summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-07clocksource/drivers/ostm: Add renesas-ostm timer driverChris Brandt
This patch adds a OSTM driver for the Renesas architecture. The OS Timer (OSTM) has independent channels that can be used as a freerun or interval times. This driver uses the first probed device as a clocksource and then any additional devices as clock events. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource/drivers/ostm: Document renesas-ostm timer DT bindingsChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clockDavid Engraf
On newer boards the TC can be read as single 32 bit value without locking. Thus the clock can be used as reference for sched_clock which is much more accurate than the jiffies implementation. Tested on a Atmel SAMA5D2 board. Signed-off-by: David Engraf <david.engraf@sysgo.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource/drivers/gemini: Add driver for the Cortina GeminiLinus Walleij
This is a rewrite of the Gemini timer driver in arch/arm/mach-gemini/timer.c trying to do everything the device tree way: - Make every IO-access relative to a base address and dynamic so we can do a dynamic ioremap and get going. - Do not poke around directly in the global syscon registers, access them using the syscon regmap style design pattern for the one register we need to check. - Find register range and interrupt from the device tree. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource: add DT bindings for Cortina GeminiLinus Walleij
This adds device tree bindings for the Cortina Systems Gemini timer block used in these SoCs. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clockevents: Add a clkevt-of mechanism like clksrc-ofDaniel Lezcano
The current code uses the CLOCKSOURCE_OF_DECLARE macro to fill the clksrc table with a t-uple (name, init_function). Unfortunately it ends up to the clockevent and the clocksource being both initialized with this macro. It is not a problem by itself but there is not a clear distinction between a clockevent and a clocksource in the code initialization path. Somebody can argue there are the same IP block and the same DT node. But conceptually from the software side, there are two distincts entities and as is they should be initialized separetely. Some drivers which do not have a clocksource end up by using the CLOCKSOURCE_OF_DECLARE macro to declare a clockevent. Another result is the fuzzy organization in the clocksource directory, where the clockevents are implemented in the same file than the clocksources or file labelled timer-something implementing a clocksource. This patch provides another macro to specifically declare a clockevent in the same way than the clocksource and gives the opportunity to write two separate drivers, one for the clocksource and another for the clockevents. Hopefully, that can help to do some housework in the directory, perhaps split the drivers in to entities, for example: - clksrc-rockchip.c - clkevt-rockchip.c Also, it gives the possibility to declare clocksources separately in the DT and then use a clocksource from IP block while while clockevents are used from another IP block. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07sctp: check af before verify address in sctp_addr_id2transportXin Long
Commit 6f29a1306131 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") invoked sctp_verify_addr to verify the addr. But it didn't check af variable beforehand, once users pass an address with family = 0 through sockopt, sctp_get_af_specific will return NULL and NULL pointer dereference will be caused by af->sockaddr_len. This patch is to fix it by returning NULL if af variable is NULL. Fixes: 6f29a1306131 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07vfio/spapr_tce: Set window when adding additional groups to containerAlexey Kardashevskiy
If a container already has a group attached, attaching a new group should just program already created IOMMU tables to the hardware via the iommu_table_group_ops::set_window() callback. However commit 6f01cc692a16 ("vfio/spapr: Add a helper to create default DMA window") did not just simplify the code but also removed the set_window() calls in the case of attaching groups to a container which already has tables so it broke VFIO PCI hotplug. This reverts set_window() bits in tce_iommu_take_ownership_ddw(). Fixes: 6f01cc692a16 ("vfio/spapr: Add a helper to create default DMA window") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-07ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixupVineet Gupta
Reported-by: Jo-Philipp Wich <jo@mein.io> Fixes: 9aed02feae57bf7 ("ARC: [arcompact] handle unaligned access delay slot") Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-07sctp: avoid BUG_ON on sctp_wait_for_sndbufMarcelo Ricardo Leitner
Alexander Popov reported that an application may trigger a BUG_ON in sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is waiting on it to queue more data and meanwhile another thread peels off the association being used by the first thread. This patch replaces the BUG_ON call with a proper error handling. It will return -EPIPE to the original sendmsg call, similarly to what would have been done if the association wasn't found in the first place. Acked-by: Alexander Popov <alex.popov@linux.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07mlx4: Invoke softirqs after napi_rescheduleBenjamin Poirier
mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07udp: properly cope with csum errorsEric Dumazet
Dmitry reported that UDP sockets being destroyed would trigger the WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct() It turns out we do not properly destroy skb(s) that have wrong UDP checksum. Thanks again to syzkaller team. Fixes : 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Merge branch 'net-Fix-on-stack-USB-buffers'David S. Miller
Ben Hutchings says: ==================== net: Fix on-stack USB buffers Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). This series fixes all the instances I could find where USB networking drivers do that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07catc: Use heap buffer for memory size testBen Hutchings
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07catc: Combine failure cleanup code in catc_probe()Ben Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07rtl8150: Use heap buffers for all register accessBen Hutchings
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07pegasus: Use heap buffers for all register accessBen Hutchings
Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556 Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07xen/pvh: Use Xen's emergency_restart op for PVH guestsBoris Ostrovsky
Using native_machine_emergency_restart (called during reboot) will lead PVH guests to machine_real_restart() where we try to use real_mode_header which is not initialized. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: Enable CPU hotplugBoris Ostrovsky
PVH guests don't (yet) receive ACPI hotplug interrupts and therefore need to monitor xenstore for CPU hotplug event. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: PVH guests always have PV devicesBoris Ostrovsky
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07xen/pvh: Initialize grant table for PVH guestsBoris Ostrovsky
Like PV guests, PVH does not have PCI devices and therefore cannot use MMIO space to store grants. Instead it balloons out memory and keeps grants there. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCIBoris Ostrovsky
Since we are not using PIC and (at least currently) don't have IOAPIC we want to make sure that acpi_irq_model doesn't stay set to ACPI_IRQ_MODEL_PIC (which is the default value). If we allowed it to stay then acpi_os_install_interrupt_handler() would try (and fail) to request_irq() for PIC. Instead we set the model to ACPI_IRQ_MODEL_PLATFORM which will prevent this from happening. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: Bootstrap PVH guestBoris Ostrovsky
Start PVH guest at XEN_ELFNOTE_PHYS32_ENTRY address. Setup hypercall page, initialize boot_params, enable early page tables. Since this stub is executed before kernel entry point we cannot use variables in .bss which is cleared by kernel. We explicitly place variables that are initialized here into .data. While adjusting xen_hvm_init_shared_info() make it use cpuid_e?x() instead of cpuid() (wherever possible). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: Import PVH-related Xen public interfacesBoris Ostrovsky
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07xen/x86: Remove PVH supportBoris Ostrovsky
We are replacing existing PVH guests with new implementation. We are keeping xen_pvh_domain() macro (for now set to zero) because when we introduce new PVH implementation later in this series we will reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that code is conditioned by 'if (xen_pvh_domain())'. (We will also need a noop xen_pvh_domain() for !CONFIG_XEN_PVH). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07x86/boot/32: Convert the 32-bit pgtable setup code from assembly to CBoris Ostrovsky
The new Xen PVH entry point requires page tables to be setup by the kernel since it is entered with paging disabled. Pull the common code out of head_32.S so that mk_early_pgtbl_32() can be invoked from both the new Xen entry point and the existing startup_32() code. Convert resulting common code to C. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: matt@codeblueprint.co.uk Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1481215471-9639-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07PM / OPP: Make _find_opp_table_unlocked() staticWei Yongjun
Fixes the following sparse warning: drivers/base/power/opp/core.c:49:18: warning: symbol '_find_opp_table_unlocked' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplugVitaly Kuznetsov
We may or may not have all possible CPUs in MADT on boot but in any case we're overwriting x86_cpu_to_acpiid mapping with U32_MAX when acpi_register_lapic() is called again on the CPU hotplug path: acpi_processor_hotadd_init() -> acpi_map_cpu() -> acpi_register_lapic() As we have the required acpi_id information in acpi_processor_hotadd_init() propagate it to acpi_map_cpu() to always keep x86_cpu_to_acpiid mapping valid. Reported-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07spi: acpi: Initialize modalias from of_compatibleDan O'Donovan
When using devicetree spi_device.modalias is set to the compatible string with the vendor prefix removed. For SPI devices described via ACPI the spi_device.modalias string is initialized by acpi_device_hid. When using ACPI and DT ids this string ends up something like "PRP0001". Change acpi_register_spi_device to use the of_compatible property if present. This makes it easier to instantiate spi drivers through ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07i2c: acpi: Initialize info.type from of_compatibleDan O'Donovan
When using devicetree i2c_board_info.type is set to the compatible string with the vendor prefix removed. For I2C devices described via ACPI the i2c_board_info.type string is set to the ACPI device name. When using ACPI and DT ids this string ends up something like "PRP0001:00". If the of_compatible property is present try to use that instead. This makes it easier to instantiate i2c drivers through ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()Dan O'Donovan
When using devicetree stuff like i2c_client.name or spi_device.modalias is initialized to the first DT compatible id with the vendor prefix stripped. Since some drivers rely on this try to replicate it when using ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: export code duplicating array of property entriesDmitry Torokhov
When augmenting ACPI-enumerated devices with additional property data based on DMI info, a module has often several potential property sets, with only one being active on a given box. In order to save memory it should be possible to mark everything and __initdata or __initconst, execute DMI match early, and duplicate relevant properties. Then kernel will discard the rest of them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: constify property arrays valuesDmitry Torokhov
Data that is fed into property arrays should not be modified, so let's mark relevant pointers as const. This will allow us making source arrays as const/__initconst. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: allow to constify propertiesDmitry Torokhov
There is no reason why statically defined properties should be modifiable, so let's make device_add_properties() and the rest of pset_*() functions to take const pointers to properties. This will allow us to mark properties as const/__initconst at definition sites. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07[media] cx231xx: Fix I2C on Internal Master 3 BusOleh Kravchenko
Internal Master 3 Bus can send and receive only 4 bytes per time. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-07[media] cx231xx: Initial support Evromedia USB Full Hybrid Full HDOleh Kravchenko
This patch provide only digital support. The device is based on Si2168 30-demodulator, Si2158-20 tuner and CX23102-11Z chipset; USB id: 1b80:d3b2. Status: - DVB-T2 works fine; - Composite and SVideo works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-07sched/topology: Split out scheduler topology code from core.c into topology.cIngo Molnar
Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07sched/core: Remove unnecessary #include headersIngo Molnar
Over the years sched/core.c accumulated over 50 #include lines, 40 of which are superfluous. (!) Removing them decreases the preprocessed .c file (.i) size noticeably: triton:~/tip> wc -l kernel/sched/core.i Before: 76387 kernel/sched/core.i After: 75896 kernel/sched/core.i Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07sched/rq_clock: Consolidate the ordering of the rq_clock methodsIngo Molnar
update_rq_clock_task() and update_rq_clock() we unnecessarily spread across core.c, requiring an extra prototype line. Move them next to each other and in the proper order. Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07delayacct: Include <uapi/linux/taskstats.h>Ingo Molnar
include/linux/delayacct.h relies on 'struct taskstats' but does not include the header that defines it. This worked so far because files that included <linux/taskstats.h> also happened to include other headers that included uapi/linux/taskstats.h. Fix it. Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07sched/core: Clean up commentsIngo Molnar
Refresh the comments in the core scheduler code: - Capitalize sentences consistently - Capitalize 'CPU' consistently - ... and other small details. Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi/libstub: Make file I/O chunking x86-specificArd Biesheuvel
The ARM decompressor is finicky when it comes to uninitialized variables with local linkage, the reason being that it may relocate .text and .bss independently when executing from ROM. This is only possible if all references into .bss from .text are absolute, and this happens to be the case for references emitted under -fpic to symbols with external linkage, and so all .bss references must involve symbols with external linkage. When building the ARM stub using clang, the initialized local variable __chunk_size is optimized into a zero-initialized flag that indicates whether chunking is in effect or not. This flag is therefore emitted into .bss, which triggers the ARM decompressor's diagnostics, resulting in a failed build. Under UEFI, we never execute the decompressor from ROM, so the diagnostic makes little sense here. But we can easily work around the issue by making __chunk_size global instead. However, given that the file I/O chunking that is controlled by the __chunk_size variable is intended to work around known bugs on various x86 implementations of UEFI, we can simply make the chunking an x86 specific feature. This is an improvement by itself, and also removes the need to parse the efi= options in the stub entirely. Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-8-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Print the secure boot status in x86 setup_arch()David Howells
Print the secure boot status in the x86 setup_arch() function, but otherwise do nothing more for now. More functionality will be added later, but this at least allows for testing. Signed-off-by: David Howells <dhowells@redhat.com> [ Use efi_enabled() instead of IS_ENABLED(CONFIG_EFI). ] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-7-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Disable secure boot if shim is in insecure modeJosh Boyer
A user can manually tell the shim boot loader to disable validation of images it loads. When a user does this, it creates a UEFI variable called MokSBState that does not have the runtime attribute set. Given that the user explicitly disabled validation, we can honor that and not enable secure boot mode if that variable is set. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-6-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Get and store the secure boot statusDavid Howells
Get the firmware's secure-boot status in the kernel boot wrapper and stash it somewhere that the main kernel image can find. The efi_get_secureboot() function is extracted from the ARM stub and (a) generalised so that it can be called from x86 and (b) made to use efi_call_runtime() so that it can be run in mixed-mode. For x86, it is stored in boot_params and can be overridden by the boot loader or kexec. This allows secure-boot mode to be passed on to a new kernel. Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-5-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Add SHIM and image security database GUID definitionsJosh Boyer
Add the definitions for shim and image security database, both of which are used widely in various Linux distros. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-4-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07arm/efi: Allow invocation of arbitrary runtime servicesDavid Howells
efi_call_runtime() is provided for x86 to be able abstract mixed mode support. Provide this for ARM also so that common code work in mixed mode also. Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-3-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07x86/efi: Allow invocation of arbitrary runtime servicesDavid Howells
Provide the ability to perform mixed-mode runtime service calls for x86 in the same way the following commit provided the ability to invoke for boot services: 0a637ee61247bd ("x86/efi: Allow invocation of arbitrary boot services") Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07x86/apic: Fix a typo in a comment lineDou Liyang
s/bringin /bringing Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trivial@kernel.org Link: http://lkml.kernel.org/r/1486442688-24690-1-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07x86/kconfig: Remove misleading note regarding hibernation and KASLRNiklas Cassel
There used to be a restriction with KASLR and hibernation, but this is no longer true, and since commit: 65fe935dd238 ("x86/KASLR, x86/power: Remove x86 hibernation restrictions") the parameter "kaslr" does no longer exist. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Niklas Cassel <niklass@axis.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1486399429-23078-1-git-send-email-niklass@axis.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 10:06:06 +0000