| Age | Commit message (Collapse) | Author |
|---|
|
show_cons_active() uses the console_lock to gather information
on registered consoles. Since the console_lock is being used for
multiple reasons, explicitly document these reasons. This will
be useful when the console_lock is split into fine-grained
locking.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-10-john.ogness@linutronix.de
|
|
kgdboc_earlycon_init() uses the console_lock to ensure that no consoles
are unregistered until the kgdboc_earlycon is setup. This is necessary
because the trapping of the exit() callback assumes that the exit()
callback is not called before the trap is setup.
Explicitly document this non-typical console_lock usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-9-john.ogness@linutronix.de
|
|
The initial intention of the UML kmsg_dumper is to dump the kernel
buffers to stdout if there is no console available to perform the
regular crash output.
However, if ttynull was registered as a console, no crash output was
seen. Commit e23fe90dec28 ("um: kmsg_dumper: always dump when not tty
console") tried to fix this by performing the kmsg_dump unless the
stdio console was behind /dev/console or enabled. But this allowed
kmsg dumping to occur even if other non-stdio consoles will output
the crash output. Also, a console being the driver behind
/dev/console has nothing to do with a crash scenario.
Restore the initial intention by dumping the kernel buffers to stdout
only if a non-ttynull console is registered and enabled. Also add
detailed comments so that it is clear why these rules are applied.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-8-john.ogness@linutronix.de
|
|
It used to be that all consoles were synchronized with respect to
which message they were printing. After commit a699449bb13b ("printk:
refactor and rework printing logic"), all consoles have their own
@seq for tracking which message they are on. That commit also changed
how the initial sequence number was chosen. Instead of choosing the
next non-printed message, it chose the sequence number of the next
message that will be added to the ringbuffer.
That change created a possibility that a non-boot console taking over
for a boot console might skip messages if the boot console was behind
and did not have a chance to catch up before being unregistered.
Since it is not known which boot console is the same device, flush
all consoles and, if necessary, start with the message of the enabled
boot console that is the furthest behind. If no boot consoles are
enabled, begin with the next message that will be added to the
ringbuffer.
Also, since boot consoles are meant to be used at boot time, handle
them the same as CON_PRINTBUFFER to ensure that no initial messages
are skipped.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-7-john.ogness@linutronix.de
|
|
The code to initialize @seq for a new console needs to consider
more factors when choosing an initial value. Move the code into
a helper function console_init_seq() "as is" so this code can
be expanded without causing register_console() to become too
long. A later commit will implement the additional code.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-6-john.ogness@linutronix.de
|
|
The @bootcon_enabled and @realcon_enabled local variables actually
represent if such console types are registered. In general there
has been a confusion about enabled vs. registered. Incorrectly
naming such variables promotes such confusion.
Rename the variables to _registered.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-5-john.ogness@linutronix.de
|
|
Provide an NMI-safe SRCU protected variant to walk the console list.
Note that all console fields are now set before adding the console
to the list to avoid the console becoming visible by SCRU readers
before being fully initialized.
This is a preparatory change for a new console infrastructure which
operates independent of the console BKL.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-4-john.ogness@linutronix.de
|
|
Replace the open coded single linked list with a hlist so a conversion
to SRCU protected list walks can reuse the existing primitives.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-3-john.ogness@linutronix.de
|
|
Unprotected list walks are not necessarily safe.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-2-john.ogness@linutronix.de
|
|
__hw_perf_event_init() already calls armpmu->map_event() callback, and also
returns its error code including -ENOENT, along with a debug callout. Hence
an additional armpmu->map_event() check for -ENOENT is redundant.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20221202015611.338499-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A proposition of implementation of committable items has been rejected
due to the gpio-sim module being the only user and configfs not getting
much development in general. In that case, let's remove the notion
of committable items from docs and headers.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
kmemleak reported memory leaks in configfs_create_dir():
unreferenced object 0xffff888009f6af00 (size 192):
comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
backtrace:
kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
new_fragment (./include/linux/slab.h:600 fs/configfs/dir.c:163)
configfs_register_subsystem (fs/configfs/dir.c:1857)
basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
unreferenced object 0xffff888003ba7180 (size 96):
comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s)
backtrace:
kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273)
configfs_new_dirent (./include/linux/slab.h:723 fs/configfs/dir.c:194)
configfs_make_dirent (fs/configfs/dir.c:248)
configfs_create_dir (fs/configfs/dir.c:296)
configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852)
configfs_register_subsystem (fs/configfs/dir.c:1881)
basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
This is because the refcount is not correct in configfs_make_dirent().
For normal stage, the refcount is changing as:
configfs_register_subsystem()
configfs_create_dir()
configfs_make_dirent()
configfs_new_dirent() # set s_count = 1
dentry->d_fsdata = configfs_get(sd); # s_count = 2
...
configfs_unregister_subsystem()
configfs_remove_dir()
remove_dir()
configfs_remove_dirent() # s_count = 1
dput() ...
*dentry_unlink_inode()*
configfs_d_iput() # s_count = 0, release
However, if we failed in configfs_create():
configfs_register_subsystem()
configfs_create_dir()
configfs_make_dirent() # s_count = 2
...
configfs_create() # fail
->out_remove:
configfs_remove_dirent(dentry)
configfs_put(sd) # s_count = 1
return PTR_ERR(inode);
There is no inode in the error path, so the configfs_d_iput() is lost
and makes sd and fragment memory leaked.
To fix this, when we failed in configfs_create(), manually call
configfs_put(sd) to keep the refcount correct.
Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The type should be struct posix_acl * instead of void *.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-30 (e1000e, igb)
This series contains updates to e1000e and igb drivers.
Akihiko Odaki fixes calculation for checking whether space for next
frame exists for e1000e and properly sets MSI-X vector to fix failing
ethtool interrupt test for igb.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Allocate MSI-X vector when testing
e1000e: Fix TX dispatch condition
====================
Link: https://lore.kernel.org/r/20221130194228.3257787-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These old unused definitions were originally left around to prevent the
same mode numbers from being reused. However, we've now decided to
reuse the mode numbers anyway. So let's completely remove these old
unused definitions to avoid confusion. There is no reason for any code
to be using these constants in any way; and indeed, Debian Code Search
shows no uses of them (other than in copies or translations of the
header). So this should be perfectly safe.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221202035529.55992-1-ebiggers@kernel.org
|
|
Fix to return a negative error code from create_elf_fdpic_tables()
instead of 0.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669945261-30271-1-git-send-email-wangyufen@huawei.com
|
|
Make the description of @gendisk to @disk in blkcg_schedule_throttle()
to clear the below warnings:
block/blk-cgroup.c:1850: warning: Function parameter or member 'disk' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1850: warning: Excess function parameter 'gendisk' description in 'blkcg_schedule_throttle'
Fixes: de185b56e8a6 ("blk-cgroup: pass a gendisk to blkcg_schedule_throttle")
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3338
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221202011713.14834-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'struct cxl_nvdimm_bridge' object advertises platform CXL PMEM
resources. It coordinates with libnvdimm to attach nvdimm devices and
regions for each corresponding CXL object. That coordination is
complicated, i.e. difficult to reason about, and it turns out redundant.
It is already the case that the CXL core knows how to tear down a
cxl_region when a cxl_memdev goes through ->remove(), so that pathway
can be extended to directly cleanup cxl_nvdimm and cxl_pmem_region
objects.
Towards the goal of ripping out the cxl_nvdimm_bridge state machine,
arrange for cxl_acpi to optionally pre-load the cxl_pmem driver so that
the nvdimm bridge is active synchronously with
devm_cxl_add_nvdimm_bridge(), and remove all the bind attributes for the
cxl_nvdimm* objects since the cxl root device and cxl_memdev bind
attributes are sufficient.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993040668.1882361.7450361097265836752.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This commit adds lockdep checks for illegal use of synchronize_srcu()
within same-type SRCU read-side critical sections and within normal
RCU read-side critical sections. It also makes synchronize_srcu()
be a no-op during early boot.
These changes bring Tiny synchronize_srcu() into line with both Tree
synchronize_srcu() and Tiny synchronize_rcu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-12-01:
amdgpu:
- VCN fix for vangogh
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201202015.5931-1-alexander.deucher@amd.com
|
|
Recent changes to the DMA code has resulting in the IMX driver failing
I2C transfers when the buffer has been vmalloc. Only perform DMA
transfers if the message has the I2C_M_DMA_SAFE flag set, indicating
the client is providing a buffer which is DMA safe.
This is a minimal fix for stable. The I2C core provides helpers to
allocate a bounce buffer. For a fuller fix the master should make use
of these helpers.
Fixes: 4544b9f25e70 ("dma-mapping: Add vmap checks to dma_map_single()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix to return a negative error code from the gi2c->err instead of
0.
Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).
This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.
This restores the mentioned display devices to their working state again.
Fixes: 58b924241d0a ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In zoned mode, zones with write pointers can have conditions "read-only"
or "offline". In read-only condition, zones can not be written. In
offline condition, the zones can be neither written nor read. These
conditions are intended for zones with media failures, then it is
difficult to set those conditions to zones on real devices.
To test handling of zones in the conditions, add a feature to null_blk
to set up zones in read-only or offline condition. Add new configuration
attributes "zone_readonly" and "zone_offline". Write a sector to the
attribute files to specify the target zone to set the zone conditions.
For example, following command lines do it:
echo 0 > nullb1/zone_readonly
echo 524288 > nullb1/zone_offline
When the specified zones are already in read-only or offline condition,
normal empty condition is restored to the zones. These condition changes
can be done only after the null_blk device get powered, since status
area of each zone is not yet allocated before power-on.
Also improve zone condition checks to inhibit all commands for zones in
offline conditions. In same manner, inhibit write and zone management
commands for zones in read-only condition.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix dram info readout (Radhakrishna Sripada)
- Remove non-existent pipes from bigjoiner pipe mask (Ville Syrjälä)
- Fix negative value passed as remaining time (Janusz Krzysztofik)
- Never return 0 if not all requests retired (Janusz Krzysztofik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y4hp+a3TJ13t2ZA1@tursulin-desk
|
|
The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled. But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.
As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments. But error injection should
be avoided. Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".
This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.
Cc: stable@vger.kernel.org
Fixes: 540adea3809f6 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add provider name in order to associate cxl test dimm from cxl_test to the
cxl pmem device when going through sysfs for security testing.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618174.2734609.15600031015423828810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The mock cxl mem devs needs a way to go into "locked" status to simulate
when the platform is rebooted. Add a sysfs mechanism so the device security
state is set to "locked" and the frozen state bits are cleared.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617602.2734609.7042497620931694717.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add an id group attribute for CXL based nvdimm object. The addition allows
ndctl to display the "unique id" for the nvdimm. The serial number for the
CXL memory device will be used for this id.
[
{
"dev":"nmem10",
"id":"0x4",
"security":"disabled"
},
]
The id attribute is needed by the ndctl security key management to setup a
keyblob with a unique file name tied to the mem device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617029.2734609.8251308562882142281.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The original nvdimm_security_ops ->disable() only supports user passphrase
for security disable. The CXL spec introduced the disabling of master
passphrase. Add a ->disable_master() callback to support this new operation
and leaving the old ->disable() mechanism alone. A "disable_master" command
is added for the sysfs attribute in order to allow command to be issued
from userspace. ndctl will need enabling in order to utilize this new
operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983616454.2734609.14204031148234398086.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate a CXL mem device support the "passphrase secure
erase" operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983615879.2734609.5177049043677443736.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->erase()
callback. Translate the operation to send "Passphrase Secure Erase"
security command for CXL memory device.
When the mem device is secure erased, cpu_cache_invalidate_memregion() is
called in order to invalidate all CPU caches before attempting to access
the mem device again.
See CXL 3.0 spec section 8.2.9.8.6.6 for reference.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983615293.2734609.10358657600295932156.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate a CXL mem device support the "Unlock" operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983614730.2734609.2280484207184754073.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->unlock()
callback. Translate the operation to send "Unlock" security command for CXL
mem device.
When the mem device is unlocked, cpu_cache_invalidate_memregion() is called
in order to invalidate all CPU caches before attempting to access the mem
device.
See CXL rev3.0 spec section 8.2.9.8.6.4 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983614167.2734609.15124543712487741176.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate a CXL mem device support the "Freeze Security State"
operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983613604.2734609.1960672960407811362.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->freeze()
callback. Translate the operation to send "Freeze Security State" security
command for CXL memory device.
See CXL rev3.0 spec section 8.2.9.8.6.5 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983613019.2734609.10645754779802492122.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate a CXL mem device support the "Disable Passphrase"
operation. The operation supports disabling of either a user or a master
passphrase. The emulation will provide support for both user and master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983612447.2734609.2767804273351656413.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->disable()
callback. Translate the operation to send "Disable Passphrase" security
command for CXL memory device. The operation supports disabling a
passphrase for the CXL persistent memory device. In the original
implementation of nvdimm_security_ops, this operation only supports
disabling of the user passphrase. This is due to the NFIT version of
disable passphrase only supported disabling of user passphrase. The CXL
spec allows disabling of the master passphrase as well which
nvidmm_security_ops does not support yet. In this commit, the callback
function will only support user passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.3 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611878.2734609.10602135274526390127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate a CXL mem device supporting the "Set Passphrase"
operation. The operation supports setting of either a user or a master
passphrase.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611314.2734609.12996309794483934484.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->change_key()
callback. Translate the operation to send "Set Passphrase" security command
for CXL memory device. The operation supports setting a passphrase for the
CXL persistent memory device. It also supports the changing of the
currently set passphrase. The operation allows manipulation of a user
passphrase or a master passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.2 for reference.
However, the spec leaves a gap WRT master passphrase usages. The spec does
not define any ways to retrieve the status of if the support of master
passphrase is available for the device, nor does the commands that utilize
master passphrase will return a specific error that indicates master
passphrase is not supported. If using a device does not support master
passphrase and a command is issued with a master passphrase, the error
message returned by the device will be ambiguous.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610751.2734609.4445075071552032091.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add the emulation support for handling "Get Security State" opcode for a
CXL memory device for the cxl_test. The function will copy back device
security state bitmask to the output payload.
The security state data is added as platform_data for the mock mem device.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610177.2734609.4953959949148428755.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The amdgpu kernel module has supported RDNA for a while,
mention that in the module description.
v2: Add CDNA as well (Alex)
Signed-off-by: Peter Maucher <bellosilicio@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Document difference between amdgpu.gartsize and amdgpu.gttsize
module parameters, as initially explained by Alex Deucher here:
https://lists.freedesktop.org/archives/dri-devel/2022-October/375358.html
v2: minor cleanups (Alex)
Signed-off-by: Peter Maucher <bellosilicio@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the open-code with sysfs_emit() to simplify the code.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes DMCU initialization in APU GPU passthrough. The
DMCU needs the GPU physical address, not the CPU physical
address. This ends up working out on bare metal because
we always use the physical address, but doesn't work in
passthrough because the addresses are different.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Under virtualization guest needs to receive notification from host to
perform reset in some cases. Add nv mailbox irq in soc21.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that uses PSP to initialize HW.
Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that uses PSP to initialize HW.
Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This fixes a concrete bug but is also the basis for some cleanup work,
so I'm merging it based on the offending commit in order to minimize
future conflicts.
* commit '7e1864332fbc1b993659eab7974da9fe8bf8c128':
riscv: fix race when vmap stack overflow
|
