summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-26mm/mremap: Add comment explaining the untagging behaviour of mremap()Will Deacon
Commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()") changed mremap() so that only the 'old' address is untagged, leaving the 'new' address in the form it was passed from userspace. This prevents the unexpected creation of aliasing virtual mappings in userspace, but looks a bit odd when you read the code. Add a comment justifying the untagging behaviour in mremap(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-26x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode mapYu-cheng Yu
Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20200204171425.28073-2-yu-cheng.yu@intel.com
2020-03-26Merge tag 'usb-serial-5.7-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.7-rc1 Here are the USB-serial updates for 5.7-rc1, including: - support for a new family of Fintek devices - fix for an io-edgeport slab-out-of-bounds access - fixes for a couple of kernel-doc issues Included are also various clean ups and some new modem device ids. All but the io-edgeport fix have been in linux-next with no reported issues. * tag 'usb-serial-5.7-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback USB: serial: option: add Wistron Neweb D19Q1 USB: serial: option: add BroadMobi BM806U USB: serial: option: add support for ASKEY WWHC050 USB: serial: f81232: add control driver for F81534A USB: serial: fix tty cleanup-op kernel-doc USB: serial: clean up carrier-detect helper USB: serial: f81232: set F81534A serial port with RS232 mode USB: serial: f81232: add F81534A support USB: serial: f81232: use devm_kzalloc for port data USB: serial: f81232: add tx_empty function USB: serial: f81232: extract LSR handler USB: serial: digi_acceleport: remove redundant assignment to pointer priv USB: serial: relax unthrottle memory barrier
2020-03-26KVM: X86: Narrow down the IPI fastpath to single target IPIWanpeng Li
The original single target IPI fastpath patch forgot to filter the ICR destination shorthand field. Multicast IPI is not suitable for this feature since wakeup the multiple sleeping vCPUs will extend the interrupt disabled time, it especially worse in the over-subscribe and VM has a little bit more vCPUs scenario. Let's narrow it down to single target IPI. Two VMs, each is 76 vCPUs, one running 'ebizzy -M', the other running cyclictest on all vCPUs, w/ this patch, the avg score of cyclictest can improve more than 5%. (pv tlb, pv ipi, pv sched yield are disabled during testing to avoid the disturb). Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1585189202-1708-3-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-26brcmfmac: add USB autosuspend feature supportWright Feng
We add enable dynamic suspend (autosuspend) support in host driver, and it can let platform cut down idle power consumption. To support autosuspend feature in host driver, kernel need to be built with CONFIG_USB_SUSPEND and autosuspend need to be turn on. And we also replace wowl feature with adding "needs_remote_wakeup", so that host still can be waken by wireless device. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-6-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: increase max hanger slots from 1K to 3K in fws layerMadhan Mohan R
Will enable FMAC to push more packets to bus tx queue and help improve throughput when fws queuing is enabled. This change is required to tune the throughput for passing WMM CERT tests. Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-5-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: fix the incorrect return value in brcmf_inform_single_bss().Raveendran Somu
The function brcmf_inform_single_bss returns the value as success, even when the length exceeds the maximum value. The fix is to send appropriate code on this error. This issue is observed when Cypress test group reported random fmac crashes when running their tests and the path was identified from the crash logs. With this fix the random failure issue in Cypress test group was resolved. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-4-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: Fix double freeing in the fmac usb data pathRaveendran Somu
When the brcmf_fws_process_skb() fails to get hanger slot for queuing the skb, it tries to free the skb. But the caller brcmf_netdev_start_xmit() of that funciton frees the packet on error return value. This causes the double freeing and which caused the kernel crash. Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-3-git-send-email-chi-hsien.lin@cypress.com
2020-03-26brcmfmac: Fix driver crash on USB control transfer timeoutRaveendran Somu
When the control transfer gets timed out, the error status was returned without killing that urb, this leads to using the same urb. This issue causes the kernel crash as the same urb is sumbitted multiple times. The fix is to kill the urb for timeout transfer before returning error Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-2-git-send-email-chi-hsien.lin@cypress.com
2020-03-26rtl8xxxu: Feed current txrate information for mac80211Chris Chiu
The nl80211 commands such as 'iw link' can't get current txrate information from the driver. This commit fills in the tx rate information from the C2H RA report in the sta_statistics function. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-3-chiu@endlessm.com
2020-03-26rtl8xxxu: add enumeration for channel bandwidthChris Chiu
There's a data field in H2C and C2H commands which is used to carry channel bandwidth information. Add enumeration to make it more descriptive in code. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-2-chiu@endlessm.com
2020-03-26rtw88: add a debugfs entry to enable/disable coex mechanismYan-Hsuan Chuang
Sometimes we need to stop the coex mechanism to debug, so that we can manually control the device through various outer commands. Hence, add a new debugfs coex_enable to allow us to enable/disable the coex mechanism when driver is running. To disable coex echo 0 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To enable coex echo 1 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To check coex dm is enabled or not cat /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200313033008.20070-3-yhchuang@realtek.com
2020-03-26rtw88: add a debugfs entry to dump coex's infoYan-Hsuan Chuang
Add a new entry "coex_info" in debugfs to dump coex's states for us to debug on coex's issues. The basic concept for co-existence (coex, usually for WiFi + BT) is to decide a strategy based on the current status of WiFi and BT. So, it means the WiFi driver requires to gather information from BT side and choose a strategy (TDMA/table/HW settings). Althrough we can easily check the current status of WiFi, e.g., from kernel log or just dump the hardware registers, it is still very difficult for us to gather so many different types of WiFi states (such as RFE config, antenna, channel/band, TRX, Power save). Also we will need BT's information that is stored in "struct rtw_coex". So it is necessary for us to have a debugfs that can dump all of the WiFi/BT information required. Note that to debug on coex related issues, we usually need a longer period of time of coex_info dump every 2 seconds (for example, 30 secs, so we should have 15 times of coex_info's dump). Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200313033008.20070-2-yhchuang@realtek.com
2020-03-26USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callbackQiujun Huang
Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-26staging: rtl8723bs: hal: Compress return logicSimran Singhal
Simplify function returns by merging assignment and return into one command line. Found with Coccinelle @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325214312.GA1936@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_cmd: Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It also removes variable cmd_obj as it is no longer needed. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325212253.GA8175@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_efuse: Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325205418.GA29149@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wilc1000: remove label from examples in DT binding documentationAjay Singh
Remove labels and not relevant property from DT binding documentation examples as suggested in [1]. 1. https://patchwork.ozlabs.org/patch/1252837 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20200325164234.14146-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25net/mlx5: E-switch, Protect eswitch mode changesParav Pandit
Currently eswitch mode change is occurring from 2 different execution contexts as below. 1. sriov sysfs enable/disable 2. devlink eswitch set commands Both of them need to access eswitch related data structures in synchronized manner. Without any synchronization below race condition exist. SR-IOV enable/disable with devlink eswitch mode change: cpu-0 cpu-1 ----- ----- mlx5_device_disable_sriov() mlx5_devlink_eswitch_mode_set() mlx5_eswitch_disable() esw_offloads_stop() esw_offloads_disable() mlx5_eswitch_disable() esw_offloads_disable() Hence, they are synchronized using a new mode_lock. eswitch's state_lock is not used as it can lead to a deadlock scenario below and state_lock is only for vport and fdb exclusive access. ip link set vf <param> netlink rcv_msg() - Lock A rtnl_lock vfinfo() esw->state_lock() - Lock B devlink eswitch_set devlink_mutex esw->state_lock() - Lock B attach_netdev() register_netdev() rtnl_lock - Lock A Alternatives considered: 1. Acquiring rtnl lock before taking esw->state_lock to follow similar locking sequence as ip link flow during eswitch mode set. rtnl lock is not good idea for two reasons. (a) Holding rtnl lock for several hundred device commands is not good idea. (b) It leads to below and more similar deadlocks. devlink eswitch_set devlink_mutex rtnl_lock - Lock A esw->state_lock() - Lock B eswitch_disable() reload() ib_register_device() ib_cache_setup_one() rtnl_lock() 2. Exporting devlink lock may lead to undesired use of it in vendor driver(s) in future. 3. Unloading representors outside of the mode_lock requires serialization with other process trying to enable the eswitch. 4. Differing the representors life cycle to a different workqueue requires synchronization with func_change_handler workqueue. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: E-switch, Extend eswitch enable to handle num_vfs changeParav Pandit
Subsequent patch protects eswitch mode changes across sriov and devlink interfaces. It is desirable for eswitch to provide thread safe eswitch enable and disable APIs. Hence, extend eswitch enable API to optionally update num_vfs when requested. In subsequent patch, eswitch num_vfs are updated after all the eswitch users eswitch drops its reference count. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Split eswitch mode check to different helper functionParav Pandit
In order to check eswitch state under a lock, prepare code to split capability check and eswitch state check into two helper functions. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25devlink: Rely on driver eswitch thread safety instead of devlinkParav Pandit
devlink_nl_cmd_eswitch_set_doit() doesn't hold devlink->lock mutex while invoking driver callback. This is likely due to eswitch mode setting involves adding/remove devlink ports, health reporters or other devlink objects for a devlink device. So it is driver responsiblity to ensure thread safe eswitch state transition happening via either sriov legacy enablement or via devlink eswitch set callback. Therefore, get() callback should also be invoked without holding devlink->lock mutex. Vendor driver can use same internal lock which it uses during eswitch mode set() callback. This makes get() and set() implimentation symmetric in devlink core and in vendor drivers. Hence, remove holding devlink->lock mutex during eswitch get() callback. Failing to do so results into below deadlock scenario when mlx5_core driver is improved to handle eswitch mode set critical section invoked by devlink and sriov sysfs interface in subsequent patch. devlink_nl_cmd_eswitch_set_doit() mlx5_eswitch_mode_set() mutex_lock(esw->mode_lock) <- Lock A [...] register_devlink_port() mutex_lock(&devlink->lock); <- lock B mutex_lock(&devlink->lock); <- lock B devlink_nl_cmd_eswitch_get_doit() mlx5_eswitch_mode_get() mutex_lock(esw->mode_lock) <- Lock A In subsequent patch, mlx5_core driver uses its internal lock during get() and set() eswitch callbacks. Other drivers have been inspected which returns either constant during get operations or reads the value from already allocated structure. Hence it is safe to remove the lock in get( ) callback and let vendor driver handle it. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Simplify mlx5_unload_one() and its callersParav Pandit
mlx5_unload_one() always returns 0. Simplify callers of mlx5_unload_one() and remove the dead code. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Simplify mlx5_register_device to return voidParav Pandit
mlx5_register_device() doesn't check for any error and always returns 0. Simplify mlx5_register_device() to return void and its caller, remove dead code related to it. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Avoid group version scan when not necessaryEli Cohen
Group version is used when modifying a rule is allowed (FLOW_ACT_NO_APPEND is clear) to detect a case where the rule was found but while the groups where unlocked a new FTE was added. In this case, the added FTE could be one with identical match value so we need to attempt again with group lock held. Change the code so version is retrieved only when FLOW_ACT_NO_APPEND is cleared. As result, later compare can also be avoided if FLOW_ACT_NO_APPEND is cleared. Also improve comments text. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Avoid incrementing FTE versionEli Cohen
FTE version is not used anywhere in the code so avoid incrementing it. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Fix group version managementEli Cohen
When adding a rule to a flow group we need increment the version of the group. Current code fails to do that and as a result, when trying to add a rule, we will fail to discover a case where an FTE with the same match value was added while we scanned the groups of the same match criteria, thus we may try to add an FTE that was already added. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: Simplify matching group searchesEli Cohen
Instead of using two different structs for searching groups with the same match, use a single struct and thus simplify the code, make it more readable and smaller size which means less code cache misses. text data bss dec hex before: 35524 2744 0 38268 957c after: 35038 2744 0 37782 9396 When testing add 70000 rules, delete all the rules, and repeat three times taking the average, we get (time in seconds): Before the change: insert 16.80, delete 11.02 After the change: insert 16.55, delete 10.95 Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: E-Switch, Use correct type for chain, prio and level valuesRoi Dayan
The correct type is u32. Fixes: d18296ffd9cc ("net/mlx5: E-Switch, Introduce global tables") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: E-Switch, free flow_group_in after creating the restore tableRoi Dayan
We allocate a temporary memory but forget to free it. Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: E-Switch, Enable chains only if regs loopback is enabledPaul Blakey
Register c0 loopback is needed to fully support chains and prios. Enable chains and prio only if loopback (of reg c1 which came together with c0), is enabled. To be able to check that, move enabling of loopback before eswitch chains init. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5: E-Switch, Enable restore table only if reg_c1 is supportedPaul Blakey
Reg c0/c1 matching, rewrite of regs c0/c1, and copy header of regs c1,B is needed for the restore table to function, might not be supported by firmware, and creation of the restore table or the copy header will fail. Check reg_c1 loopback support, as firmware which supports this, should have all of the above. Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5e: remove duplicated check chain_index in mlx5e_rep_setup_ft_cbwenxu
The function mlx5e_rep_setup_ft_cb check chain_index is zero twice. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5e: Fix actions_match_supported() returnDan Carpenter
The actions_match_supported() function returns a bool, true for success and false for failure. This error path is returning a negative which is cast to true but it should return false. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25bpf: Test_verifier, #70 error message updates for 32-bit right shiftJohn Fastabend
After changes to add update_reg_bounds after ALU ops and adding ALU32 bounds tracking the error message is changed in the 32-bit right shift tests. Test "#70/u bounds check after 32-bit right shift with 64-bit input FAIL" now fails with, Unexpected error message! EXP: R0 invalid mem access RES: func#0 @0 7: (b7) r1 = 2 8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP2 R10=fp0 fp-8_w=mmmmmmmm 8: (67) r1 <<= 31 9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967296 R10=fp0 fp-8_w=mmmmmmmm 9: (74) w1 >>= 31 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm 10: (14) w1 -= 2 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967294 R10=fp0 fp-8_w=mmmmmmmm 11: (0f) r0 += r1 math between map_value pointer and 4294967294 is not allowed And test "#70/p bounds check after 32-bit right shift with 64-bit input FAIL" now fails with, Unexpected error message! EXP: R0 invalid mem access RES: func#0 @0 7: (b7) r1 = 2 8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv2 R10=fp0 fp-8_w=mmmmmmmm 8: (67) r1 <<= 31 9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967296 R10=fp0 fp-8_w=mmmmmmmm 9: (74) w1 >>= 31 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv0 R10=fp0 fp-8_w=mmmmmmmm 10: (14) w1 -= 2 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967294 R10=fp0 fp-8_w=mmmmmmmm 11: (0f) r0 += r1 last_idx 11 first_idx 0 regs=2 stack=0 before 10: (14) w1 -= 2 regs=2 stack=0 before 9: (74) w1 >>= 31 regs=2 stack=0 before 8: (67) r1 <<= 31 regs=2 stack=0 before 7: (b7) r1 = 2 math between map_value pointer and 4294967294 is not allowed Before this series we did not trip the "math between map_value pointer..." error because check_reg_sane_offset is never called in adjust_ptr_min_max_vals(). Instead we have a register state that looks like this at line 11*, 11: R0_w=map_value(id=0,off=0,ks=8,vs=8, smin_value=0,smax_value=0, umin_value=0,umax_value=0, var_off=(0x0; 0x0)) R1_w=invP(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0xfffffffe; 0x0)) R10=fp(id=0,off=0, smin_value=0,smax_value=0, umin_value=0,umax_value=0, var_off=(0x0; 0x0)) fp-8_w=mmmmmmmm 11: (0f) r0 += r1 In R1 'smin_val != smax_val' yet we have a tnum_const as seen by 'var_off(0xfffffffe; 0x0))' with a 0x0 mask. So we hit this check in adjust_ptr_min_max_vals() if ((known && (smin_val != smax_val || umin_val != umax_val)) || smin_val > smax_val || umin_val > umax_val) { /* Taint dst register if offset had invalid bounds derived from * e.g. dead branches. */ __mark_reg_unknown(env, dst_reg); return 0; } So we don't throw an error here and instead only throw an error later in the verification when the memory access is made. The root cause in verifier without alu32 bounds tracking is having 'umin_value = 0' and 'umax_value = U64_MAX' from BPF_SUB which we set when 'umin_value < umax_val' here, if (dst_reg->umin_value < umax_val) { /* Overflow possible, we know nothing */ dst_reg->umin_value = 0; dst_reg->umax_value = U64_MAX; } else { ...} Later in adjust_calar_min_max_vals we previously did a coerce_reg_to_size() which will clamp the U64_MAX to U32_MAX by truncating to 32bits. But either way without a call to update_reg_bounds the less precise bounds tracking will fall out of the alu op verification. After latest changes we now exit adjust_scalar_min_max_vals with the more precise umin value, due to zero extension propogating bounds from alu32 bounds into alu64 bounds and then calling update_reg_bounds. This then causes the verifier to trigger an earlier error and we get the error in the output above. This patch updates tests to reflect new error message. * I have a local patch to print entire verifier state regardless if we believe it is a constant so we can get a full picture of the state. Usually if tnum_is_const() then bounds are also smin=smax, etc. but this is not always true and is a bit subtle. Being able to see these states helps understand dataflow imo. Let me know if we want something similar upstream. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507161475.15666.3061518385241144063.stgit@john-Precision-5820-Tower
2020-03-25bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()John Fastabend
Currently, for all op verification we call __red_deduce_bounds() and __red_bound_offset() but we only call __update_reg_bounds() in bitwise ops. However, we could benefit from calling __update_reg_bounds() in BPF_ADD, BPF_SUB, and BPF_MUL cases as well. For example, a register with state 'R1_w=invP0' when we subtract from it, w1 -= 2 Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op as done in above example. However tnum will be a constant because the ALU op is done on a constant. Without update_reg_bounds() we have a scenario where tnum is a const but our unsigned bounds do not reflect this. By calling update_reg_bounds after coerce to 32bit we further refine the umin_value to U64_MAX in the alu64 case or U32_MAX in the alu32 case above. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower
2020-03-25bpf: Verifer, refactor adjust_scalar_min_max_valsJohn Fastabend
Pull per op ALU logic into individual functions. We are about to add u32 versions of each of these by pull them out the code gets a bit more readable here and nicer in the next patch. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507149518.15666.15672349629329072411.stgit@john-Precision-5820-Tower
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25clk: imx: Align imx sc clock parent msg structs to 4Leonard Crestez
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-25clk: imx: Align imx sc clock msg structs to 4Leonard Crestez
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-25clk: Pass correct arguments to __clk_hw_register_gate()Stephen Boyd
I copy/pasted these macros and forgot to update the argument names and where they're passed to. Fix it so that these macros make sense. Reported-by: Maxime Ripard <maxime@cerno.tech> Fixes: 194efb6e2667 ("clk: gate: Add support for specifying parents via DT/pointers") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200325022257.148244-1-sboyd@kernel.org Tested-by: Maxime Ripard <mripard@kernel.org>
2020-03-26libbpf: Don't allocate 16M for log buffer by defaultStanislav Fomichev
For each prog/btf load we allocate and free 16 megs of verifier buffer. On production systems it doesn't really make sense because the programs/btf have gone through extensive testing and (mostly) guaranteed to successfully load. Let's assume successful case by default and skip buffer allocation on the first try. If there is an error, start with BPF_LOG_BUF_SIZE and double it on each ENOSPC iteration. v3: * Return -ENOMEM when can't allocate log buffer (Andrii Nakryiko) v2: * Don't allocate the buffer at all on the first try (Andrii Nakryiko) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200325195521.112210-1-sdf@google.com
2020-03-26libbpf: Remove unused parameter `def` to get_map_field_intTobias Klauser
Has been unused since commit ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs"). Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200325113655.19341-1-tklauser@distanz.ch
2020-03-26bpf: Document bpf_inspect drgn toolAndrey Ignatov
It's a follow-up for discussion in [1]. drgn tool bpf_inspect.py was merged to drgn repo in [2]. Document it in kernel tree to make BPF developers aware that the tool exists and can help with getting BPF state unavailable via UAPI. For now it's just one tool but the doc is written in a way that allows to cover more tools in the future if needed. Please refer to the doc itself for more details. The patch was tested by `make htmldocs` and sanity-checking that resulting html looks good. v2 -> v3: - two sections: "Description" and "Getting started" (Daniel); - add examples in "Getting started" section (Daniel); - add "Customization" section to show how tool can be customized. v1 -> v2: - better "BPF drgn tools" section (Alexei) [1] https://lore.kernel.org/bpf/20200228201514.GB51456@rdna-mbp/T/#mefed65e8a98116bd5d07d09a570a3eac46724951 [2] https://github.com/osandov/drgn/pull/49 Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200324185135.1431038-1-rdna@fb.com
2020-03-25Merge branch 'nvme-5.7-rc1' of git://git.infradead.org/nvme into for-5.7/driversJens Axboe
Pull 5.7 NVMe updates from Keith. * 'nvme-5.7-rc1' of git://git.infradead.org/nvme: (42 commits) nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts nvmet-rdma: Implement get_mdts controller op nvmet: Add get_mdts op for controllers nvme-pci: properly print controller address ...
2020-03-25Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connectionsLuiz Augusto von Dentz
This uses the DEFER_SETUP flag to group channels with L2CAP_CREDIT_BASED_CONNECTION_REQ. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-25drm/amdgpu: don't try to reserve training bo for sriov (v2)Monk Liu
1) SRIOV guest KMD doesn't care training buffer 2) if we resered training buffer that will overlap with IP discovery reservation because training buffer is at vram_size - 0x8000 and IP discovery is at ()vram_size - 0x10000 => vram_size -1) v2: squash in warning fix from Nirmoy Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-25drm/amdgpu/smu11: add support for SMU AC/DC interruptsAlex Deucher
Driver needs to send the ack message when it receives the AC/DC interrupt from the SMU. TODO: verify the client and src ids. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-25drm/amdgpu/swSMU: handle manual AC/DC notificationsAlex Deucher
For boards that do not support automatic AC/DC transitions in firmware, manually tell the firmware when the status changes. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-25drm/amdgpu/swSMU: handle DC controlled by GPIO for navi1xAlex Deucher
Check the platform caps in the vbios pptable to decide whether to enable automatic AC/DC transitions. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1043 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 13:30:24 +0000