, specifying the different components of the version number. And drop debug prinout of firmware version, since later patches will expose it via the devlink interface. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Add intermediate variable for device struct in probe()Jimmy Assarsson
Add intermediate variable, for readability and to simplify future patches. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Add support for ethtool set_phys_id()Jimmy Assarsson
Add support for ethtool set_phys_id(), to physically locate devices by flashing a LED on the device. Reviewed-by: Axel Forsman <axfo@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: kvaser_pciefd: Add support to control CAN LEDs on deviceJimmy Assarsson
Add support to turn on/off CAN LEDs on device. Turn off all CAN LEDs in probe, since they are default on after a reset or power on. Reviewed-by: Axel Forsman <axfo@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123230.8-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25docs: Fix kernel-doc error in CAN driverLuis Felipe Hernandez
Fix kernel-doc formatting issue causing unexpected indentation error in ctucanfd driver documentation build. Convert main return values to bullet list format while preserving numbered sub-list in order to correct indentation error and visual structure in rendered html. Signed-off-by: Luis Felipe Hernandez <luis.hernandez093@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Pavel Pisa <pisa@fel.cvut.cz> Link: https://patch.msgid.link/20250722035352.21807-1-luis.hernandez093@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-25can: tscan1: CAN_TSCAN1 can depend on PC104Randy Dunlap
Add a dependency on PC104 to limit (restrict) this driver kconfig prompt to kernel configs that have PC104 set. Add COMPILE_TEST as a possibility for more complete build coverage. I tested this build config on x86_64 5 times without problems. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250721002823.3548945-1-rdunlap@infradead.org [mkl: fix conflict, remove Fixes: tag] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-15Merge patch series "can: Kconfig: add missing COMPILE_TEST"Marc Kleine-Budde
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: The ti_hecc and tscan1 CAN drivers can not be built on an x86_64 platform. Add the COMPILE_TEST dependency to allow build testing. Doing that, a so far unnoticed W=0 warning showed up in ti_hecc. Fix this warning. To prevent any potential noise in some future git bisect, the warning is fixed before introducing COMPILE_TEST. Note that the mscan and mpc5xxx drivers have the same issue but those two use some helper functions, such as in_8() and out_8(), which are only available on the powerpc platform. Those two drivers would require some deeper code refactor to be built on x86_64 and are thus left out of scope. Link: https://patch.msgid.link/20250715-can-compile-test-v2-0-f7fd566db86f@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-15can: tscan1: Kconfig: add COMPILE_TESTVincent Mailhol
tscan1 depends on ISA. It also has a hidden dependency on HAS_IOPORT as reported by the kernel test bot [1]. That dependency is implied by ISA which explains why this was not an issue so far. Add both COMPILE_TEST and HAS_IOPORT to the dependency list so that this driver can also be built on other platforms. [1] https://lore.kernel.org/linux-can/202507141417.qAMrchyV-lkp@intel.com/ Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250715-can-compile-test-v2-3-f7fd566db86f@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-15can: ti_hecc: Kconfig: add COMPILE_TESTVincent Mailhol
ti_hecc depends on ARM. Add COMPILE_TEST to the dependency list so that this driver can also be built on other platforms. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250715-can-compile-test-v2-2-f7fd566db86f@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-15can: ti_hecc: fix -Woverflow compiler warningVincent Mailhol
Fix below default (W=0) warning: drivers/net/can/ti_hecc.c: In function 'ti_hecc_start': drivers/net/can/ti_hecc.c:386:20: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709551599' to '4294967279' [-Woverflow] 386 | mbx_mask = ~BIT(HECC_RX_LAST_MBOX); | ^ Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250715-can-compile-test-v2-1-f7fd566db86f@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-15can: janz-ican3: use sysfs_emit() in fwinfo_show()Khaled Elnaggar
As recommended in Documentation/filesystems/sysfs.rst, show() callbacks should use sysfs_emit() or sysfs_emit_at() to format values returned to userspace. Replace scnprintf() with sysfs_emit() in fwinfo_show(). Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com> Link: https://patch.msgid.link/20250712133609.331904-1-khaledelnaggarlinux@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-14Merge branch 'tcp-receiver-changes'Jakub Kicinski
Eric Dumazet says: ==================== tcp: receiver changes Before accepting an incoming packet: - Make sure to not accept a packet beyond advertized RWIN. If not, increment a new SNMP counter (LINUX_MIB_BEYOND_WINDOW) - ooo packets should update rcv_mss and tp->scaling_ratio. - Make sure to not accept packet beyond sk_rcvbuf limit. This series includes three associated packetdrill tests. ==================== Link: https://patch.msgid.link/20250711114006.480026-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14selftests/net: packetdrill: add tcp_rcv_toobig.pktEric Dumazet
Check that TCP receiver behavior after "tcp: stronger sk_rcvbuf checks" Too fat packet is dropped unless receive queue is empty. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-9-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14tcp: stronger sk_rcvbuf checksEric Dumazet
Currently, TCP stack accepts incoming packet if sizes of receive queues are below sk->sk_rcvbuf limit. This can cause memory overshoot if the packet is big, like an 1/2 MB BIG TCP one. Refine the check to take into account the incoming skb truesize. Note that we still accept the packet if the receive queue is empty, to not completely freeze TCP flows in pathological conditions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14tcp: add const to tcp_try_rmem_schedule() and sk_rmem_schedule() skbEric Dumazet
These functions to not modify the skb, add a const qualifier. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14selftests/net: packetdrill: add tcp_ooo_rcv_mss.pktEric Dumazet
We make sure tcpi_rcv_mss and tp->scaling_ratio are correctly updated if no in-order packet has been received yet. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14tcp: call tcp_measure_rcv_mss() for ooo packetsEric Dumazet
tcp_measure_rcv_mss() is used to update icsk->icsk_ack.rcv_mss (tcpi_rcv_mss in tcp_info) and tp->scaling_ratio. Calling it from tcp_data_queue_ofo() makes sure these fields are updated, and permits a better tuning of sk->sk_rcvbuf, in the case a new flow receives many ooo packets. Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14selftests/net: packetdrill: add tcp_rcv_big_endseq.pktEric Dumazet
This test checks TCP behavior when receiving a packet beyond the window. It checks the new TcpExtBeyondWindow SNMP counter. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14tcp: add LINUX_MIB_BEYOND_WINDOWEric Dumazet
Add a new SNMP MIB : LINUX_MIB_BEYOND_WINDOW Incremented when an incoming packet is received beyond the receiver window. nstat -az | grep TcpExtBeyondWindow Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14tcp: do not accept packets beyond windowEric Dumazet
Currently, TCP accepts incoming packets which might go beyond the offered RWIN. Add to tcp_sequence() the validation of packet end sequence. Add the corresponding check in the fast path. We relax this new constraint if the receive queue is empty, to not freeze flows from buggy peers. Add a new drop reason : SKB_DROP_REASON_TCP_INVALID_END_SEQUENCE. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: wangxun: fix LIBWX dependencies againArnd Bergmann
Two more drivers got added that use LIBWX and cause a build warning WARNING: unmet direct dependencies detected for LIBWX Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - NGBEVF [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI_MSI [=y] Selected by [m]: - NGBE [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=m] ld: drivers/net/ethernet/wangxun/libwx/wx_lib.o: in function `wx_clean_tx_irq': wx_lib.c:(.text+0x5a68): undefined reference to `ptp_schedule_worker' ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset': wx_ethtool.c:(.text+0x880): undefined reference to `phylink_ethtool_nway_reset' Add the same dependency on PTP_1588_CLOCK_OPTIONAL to the two driver using this library module, following the pattern from commit 8fa19c2c69fb ("net: wangxun: fix LIBWX dependencies"). Fixes: 377d180bd71c ("net: wangxun: add txgbevf build") Fixes: a0008a3658a3 ("net: wangxun: add ngbevf build") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://patch.msgid.link/20250711082339.1372821-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14Add support to set NAPI threaded for individual NAPISamiullah Khawaja
A net device has a threaded sysctl that can be used to enable threaded NAPI polling on all of the NAPI contexts under that device. Allow enabling threaded NAPI polling at individual NAPI level using netlink. Extend the netlink operation `napi-set` and allow setting the threaded attribute of a NAPI. This will enable the threaded polling on a NAPI context. Add a test in `nl_netdev.py` that verifies various cases of threaded NAPI being set at NAPI and at device level. Tested ./tools/testing/selftests/net/nl_netdev.py TAP version 13 1..7 ok 1 nl_netdev.empty_check ok 2 nl_netdev.lo_check ok 3 nl_netdev.page_pool_check ok 4 nl_netdev.napi_list_check ok 5 nl_netdev.dev_set_threaded ok 6 nl_netdev.napi_set_threaded ok 7 nl_netdev.nsim_rxq_reset_down # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: phy: Don't register LEDs for genphySean Anderson
If a PHY has no driver, the genphy driver is probed/removed directly in phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the LEDs will be (un)registered when probing/removing the genphy driver. This could occur if the leds are for a non-generic driver that isn't loaded for whatever reason. Synchronously removing the PHY device in phy_detach leads to the following deadlock: rtnl_lock() ndo_close() ... phy_detach() phy_remove() phy_leds_unregister() led_classdev_unregister() led_trigger_set() netdev_trigger_deactivate() unregister_netdevice_notifier() rtnl_lock() There is a corresponding deadlock on the open/register side of things (and that one is reported by lockdep), but it requires a race while this one is deterministic. Regular drivers do not have this problem since they are probed asynchronously (without RTNL held). Generic PHYs do not support LEDs anyway, so don't bother registering them. [JakubL this is a net-next version of commit f0f2b992d818 ("net: phy: Don't register LEDs for genphy"), which uses APIs removed in -next.] Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250710201454.1280277-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14netdevsim: implement peer queue flow controlBreno Leitao
Add flow control mechanism between paired netdevsim devices to stop the TX queue during high traffic scenarios. When a receive queue becomes congested (approaching NSIM_RING_SIZE limit), the corresponding transmit queue on the peer device is stopped using netif_subqueue_try_stop(). Once the receive queue has sufficient capacity again, the peer's transmit queue is resumed with netif_tx_wake_queue(). Key changes: * Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full * Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains * Implement queue mapping validation to ensure TX/RX queue count match * Wake all queues during device unlinking to prevent stuck queues * Use RCU protection when accessing peer device references * wake the queues when changing the queue numbers * Remove IFF_NO_QUEUE given it will enqueue packets now The flow control only activates when devices have matching TX/RX queue counts to ensure proper queue mapping. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14selftests: net: add test for variable PMTU in broadcast routesOscar Maes
Added a test for variable PMTU in broadcast routes. This test uses iputils' ping and attempts to send a ping between two peers, which should result in a regular echo reply. This test will fail when the receiving peer does not receive the echo request due to a lack of packet fragmentation. Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Link: https://patch.msgid.link/20250710142714.12986-2-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: ipv4: fix incorrect MTU in broadcast routesOscar Maes
Currently, __mkroute_output overrules the MTU value configured for broadcast routes. This buggy behaviour can be reproduced with: ip link set dev eth1 mtu 9000 ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500 The maximum packet size should be 1500, but it is actually 8000: ping -b 192.168.0.255 -s 8000 Fix __mkroute_output to allow MTU values to be configured for for broadcast routes (to support a mixed-MTU local-area-network). Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Link: https://patch.msgid.link/20250710142714.12986-1-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14Merge branch 'mlx5-next' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Tariq Toukan says: ==================== mlx5-next updates 2025-07-14 * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: IFC updates for disabled host PF net/mlx5: Expose disciplined_fr_counter through HCA capabilities in mlx5_ifc RDMA/mlx5: Fix UMR modifying of mkey page size net/mlx5: Expose HCA capability bits for mkey max page size ==================== Link: https://patch.msgid.link/1752481357-34780-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14Merge tag 'linux-can-next-for-6.17-20250711' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2025-07-11 The first patch is by Geert Uytterhoeven and converts the rcar_can driver to DEFINE_SIMPLE_DEV_PM_OPS. The last patch is by Biju Das and removes unused macros from the rcar_canfd driver. * tag 'linux-can-next-for-6.17-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: rcar_canfd: Drop unused macros can: rcar_can: Convert to DEFINE_SIMPLE_DEV_PM_OPS() ==================== Link: https://patch.msgid.link/20250711101706.2822687-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net/x25: Remove unused x25_terminate_link()Dr. David Alan Gilbert
x25_terminate_link() has been unused since the last use was removed in 2020 by: commit 7eed751b3b2a ("net/x25: handle additional netdev events") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://patch.msgid.link/20250712205759.278777-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14selftests: drv-net: add rss_api to the MakefileJakub Kicinski
I missed adding rss_api.py to the Makefile. The NIPA Makefile checking script was scanning for shell scripts only, so it didn't flag it either. Fixes: 4d13c6c449af ("selftests: drv-net: test RSS Netlink notifications") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250712012005.4010263-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: thunderx: Fix format-truncation warning in bgx_acpi_match_id()Alok Tiwari
The buffer bgx_sel used in snprintf() was too small to safely hold the formatted string "BGX%d" for all valid bgx_id values. This caused a -Wformat-truncation warning with `Werror` enabled during build. Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in snprintf() to ensure safety and suppress the warning. Build warning: CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function ‘bgx_acpi_match_id’: drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Werror=format-truncation=] snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); ^~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note: directive argument in the range [0, 255] snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); ^~~~~~~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note: ‘snprintf’ output between 5 and 7 bytes into a destination of size 5 snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); compiler warning due to insufficient snprintf buffer size. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14Merge branch 'net-fec-add-some-optimizations'Jakub Kicinski
Wei Fang says: ==================== net: fec: add some optimizations Add some optimizations to the fec driver, see each patch for details. v1: https://lore.kernel.org/20250710090902.1171180-1-wei.fang@nxp.com ==================== Link: https://patch.msgid.link/20250711091639.1374411-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: fec: add fec_set_hw_mac_addr() helper functionWei Fang
In the current driver, the MAC address is set in both fec_restart() and fec_set_mac_address(), so a generic helper function fec_set_hw_mac_addr() is added to set the hardware MAC address to make the code more compact. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250711091639.1374411-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: fec: add more macros for bits of FEC_ECRWei Fang
There are also some RCR bits that are not defined but are used by the driver, so add macro definitions for these bits to improve readability and maintainability. In addition, although FEC_RCR_HALFDPX has been defined, it is not used in the driver. According to the description of FEC_RCR[1] in RM, it is used to disable receive on transmit. Therefore, it is more appropriate to redefine FEC_RCR[1] as FEC_RCR_DRT. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250711091639.1374411-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: fec: use phy_interface_mode_is_rgmii() to check RGMII modeWei Fang
Use the generic helper function phy_interface_mode_is_rgmii() to check RGMII mode. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250711091639.1374411-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14dev: Pass netdevice_tracker to dev_get_by_flags_rcu().Kuniyuki Iwashima
This is a follow-up for commit eb1ac9ff6c4a5 ("ipv6: anycast: Don't hold RTNL for IPV6_JOIN_ANYCAST."). We should not add a new device lookup API without netdevice_tracker. Let's pass netdevice_tracker to dev_get_by_flags_rcu() and rename it with netdev_ prefix to match other newer APIs. Note that we always use GFP_ATOMIC for netdev_hold() as it's expected to be called under RCU. Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20250708184053.102109f6@kernel.org/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250711051120.2866855-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-14net: phy: micrel: Add ksz9131_resume()Biju Das
The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state, PHY loses the power and on wakeup the rgmii delays are not reconfigured causing it to fail. Replace the callback kszphy_resume()->ksz9131_resume() for reconfiguring the rgmii_delay when it exits from PM suspend state. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250711054029.48536-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-13tools: ynl: default to --process-unknown in installed modeJakub Kicinski
We default to raising an exception when unknown attrs are found to make sure those are noticed during development. When YNL CLI is "installed" and used by sysadmins erroring out is not going to be helpful. It's far more likely the user space is older than the kernel in that case, than that some attr is misdefined or missing. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13net: dsa: mt7530: Constify struct regmap_configChristophe JAILLET
'struct regmap_config' are not modified in these drivers. They be statically defined instead of allocated and populated at run-time. The main benefits are: - it saves some memory at runtime - the structures can be declared as 'const', which is always better for structures that hold some function pointers - the code is less verbose Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13tools: ynl: process unknown for enum valuesDonald Hunter
Extend the process_unknown handing to enum values and flags. Tested by removing entries from rt-link.yaml and rt-neigh.yaml: ./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink \ --process-unknown --output-json | jq '.[0] | ."ifi-flags"' [ "up", "Unknown(6)", "loopback", "Unknown(16)" ] ./tools/net/ynl/pyynl/cli.py --family rt-neigh --dump getneigh \ --process-unknown --output-json | jq '.[] | ."ndm-type"' "unicast" "Unknown(5)" "Unknown(5)" "unicast" "Unknown(5)" "unicast" "broadcast" Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13net/mlx5: IFC updates for disabled host PFDaniel Jurgens
The port 2 host PF can be disabled, this bit reflects that setting. Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1752064867-16874-3-git-send-email-tariqt@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-13net/mlx5: Expose disciplined_fr_counter through HCA capabilities in mlx5_ifcCarolina Jubran
Introduce the `disciplined_fr_counter` capability bit to indicate that the device’s free-running cycle counter is disciplined to real-time. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1752064867-16874-2-git-send-email-tariqt@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-13RDMA/mlx5: Fix UMR modifying of mkey page sizeEdward Srouji
When changing the page size on an mkey, the driver needs to set the appropriate bits in the mkey mask to indicate which fields are being modified. The 6th bit of a page size in mlx5 driver is considered an extension, and this bit has a dedicated capability and mask bits. Previously, the driver was not setting this mask in the mkey mask when performing page size changes, regardless of its hardware support, potentially leading to an incorrect page size updates. This fixes the issue by setting the relevant bit in the mkey mask when performing page size changes on an mkey and the 6th bit of this field is supported by the hardware. Fixes: cef7dde8836a ("net/mlx5: Expand mkey page size to support 6 bits") Signed-off-by: Edward Srouji <edwards@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9f43a9c73bf2db6085a99dc836f7137e76579f09.1751979184.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-13net/mlx5: Expose HCA capability bits for mkey max page sizeMichael Guralnik
Expose the HCA capability for maximal page size that can be configured for an mkey. Used for enforcing capabilities when working with highly contiguous memory and using large page sizes. Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3e4d3fda37934430f65f72601519e22bf396fd05.1751979184.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 08:45:40 +0000