summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-01Merge tag 'vexpress-for-v4.5/fixes-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes vexpress fixes for v4.5 Couple of minor fixes for vexpress platforms: 1. Add missing of_node_put in vexpress config bus 2. Add missing DMA-330 abort interrupt on Juno platforms * tag 'vexpress-for-v4.5/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01Merge tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.5 (part 1) - Fix dts on buffalo linksations machines (gpios and leds) - Fix dts partition node according to new binding introduced in v4.5 * tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu: ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl ARM: mvebu: ix4-300d: Add compatible property to "partitions" node ARM: mvebu: kirkwood: Add compatible property to "partitions" node Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01Merge tag 'omap-for-v4.5/fixes-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps with the most intrusive stuff being read-only data assembly fixes, the other things are mostly board related: - A series of omap assembly code fixes to fix issues with rodata with ARM_KERNMEM_PERMS enabled. We had several places writing to rodata, which is bad. The fix in most cases is to load the value from data section using a pointer. Let's also enable ARM_KERNMEM_PERMS so DEBUG_RODATA gets selected by default. And while testing things, I also added few more loadable driver modules to the defconfig that I seem to need quite often. - Fix a long standing omap5 RTC mystery and enable RTC where we need to ensure the SoC msecure pin is high so we can write to the RTC registers. - Fix irq types for am437x - A series of minor dts fixes for sbc-am57x and cl-som-am57x - Fixes for torpedo dts to make WLAN behave and to remove a duplicate i2c rate entry This series also includes few minor changes that are not stricly fixes, but would be good to get in during the early -rc cycle: - Remove legacy mailbox platform data that is no longer needed - Add the pdata-quirks needed for the new pwm-omap-dmtimer so people can use it - Enable ti,mbox-send-noirq that's needed by wkup_m3 driver - Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the initramfs quite a bit smaller * tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits) ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: Fix wl12xx missing clocks that cause hangs ARM: OMAP: Add PWM dmtimer platform data quirks ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata ARM: OMAP2+: Fix l2_inv_api_params for rodata ARM: OMAP2+: Fix save_secure_ram_context for rodata ARM: OMAP2+: Fix l2dis_3630 for rodata ARM: OMAP2+: Fix wait_dll_lock_timed for rodata ARM: OMAP2+: Remove legacy mailbox device instantiation ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox ... Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01Merge tag 'at91-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes First fixes for 4.5. Only DT changes: - sama5d4: error in DBGU index - addition of phy properties in several boards - at91sam9n12ek fix a panel compatible string * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0 ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0 ARM: dts: at91: at91sam9n12ek: fix panel compatible string ARM: dts: at91: sama5d4: fix instance id of DBGU Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM64: tegra: Add chosen node for tegra132 norrinJon Hunter
The NVIDIA bootloader, nvtboot, expects the "chosen" node to be present in the device-tree blob and if it is not then it fails to boot the kernel. Add the chosen node so we can boot the kernel on Tegra132 Norrin with the nvtboot bootloader. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM: realview: use "depends on" instead of "if" after promptMasahiro Yamada
This platform recently moved to multi-platform, so missed the global fixup by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM: tango: use "depends on" instead of "if" after promptMasahiro Yamada
This platform was recently added, so missed the global fixup by commit e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt"). Fix it now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM: tango: use const and __initconst for smp_operationsMasahiro Yamada
This newly added code missed the global fixup by commit 75305275a721 ("ARM: use const and __initconst for smp_operations"). So fix it now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01ARM: realview: use const and __initconst for smp_operationsMasahiro Yamada
This newly added code missed the global fixup by commit 75305275a721 ("ARM: use const and __initconst for smp_operations"). So fix it now. Also, add missing "static" qualifier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01bus: uniphier-system-bus: revive tristate promptMasahiro Yamada
At first, commit 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") introduced this driver as a tristate one. Then, commit 326ea45aa827 ("bus: uniphier: allow only built-in driver") temporarily made it boolean in order to fix a link error in case it is compiled as a module. The root cause was fixed by commit b80443c2211c ("of/platform: export of_default_bus_match_table"). Now this driver can really be a module. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01iio: dht11: Use boottimeAbhilash Jindal
Wall time obtained from ktime_get_real_ns is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for comparing two timestamps. Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-01[media] dvb-frontend: Use boottimeAbhilash Jindal
Wall time obtained from ktime_get_real is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for comparing two timestamps. [mchehab@osg.samsung.com: fix trivial merge conflicts] Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] media: Media Controller fix to not let stream_count go negativeShuah Khan
Change media_entity_pipeline_stop() to not decrement stream_count of an inactive media pipeline. Doing so, results in preventing starting the pipeline. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] media: Fix media_open() to clear filp->private_data in error legShuah Khan
Fix media_open() to clear filp->private_data when file open fails. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] media: i2c: Don't export ir-kbd-i2c module aliasJavier Martinez Canillas
This is a partial revert of commit ed8d1cf07cb16d ("[media] Export I2C module alias information in missing drivers") that exported the module aliases for the I2C drivers that were missing to make autoload to work. But there is a bug report [0] that auto load of the ir-kbd-i2c driver cause the Hauppauge HD-PVR driver to not behave correctly. This is a hdpvr latent bug that was just exposed by ir-kbd-i2c module autoloading working and will also happen if the I2C driver is built-in or a user calls modprobe to load the module and register the driver. But there is a regression experimented by users so until the real bug is fixed, let's not export the module alias for the ir-kbd-i2c driver even when this just masks the actual issue. [0]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810726 Fixes: ed8d1cf07cb1 ("[media] Export I2C module alias information in missing drivers") Cc: <stable@vger.kernel.org> # 4.3+ Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-02-01[media] v4l: remove MEDIA_TUNER dependency for VIDEO_TUNERArnd Bergmann
em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER, so we get a Kconfig warning if that is disabled: warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER) VIDEO_TUNER does not actually depend on MEDIA_TUNER, and the dependency does nothing except cause the above warning, so let's remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] b2c2: flexcop: avoid unused function warningsArnd Bergmann
The flexcop driver has two functions that are normally used, except when multiple frontend drivers are disabled: drivers/media/common/b2c2/flexcop-fe-tuner.c:42:12: warning: 'flexcop_set_voltage' defined but not used [-Wunused-function] drivers/media/common/b2c2/flexcop-fe-tuner.c:71:12: warning: 'flexcop_sleep' defined but not used [-Wunused-function] This avoids the build warning by updating the #ifdef for flexcop_set_voltage to the exact condition under which it is used. For flexcop_sleep, the condition is rather complex, so I resort to marking it as __maybe_unused, so the compiler can silently drop it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] hdpvr: hide unused variableArnd Bergmann
The i2c client pointer is only used when CONFIG_I2C is set, and otherwise produces a compile-time warning: drivers/media/usb/hdpvr/hdpvr-core.c: In function 'hdpvr_probe': drivers/media/usb/hdpvr/hdpvr-core.c:276:21: error: unused variable 'client' [-Werror=unused-variable] This uses the same #ifdef to hide the variable when the code using it is hidden. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] media: platform: exynos4-is: media-dev: Add missing of_node_putAmitoj Kaur Chawla
for_each_available_child_of_node and for_each_child_of_node perform an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. The simplified version of the semantic patch that is used for this is as follows: // <smpl> @@ local idexpression n; expression e,r; @@ for_each_available_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] dvbdev: the space is required after ','Xiubo Li
The space is missing after ',', and this will be introduce much noise when checking new patch around them. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] dvbdev: replace kcalloc with kzallocXiubo Li
Since the number of elements equals to 1, so just use kzalloc to simplify the code and make it more readable. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] dvbdev: remove useless parentheses after returnXiubo Li
The parentheses are not required after return, and just remove it. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] pwc: Add USB id for Philips Spc880nc webcamHans de Goede
SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.html Cc: stable@vger.kernel.org Reported-by: Kikim <klucznik0@op.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] s5c73m3: remove duplicate module device tableArnd Bergmann
Clang complains about an extraneous definition of the module device table after the patch to add it was accidentally merged twice: ../drivers/media/i2c/s5c73m3/s5c73m3-spi.c:40:1: error: redefinition of '__mod_of__s5c73m3_spi_ids_device_table' MODULE_DEVICE_TABLE(of, s5c73m3_spi_ids); ^ ../include/linux/module.h:223:27: note: expanded from macro 'MODULE_DEVICE_TABLE' extern const typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:99:1: note: expanded from here __mod_of__s5c73m3_spi_ids_device_table This removes the second definition. Fixes: f934a94bb566 ("[media] s5c73m3: Export OF module alias information") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] omap3isp: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] exynos4-is: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] tvp7002: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] tvp514x: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] s5k5baf: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] s5c73m3: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] adv7604: Check v4l2_of_parse_endpoint() return valueJavier Martinez Canillas
The v4l2_of_parse_endpoint() function can fail so check the return value. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] v4l: of: Correct v4l2_of_parse_endpoint() kernel-docJavier Martinez Canillas
The v4l2_of_parse_endpoint function kernel-doc says that the return value is always 0. But that is not true since the function can fail and a error negative code is returned on failure. So correct the kernel-doc to match. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] v4l: Merge the YUV and YVU 4:2:0 tri-planar non-contiguous formats docsLaurent Pinchart
The two formats are very similar, having two separate pages to describe them is overkill. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] rcar_jpu: Add R-Car Gen2 Fallback Compatibility StringSimon Horman
Add fallback compatibility string. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] netup_unidvb: Remove a useless memsetChristophe JAILLET
This memory is allocated using kzalloc so there is no need to call memset(..., 0, ...) [mchehab@osg.samsung.com: as suggested by Joe Perches, It's unusual to not see the alloc above the if, removed a blank line between kzalloc/if and added a blank line after if] Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] ts2020: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte
ts2020_remove was calling kfree(dev) with possibly still active schedule_delayed_work(dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] rtl2830: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte
rtl2830_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] si2157: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte
si2157_remove was calling kfree(dev) with possibly still active schedule_delayed_work(dev->stat_work). This caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] af9033: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte
af9033_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] af9013: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte
af9013_remove was calling kfree(state) with possibly still active schedule_delayed_work(&state->statistics_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01ALSA: timer: Fix link corruption due to double start or stopTakashi Iwai
Although ALSA timer code got hardening for races, it still causes use-after-free error. This is however rather a corrupted linked list, not actually the concurrent accesses. Namely, when timer start is triggered twice, list_add_tail() is called twice, too. This ends up with the link corruption and triggers KASAN error. The simplest fix would be replacing list_add_tail() with list_move_tail(), but fundamentally it's the problem that we don't check the double start/stop correctly. So, the right fix here is to add the proper checks to snd_timer_start() and snd_timer_stop() (and their variants). BugLink: http://lkml.kernel.org/r/CACT4Y+ZyPRoMQjmawbvmCEDrkBD2BQuH7R09=eOkf5ESK8kJAw@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-01ALSA: seq: Fix yet another races among ALSA timer accessesTakashi Iwai
ALSA sequencer may open/close and control ALSA timer instance dynamically either via sequencer events or direct ioctls. These are done mostly asynchronously, and it may call still some timer action like snd_timer_start() while another is calling snd_timer_close(). Since the instance gets removed by snd_timer_close(), it may lead to a use-after-free. This patch tries to address such a race by protecting each snd_timer_*() call via the existing spinlock and also by avoiding the access to timer during close call. BugLink: http://lkml.kernel.org/r/CACT4Y+Z6RzW5MBr-HUdV-8zwg71WQfKTdPpYGvOeS7v4cyurNQ@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-01ALSA: pcm: Fix potential deadlock in OSS emulationTakashi Iwai
There are potential deadlocks in PCM OSS emulation code while accessing read/write and mmap concurrently. This comes from the infamous mmap_sem usage in copy_from/to_user(). Namely, snd_pcm_oss_write() -> &runtime->oss.params_lock -> copy_to_user() -> &mm->mmap_sem mmap() -> &mm->mmap_sem -> snd_pcm_oss_mmap() -> &runtime->oss.params_lock Since we can't avoid taking params_lock from mmap code path, use trylock variant and aborts with -EAGAIN as a workaround of this AB/BA deadlock. BugLink: http://lkml.kernel.org/r/CACT4Y+bVrBKDG0G2_AcUgUQa+X91VKTeS4v+wN7BSHwHtqn3kQ@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-01ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer checkTakashi Iwai
NULL user-space buffer can be passed even in a normal path, thus it's not good to spew a kernel warning with stack trace at each time. Just drop snd_BUG_ON() macro usage there. BugLink: http://lkml.kernel.org/r/CACT4Y+YfVJ3L+q0i-4vyQVyyPD7V=OMX0PWPi29x9Bo3QaBLdw@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-01ALSA: seq: Fix race at closing in virmidi driverTakashi Iwai
The virmidi driver has an open race at closing its assigned rawmidi device, and this may lead to use-after-free in snd_seq_deliver_single_event(). Plug the hole by properly protecting the linked list deletion and calling in the right order in snd_virmidi_input_close(). BugLink: http://lkml.kernel.org/r/CACT4Y+Zd66+w12fNN85-425cVQT=K23kWbhnCEcMB8s3us-Frw@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-01[media] rtl28xxu: retry failed i2c messagesAntti Palosaari
Sometimes i2c transfer fails. That happens especially when large amount of data is written sequentially eg. firmware download. Problem arises with both integrated rtl2832 demod and external mn88472 demod, which is clear indicator it is busy i2c bus issue. Use i2c core retry logic in order fix the issue by repeating failed message. Another solution which also works is to add ~100us delay between i2c messages - but repeating sounds more elegant and does not cause any extra delay for success cases. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] dvb-usb-dvbsky: add new product id for TT CT2-4650 CITorbjörn Jansson
Add a new product id to dvb-usb-dvbsky for new version of TechnoTrend CT2-4650 CI Signed-off-by: Torbjörn Jansson <torbjorn.jansson@mbox200.swipnet.se> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] af9035: add support for 2nd tuner of MSI DigiVox DiversityStefan Pöschel
PIP tested with VLC. Diversity tested with the Windows driver. Signed-off-by: Stefan Pöschel <basic.master@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] dw2102: Add support for Terratec Cinergy S2 USB BOXPhilipp Zabel
The Terratec Cinergy S2 USB BOX uses a Montage M88TS2022 tuner and a M88DS3103 demodulator, same as Technotrend TT-connect S2-4600. This patch adds the missing USB Product ID to make it work. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] si2157.c: fix frequency rangeAndrei Koshkosh
According with: https://www.silabs.com/Support%20Documents/TechnicalDocs/Si2157-short.pdf The RF input frequency range of this demod is from 42MHz to 870 MHz. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit (git 2.34.1) at 2025-09-14 09:49:04 +0000