summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-14spi: bcm-qspi: Fix bcm_qspi_bspi_read() performanceKamal Dasu
Let bcm_qspi_bspi_flash_read() return all the requested bytes by breaking up the reads for BSPI block into optimal chunks size that a BSPI block can handle. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14tpm xen: drop unneeded chip variableJulia Lawall
The call that used chip was dropped in 1f0f30e404b3. Drop the leftover declaration and initialization. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm: fix misspelled "facilitate" in module parameter descriptionDmitry Torokhov
I typoed "facilitate" as "faciltate" a few years back... Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm_tis: fix the error handling of init_tis()Wei Yongjun
Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Cc: stable@vger.kernel.org Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14net: fec: fix multicast filtering hardware setupRui Sousa
Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14Merge branch 'ipv6-v4mapped'David S. Miller
Jonathan T. Leighton says: ==================== IPv4-mapped on wire, :: dst address issue Under some circumstances IPv6 datagrams are sent with IPv4-mapped IPv6 addresses as the source. Given an IPv6 socket bound to an IPv4-mapped IPv6 address, and an IPv6 destination address, both TCP and UDP will will send packets using the IPv4-mapped IPv6 address as the source. Per RFC 6890 (Table 20), IPv4-mapped IPv6 source addresses are not allowed in an IP datagram. The problem can be observed by attempting to connect() either a TCP or UDP socket, or by using sendmsg() with a UDP socket. The patch is intended to correct this issue for all socket types. linux follows the BSD convention that an IPv6 destination address specified as in6addr_any is converted to the loopback address. Currently, neither TCP nor UDP consider the possibility that the source address is an IPv4-mapped IPv6 address, and assume that the appropriate loopback address is ::1. The patch adds a check on whether or not the source address is an IPv4-mapped IPv6 address and then sets the destination address to either ::ffff:127.0.0.1 or ::1, as appropriate. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Handle IPv4-mapped src to in6addr_any dst.Jonathan T. Leighton
This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ipv6: Inhibit IPv4-mapped src address on the wire.Jonathan T. Leighton
This patch adds a check for the problematic case of an IPv4-mapped IPv6 source address and a destination address that is neither an IPv4-mapped IPv6 address nor in6addr_any, and returns an appropriate error. The check in done before returning from looking up the route. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14spi: lantiq-ssc: add support for Lantiq SSC SPI controllerHauke Mehrtens
This driver supports the Lantiq SSC SPI controller in master mode. This controller is found on Intel (former Lantiq) SoCs like the Danube, Falcon, xRX200, xRX300. The hardware uses two hardware FIFOs one for received and one for transferred bytes. When the driver writes data into the transmit FIFO the complete word is taken from the FIFO into a shift register. The data from this shift register is then written to the wire. This driver uses the interrupts signaling the status of the FIFOs and not the shift register. It is also possible to use the interrupts for the shift register, but they will send a signal after every word. When using the interrupts for the shift register we get a signal when the last word is written into the shift register and not when it is written to the wire. After all FIFOs are empty the driver busy waits till the hardware is not busy any more and returns the transfer status. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-14net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz
When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ext4: don't BUG when truncating encrypted inodes on the orphan listTheodore Ts'o
Fix a BUG when the kernel tries to mount a file system constructed as follows: echo foo > foo.txt mke2fs -Fq -t ext4 -O encrypt foo.img 100 debugfs -w foo.img << EOF write foo.txt a set_inode_field a i_flags 0x80800 set_super_value s_last_orphan 12 quit EOF root@kvm-xfstests:~# mount -o loop foo.img /mnt [ 160.238770] ------------[ cut here ]------------ [ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874! [ 160.240106] invalid opcode: 0000 [#1] SMP [ 160.240106] Modules linked in: [ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227 [ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 160.240106] task: f4518000 task.stack: f47b6000 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 [ 160.240106] EFLAGS: 00010246 CPU: 0 [ 160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007 [ 160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac [ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0 [ 160.240106] Call Trace: [ 160.240106] ext4_truncate+0x1e9/0x3e5 [ 160.240106] ext4_fill_super+0x286f/0x2b1e [ 160.240106] ? set_blocksize+0x2e/0x7e [ 160.240106] mount_bdev+0x114/0x15f [ 160.240106] ext4_mount+0x15/0x17 [ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d [ 160.240106] mount_fs+0x58/0x115 [ 160.240106] vfs_kern_mount+0x4b/0xae [ 160.240106] do_mount+0x671/0x8c3 [ 160.240106] ? _copy_from_user+0x70/0x83 [ 160.240106] ? strndup_user+0x31/0x46 [ 160.240106] SyS_mount+0x57/0x7b [ 160.240106] do_int80_syscall_32+0x4f/0x61 [ 160.240106] entry_INT80_32+0x2f/0x2f [ 160.240106] EIP: 0xb76b919e [ 160.240106] EFLAGS: 00000246 CPU: 0 [ 160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8 [ 160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660 [ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac [ 160.317241] ---[ end trace d6a773a375c810a5 ]--- The problem is that when the kernel tries to truncate an inode in ext4_truncate(), it tries to clear any on-disk data beyond i_size. Without the encryption key, it can't do that, and so it triggers a BUG. E2fsck does *not* provide this service, and in practice most file systems have their orphan list processed by e2fsck, so to avoid crashing, this patch skips this step if we don't have access to the encryption key (which is the case when processing the orphan list; in all other cases, we will have the encryption key, or the kernel wouldn't have allowed the file to be opened). An open question is whether the fact that e2fsck isn't clearing the bytes beyond i_size causing problems --- and if we've lived with it not doing it for so long, can we drop this from the kernel replay of the orphan list in all cases (not just when we don't have the key for encrypted inodes). Addresses-Google-Bug: #35209576 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-14cdrom: Make device operations read-onlyKees Cook
Since function tables are a common target for attackers, it's best to keep them in read-only memory. As such, this makes the CDROM device ops tables const. This drops additionally n_minors, since it isn't used meaningfully, and sets the only user of cdrom_dummy_generic_packet explicitly so the variables can all be const. Inspired by similar changes in grsecurity/PaX. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14elevator: fix loading wrong elevator type for blk-mq devicesJens Axboe
The old elevator= boot parameter blindly attempts to load the same scheduler for mq and !mq devices, leading to a crash if we specify the wrong one. Ensure that we only apply this boot parameter to old !mq devices. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14HID: intel-ish-hid: constify device_type structureBhumika Goyal
Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to the declaration of device_type structure. File size before: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4260 336 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o File size after: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4324 272 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14Merge tag 'media/v4.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A colorspace regression fix in V4L2 core and a CEC core bug that makes it discard valid messages" * tag 'media/v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: initiator should be the same as the destination for, poll [media] videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGB
2017-02-14HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/rangeJason Gerecke
The prox/range bits included in the Bluetooth reports from the Intuos Pro were being ignored, leading to two issues. Firstly, the pen would never announce a BTN_TOOL_PEN event with value 0, leaving userspace to believe the pen was always active. Secondly, the driver would continue to send events for data while the packet's "prox" bit was clear. This can lead to sudden incorrect pointer jumps if the pen is slowly moved away from the tablet surface. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14tools: Set the maximum optimization level according to the compiler being usedArnaldo Carvalho de Melo
To avoid this when using clang: warning: optimization level '-O6' is not supported; using '-O3' instead Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-kaghp8ddvzdsg03putemcq96@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14tools: Suppress request for warning options not existent in clangArnaldo Carvalho de Melo
To allow building with clang, avoiding: error: unknown warning option '-Wstrict-aliasing=3'; did you mean '-Wstring-plus-int'? [-Werror,-Wunknown-warning-option] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-xvthlvmhzfnt7jx73jgmaea1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14EDAC, amd64: Bump driver versionBorislav Petkov
Last time we did that was when we enabled Bulldozer. Now, we enabled Zen so it is only natural ... :-) Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
2017-02-14MIPS: sysmips: Remove duplicated include from syscall.cWei Yongjun
Remove duplicated include. Fixes: 7c0f6ba682b9 ("Replace <asm/uaccess.h> with <linux/uaccess.h> globally") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15213/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14Kbuild: Add cpp_its_S in ksym_dep_filterMarcin Nowakowski
Add a new command cpp_its_S introduced in commit cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") to ksym_dep_filter handler - otherwise a warning is produced during the build of MIPS platforms (when vmlinux.*.itb target is chosen). Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Michal Marek <mmarek@suse.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15278/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14MIPS: Audit and remove any unnecessary uses of module.hPaul Gortmaker
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14MIPS: Unify perf counter register definitionsJames Hogan
Unify definitions for MIPS performance counter register fields in mipsregs.h rather than duplicating them in perf_events and oprofile. This will allow future patches to use them to expose performance counters to KVM guests. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Robert Richter <rric@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/15212/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14MIPS: Disable stack checks on MIPS kernelsJoshua Kinard
Disable stack checking on MIPS kernels. Some distribution toolchains might pass the -fstack-check option to gcc. This results in a store-doubleword instruction being emitted at the top of all functions that checks the available stack space. E.g., a80000000001d740 <per_cpu_init>: a80000000001d740: ffa0bfc0 sd zero,-16448(sp) a80000000001d744: 2405ffc9 li a1,-55 a80000000001d748: 67bdffc0 daddiu sp,sp,-64 Generally, this is undesirable, and especially on the SGI IP27 platform, it will trigger a NULL pointer dereference in '_raw_spin_lock_irq' during early init. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Suggested-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15132/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14MIPS: OCTEON: Platform support for OCTEON III USB controllerSteven J. Hill
Add all the necessary platform code to initialize the dwc3 USB host controller. This code initializes the clocks and performs a reset on the USB core and PHYs. The driver code in 'drivers/usb/dwc3' is where the real driver lives. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15108/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14math64, tile: Fix build failureSudip Mukherjee
The build of tilegx allmodconfig fails with: ../arch/tile/include/asm/div64.h:5:15: error: unknown type name 'u64' static inline u64 mul_u32_u32(u32 a, u32 b) ^~~ ../arch/tile/include/asm/div64.h:5:31: error: unknown type name 'u32' static inline u64 mul_u32_u32(u32 a, u32 b) ^~~ ../arch/tile/include/asm/div64.h:5:38: error: unknown type name 'u32' static inline u64 mul_u32_u32(u32 a, u32 b) ^~~ In file included from ../fs/ubifs/ubifs.h:26:0, from ../fs/ubifs/shrinker.c:42: ../include/linux/math64.h: In function 'mul_u64_u32_shr': ../arch/tile/include/asm/div64.h:9:21: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration] Include the linux/types.h in tiles div64.h to slve the problem. Fixes: 9e3d6223d209 ("math64, timers: Fix 32bit mul_u64_u32_shr() and friends") Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: http://lkml.kernel.org/r/1485275961-20112-1-git-send-email-sudip.mukherjee@codethink.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-14Merge branch 'fixes' into nextUlf Hansson
2017-02-14mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS supportUri Yanai
Adding dedicated flag for AUTO_BKOPS in card->ext_csd structure. Read AUTO_BKOPS bit value from the device EXT_CSD and set to the card->ext_csd structure. In mmc_decode_ext_csd() add a print message in case the AUTO_BKOPS is enabled Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: MAN_BKOPS_EN inverse debug message logicUri Yanai
Inverse the logic for printing the debug message. In mmc_decode_ext_csd() print message when MAN_BKOPS_EN is set Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Alex Lemberg <alex.lemberg@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: add support for HS400 modeHeiner Kallweit
Add support for HS400 mode. The driver still misses support for tuning, therefore highspeed modes like HS400 might not work under all circumstances yet. Successfully tested on a Odroid C2 (S905 GXBB). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: remove unneeded checks in removeHeiner Kallweit
The remove callback is called only if probe finished successfully. Therefore these checks are not needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: reduce bounce buffer sizeHeiner Kallweit
A bounce buffer of 512K isn't needed as the max request size is 511 * 512 byte. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: set max block count and request sizeHeiner Kallweit
So far max_blk_count isn't set what results in a default of value 8 to be used (PAGE_SIZE / block size). Block length field has 9 bits, so set max_blk_count to 2^9-1 = 511. In addition set max_req_size because max_blk_count is also limited by max_req_size / block_size. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve interrupt handlingHeiner Kallweit
Disabling and immediately re-enabling interrupts in meson_mmc_request doesn't provide a benefit. Instead enable interrupts in probe already. And disable interrupts in remove, this was missing so far. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_irq_threadHeiner Kallweit
Remove unneeded variable ret and simplify the if block. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: improve meson_mmc_clk_setHeiner Kallweit
The following changes are quite small, therefore I combined them in one patch. - ret doesn't need to be initialized with 0 - use standard !clk_rate notation to check for a zero value - If clk_rate is zero we return here. Therefore all further checks in this function for clk_rate != 0 are not needed. - switch from dev_warn to dev_err if the clock can't be set - If due to clock source and available divider values the requested frequency isn't matched exactly (always the case if requested frequency is 52 MHz), then just print the differing values as debug message and not as warning. - Also remove ret from the message as it is always 0. - Set member current_clock to the current requested rate and mmc->actual_clock to the current actual rate Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson-gx: minor improvements in meson_mmc_set_iosHeiner Kallweit
val isn't used in the switch clause and afterwards there's an identical statement. So remove it. In case of an unexpected bus width the error message indicates the intention to set the bus width to 4 and to go on. So remove the return statement. This return statement also conflicts with "setting to 4" because nothing would be set actually before returning. 4bit bus width are chosen as default as the vendor driver does it too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: meson: Assign the minimum clk rate as close to 400KHz as possibleUlf Hansson
The current code dealing with calculating mmc->f_min is a bit complicated. Additionally, the attempt to set an initial clock rate should explicitly use a rate between 100KHz to 400 KHz, according the (e)MMC/SD specs, which it doesn't. Fix the problem and clean up the code by using clk_round_rate() to pick the nearest minimum rate to 400KHz (rounded down from 400kHz). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Heiner: Changed from 100KHz to 400KHz to get a proper rounded rate] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-02-14mmc: core: start to break apart mmc_start_areq()Linus Walleij
This function is doing to many clever things at the same time under too many various conditions. Start to make things clearer by refactoring: break out the finalization of the previous asynchronous request to its own function mmc_finalize_areq(). We can get rid of the default assignment of status and let the call deal with this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: respect bool returned from blk_end_request()Linus Walleij
The return value from blk_end_request() is a bool but is treated like an int. This is generally safe, but the variable also has the opaque name "ret" and gets returned from the helper function mmc_blk_cmd_err(). - Switch the variable to a bool, applies everywhere. - Return a bool from mmc_blk_cmd_err() and rename the function mmc_blk_rw_cmd_err() to indicate through the namespace that this is a helper for mmc_blk_issue_rw_rq(). - Rename the variable from "ret" to "req_pending" inside the while() loop inside mmc_blk_issue_rq_rq(), which finally makes it very clear what this while loop is waiting for. - Augment the argument "ret" to mmc_blk_rq_cmd_err() to old_req_pending so it becomes evident that this is an older state, and it is returned only if we fail to get the number of written blocks from an SD card in the function mmc_sd_num_wr_blocks(). - Augment the while() loop in mmc_blk_rq_cmd_abort(): it is evident now that we know this is a bool variable, that the function is just spinning waiting for blk_end_request() to return false. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14mmc: block: return errorcode from mmc_sd_num_wr_blocks()Linus Walleij
mmc_sd_num_wr_blocks() has an interesting construction that saves one return argument by casting (u32)-1 as error code if something goes wrong. This is however a bit confusing when the normal kernel pattern is to return an int error code on success. So instead pass a variable "blocks" that the function can fill in with the number of successfully transferred blocks and return an integer as error code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Ulf: Changed a return code to -EIO, reported by Dan Carpenter and fixed by Linus Walleij]
2017-02-14mmc: core: fix multi-bit bus width without high-speed modeAnssi Hannula
Commit 577fb13199b1 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-14Merge tag 'perf-core-for-mingo-4.11-20170213' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Introduce the 'delta-abs' 'perf diff' compute method, that orders the histogram entries by the absolute value of the percentage delta for a function in two perf.data files, i.e. the functions that changed the most (increase or decrease in samples) comes first (Namhyung Kim) User visible changes: - Improve message about tweaking the kernel.perf_event_paranoid setting, telling how to make the change permanent by editing /etc/sysctl.conf (Arnaldo Carvalho de Melo) Infrastructure changes: - Introduce linux/compiler-gcc.h as a counterpart to the kernel's, initially containing the definition of __fallthrough, more to come (__maybe_unused, etc) (Arnaldo Carvalho de Melo) - Fixes for problems uncovered by building tools/perf with clang, such as always true tests of arrays against NULL and variables that sometimes were used without being initialized (Arnaldo Carvalho de Melo, Steven Rostedt) - Before loading a new ELF, clear global variables set by the samples/bpf loader (Mickaël Salaün) - Ignore already processed ELF sections in the samples/bpf loader (Mickaël Salaün) - Fix compile error in the scripting code with some perl5 versions (Wang YanQing) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-14Merge tag 'v4.10-rc8' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-13Merge branch 'rhashtable-allocation-failure-during-insertion'David S. Miller
Herbert Xu says: ==================== rhashtable: Handle table allocation failure during insertion v2 - Added Ack to patch 2. Fixed RCU annotation in code path executed by rehasher by using rht_dereference_bucket. v1 - This series tackles the problem of table allocation failures during insertion. The issue is that we cannot vmalloc during insertion. This series deals with this by introducing nested tables. The first two patches removes manual hash table walks which cannot work on a nested table. The final patch introduces nested tables. I've tested this with test_rhashtable and it appears to work. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13rhashtable: Add nested tablesHerbert Xu
This patch adds code that handles GFP_ATOMIC kmalloc failure on insertion. As we cannot use vmalloc, we solve it by making our hash table nested. That is, we allocate single pages at each level and reach our desired table size by nesting them. When a nested table is created, only a single page is allocated at the top-level. Lower levels are allocated on demand during insertion. Therefore for each insertion to succeed, only two (non-consecutive) pages are needed. After a nested table is created, a rehash will be scheduled in order to switch to a vmalloced table as soon as possible. Also, the rehash code will never rehash into a nested table. If we detect a nested table during a rehash, the rehash will be aborted and a new rehash will be scheduled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13tipc: Fix tipc_sk_reinit race conditionsHerbert Xu
There are two problems with the function tipc_sk_reinit. Firstly it's doing a manual walk over an rhashtable. This is broken as an rhashtable can be resized and if you manually walk over it during a resize then you may miss entries. Secondly it's missing memory barriers as previously the code used spinlocks which provide the barriers implicitly. This patch fixes both problems. Fixes: 07f6c4bc048a ("tipc: convert tipc reference table to...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13gfs2: Use rhashtable walk interface in glock_hash_walkHerbert Xu
The function glock_hash_walk walks the rhashtable by hand. This is broken because if it catches the hash table in the middle of a rehash, then it will miss entries. This patch replaces the manual walk by using the rhashtable walk interface. Fixes: 88ffbf3e037e ("GFS2: Use resizable hash table for glocks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13NET: Fix /proc/net/arp for AX.25Ralf Baechle
When sending ARP requests over AX.25 links the hwaddress in the neighbour cache are not getting initialized. For such an incomplete arp entry ax2asc2 will generate an empty string resulting in /proc/net/arp output like the following: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 172.20.1.99 0x3 0x0 * bpq0 The missing field will confuse the procfs parsing of arp(8) resulting in incorrect output for the device such as the following: $ arp Address HWtype HWaddress Flags Mask Iface gateway ether 52:54:00:00:5d:5f C ens3 172.20.1.99 (incomplete) ens3 This changes the content of /proc/net/arp to: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 172.20.1.99 0x3 0x0 * * bpq0 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 To do so it change ax2asc to put the string "*" in buf for a NULL address argument. Finally the HW address field is left aligned in a 17 character field (the length of an ethernet HW address in the usual hex notation) for readability. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13xen-netback: vif counters from int/long to u64Mart van Santen
This patch fixes an issue where the type of counters in the queue(s) and interface are not in sync (queue counters are int, interface counters are long), causing incorrect reporting of tx/rx values of the vif interface and unclear counter overflows. This patch sets both counters to the u64 type. Signed-off-by: Mart van Santen <mart@greenhost.nl> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 10:52:32 +0000