summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-30usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()Yoshihiro Shimoda
This patch fixes an issue that the following commit causes NULL pointer dereference in dma_release_channel(). "usb: renesas_usbhs: add support for requesting DT DMA" (commit id abd2dbf6bb1b5f3a03a8c76b1a8879da1dd30caa) The usbhsf_dma_init_dt() should set fifo->{t,r}x_chan to NULL if dma_request_slave_channel_reason() returns IS_ERR value. Otherwise, usbhsf_dma_quit() will call dma_release_channel(), and then NULL pointer dereference happens. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the vbus interrupt requestRobert Jarzmik
Declare the interrupt as "one shot" so that it is masked until the end of the threaded handler. This prevents the irq core from spitting out an error : "Threaded irq requested with handler=NULL and !ONESHOT for irq 63" This was introduced by commit "usb: phy: generic: add vbus support". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: phy: generic: fix the gpios to be optionalRobert Jarzmik
All the gpios, ie. reset-gpios and vbus-detect-gpio, should be optional and not prevent the driver from working. Fix the regression in the behavior introduced by commit "usb: phy: generic: migrate to gpio_desc". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: initialize controller in pullup callbackGregory Herrero
USB reset interrupt is no more used to reset the controller. Thus, reset the controller in pullup callback as described by Synopsys programming guide. Otherwise enumeration sometimes fails when usb configuration is switched without physical disconnection. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: replace constants with definesMian Yousaf Kaukab
Defines are more readable and searchable than constants. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix phy interface configurationMian Yousaf Kaukab
hsotg->phyif is set in dwc2_gadget_init according to phy interface width. Use it for configuration instead of hardcoded value. Moreover, set USB turnaround time according to phy width. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix debug message for zlpMian Yousaf Kaukab
Print debug message according to zlp direction. Always saying "Sending" is misleading. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: don't modify pullup status during resetGregory Herrero
Pullup doesn't need to be enabled during usb reset since it is already enabled. This leads to shorter chirp-k duration if done during usb reset. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add reset flag in init functionGregory Herrero
Add a flag to request physical reset of the controller when s3c_hsotg_core_init_disconnected is called. During the usb reset, controller must not be fully reconfigured and resetted. Else this leads to shorter chirp-k duration during enumeration. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add unaligned buffers supportMian Yousaf Kaukab
When using DMA, dwc2 requires buffers to be 4 bytes aligned. Use bounce buffers if they are not. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: remove hardcoded if (0) and if (1) checksMian Yousaf Kaukab
Remove dead code as well. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix a typo in commentGregory Herrero
s3c_hsotg_process_req_feature comments was not correct Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add TEST_MODE feature supportGregory Herrero
Handle SET_FEATURE TEST_MODE request sent by the host. Slightly rework FEATURE request handling to allow parsing other request types than Endpoint. Also add a debugfs to change test mode value from user space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix clear halt feature handlingGregory Herrero
When clearing HALT on an endpoint, req->complete of in progress requests must be called with locks off. New request should only be started if there is not already a pending request on the endpoint. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: host: resume root hub on remote wakeupGregory Herrero
When a remote wakeup happens during bus_suspend, hcd needs to resume its root hub. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: musb: add omap-control dependencyArnd Bergmann
The omap musb front-end calls into the phy driver directly instead of using a generic phy interface, which causes a link error when the specific driver is not built-in: drivers/built-in.o: In function `omap2430_musb_disable': usb/musb/omap2430.c:480: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o: In function `omap2430_musb_enable': usb/musb/omap2430.c:466: undefined reference to `omap_control_usb_set_mode' usb/musb/omap2430.c:447: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o: In function `omap_musb_set_mailbox': usb/musb/omap2430.c:273: undefined reference to `omap_control_usb_set_mode' usb/musb/omap2430.c:304: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o:(.debug_addr+0xbd9e0): more undefined references to `omap_control_usb_set_mode' follow This adds an explicit dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca784be36cc725 ("usb: start using the control module driver") Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: musb: add generic usb phy dependenciesArnd Bergmann
Multiple musb glue drivers depend on the generic usb phy support, but fail to list it as a dependency in Kconfig. This results in build erros like: drivers/built-in.o: In function `am35x_remove': :(.text+0xadacc): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `am35x_probe': :(.text+0xae1c8): undefined reference to `usb_phy_generic_register' :(.text+0xae244): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `jz4740_remove': :(.text+0xaf648): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `jz4740_musb_init': :(.text+0xaf694): undefined reference to `usb_phy_generic_register' This adds the ones that are missing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: udc-core: add is_selfpowered sys entryPeter Chen
The user can read it through sys entry. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: musb: gadget: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: dwc3: gadget: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: pch_udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: atmel_usba_udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: net2272: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: s3c2410_udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: net2280: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: r8a66597-udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: omap_udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: fsl_udc_core: set value for common is_selfpoweredPeter Chen
fsl udc core assumes itself always self powered, so set is_selfpowered is 1. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: lpc32xx_udc: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: dummy_hcd: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: bdc_udc: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: renesas_usbhs: gadget: set value for common is_selfpoweredPeter Chen
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29staging: emxx_udc: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: at91_udc: use common is_selfpoweredPeter Chen
Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: chipidea: udc: add set_selfpowered gaget opsPeter Chen
The gadget power property will be used at get_status request. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: gadget: introduce is_selfpowered for usb_gadgetPeter Chen
Whether the gadget is selfpowerwed or not can be determined by composite core, so we can use a common entry to indicate if the self-powered is supported by gadget, and the related private variable at individual udc driver can be deleted. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: dwc3: gadget: add missing spin_lock()Felipe Balbi
commit 8e74475b0e0a (usb: dwc3: gadget: use udc-core's reset notifier) added support for the new UDC core's reset notifier to dwc3 but while at it, it removed a spin_lock() from dwc3_reset_gadget() which might cause an unbalanced spin_unlock() further down the line Fixes: 8e74475b0e0a (usb: dwc3: gadget: use udc-core's reset notifier) Cc: <stable@vger.kernel.org> # v3.19 Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: dwc3: remove reliance on dev_vdbg()Felipe Balbi
By moving all dev_vdbg() to tracepoints, we can finally get rid of dev_vdbg() usage from dwc3. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: dwc3: trace: add trace logs for core and gadgetFelipe Balbi
Sometimes we want to just print a formatted string without passing any extra data. The following will be used for removing reliance on dev_vdbg() from dwc3. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: dwc3: gadget: WARN() in case of unknown IRQFelipe Balbi
if an unknown IRQ event is triggered, that means the HW is really misbehaving. Instead of printing a debug message, let's WARN() so users report when that happens. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: dwc3: gadget: avoid variable shadowingFelipe Balbi
We already have both ret and dwc defined in this same function. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: gadget: uvc: comments for iterating over streaming hierarchyAndrzej Pietrasiewicz
The purpose of the functions and their parametrs might not be obvious to the reader, so explain it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: gadget: uvc: use explicit type instead of void *Andrzej Pietrasiewicz
The first parameter of __uvcg_iter_strm_cls() is always used in the context of struct uvcg_streaming_header, so change the function prototype accordingly. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: phy: mxs: add delay before set phyctrl.clkgatePeter Chen
There is a request from IC engineer that if we doesn't set phypwd as 0xffffffff, we need to delay about five 32Khz cycles before set phy's pwd register, otherwise, the wakeup signal may can't wake up controller. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connectionPeter Chen
At very rare cases, the SoF will not send out after resume with low speed connection. The workaround is do not power down PWD.RXPWD1PT1 bit during the suspend. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: phy: mxs: refine mxs_phy_disconnect_lineLi Jun
For non-otg mode, we keep the usage of disconnect line between phy analog and digital unchanging; for otg mode, at peripheral role, we keep the usage unchanging too, at host role, the digital part needs to know dp/dm change to respond device's data pulse when it is at low power mode. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: phy: mxs: don't need IP fix for imx6sxPeter Chen
The RLT code has already done it, so no software operation is needed. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: isp1760: Fix USB disabled checkLaurent Pinchart
The isp1760 driver registration function returns an error if USB is disabled. This made sense when the driver only supported host controllers, but now that it supports peripheral controllers host support isn't mandatory anymore. Fix this by returning an error only when both the HCD and UDC functions are disabled, either through the kernel configuration or at runtime. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: isp1760: Remove duplicate usb_disabled() checkLaurent Pinchart
Both isp1760_register() and isp1761_pci_probe() check whether USB is disabled by calling usb_disabled(), and bail out with an error if it is. One check is enough, remove the PCI-specific check. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: isp1760: Make HCD support optionalLaurent Pinchart
Enable compilation of the isp1760 driver in pure host mode, pure device mode, or dual-role mode. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit (git 2.34.1) at 2025-09-11 04:19:08 +0000