summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-23Merge tag 'trace-v6.2-rc7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix race that causes a warning of corrupt ring buffer With the change that allows to read the "trace" file without disabling writing to the ring buffer, there was an integrity check of the ring buffer in the iterator read code, that expected the ring buffer to be write disabled. This caused the integrity check to trigger when stress reading the "trace" file while writing was happening. The integrity check is a bit aggressive (and has never triggered in practice). Change it so that it checks just the integrity of the linked pages without clearing the flags inside the pointers. This removes the warning that was being triggered" [ Heh. This was supposed to have gone in last week before the 6.2 release, but Steven forgot to actually add me to the participants of the pull request, so here it is, a week later - Linus ] * tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Handle race between rb_move_tail and rb_check_pages
2023-02-23Merge tag 'trace-tools-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: - Use total duration to calculate average in rtla osnoise_hist - Use 2 digit precision for displaying average - Print an intuitive auto analysis of timerlat results - Add auto analysis to timerlat top - Add hwnoise, which is the same as osnoise but focuses on hardware - Small clean ups * tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation/rtla: Add hwnoise man page rtla: Add hwnoise tool Documentation/rtla: Add timerlat-top auto-analysis options rtla/timerlat: Add auto-analysis support to timerlat top rtla/timerlat: Add auto-analysis core tools/tracing/rtla: osnoise_hist: display average with two-digit precision tools/tracing/rtla: osnoise_hist: use total duration for average calculation tools/rv: Remove unneeded semicolon
2023-02-23net: sunhme: Fix region requestSean Anderson
devm_request_region is for I/O regions. Use devm_request_mem_region instead. This fixes the driver failing to probe since 99df45c9e0a4 ("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the result. Fixes: 914d9b2711dd ("sunhme: switch to devres") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230222204242.2658247-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-23Merge tag 'ktest-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Fix three instances that the tty is not given back to the console on exit. Forcing the user to do a "reset" to get the console back. - Fix the console monitor to not hang when too much data is given by the ssh output. * tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Restore stty setting at first in dodie ktest.pl: Add RUN_TIMEOUT option with default unlimited ktest.pl: Give back console on Ctrt^C on monitor ktest.pl: Fix missing "end_monitor" when machine check fails
2023-02-23Merge tag 'linux-kselftest-kunit-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit update from Shuah Khan: - add Function Redirection API to isolate the code being tested from other parts of the kernel. Documentation/dev-tools/kunit/api/functionredirection.rst has the details. * tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Add printf attribute to fail_current_test_impl lib/hashtable_test.c: add test for the hashtable structure Documentation: Add Function Redirection API docs kunit: Expose 'static stub' API to redirect functions kunit: Add "hooks" to call into KUnit when it's built as a module kunit: kunit.py extract handlers tools/testing/kunit/kunit.py: remove redundant double check
2023-02-23Merge tag 'linux-kselftest-next-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: - several patches to fix incorrect kernel headers search path from Mathieu Desnoyers - a few follow-on fixes found during testing the above change - miscellaneous fixes - support for filtering and enumerating tests * tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits) selftests/user_events: add a note about user_events.h dependency selftests/mount_setattr: fix to make run_tests failure selftests/mount_setattr: fix redefine struct mount_attr build error selftests/sched: fix warn_unused_result build warns selftests/ptp: Remove clean target from Makefile selftests: use printf instead of echo -ne selftests/ftrace: Fix bash specific "==" operator selftests: tpm2: remove redundant ord() selftests: find echo binary to use -ne options selftests: Fix spelling mistake "allright" -> "all right" selftests: tdx: Use installed kernel headers search path selftests: ptrace: Use installed kernel headers search path selftests: memfd: Use installed kernel headers search path selftests: iommu: Use installed kernel headers search path selftests: x86: Fix incorrect kernel headers search path selftests: vm: Fix incorrect kernel headers search path selftests: user_events: Fix incorrect kernel headers search path selftests: sync: Fix incorrect kernel headers search path selftests: seccomp: Fix incorrect kernel headers search path selftests: sched: Fix incorrect kernel headers search path ...
2023-02-23Merge tag 'nolibc.2023.02.06a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Add s390 support - Add support for the ARM Thumb1 instruction set - Fix O_* flags definitions for open() and fcntl() - Make errno a weak symbol instead of a static variable - Export environ as a weak symbol - Export _auxv as a weak symbol for auxilliary vector retrieval - Implement getauxval() and getpagesize() - Further improve self tests, including permitting userland testing of the nolibc library * tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (28 commits) selftests/nolibc: Add a "run-user" target to test the program in user land selftests/nolibc: Support "x86_64" for arch name selftests/nolibc: Add `getpagesize(2)` selftest nolibc/sys: Implement `getpagesize(2)` function nolibc/stdlib: Implement `getauxval(3)` function tools/nolibc: add auxiliary vector retrieval for s390 tools/nolibc: add auxiliary vector retrieval for mips tools/nolibc: add auxiliary vector retrieval for riscv tools/nolibc: add auxiliary vector retrieval for arm tools/nolibc: add auxiliary vector retrieval for arm64 tools/nolibc: add auxiliary vector retrieval for x86_64 tools/nolibc: add auxiliary vector retrieval for i386 tools/nolibc: export environ as a weak symbol on s390 tools/nolibc: export environ as a weak symbol on riscv tools/nolibc: export environ as a weak symbol on mips tools/nolibc: export environ as a weak symbol on arm tools/nolibc: export environ as a weak symbol on arm64 tools/nolibc: export environ as a weak symbol on i386 tools/nolibc: export environ as a weak symbol on x86_64 tools/nolibc: make errno a weak symbol instead of a static one ...
2023-02-23spi: tegra210-quad: set half duplex flagKrishna Yarlagadda
Tegra QSPI controller only supports half duplex transfers. Set half duplex constrain flag. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/20230223162635.19747-3-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-23Merge tag 'nmi.2023.02.14a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull x86 NMI diagnostics from Paul McKenney: "Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs on the one hand and failing hardware on the other" * tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: x86/nmi: Print reasons why backtrace NMIs are ignored x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
2023-02-23Merge tag 'lkmm.2023.02.15a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney: "Documentation updates. Add read-modify-write sequences, which means that stronger primitives more consistently result in stronger ordering, while still remaining in the envelope of the hardware that supports Linux. Address, data, and control dependencies used to ignore data that was stored in temporaries. This update extends these dependency chains to include unmarked intra-thread stores and loads. Note that these unmarked stores and loads should not be concurrently accessed from multiple threads, and doing so will cause LKMM to flag such accesses as data races" * tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools: memory-model: Make plain accesses carry dependencies Documentation: Fixed a typo in atomic_t.txt tools: memory-model: Add rmw-sequences to the LKMM locking/memory-barriers.txt: Improve documentation for writel() example
2023-02-23HID: cp2112: Fix driver not registering GPIO IRQ chip as threadedDanny Kaehn
The CP2112 generates interrupts from a polling routine on a thread, and can only support threaded interrupts. This patch configures the gpiochip irq chip with this flag, disallowing consumers to request a hard IRQ from this driver, which resulted in a segfault previously. Signed-off-by: Danny Kaehn <kaehndan@gmail.com> Link: https://lore.kernel.org/r/20230210170044.11835-1-kaehndan@gmail.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-23irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()Juergen Gross
The recent switch to per-domain locking caused a NULL dereference in irq_domain_create_hierarchy(), as Xen code is calling msi_create_irq_domain() with a NULL parent pointer. Fix that by testing parent to be set before dereferencing it. For a non-existing parent the irqdomain's root will stay to point to itself. Fixes: 9dbb8e3452ab ("irqdomain: Switch to per-domain locking") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230223083800.31347-1-jgross@suse.com
2023-02-23Merge branch 'irq/core' into irq/urgentThomas Gleixner
Pull in the upstream changes so a fix for them can be applied.
2023-02-23selftest: hid: fix hid_bpf not set in configBenjamin Tissoires
Now that CONFIG_HID_BPF is not automatically implied by HID, we need to set it properly in the selftests config. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-02-23octeontx2-pf: Recalculate UDP checksum for ptp 1-step sync packetGeetha sowjanya
When checksum offload is disabled in the driver via ethtool, the PTP 1-step sync packets contain incorrect checksum, since the stack calculates the checksum before driver updates PTP timestamp field in the packet. This results in PTP packets getting dropped at the other end. This patch fixes the issue by re-calculating the UDP checksum after updating PTP timestamp field in the driver. Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Link: https://lore.kernel.org/r/20230222113600.1965116-1-saikrishnag@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23Merge branch 'net-phy-eee-fixes'Paolo Abeni
Oleksij Rempel says: ==================== net: phy: EEE fixes changes v3: - add kernel test robot tags to commit log - reword comment for genphy_c45_an_config_eee_aneg() function changes v2: - restore previous ethtool set logic for the case where advertisements are not provided by user space. - use ethtool_convert_legacy_u32_to_link_mode() where possible - genphy_c45_an_config_eee_aneg(): move adv initialization in to the if scope. Different EEE related fixes. ==================== Link: https://lore.kernel.org/r/20230222055043.113711-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: genphy_c45_ethtool_set_eee: validate EEE link modesOleksij Rempel
Currently, it is possible to let some PHYs to advertise not supported EEE link modes. So, validate them before overwriting existing configuration. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: do not force EEE supportOleksij Rempel
With following patches: commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: add genphy_c45_an_config_eee_aneg() functionOleksij Rempel
Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: use "supported_eee" instead of supported for access validationOleksij Rempel
Make sure we use proper variable to validate access to potentially not supported registers. Otherwise we will get false read/write errors. Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202302211644.c12d19de-yujie.liu@intel.com Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23Merge tag 'gvt-next-fixes-2023-02-23' of https://github.com/intel/gvt-linux ↵Jani Nikula
into drm-intel-next-fixes gvt-next-fixes-2023-02-23 - use debugfs attribute for gvt debugfs entries (Deepak R Varma) - fix memory leak in vgpu destroy for debugfs_lookup() then remove (Greg KH) - fix DRM_I915_GVT kconfig symbol to unbreak menu presentation (Randy Dunlap) - fix typos (Deepak R Varma, Colin Ian King) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y/co4cy10KM1/2uX@debian-scheme
2023-02-23drm/i915: Don't use BAR mappings for ring buffers with LLCJohn Harrison
Direction from hardware is that ring buffers should never be mapped via the BAR on systems with LLC. There are too many caching pitfalls due to the way BAR accesses are routed. So it is safest to just not use it. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Tested-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com (cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-02-23drm/i915: Don't use stolen memory for ring buffers with LLCJohn Harrison
Direction from hardware is that stolen memory should never be used for ring buffer allocations on platforms with LLC. There are too many caching pitfalls due to the way stolen memory accesses are routed. So it is safest to just not use it. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Tested-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com (cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-02-23drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nvMavroudis Chatzilaridis
This laptop uses inverted backlight PWM. Thus, without this quirk, backlight brightness decreases as the brightness value increases and vice versa. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8013 Cc: stable@vger.kernel.org Signed-off-by: Mavroudis Chatzilaridis <mavchatz@protonmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230201184947.8835-1-mavchatz@protonmail.com (cherry picked from commit 83e7d6fd330d413cb2064e680ffea91b0512a520)
2023-02-23drm/i915/xelpmp: Consider GSI offset when doing MCR lookupsMatt Roper
MCR range tables use the final MMIO offset of a register (including the 0x380000 GSI offset when applicable). Since the i915_mcr_reg_t passed as a parameter during steering lookup does not include the GSI offset, we need to add it back in for GSI registers before searching the tables. Fixes: a7ec65fc7e83 ("drm/i915/xelpmp: Add multicast steering for media GT") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230214001906.1477370-1-matthew.d.roper@intel.com (cherry picked from commit d6683bbe70d4cdbf3da6acecf7d569cc6f0b4382) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-02-23spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bitsDhruva Gole
Replace the SPI_TX_OCTAL flag that appeared two time with SPI_RX_OCTAL in the chain of '|' operators while assigning to mode_bits Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver") Reported-by: David Binderman <dcb314@hotmail.com> Link: https://lore.kernel.org/all/DB6P189MB0568F3BE9384315F5C8C1A3E9CA49@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM/ Cc: stable@vger.kernel.org Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230223095202.924626-1-d-gole@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-23spi: cadence-quadspi: Fix cancel the indirect read maskHongbin Ji
This is to cancel the indirect read transfer process, so should be use CQSPI_REG_INDIRECTRD_CANCEL_MASK Signed-off-by: Hongbin Ji <jhb_ee@163.com> Link: https://lore.kernel.org/r/20230222092128.4237-1-jhb_ee@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-23regulator: core: Use ktime_get_boottime() to determine how long a regulator ↵Matthias Kaehlcke
was off For regulators with 'off-on-delay-us' the regulator framework currently uses ktime_get() to determine how long the regulator has been off before re-enabling it (after a delay if needed). A problem with using ktime_get() is that it doesn't account for the time the system is suspended. As a result a regulator with a longer 'off-on-delay' (e.g. 500ms) that was switched off during suspend might still incurr in a delay on resume before it is re-enabled, even though the regulator might have been off for hours. ktime_get_boottime() accounts for suspend time, use it instead of ktime_get(). Fixes: a8ce7bd89689 ("regulator: core: Fix off_on_delay handling") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230223003301.v2.1.I9719661b8eb0a73b8c416f9c26cf5bd8c0563f99@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-23HID: uhid: Over-ride the default maximum data buffer value with our ownLee Jones
The default maximum data buffer size for this interface is UHID_DATA_MAX (4k). When data buffers are being processed, ensure this value is used when ensuring the sanity, rather than a value between the user provided value and HID_MAX_BUFFER_SIZE (16k). Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-02-23HID: core: Provide new max_buffer_size attribute to over-ride the defaultLee Jones
Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-02-23net/mlx5: Fix memory leak in IPsec RoCE creationPatrisious Haddad
During IPsec RoCE TX creation a struct for the flow group creation is allocated, but never freed. Free that struct once it is no longer in use. Fixes: 22551e77e550 ("net/mlx5: Configure IPsec steering for egress RoCEv2 traffic") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/a69739482cca7176d3a466f87bbf5af1250b09bb.1677056384.git.leon@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23selftests: fib_tests: Add test cases for IPv4/IPv6 in route notifyLu Wei
Add tests to check whether the total fib info length is calculated corretly in route notify process. Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230222083629.335683-3-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23ipv6: Add lwtunnel encap size of all siblings in nexthop calculationLu Wei
In function rt6_nlmsg_size(), the length of nexthop is calculated by multipling the nexthop length of fib6_info and the number of siblings. However if the fib6_info has no lwtunnel but the siblings have lwtunnels, the nexthop length is less than it should be, and it will trigger a warning in inet6_rt_notify() as follows: WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130 ...... Call Trace: <TASK> fib6_add_rt2node+0x685/0xa30 fib6_add+0x96/0x1b0 ip6_route_add+0x50/0xd0 inet6_rtm_newroute+0x97/0xa0 rtnetlink_rcv_msg+0x156/0x3d0 netlink_rcv_skb+0x5a/0x110 netlink_unicast+0x246/0x350 netlink_sendmsg+0x250/0x4c0 sock_sendmsg+0x66/0x70 ___sys_sendmsg+0x7c/0xd0 __sys_sendmsg+0x5d/0xb0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This bug can be reproduced by script: ip -6 addr add 2002::2/64 dev ens2 ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100 for i in 10 20 30 40 50 60 70; do ip link add link ens2 name ipv_$i type ipvlan ip -6 addr add 2002::$i/64 dev ipv_$i ifconfig ipv_$i up done for i in 10 20 30 40 50 60; do ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1 dev ipv_$i metric 100 done ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100 This patch fixes it by adding nexthop_len of every siblings using rt6_nh_nlmsg_size(). Fixes: beb1afac518d ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230222083629.335683-2-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23Merge tag 'nand/for-6.3' into mtd/nextMiquel Raynal
NAND core changes: * Check the data only read pattern only once * Prepare the late addition of supported operation checks * Support for sequential cache reads * Fix nand_chip kdoc Raw NAND changes: * Fsl_elbc: Propagate HW ECC settings to HW * Marvell: Add missing layouts * Pasemi: Don't use static data to track per-device state * Sunxi: - Fix the size of the last OOB region - Remove an unnecessary check - Remove an unnecessary check - Clean up chips after failed init - Precompute the ECC_CTL register value - Embed sunxi_nand_hw_ecc by value - Update OOB layout to match hardware * tmio_nand: Remove driver * vf610_nfc: Use regular comments for functions SPI-NAND changes: * Add support for AllianceMemory AS5F34G04SND * Macronix: use scratch buffer for DMA operation NAND ECC changes: * Mediatek: - Add ECC support fot MT7986 IC - Add compatible for MT7986 - dt-bindings: Split ECC engine with rawnand controller
2023-02-23Merge tag 'spi-nor/for-6.3' into mtd/nextMiquel Raynal
SPI NOR changes: * small fixes on core and spansion driver.
2023-02-23objtool: Fix ORC 'signal' propagationJosh Poimboeuf
There have been some recently reported ORC unwinder warnings like: WARNING: can't access registers at entry_SYSCALL_64_after_hwframe+0x63/0xcd WARNING: stack going in the wrong direction? at __sys_setsockopt+0x2c6/0x5b0 net/socket.c:2271 And a KASAN warning: BUG: KASAN: stack-out-of-bounds in unwind_next_frame (arch/x86/include/asm/ptrace.h:136 arch/x86/kernel/unwind_orc.c:455) It turns out the 'signal' bit isn't getting propagated from the unwind hints to the ORC entries, making the unwinder confused at times. Fixes: ffb1b4a41016 ("x86/unwind/orc: Add 'signal' field to ORC metadata") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/97eef9db60cd86d376a9a40d49d77bb67a8f6526.1676579666.git.jpoimboe@kernel.org
2023-02-23objtool: Remove instruction::listPeter Zijlstra
Replace the instruction::list by allocating instructions in arrays of 256 entries and stringing them together by (amortized) find_insn(). This shrinks instruction by 16 bytes and brings it down to 128. struct instruction { - struct list_head list; /* 0 16 */ - struct hlist_node hash; /* 16 16 */ - struct list_head call_node; /* 32 16 */ - struct section * sec; /* 48 8 */ - long unsigned int offset; /* 56 8 */ - /* --- cacheline 1 boundary (64 bytes) --- */ - long unsigned int immediate; /* 64 8 */ - unsigned int len; /* 72 4 */ - u8 type; /* 76 1 */ - - /* Bitfield combined with previous fields */ + struct hlist_node hash; /* 0 16 */ + struct list_head call_node; /* 16 16 */ + struct section * sec; /* 32 8 */ + long unsigned int offset; /* 40 8 */ + long unsigned int immediate; /* 48 8 */ + u8 len; /* 56 1 */ + u8 prev_len; /* 57 1 */ + u8 type; /* 58 1 */ + s8 instr; /* 59 1 */ + u32 idx:8; /* 60: 0 4 */ + u32 dead_end:1; /* 60: 8 4 */ + u32 ignore:1; /* 60: 9 4 */ + u32 ignore_alts:1; /* 60:10 4 */ + u32 hint:1; /* 60:11 4 */ + u32 save:1; /* 60:12 4 */ + u32 restore:1; /* 60:13 4 */ + u32 retpoline_safe:1; /* 60:14 4 */ + u32 noendbr:1; /* 60:15 4 */ + u32 entry:1; /* 60:16 4 */ + u32 visited:4; /* 60:17 4 */ + u32 no_reloc:1; /* 60:21 4 */ - u16 dead_end:1; /* 76: 8 2 */ - u16 ignore:1; /* 76: 9 2 */ - u16 ignore_alts:1; /* 76:10 2 */ - u16 hint:1; /* 76:11 2 */ - u16 save:1; /* 76:12 2 */ - u16 restore:1; /* 76:13 2 */ - u16 retpoline_safe:1; /* 76:14 2 */ - u16 noendbr:1; /* 76:15 2 */ - u16 entry:1; /* 78: 0 2 */ - u16 visited:4; /* 78: 1 2 */ - u16 no_reloc:1; /* 78: 5 2 */ + /* XXX 10 bits hole, try to pack */ - /* XXX 2 bits hole, try to pack */ - /* Bitfield combined with next fields */ - - s8 instr; /* 79 1 */ - struct alt_group * alt_group; /* 80 8 */ - struct instruction * jump_dest; /* 88 8 */ - struct instruction * first_jump_src; /* 96 8 */ + /* --- cacheline 1 boundary (64 bytes) --- */ + struct alt_group * alt_group; /* 64 8 */ + struct instruction * jump_dest; /* 72 8 */ + struct instruction * first_jump_src; /* 80 8 */ union { - struct symbol * _call_dest; /* 104 8 */ - struct reloc * _jump_table; /* 104 8 */ - }; /* 104 8 */ - struct alternative * alts; /* 112 8 */ - struct symbol * sym; /* 120 8 */ - /* --- cacheline 2 boundary (128 bytes) --- */ - struct stack_op * stack_ops; /* 128 8 */ - struct cfi_state * cfi; /* 136 8 */ + struct symbol * _call_dest; /* 88 8 */ + struct reloc * _jump_table; /* 88 8 */ + }; /* 88 8 */ + struct alternative * alts; /* 96 8 */ + struct symbol * sym; /* 104 8 */ + struct stack_op * stack_ops; /* 112 8 */ + struct cfi_state * cfi; /* 120 8 */ - /* size: 144, cachelines: 3, members: 28 */ - /* sum members: 142 */ - /* sum bitfield members: 14 bits, bit holes: 1, sum bit holes: 2 bits */ - /* last cacheline: 16 bytes */ + /* size: 128, cachelines: 2, members: 29 */ + /* sum members: 124 */ + /* sum bitfield members: 22 bits, bit holes: 1, sum bit holes: 10 bits */ }; pre: 5:38.18 real, 213.25 user, 124.90 sys, 23449040 mem post: 5:03.34 real, 210.75 user, 88.80 sys, 20241232 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.851307606@infradead.org
2023-02-23x86: Fix FILL_RETURN_BUFFERPeter Zijlstra
With overlapping alternative validation fixed, objtool promptly complains: vmlinux.o: warning: objtool: __switch_to_asm+0x2c: stack layout conflict in alternatives: .altinstr_replacement+0x47 .rela.altinstructions: 000000000000009c 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 16dc 00000000000000a0 0000000600000002 R_X86_64_PC32 0000000000000000 .altinstr_replacement + 3a 00000000000000a8 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 16dc 00000000000000ac 0000000600000002 R_X86_64_PC32 0000000000000000 .altinstr_replacement + 66 .text: 00000000000016b0 <__switch_to_asm>: 16b0: f3 0f 1e fa endbr64 16b4: 55 push %rbp 16b5: 53 push %rbx 16b6: 41 54 push %r12 16b8: 41 55 push %r13 16ba: 41 56 push %r14 16bc: 41 57 push %r15 16be: 48 89 a7 18 0b 00 00 mov %rsp,0xb18(%rdi) 16c5: 48 8b a6 18 0b 00 00 mov 0xb18(%rsi),%rsp 16cc: 48 8b 9e 28 05 00 00 mov 0x528(%rsi),%rbx 16d3: 65 48 89 1c 25 00 00 00 00 mov %rbx,%gs:0x0 16d8: R_X86_64_32S fixed_percpu_data+0x28 16dc: eb 2a jmp 1708 <__switch_to_asm+0x58> 16de: 90 nop 16df: 90 nop 16e0: 90 nop 16e1: 90 nop 16e2: 90 nop 16e3: 90 nop 16e4: 90 nop 16e5: 90 nop 16e6: 90 nop 16e7: 90 nop 16e8: 90 nop 16e9: 90 nop 16ea: 90 nop 16eb: 90 nop 16ec: 90 nop 16ed: 90 nop 16ee: 90 nop 16ef: 90 nop 16f0: 90 nop 16f1: 90 nop 16f2: 90 nop 16f3: 90 nop 16f4: 90 nop 16f5: 90 nop 16f6: 90 nop 16f7: 90 nop 16f8: 90 nop 16f9: 90 nop 16fa: 90 nop 16fb: 90 nop 16fc: 90 nop 16fd: 90 nop 16fe: 90 nop 16ff: 90 nop 1700: 90 nop 1701: 90 nop 1702: 90 nop 1703: 90 nop 1704: 90 nop 1705: 90 nop 1706: 90 nop 1707: 90 nop 1708: 41 5f pop %r15 170a: 41 5e pop %r14 170c: 41 5d pop %r13 170e: 41 5c pop %r12 1710: 5b pop %rbx 1711: 5d pop %rbp 1712: e9 00 00 00 00 jmp 1717 <__switch_to_asm+0x67> 1713: R_X86_64_PLT32 __switch_to-0x4 .altinstr_replacement: 3a: 49 c7 c4 10 00 00 00 mov $0x10,%r12 41: e8 01 00 00 00 call 47 <.altinstr_replacement+0x47> 46: cc int3 47: e8 01 00 00 00 call 4d <.altinstr_replacement+0x4d> 4c: cc int3 4d: 48 83 c4 10 add $0x10,%rsp 51: 49 ff cc dec %r12 54: 75 eb jne 41 <.altinstr_replacement+0x41> 56: 0f ae e8 lfence 59: 65 48 c7 04 25 00 00 00 00 ff ff ff ff movq $0xffffffffffffffff,%gs:0x0 5e: R_X86_64_32S pcpu_hot+0x10 66: e8 01 00 00 00 call 6c <.altinstr_replacement+0x6c> 6b: cc int3 6c: 48 83 c4 08 add $0x8,%rsp 70: 0f ae e8 lfence As can be seen from the two alternatives, when overlaid, the NOP after the shorter (starting at 66) coinsides with the call at 47, leading to conflicting CFI state for that instruction. By offsetting the shorter alternative by 2 bytes, this alignment is undone. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.783099843@infradead.org
2023-02-23objtool: Fix overlapping alternativesPeter Zijlstra
Things like ALTERNATIVE_{2,3}() generate multiple alternatives on the same place, objtool would override the first orig_alt_group with the second (or third), failing to check the CFI among all the different variants. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.711471461@infradead.org
2023-02-23objtool: Union instruction::{call_dest,jump_table}Peter Zijlstra
The instruction call_dest and jump_table members can never be used at the same time, their usage depends on type. struct instruction { struct list_head list; /* 0 16 */ struct hlist_node hash; /* 16 16 */ struct list_head call_node; /* 32 16 */ struct section * sec; /* 48 8 */ long unsigned int offset; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ long unsigned int immediate; /* 64 8 */ unsigned int len; /* 72 4 */ u8 type; /* 76 1 */ /* Bitfield combined with previous fields */ u16 dead_end:1; /* 76: 8 2 */ u16 ignore:1; /* 76: 9 2 */ u16 ignore_alts:1; /* 76:10 2 */ u16 hint:1; /* 76:11 2 */ u16 save:1; /* 76:12 2 */ u16 restore:1; /* 76:13 2 */ u16 retpoline_safe:1; /* 76:14 2 */ u16 noendbr:1; /* 76:15 2 */ u16 entry:1; /* 78: 0 2 */ u16 visited:4; /* 78: 1 2 */ u16 no_reloc:1; /* 78: 5 2 */ /* XXX 2 bits hole, try to pack */ /* Bitfield combined with next fields */ s8 instr; /* 79 1 */ struct alt_group * alt_group; /* 80 8 */ - struct symbol * call_dest; /* 88 8 */ - struct instruction * jump_dest; /* 96 8 */ - struct instruction * first_jump_src; /* 104 8 */ - struct reloc * jump_table; /* 112 8 */ - struct alternative * alts; /* 120 8 */ + struct instruction * jump_dest; /* 88 8 */ + struct instruction * first_jump_src; /* 96 8 */ + union { + struct symbol * _call_dest; /* 104 8 */ + struct reloc * _jump_table; /* 104 8 */ + }; /* 104 8 */ + struct alternative * alts; /* 112 8 */ + struct symbol * sym; /* 120 8 */ /* --- cacheline 2 boundary (128 bytes) --- */ - struct symbol * sym; /* 128 8 */ - struct stack_op * stack_ops; /* 136 8 */ - struct cfi_state * cfi; /* 144 8 */ + struct stack_op * stack_ops; /* 128 8 */ + struct cfi_state * cfi; /* 136 8 */ - /* size: 152, cachelines: 3, members: 29 */ - /* sum members: 150 */ + /* size: 144, cachelines: 3, members: 28 */ + /* sum members: 142 */ /* sum bitfield members: 14 bits, bit holes: 1, sum bit holes: 2 bits */ - /* last cacheline: 24 bytes */ + /* last cacheline: 16 bytes */ }; pre: 5:39.35 real, 215.58 user, 123.69 sys, 23448736 mem post: 5:38.18 real, 213.25 user, 124.90 sys, 23449040 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.640914454@infradead.org
2023-02-23objtool: Remove instruction::relocPeter Zijlstra
Instead of caching the reloc for each instruction, only keep a negative cache of not having a reloc (by far the most common case). struct instruction { struct list_head list; /* 0 16 */ struct hlist_node hash; /* 16 16 */ struct list_head call_node; /* 32 16 */ struct section * sec; /* 48 8 */ long unsigned int offset; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ long unsigned int immediate; /* 64 8 */ unsigned int len; /* 72 4 */ u8 type; /* 76 1 */ /* Bitfield combined with previous fields */ u16 dead_end:1; /* 76: 8 2 */ u16 ignore:1; /* 76: 9 2 */ u16 ignore_alts:1; /* 76:10 2 */ u16 hint:1; /* 76:11 2 */ u16 save:1; /* 76:12 2 */ u16 restore:1; /* 76:13 2 */ u16 retpoline_safe:1; /* 76:14 2 */ u16 noendbr:1; /* 76:15 2 */ u16 entry:1; /* 78: 0 2 */ u16 visited:4; /* 78: 1 2 */ + u16 no_reloc:1; /* 78: 5 2 */ - /* XXX 3 bits hole, try to pack */ + /* XXX 2 bits hole, try to pack */ /* Bitfield combined with next fields */ s8 instr; /* 79 1 */ struct alt_group * alt_group; /* 80 8 */ struct symbol * call_dest; /* 88 8 */ struct instruction * jump_dest; /* 96 8 */ struct instruction * first_jump_src; /* 104 8 */ struct reloc * jump_table; /* 112 8 */ - struct reloc * reloc; /* 120 8 */ + struct alternative * alts; /* 120 8 */ /* --- cacheline 2 boundary (128 bytes) --- */ - struct alternative * alts; /* 128 8 */ - struct symbol * sym; /* 136 8 */ - struct stack_op * stack_ops; /* 144 8 */ - struct cfi_state * cfi; /* 152 8 */ + struct symbol * sym; /* 128 8 */ + struct stack_op * stack_ops; /* 136 8 */ + struct cfi_state * cfi; /* 144 8 */ - /* size: 160, cachelines: 3, members: 29 */ - /* sum members: 158 */ - /* sum bitfield members: 13 bits, bit holes: 1, sum bit holes: 3 bits */ - /* last cacheline: 32 bytes */ + /* size: 152, cachelines: 3, members: 29 */ + /* sum members: 150 */ + /* sum bitfield members: 14 bits, bit holes: 1, sum bit holes: 2 bits */ + /* last cacheline: 24 bytes */ }; pre: 5:48.89 real, 220.96 user, 127.55 sys, 24834672 mem post: 5:39.35 real, 215.58 user, 123.69 sys, 23448736 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.572145269@infradead.org
2023-02-23objtool: Shrink instruction::{type,visited}Peter Zijlstra
Since we don't have that many types in enum insn_type, force it into a u8 and re-arrange member to get rid of the holes, saves another 8 bytes. struct instruction { struct list_head list; /* 0 16 */ struct hlist_node hash; /* 16 16 */ struct list_head call_node; /* 32 16 */ struct section * sec; /* 48 8 */ long unsigned int offset; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ - unsigned int len; /* 64 4 */ - enum insn_type type; /* 68 4 */ - long unsigned int immediate; /* 72 8 */ - u16 dead_end:1; /* 80: 0 2 */ - u16 ignore:1; /* 80: 1 2 */ - u16 ignore_alts:1; /* 80: 2 2 */ - u16 hint:1; /* 80: 3 2 */ - u16 save:1; /* 80: 4 2 */ - u16 restore:1; /* 80: 5 2 */ - u16 retpoline_safe:1; /* 80: 6 2 */ - u16 noendbr:1; /* 80: 7 2 */ - u16 entry:1; /* 80: 8 2 */ + long unsigned int immediate; /* 64 8 */ + unsigned int len; /* 72 4 */ + u8 type; /* 76 1 */ - /* XXX 7 bits hole, try to pack */ + /* Bitfield combined with previous fields */ - s8 instr; /* 82 1 */ - u8 visited; /* 83 1 */ + u16 dead_end:1; /* 76: 8 2 */ + u16 ignore:1; /* 76: 9 2 */ + u16 ignore_alts:1; /* 76:10 2 */ + u16 hint:1; /* 76:11 2 */ + u16 save:1; /* 76:12 2 */ + u16 restore:1; /* 76:13 2 */ + u16 retpoline_safe:1; /* 76:14 2 */ + u16 noendbr:1; /* 76:15 2 */ + u16 entry:1; /* 78: 0 2 */ + u16 visited:4; /* 78: 1 2 */ - /* XXX 4 bytes hole, try to pack */ + /* XXX 3 bits hole, try to pack */ + /* Bitfield combined with next fields */ - struct alt_group * alt_group; /* 88 8 */ - struct symbol * call_dest; /* 96 8 */ - struct instruction * jump_dest; /* 104 8 */ - struct instruction * first_jump_src; /* 112 8 */ - struct reloc * jump_table; /* 120 8 */ + s8 instr; /* 79 1 */ + struct alt_group * alt_group; /* 80 8 */ + struct symbol * call_dest; /* 88 8 */ + struct instruction * jump_dest; /* 96 8 */ + struct instruction * first_jump_src; /* 104 8 */ + struct reloc * jump_table; /* 112 8 */ + struct reloc * reloc; /* 120 8 */ /* --- cacheline 2 boundary (128 bytes) --- */ - struct reloc * reloc; /* 128 8 */ - struct alternative * alts; /* 136 8 */ - struct symbol * sym; /* 144 8 */ - struct stack_op * stack_ops; /* 152 8 */ - struct cfi_state * cfi; /* 160 8 */ + struct alternative * alts; /* 128 8 */ + struct symbol * sym; /* 136 8 */ + struct stack_op * stack_ops; /* 144 8 */ + struct cfi_state * cfi; /* 152 8 */ - /* size: 168, cachelines: 3, members: 29 */ - /* sum members: 162, holes: 1, sum holes: 4 */ - /* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 7 bits */ - /* last cacheline: 40 bytes */ + /* size: 160, cachelines: 3, members: 29 */ + /* sum members: 158 */ + /* sum bitfield members: 13 bits, bit holes: 1, sum bit holes: 3 bits */ + /* last cacheline: 32 bytes */ }; pre: 5:48.86 real, 220.30 user, 128.34 sys, 24834672 mem post: 5:48.89 real, 220.96 user, 127.55 sys, 24834672 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.501847188@infradead.org
2023-02-23objtool: Make instruction::alts a single-linked listPeter Zijlstra
struct instruction { struct list_head list; /* 0 16 */ struct hlist_node hash; /* 16 16 */ struct list_head call_node; /* 32 16 */ struct section * sec; /* 48 8 */ long unsigned int offset; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ unsigned int len; /* 64 4 */ enum insn_type type; /* 68 4 */ long unsigned int immediate; /* 72 8 */ u16 dead_end:1; /* 80: 0 2 */ u16 ignore:1; /* 80: 1 2 */ u16 ignore_alts:1; /* 80: 2 2 */ u16 hint:1; /* 80: 3 2 */ u16 save:1; /* 80: 4 2 */ u16 restore:1; /* 80: 5 2 */ u16 retpoline_safe:1; /* 80: 6 2 */ u16 noendbr:1; /* 80: 7 2 */ u16 entry:1; /* 80: 8 2 */ /* XXX 7 bits hole, try to pack */ s8 instr; /* 82 1 */ u8 visited; /* 83 1 */ /* XXX 4 bytes hole, try to pack */ struct alt_group * alt_group; /* 88 8 */ struct symbol * call_dest; /* 96 8 */ struct instruction * jump_dest; /* 104 8 */ struct instruction * first_jump_src; /* 112 8 */ struct reloc * jump_table; /* 120 8 */ /* --- cacheline 2 boundary (128 bytes) --- */ struct reloc * reloc; /* 128 8 */ - struct list_head alts; /* 136 16 */ - struct symbol * sym; /* 152 8 */ - struct stack_op * stack_ops; /* 160 8 */ - struct cfi_state * cfi; /* 168 8 */ + struct alternative * alts; /* 136 8 */ + struct symbol * sym; /* 144 8 */ + struct stack_op * stack_ops; /* 152 8 */ + struct cfi_state * cfi; /* 160 8 */ - /* size: 176, cachelines: 3, members: 29 */ - /* sum members: 170, holes: 1, sum holes: 4 */ + /* size: 168, cachelines: 3, members: 29 */ + /* sum members: 162, holes: 1, sum holes: 4 */ /* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 7 bits */ - /* last cacheline: 48 bytes */ + /* last cacheline: 40 bytes */ }; pre: 5:58.50 real, 229.64 user, 128.65 sys, 26221520 mem post: 5:48.86 real, 220.30 user, 128.34 sys, 24834672 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.430556498@infradead.org
2023-02-23objtool: Make instruction::stack_ops a single-linked listPeter Zijlstra
struct instruction { struct list_head list; /* 0 16 */ struct hlist_node hash; /* 16 16 */ struct list_head call_node; /* 32 16 */ struct section * sec; /* 48 8 */ long unsigned int offset; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ unsigned int len; /* 64 4 */ enum insn_type type; /* 68 4 */ long unsigned int immediate; /* 72 8 */ u16 dead_end:1; /* 80: 0 2 */ u16 ignore:1; /* 80: 1 2 */ u16 ignore_alts:1; /* 80: 2 2 */ u16 hint:1; /* 80: 3 2 */ u16 save:1; /* 80: 4 2 */ u16 restore:1; /* 80: 5 2 */ u16 retpoline_safe:1; /* 80: 6 2 */ u16 noendbr:1; /* 80: 7 2 */ u16 entry:1; /* 80: 8 2 */ /* XXX 7 bits hole, try to pack */ s8 instr; /* 82 1 */ u8 visited; /* 83 1 */ /* XXX 4 bytes hole, try to pack */ struct alt_group * alt_group; /* 88 8 */ struct symbol * call_dest; /* 96 8 */ struct instruction * jump_dest; /* 104 8 */ struct instruction * first_jump_src; /* 112 8 */ struct reloc * jump_table; /* 120 8 */ /* --- cacheline 2 boundary (128 bytes) --- */ struct reloc * reloc; /* 128 8 */ struct list_head alts; /* 136 16 */ struct symbol * sym; /* 152 8 */ - struct list_head stack_ops; /* 160 16 */ - struct cfi_state * cfi; /* 176 8 */ + struct stack_op * stack_ops; /* 160 8 */ + struct cfi_state * cfi; /* 168 8 */ - /* size: 184, cachelines: 3, members: 29 */ - /* sum members: 178, holes: 1, sum holes: 4 */ + /* size: 176, cachelines: 3, members: 29 */ + /* sum members: 170, holes: 1, sum holes: 4 */ /* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 7 bits */ - /* last cacheline: 56 bytes */ + /* last cacheline: 48 bytes */ }; pre: 5:58.22 real, 226.69 user, 131.22 sys, 26221520 mem post: 5:58.50 real, 229.64 user, 128.65 sys, 26221520 mem Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.362196959@infradead.org
2023-02-23objtool: Change arch_decode_instruction() signaturePeter Zijlstra
In preparation to changing struct instruction around a bit, avoid passing it's members by pointer and instead pass the whole thing. A cleanup in it's own right too. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build only Tested-by: Thomas Weißschuh <linux@weissschuh.net> # compile and run Link: https://lore.kernel.org/r/20230208172245.291087549@infradead.org
2023-02-23Merge branch 'linus' into objtool/core, to pick up Xen dependenciesIngo Molnar
Pick up dependencies - freshly merged upstream via xen-next - before applying dependent objtool changes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2023-02-23drm/i915: move a Kconfig symbol to unbreak the menu presentationRandy Dunlap
Inserting a Kconfig symbol that does not have a dependency (DRM_I915_GVT) into a list of other symbols that do have a dependency (on DRM_I915) breaks the driver menu presentation in 'make *config'. Relocate the DRM_I915_GVT symbol so that it does not cause this problem. Fixes: 8b750bf74418 ("drm/i915/gvt: move the gvt code into kvmgt.ko") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: intel-gvt-dev@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230215044533.4847-1-rdunlap@infradead.org
2023-02-23i915/gvt: Fix spelling mistake "vender" -> "vendor"Colin Ian King
There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230202125018.285523-1-colin.i.king@gmail.com
2023-02-23i915: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gvt-dev@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230202141309.2293834-1-gregkh@linuxfoundation.org
2023-02-23drm/i915/gvt: Remove extra semicolonDeepak R Varma
Remove the extra semicolon at end. Issue identified using semicolon.cocci Coccinelle semantic patch. Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/Y8LNbzgTf/1kYJX/@ubun2204.myguest.virtualbox.org Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 18:07:45 +0000