| Age | Commit message (Collapse) | Author |
|---|
|
"echo c > /proc/sysrq-trigger" does not result in a system crash. There
are two problems. One is that the trap handler ignores the global
variable, panic_on_oops. The other is that smp_send_stop() is a no-op
which leaves the other cpus running normally when one cpu panics.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the function starfire_hard_smp_processor_id() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removes some functions that are not used anywhere:
do_fpdis_tl1() do_iae_tl1() do_dae_tl1() do_cee_tl1()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
put_rpccred() can sleep.
Fixes: 8f649c3762547 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()")
Cc: stable@vger.kernel.org # 2.6.35+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the server does not return a valid set of attributes that we can
use to either create a file or refresh the inode, then there is no
value in calling nfs_prime_dcache().
However if we're just refreshing the inode using the attributes that
the server returned, then it shouldn't matter whether or not we have
a filehandle, as long as we check the fsid+fileid combination.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
When we call readdirplus, set the fileid normally returned by readdir
as the mounted-on-fileid, since that is commonly the case if there is
a mountpoint. To ensure that we get it right, we only set the flag if
the readdir fileid differs from the one returned in the readdirplus
attributes.
This again means that we can avoid the issues described in commit
2ef47eb1aee17 ("NFS: Fix use of nfs_attr_use_mounted_on_fileid()"),
which only fixed NFSv4.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If we're traversing a directory which contains a submounted filesystem,
or one that has a referral, the NFS server that is processing the READDIR
request will often return information for the underlying (mounted-on)
directory. It may, or may not, also return filehandle information.
If this happens, and the lookup in nfs_prime_dcache() returns the
dentry for the submounted directory, the filehandle comparison will
fail, and we call d_invalidate(). Post-commit 8ed936b5671bf
("vfs: Lazily remove mounts on unlinked files and directories."), this
means the entire subtree is unmounted.
The following minimal patch addresses this problem by punting on
the invalidation if there is a submount.
Kudos to Neil Brown <neilb@suse.de> for having tracked down this
issue (see link).
Reported-by: Nix <nix@esperi.org.uk>
Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nix
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Ensure that we don't regress the changes that were made to the
directory.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfs_post_op_update_inode() is called after a self-induced attribute
update. Ensure that it also sets the barrier.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prior to this patch, we used to always OK attribute updates that extended
the file size on the assumption that we might be performing writeback.
Now that we have attribute barriers to protect the writeback related updates,
we should remove this hack, as it can cause truncate() operations to
apparently be reverted if/when a readahead or getattr RPC call races
with our on-the-wire SETATTR.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Ensure that other operations that race with delegreturn and layoutcommit
cannot revert the attribute updates that were made on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Ensure that other operations that race with our write RPC calls
cannot revert the file size updates that were made on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Ensure that we update the attribute barrier even if there were no
invalidations, provided that this value is newer than the old one.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Ensure that other operations which raced with our setattr RPC call
cannot revert the file attribute changes that were made on the server.
To do so, we artificially bump the attribute generation counter on
the inode so that all calls to nfs_fattr_init() that precede ours
will be dropped.
The motivation for the patch came from Chuck Lever's reports of readaheads
racing with truncate operations and causing the file size to be reverted.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The O_DIRECT code will grab the inode->i_mutex and flush out buffered
writes, before scheduling a read or a write. However there is no
equivalent in the buffered write code to wait for O_DIRECT to complete.
Fixes a reported issue in xfstests generic/133, when first performing an
O_DIRECT write followed by a buffered write.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Convert these uses to:
seq_printf(seq, ...);
return 0;
Done via cocci script:
@@
struct seq_file *seq;
int i;
@@
- i = seq_printf(seq,
+ seq_printf(seq,
...);
...
- return i;
+ return 0;
@@
struct seq_file *seq;
int i;
@@
- i = 0;
- i += seq_printf(seq,
+ seq_printf(seq,
...);
...
- return i;
+ return 0;
With some additional reformatting and typing post conversion
to remove the now unnecessary "int i;" declaration.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Code reformatting based on checkpatch.pl with --strict:
Comparison to NULL rewritten as !indio_dev
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Code reformatting based on checkpatch.pl with --strict:
Lines over 80 characters were fixed
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Code reformatting based on checkpatch.pl with --strict:
Alignment should match open paranthesis cases corrected
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the internal device state to to disabled after hardware reset in stop flow.
This will cover cases when driver was not brought to disabled state because of
an error and in stop flow we wish not to retry the reset.
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reading of analog input channels by the `INSN_READ` comedi instruction
is broken for all except channel 0. `pci171x_ai_insn_read()` calls
`pci171x_ai_read_sample()` with the wrong value for the third parameter.
It is supposed to be the current index in a channel list (which is
always of length 1 in this case, so the index should be 0), but instead
it is passing the actual channel number. `pci171x_ai_read_sample()`
checks the channel number encoded in the raw sample value read from the
hardware matches the channel number stored in the specified index of the
previously set up channel list and returns `-ENODATA` if it doesn't
match. Since the index should always be 0 in this case, the match will
fail unless the channel number is also 0. Fix it by passing 0 as the
channel index.
Note that when the bug first appeared, it was `pci171x_ai_dropout()`
that was called with the wrong parameter value. `pci171x_ai_dropout()`
got replaced with `pci171x_ai_read_sample()` in commit 7fd2dae2500d
("staging: comedi: adv_pci1710: introduce pci171x_ai_read_sample()").
Fixes: 16c7eb6047bb ("staging: comedi: adv_pci1710: always enable PCI171x_PARANOIDCHECK code")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org> # 3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ADLINK's MS Windows drivers for the PCI-6208/6216 boards include the
following line in the DDInstall secion of the INF file:
%String6208%=DriverInstall6208.NT,PCI\VEN_10B5&DEV_9050&SUBSYS_62089999
That's for a PLX PCI 9050/9052 PCI interface chip with custom subvendor
and subdevice ID. The "%String6208%" macro expands to "ADLINK PCI-6208"
in the INF file.
Add a corresponding entry to this driver module's PCI device table.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver module now only supports a single board type, so remove the
infrastructure for describing multiple board types. The comedi
"auto_attach" handler, `pci6208_auto_attach()` doesn't need to set the
comedi device's `board_name` or `board_ptr` members. The former is
automatically pointed to the comedi driver's `driver_name` by the core
comedi module, and the latter is not used anywhere else. The AO
subdevice's `n_chans` member can be set to 16 without looking it up in
the single element of `pci6208_boards[]`. There is no need to pass a
board index from the PCI device table to the "auto_attach" handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This module's PCI device table has separate PCI device IDs for PCI-6208
and PCI-6216, but in reality, both boards and their cPCI and PCIe
variants seem to have the same PCI device ID: 0x6208. The PCI subdevice
ID doesn't seem to help either.
It shouldn't do any harm to claim 16 AO channels for all devices
supported by this driver. The original PCI-6216 is just a PCI-6208 with
a daughter board providing the extra DACs. The data is clocked out to
the DACs serially with no acknowledgment. I assume this would still
happen when the DACs for the upper 8 channels are missing. Therefore,
change the driver to support a single board type with 16 AO channels,
and remove the suspicious PCI device ID for the PCI-6216.
Evidence about lack of a separate PCI device ID for PCI-6216 follows....
1. Jesus Vasquez reports the following lspci output for a PCIe-6216 on
his Ubuntu 12.04 system:
lspci -n -vvv
07:00.0 1180: 144a:6208 (rev 02)
Subsystem: 144a:6208
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f6000000 (32-bit, non-prefetchable)
[size=128]
Region 1: I/O ports at c100 [size=128]
Region 2: I/O ports at c000 [size=256]
Kernel driver in use: adl_pci6208
Kernel modules: adl_pci6208
That system's "adl_pci6208" module only has the single PCI device ID for
the PCI-6208, but works for his PCIe-6216 except that it only supports 8
analog output channels instead of 16.
2. ADLINK's binary Linux module "pci6208.ko" (there is no separate
module for the PCI-6216) has a single alias:
alias: pci:v0000144Ad00006208sv*sd*bc*sc*i*
3. The MS Windows drivers include this set of hardware IDs for the
PCI-6208 series, with nothing more specific for the PCI-6216 (they are
all tied to the same name "ADLINK PCI-6208" and there is no mention of
PCI-6216):
PCI\VEN_10B5&DEV_9050&SUBSYS_62089999
PCI\VEN_144A&DEV_6208&SUBSYS_6208144A
PCI\VEN_144A&DEV_6208&SUBSYS_62089999
PCI\VEN_144A&DEV_6208&SUBSYS_C208144A
PCI\VEN_144A&DEV_6208&SUBSYS_C20855AA
PCI\VEN_144A&DEV_6208
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hardware has an 8254 timer/counter. Channe; 0 is available as a
generic counter/timer with the clock, gate, and output signals all
availabe on the main 37 pin connector. Channels 1 and 2 are used for
the pacer.
Add support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add subdevices for the 4 digital input and 4 digital output channels on
the main connector of the board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For aesthetics, add some whitespace to the subdevice init.
Remove the unnecessary comments as well as the initialization of the
analog input subdevice 'len_chanlist'. That member is only used by
subdevices that support async commands.
For aesthetics, rename the analog input subdevice (*insn_read) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog output range is not programmable. The DAC ranges are
jumper-settable on the board. For aesthetics, provide a range table
for the user with all possible ranges.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add defines for the registers and bits. Use the defines to remove the
"magic" numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hardware uses a switch on the board to select if the analog inputs
are bipolar or uinipolar. The gain is programmable to allow the following
input ranges:
Gain Bipolar Unipolar
0 +/-10V 0 to 10V
1 +/-5V 0 to 5V
2 +/-2.5V 0 to 2.5V
3 +/-1.25V 0 to 1.25V
Add the necessary code to the driver to allow the user to select the
desired range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hardware uses a switch on the board to set the number of analog
input channels to either 16 single-ended or 8 differential channels.
Currently the switch setting is checked for every (*insn_read) operation
to validate the channel number.
Check the switch setting during the driver attach and initialize the
subdevice accordingly. This allows the core to handle the validation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All the comedi drivers have been converted to use the comedi_8254 module
to provide support for the 8254 timers. Remove this unused header.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
The hardware actually has two 8254 devices. Timer B0 is the master for timed
conversions, timer B1 sets the scan pacing, and tmer A0 sets the conversion
pacing.
For the conversion, dev->pacer is used for the "B" timers and a new private
data member, dev->counter, is used for the "A" timers. All the divisor values
are stored in the dev->pacer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
module
Convert this driver to use the comedi_8254 module to provide the 8254 timer support.
Add 'clock_src' and 'gate_src' members to the comedi_8254 data for convienence.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dio200_subdev_8254
Currently this driver uses a spinlock in the 8254 subdevice (*insn_read), (*insn_write),
and (*insn_config) functions. The comedi core checks if the subdevice is 'busy', in
parse_insn(), before any of the subdevice functions are attempted.
Remove the unnecessary spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'counter_number' in these functions is the comedi channel number from the
chanspec. The comedi core validates the chanspec before calling the driver
functions. Remove the unnecessary checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dio200_subdev_8254
This member is only used in the "set gate" and "set clock" helper functions. Remove
it and calculate the value when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dio200_subdev_8254
This member is only used one place in the driver. Remove it and calculate the
register offset when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dio200_subdev_8254
This member is only used one place in the driver. Remove it and calculate the
register offset when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the DIO200_[XYZ]GAT_SEL defines with a macro that returns the
correct register offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the DIO200_[XYZ]CLK_SEL defines with a macro that returns the
correct register offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hardware supported by this driver does not have an 8254 timer. Remove the
unnecessary include of "8253.h".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the hardware supported by this driver include an 8254 timer. For
aesthetics, convert it to use the comedi_8254 module to provide support for
the 8254 timer.
This also fixes the (*insn_read) and (*insn_write) to work like the comedi
API expects. Currently they only read or write a single value.
It also fixes the (*insn_config). Currently the driver is attempting to
handle the configuration instructions GPCT_RESET and GPCT_SET_OPERATION.
These are just arbitrary valuse and are not real comedi configuration_ids.
They actually coorespond to:
GPCT_RESET -> INSN_CONFIG_DIO_OUTPUT
GPCT_SET_OPERATION -> INSN_CONFIG_ANALOG_TRIG
The number of parameters for the instructions is validated by the comedi
core in check_insn_config_length(). GPCT_RESET happens to work (insn->n == 1)
but GPCT_SET_OPERATION would fail. The INSN_CONFIG_ANALOG_TRIG expects
insn->n == 5 but GPCT_SET_OPERATION in this driver expects insn->n == 2.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the hardware supported by this driver includes an 8254 timer. For
aesthetics, convert it to use the comedi_8254 module to provide support for
the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The boardinfo for the 8254 timer is overly complex. The 8254 timer always has
3 channels and the 'regs' and 'specflags' members of diosubd_data are not
used. The only necessary information is the base 'addr' offset to the 8254
registers.
Replace the 's8254' member with an unsigned long 'timer_regbase'. Use that
to determine if the board has an 8254 timer during the attach of the driver.
Save the 'timer_regbase' in the subdevice 'private' pointer to use in the
subdevice functions.
For aesthetics, absorb pci_dio_add_8254() into the driver attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only two of the boards supported by this driver have an 8254 counter/timer.
Both of these boards have a single 8254 device. Currently the counter
subdevice functions are coded to support multiple 8254 devices. This is
unnecessary and just complicates the code.
Simplfy the subdevice functions to work for a single 8254 counter/timer and
refactor the driver (*attach) accordingly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Tidy up the (*do_cmdtest) validation of the timer arguments.
Absorb the converted das1800_setup_counters() code into the (*do_cmd).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
