summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hostsBartlomiej Zolnierkiewicz
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow compiler to optimize out the function for non-SATA configs (for PATA hosts "ap && !ap->ops->set_lpm" condition is always true so it's sufficient for the function to return zero). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 17353 18 0 17371 43db drivers/ata/libata-eh.o after: 16607 18 0 16625 40f1 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hostsBartlomiej Zolnierkiewicz
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow compiler to optimize out the function for non-SATA configs. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36462 572 40 37074 90d2 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()Bartlomiej Zolnierkiewicz
When CONFIG_SATA_HOST=n there are no NCQ capable host drivers built so it is safe to hardwire ata_ncq_enabled() to always return zero. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37820 572 40 38432 9620 drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o after: 37582 572 40 38194 9532 drivers/ata/libata-core.o 20702 105 576 21383 5387 drivers/ata/libata-scsi.o 17353 18 0 17371 43db drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: fix CodingStyle issues in PATA timings codeBartlomiej Zolnierkiewicz
* fix the overly long line in ata_timing_quantize() * use standard kernel CodingStyle in ata_timing_merge() * do not use assignment in if condition in ata_timing_compute() * fix non-standard comment style in ata_timing_compute() Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove EXPORT_SYMBOL_GPL()s not used by modulesBartlomiej Zolnierkiewicz
Remove EXPORT_SYMBOL_GPL()s for functions used only by the core libata code. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39838 573 40 40451 9e03 drivers/ata/libata-core.o 21071 105 576 21752 54f8 drivers/ata/libata-scsi.o 17519 18 0 17537 4481 drivers/ata/libata-eh.o after: 39688 573 40 40301 9d6d drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move EXPORT_SYMBOL_GPL()s close to exported codeBartlomiej Zolnierkiewicz
Move EXPORT_SYMBOL_GPL()s close to exported code like it is done in other kernel subsystems. As a nice side effect this results in the removal of few ifdefs. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize ata_scsi_rbuf[] sizeBartlomiej Zolnierkiewicz
Currently the maximum required size of the ata_scsi_rbuf[] is 576 bytes in ata_scsiop_inq_89() so modify ATA_SCSI_RBUF_SIZE define accordingly. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o after: 20782 105 576 21463 53d7 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize struct ata_force_param sizeBartlomiej Zolnierkiewicz
Optimize struct ata_force_param size by: - using u8 for cbl and spd_limit fields - using u16 for lflags field Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 573 40 41677 a2cd drivers/ata/libata-core.o after: 40654 573 40 41267 a133 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] sizeBartlomiej Zolnierkiewicz
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[] size as libata parameters buffer doesn't need to be bigger than the command line buffer. For many architectures this results in decreased libata-core.o size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum PAGE_SIZE is 4096). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 4413 40 45517 b1cd drivers/ata/libata-core.o after: 41064 573 40 41677 a2cd drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: simplify ata_scsiop_inq_89()Bartlomiej Zolnierkiewicz
Initialize rbuf[] directly instead of using ata_tf_to_fis(). This results in simpler and smaller code. It also allows separating ata_tf_to_fis() into SATA specific libata part in the future. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20824 105 4096 25025 61c1 drivers/ata/libata-scsi.o after: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26sata_promise: use ata_cable_sata()Bartlomiej Zolnierkiewicz
Use core helper instead of open-coding it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: make SATA_PMP option selectable only if any SATA host driver is enabledBartlomiej Zolnierkiewicz
There is no reason to expose SATA_PMP config option when no SATA host drivers are enabled. To fix it add SATA_HOST config option, make all SATA host drivers select it and finally make SATA_PMP config options depend on it. This also serves as preparation for the future changes which optimize libata core code size on PATA only setups. CC: "James E.J. Bottomley" <jejb@linux.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hostsBartlomiej Zolnierkiewicz
There is no point in exposing ncq_enable_prio sysfs attribute for devices on PATA and non-NCQ capable SATA hosts so: * remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[] * add ata_ncq_sdev_attrs[] * update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove stale maintainership information from core codeBartlomiej Zolnierkiewicz
In commit 7634ccd2da97 ("libata: maintainership update") from 2018 Jens has officially taken over libata maintainership from Tejun so remove stale information from core libata code. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26staging: wilc1000: Use crc7 in lib/ rather than a private copyGeorge Spelvin
The code in lib/ is the desired polynomial, and even includes the 1-bit left shift in the table rather than needing to code it explicitly. While I'm in Kconfig, add a description of what a WILC1000 is. Kconfig questions that require me to look up a data sheet to find out that I probably don't have one are a pet peeve. Cc: Adham Abozaeid <adham.abozaeid@microchip.com> Cc: linux-wireless@vger.kernel.org Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200326152251.19094-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_alert().Sam Muhammed
Replace printk(KERN_ALERT ...) with netdev_alert() when a network device is available. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/70e8781cd2a9512cb6b3c42400a10323f3024f3c.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.Sam Muhammed
netdev_info() should be used instead of printk(KERN_INFO ...) since it's specific to and preferable for printing messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/ce20980cc1947255b8a2de3c1f1364c11c163b9e.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.Sam Muhammed
Use netdev_warn() over printk(). netdev_warn() is specific for printing warning messages for network devices, and preferable over printk(KERN_WARNING ...). Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/02fe0666cb737a3b0581081c9e7c179bfb820cac.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.Sam Muhammed
Replace printk(KERN_DEBUG ...) with netdev_dbg() across the driver. since netdev_dbg() is preferable and specific for printing debug messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/84dc7e33954509457efce2a35fb293e631845a96.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TXJohannes Berg
When a frame is transmitted via the nl80211 TX rather than as a normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and this will lead to wrong decisions (rate control etc.) being made about the frame; fix this. Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200326155333.f183f52b02f0.I4054e2a8c11c2ddcb795a0103c87be3538690243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: mark station unauthorized before key removalJohannes Berg
If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: Check port authorization in the ieee80211_tx_dequeue() caseJouni Malinen
mac80211 used to check port authorization in the Data frame enqueue case when going through start_xmit(). However, that authorization status may change while the frame is waiting in a queue. Add a similar check in the dequeue case to avoid sending previously accepted frames after authorization change. This provides additional protection against potential leaking of frames after a station has been disconnected and the keys for it are being removed. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26cfg80211: Do not warn on same channel at the end of CSAIlan Peer
When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26mac80211: drop data frames without key on encrypted linksJohannes Berg
If we know that we have an encrypted link (based on having had a key configured for TX in the past) then drop all data frames in the key selection handler if there's no key anymore. This fixes an issue with mac80211 internal TXQs - there we can buffer frames for an encrypted link, but then if the key is no longer there when they're dequeued, the frames are sent without encryption. This happens if a station is disconnected while the frames are still on the TXQ. Detecting that a link should be encrypted based on a first key having been configured for TX is fine as there are no use cases for a connection going from with encryption to no encryption. With extended key IDs, however, there is a case of having a key configured for only decryption, so we can't just trigger this behaviour on a key being configured. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-26staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callbackQiujun Huang
We can't handle the case length > WLAN_DATA_MAXLEN. Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove NULL check before kfreeSimran Singhal
NULL check before kfree is unnecessary so remove it. The following Coccinelle script was used to detect this: @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326132823.GA18625@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326143023.13681-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: os_dep: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326125500.12861-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: core: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326123540.12401-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove unnecessary cast on void pointerSimran Singhal
Assignment to a typed pointer is sufficient in C. No cast is needed. The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326113210.GA29951@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8188eu: cleanup long line in odm.cMichael Straube
Cleanup line over 80 characters by removing unnecessary test 'pDM_Odm->RSSI_Min <= 25'. The above test 'pDM_Odm->RSSI_Min > 25' already guarantees that it is <= 25. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200326084348.15072-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: make SERIAL_SPRD depend on COMMON_CLKChunyan Zhang
kbuild-test reported an error: config: mips-randconfig-a001-20200321 ... >> drivers/tty/serial/sprd_serial.c:1175: undefined reference to `clk_set_parent' Because some mips Kconfig selects HAVE_CLK but not COMMON_CLK and no clk_set_parent implemented, so the error was exposed. So adding dependence on COMMON_CLK can fix this issue. Fixes: 7ba87cfec71a ("tty: serial: make SERIAL_SPRD not depend on ARCH_SPRD") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20200325081427.20312-1-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: fsl_lpuart: fix return value checkingMichael Walle
The return value of lpuart_dma_tx_request() is an negative errno on failure and zero on success. Fixes: 159381df1442f ("tty: serial: fsl_lpuart: fix DMA operation when using IOMMU") Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200325090658.25967-2-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26tty: serial: fsl_lpuart: move dma_request_chan()Michael Walle
Move dma_request_chan() out of the atomic context. First this call should not be in the atomic context at all and second the dev_info_once() may cause a hang because because the console takes this spinlock, too. Fixes: 159381df1442f ("tty: serial: fsl_lpuart: fix DMA operation when using IOMMU") Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/20200325090658.25967-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26drm/scheduler: fix rare NULL ptr raceYintian Tao
There is one one corner case at dma_fence_signal_locked which will raise the NULL pointer problem just like below. ->dma_fence_signal ->dma_fence_signal_locked ->test_and_set_bit here trigger dma_fence_release happen due to the zero of fence refcount. ->dma_fence_put ->dma_fence_release ->drm_sched_fence_release_scheduled ->call_rcu here make the union fled “cb_list” at finished fence to NULL because struct rcu_head contains two pointer which is same as struct list_head cb_list Therefore, to hold the reference of finished fence at drm_sched_process_job to prevent the null pointer during finished fence dma_fence_signal [ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 732.914815] #PF: supervisor write access in kernel mode [ 732.915731] #PF: error_code(0x0002) - not-present page [ 732.916621] PGD 0 P4D 0 [ 732.917072] Oops: 0002 [#1] SMP PTI [ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1 [ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100 [ 732.938569] Call Trace: [ 732.939003] <IRQ> [ 732.939364] dma_fence_signal+0x29/0x50 [ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched] [ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched] [ 732.941910] dma_fence_signal_locked+0x85/0x100 [ 732.942692] dma_fence_signal+0x29/0x50 [ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu] [ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu] v2: hold the finished fence at drm_sched_process_job instead of amdgpu_fence_process v3: resume the blank line Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-26usb: cdns3: make signed 1 bit bitfields unsignedColin Ian King
The signed 1 bit bitfields should be unsigned, so make them unsigned. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200325125041.94769-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26usb: gadget: fsl: remove unused variable 'driver_desc'YueHaibing
drivers/usb/gadget/udc/fsl_udc_core.c:56:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] It is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200326071419.19240-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26usb: gadget: f_fs: Fix use after free issue as part of queue failureSriharsha Allenki
In AIO case, the request is freed up if ep_queue fails. However, io_data->req still has the reference to this freed request. In the case of this failure if there is aio_cancel call on this io_data it will lead to an invalid dequeue operation and a potential use after free issue. Fix this by setting the io_data->req to NULL when the request is freed as part of queue failure. Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> CC: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26usb: typec: Correct the documentation for typec_cable_put()Azhar Shaikh
typec_cable_put() function had typec_cable_get in it's documentation. Change it to reflect the correct name. Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Link: https://lore.kernel.org/r/20200326134633.26780-1-azhar.shaikh@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26mmc: mmci_sdmmc: Fix clear busyd0end irq flagLudovic Barre
The busyd0 line transition can be very fast. The busy request may be completed by busy_d0end, without waiting for the busy_d0 steps. Therefore, clear the busyd0end irq flag, even if no busy_status. Fixes: 0e68de6aa7b1 ("mmc: mmci: sdmmc: add busy_complete callback") Cc: stable@vger.kernel.org Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200325143409.13005-2-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-26xfrm: add prep for esp beet mode offloadXin Long
Like __xfrm_transport/mode_tunnel_prep(), this patch is to add __xfrm_mode_beet_prep() to fix the transport_header for gso segments, and reset skb mac_len, and pull skb data to the proto inside esp. This patch also fixes a panic, reported by ltp: # modprobe esp4_offload # runltp -f net_stress.ipsec_tcp [ 2452.780511] kernel BUG at net/core/skbuff.c:109! [ 2452.799851] Call Trace: [ 2452.800298] <IRQ> [ 2452.800705] skb_push.cold.98+0x14/0x20 [ 2452.801396] esp_xmit+0x17b/0x270 [esp4_offload] [ 2452.802799] validate_xmit_xfrm+0x22f/0x2e0 [ 2452.804285] __dev_queue_xmit+0x589/0x910 [ 2452.806264] __neigh_update+0x3d7/0xa50 [ 2452.806958] arp_process+0x259/0x810 [ 2452.807589] arp_rcv+0x18a/0x1c It was caused by the skb going to esp_xmit with a wrong transport header. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-26esp6: add gso_segment for esp6 beet modeXin Long
Similar to xfrm6_tunnel/transport_gso_segment(), _gso_segment() is added to do gso_segment for esp6 beet mode. Before calling inet6_offloads[proto]->callbacks.gso_segment, it needs to do: - Get the upper proto from ph header to get its gso_segment when xo->proto is IPPROTO_BEETPH. - Add SKB_GSO_TCPV6 to gso_type if x->sel.family != AF_INET6 and the proto == IPPROTO_TCP, so that the current tcp ipv6 packet can be segmented. - Calculate a right value for skb->transport_header and move skb->data to the transport header position. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-26esp4: add gso_segment for esp4 beet modeXin Long
Similar to xfrm4_tunnel/transport_gso_segment(), _gso_segment() is added to do gso_segment for esp4 beet mode. Before calling inet_offloads[proto]->callbacks.gso_segment, it needs to do: - Get the upper proto from ph header to get its gso_segment when xo->proto is IPPROTO_BEETPH. - Add SKB_GSO_TCPV4 to gso_type if x->sel.family == AF_INET6 and the proto == IPPROTO_TCP, so that the current tcp ipv4 packet can be segmented. - Calculate a right value for skb->transport_header and move skb->data to the transport header position. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-26dt-bindings: mmc: Fix node name in an exampleLubomir Rintel
The $nodename allows only "mmc@*" whereas the example node is named "sdhci". Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200317093922.20785-19-lkundrak@v3.sk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-26mmc: core: Re-work the code for eMMC sanitizeUlf Hansson
The error path for sanitize operations that completes with -ETIMEDOUT, is tightly coupled with the internal request handling code of the core. More precisely, mmc_wait_for_req_done() checks for specific sanitize errors. This is not only inefficient as it affects all types of requests, but also hackish. Therefore, let's improve the behaviour by moving the error path out of the mmc core. To do that, retuning needs to be held while running the sanitize operation. Moreover, to avoid exporting unnecessary symbols to the mmc block module, let's move the code into the mmc_ops.c file. While updating the actual code, let's also take the opportunity to clean up some of the mess around it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200316152152.15122-1-ulf.hansson@linaro.org
2020-03-26platform/x86: surface3_power: MSHW0011 rev-eng implementationBlaž Hrastnik
Patch was rebased on top of for-next. Thanks for your patience! Blaž I'm resubmitting this patch with review feedback addressed: https://patchwork.kernel.org/patch/10584079/ The patch was previously not resubmitted because it required a change that was reverted in the ACPICA. That has since been corrected: https://github.com/acpica/acpica/commit/9159c09a2a5897a43f78c95cdffc160d399722c3 We've been using this patch for a while and user reports confirm that it works: https://github.com/linux-surface/linux-surface Previous description follows. >8------------------------------------------------------8< The MSHW0011 device is a chip that replaces the battery firmware by using ACPI operation regions on the Surface 3. It is unclear whether or not the chip will be reused somewhere else (under Windows, the chip is called "Surface Platform Power Driver" and the driver is provided by Microsoft). The values have been obtained by reverse engineering, and are subject to errors. Looks like it works on overall pretty well. I couldn't manage to get the IRQ correctly triggered, so I am using a good old polling thread to check for changes. This is something to be fixed in a later version. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106231 Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-03-26perf/tests: Add CET instructions to the new instructions testAdrian Hunter
Add to the "x86 instruction decoder - new instructions" test the following instructions: incsspd incsspq rdsspd rdsspq saveprevssp rstorssp wrssd wrssq wrussd wrussq setssbsy clrssbsy endbr32 endbr64 And the notrack prefix for indirect calls and jumps. For information about the instructions, refer Intel Control-flow Enforcement Technology Specification May 2019 (334525-003). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20200204171425.28073-3-yu-cheng.yu@intel.com
generated by cgit (git 2.34.1) at 2025-09-13 02:37:19 +0000