| Age | Commit message (Collapse) | Author |
|---|
|
Reorganize vga_client_register() to avoid the goto and the need to save the
return value. Update the kernel-doc to reflect -ENODEV on failure. No
functional change intended.
[bhelgaas: drop "ret" variable, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-8-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In vga_arbiter_notify_clients(), "new_state" was computed during every loop
iteration even though it doesn't depend on anything that changes during the
loop. Move the computation outside the loop.
[bhelgaas: drop renames that obscure the purpose, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-6-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Previously vga_update_device_decodes() took "int new_decodes", but the
callers pass "unsigned int new_decodes". Correct the
vga_update_device_decodes() parameter type to "unsigned int" to match.
In vga_arbiter_notify_clients(), the return from vgadev->set_decode() is
"unsigned int" but was stored as "uint32_t new_decodes". Correct the
new_decodes type to "unsigned int".
[bhelgaas: use correct type for ->set_decode() return, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-5-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Previously vga_str_to_iostate() took "int *io_state", but vga_arb_write()
is the only caller and it passes "unsigned int *". Make the
vga_str_to_iostate() parameter type "unsigned int *" to match.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-2-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The behavior of mmap is modified with this patch series, so explain the
changes to the mmap hint address behavior.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230809232218.849726-5-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
sv57 is supported in the kernel so pgtable.h should reflect that.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230809232218.849726-4-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add tests that enforce mmap hint address behavior. mmap should default
to sv48. mmap will provide an address at the highest address space that
can fit into the hint address, unless the hint address is less than sv39
and not 0, then it will return a sv39 address.
These tests are split into two files: mmap_default.c and mmap_bottomup.c
because a new process must be exec'd in order to change the mmap layout.
The run_mmap.sh script sets the stack to be unlimited for the
mmap_bottomup.c test which triggers a bottomup layout.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20230809232218.849726-3-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Make sv48 the default address space for mmap as some applications
currently depend on this assumption. A hint address passed to mmap will
cause the largest address space that fits entirely into the hint to be
used. If the hint is less than or equal to 1<<38, an sv39 address will
be used. An exception is that if the hint address is 0, then a sv48
address will be used. After an address space is completely full, the next
smallest address space will be used.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20230809232218.849726-2-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
|
|
The pps-gpio bindings have been converted to yaml.
Update the file path accordingly.
Fixes: 7ceb60ece856 ("dt-bindings: pps: pps-gpio: Convert to yaml")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308230517.n0rrszYH-lkp@intel.com/
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20230822213317.60798-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With the DMA bouncing of unaligned kmalloc() buffers now in place,
enable it for riscv when RISCV_DMA_NONCOHERENT=y to allow the
kmalloc-{8,16,32,96} caches. Since RV32 doesn't enable SWIOTLB
yet, and I didn't see any dma noncoherent RV32 platforms in the
mainline, so skip RV32 now by only enabling
DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB is available. Once we see
such requirement on RV32, we can enable it then.
NOTE: we didn't force to create the swiotlb buffer even when the
end of RAM is within the 32-bit physical address range. That's to
say:
For RV64 with > 4GB memory, the feature is enabled.
For RV64 with <= 4GB memory, the feature isn't enabled by default. We
rely on users to pass "swiotlb=mmnn,force" where mmnn is the Number of
I/O TLB slabs, see kernel-parameters.txt for details.
Tested on Sipeed Lichee Pi 4A with 8GB DDR and Sipeed M1S BL808 Dock
board.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230718152214.2907-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E
64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel
Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus
it brings some bad effects to coherent platforms:
Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and
kmalloc-8 slab caches don't exist any more, they are replaced with
either kmalloc-128 or kmalloc-64.
Secondly, larger than necessary kmalloc aligned allocations results
in unnecessary cache/TLB pressure.
This issue also exists on arm64 platforms. From last year, Catalin
tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from
ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to
dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage
in various drivers with ARCH_DMA_MINALIGN etc.[1]
One fact we can make use of for riscv: if the CPU doesn't support
ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on
Catalin's work and above fact, we can easily solve the kmalloc align
issue for riscv: we can override dma_get_cache_alignment(), then let
it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know
the underlying HW neither supports ZICBOM nor supports T-HEAD CMO.
So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the
devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the
kmalloc minimum alignment, nothing changed in this case. This case
can be improved in the future.
After this patch, a simple test of booting to a small buildroot rootfs
on qemu shows:
kmalloc-96 5041 5041 96 ...
kmalloc-64 9606 9606 64 ...
kmalloc-32 5128 5128 32 ...
kmalloc-16 7682 7682 16 ...
kmalloc-8 10246 10246 8 ...
So we save about 1268KB memory. The saving will be much larger in normal
OS env on real HW platforms.
Link: https://lore.kernel.org/linux-arm-kernel/20230524171904.3967031-1-catalin.marinas@arm.com/ [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230718152214.2907-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support for enabling and using the binfmt_elf_fdpic program loader
on RISC-V platforms. The most important change is to setup registers
during program load to pass the mapping addresses to the new process.
One of the interesting features of the elf-fdpic loader is that it
also allows appropriately compiled ELF format binaries to be loaded on
nommu systems. Appropriate being those compiled with -pie.
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230711130754.481209-3-gerg@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The binfmt_flat_fdpic code has a number of 32-bit specific data
structures associated with it. Extend it to be able to support and
be used on 64-bit systems as well.
The new code defines a number of key 64-bit variants of the core
elf-fdpic data structures - along side the existing 32-bit sized ones.
A common set of generic named structures are defined to be either
the 32-bit or 64-bit ones as required at compile time. This is a
similar technique to that used in the ELF binfmt loader.
For example:
elf_fdpic_loadseg is either elf32_fdpic_loadseg or elf64_fdpic_loadseg
elf_fdpic_loadmap is either elf32_fdpic_loadmap or elf64_fdpic_loadmap
the choice based on ELFCLASS32 or ELFCLASS64.
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230711130754.481209-2-gerg@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Select ARCH_SUPPORTS_CFI_CLANG to allow CFI_CLANG to be selected
on riscv.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-14-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Filter out CC_FLAGS_CFI when CONFIG_CFI_CLANG.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-13-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With CONFIG_CFI_CLANG, the compiler injects a type preamble immediately
before each function and a check to validate the target function type
before indirect calls:
; type preamble
.word <id>
function:
...
; indirect call check
lw t1, -4(a0)
lui t2, <hi20>
addiw t2, t2, <lo12>
beq t1, t2, .Ltmp0
ebreak
.Ltmp0:
jarl a0
Implement error handling code for the ebreak traps emitted for the
checks. This produces the following oops on a CFI failure (generated
using lkdtm):
[ 21.177245] CFI failure at lkdtm_indirect_call+0x22/0x32 [lkdtm]
(target: lkdtm_increment_int+0x0/0x18 [lkdtm]; expected type: 0x3ad55aca)
[ 21.178483] Kernel BUG [#1]
[ 21.178671] Modules linked in: lkdtm
[ 21.179037] CPU: 1 PID: 104 Comm: sh Not tainted
6.3.0-rc6-00037-g37d5ec6297ab #1
[ 21.179511] Hardware name: riscv-virtio,qemu (DT)
[ 21.179818] epc : lkdtm_indirect_call+0x22/0x32 [lkdtm]
[ 21.180106] ra : lkdtm_CFI_FORWARD_PROTO+0x48/0x7c [lkdtm]
[ 21.180426] epc : ffffffff01387092 ra : ffffffff01386f14 sp : ff20000000453cf0
[ 21.180792] gp : ffffffff81308c38 tp : ff6000000243f080 t0 : ff20000000453b78
[ 21.181157] t1 : 000000003ad55aca t2 : 000000007e0c52a5 s0 : ff20000000453d00
[ 21.181506] s1 : 0000000000000001 a0 : ffffffff0138d170 a1 : ffffffff013870bc
[ 21.181819] a2 : b5fea48dd89aa700 a3 : 0000000000000001 a4 : 0000000000000fff
[ 21.182169] a5 : 0000000000000004 a6 : 00000000000000b7 a7 : 0000000000000000
[ 21.182591] s2 : ff20000000453e78 s3 : ffffffffffffffea s4 : 0000000000000012
[ 21.183001] s5 : ff600000023c7000 s6 : 0000000000000006 s7 : ffffffff013882a0
[ 21.183653] s8 : 0000000000000008 s9 : 0000000000000002 s10: ffffffff0138d878
[ 21.184245] s11: ffffffff0138d878 t3 : 0000000000000003 t4 : 0000000000000000
[ 21.184591] t5 : ffffffff8133df08 t6 : ffffffff8133df07
[ 21.184858] status: 0000000000000120 badaddr: 0000000000000000
cause: 0000000000000003
[ 21.185415] [<ffffffff01387092>] lkdtm_indirect_call+0x22/0x32 [lkdtm]
[ 21.185772] [<ffffffff01386f14>] lkdtm_CFI_FORWARD_PROTO+0x48/0x7c [lkdtm]
[ 21.186093] [<ffffffff01383552>] lkdtm_do_action+0x22/0x34 [lkdtm]
[ 21.186445] [<ffffffff0138350c>] direct_entry+0x128/0x13a [lkdtm]
[ 21.186817] [<ffffffff8033ed8c>] full_proxy_write+0x58/0xb2
[ 21.187352] [<ffffffff801d4fe8>] vfs_write+0x14c/0x33a
[ 21.187644] [<ffffffff801d5328>] ksys_write+0x64/0xd4
[ 21.187832] [<ffffffff801d53a6>] sys_write+0xe/0x1a
[ 21.188171] [<ffffffff80003996>] ret_from_syscall+0x0/0x2
[ 21.188595] Code: 0513 0f65 a303 ffc5 53b7 7e0c 839b 2a53 0363 0073 (9002) 9582
[ 21.189178] ---[ end trace 0000000000000000 ]---
[ 21.189590] Kernel panic - not syncing: Fatal exception
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com> # ISA bits
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-12-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit 883bbbffa5a4 ("ftrace,kcfi: Separate ftrace_stub() and
ftrace_stub_graph()") added a separate ftrace_stub_graph function for
CFI_CLANG. Add the stub to fix FUNCTION_GRAPH_TRACER compatibility
with CFI.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-11-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With CONFIG_CFI_CLANG, assembly functions indirectly called
from C code must be annotated with type identifiers to pass CFI
checking. Use the SYM_TYPED_START macro to add types to the
relevant functions.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-10-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit f0bddf50586d ("riscv: entry: Convert to generic entry") moved
syscall handling to C code, which exposed function pointer type
mismatches that trip fine-grained forward-edge Control-Flow Integrity
(CFI) checks as syscall handlers are all called through the same
syscall_t pointer type. To fix the type mismatches, implement pt_regs
based syscall wrappers similarly to x86 and arm64.
This patch is based on arm64 syscall wrappers added in commit
4378a7d4be30 ("arm64: implement syscall wrappers"), where the main goal
was to minimize the risk of userspace-controlled values being used
under speculation. This may be a concern for riscv in future as well.
Following other architectures, the syscall wrappers generate three
functions for each syscall; __riscv_<compat_>sys_<name> takes a pt_regs
pointer and extracts arguments from registers, __se_<compat_>sys_<name>
is a sign-extension wrapper that casts the long arguments to the
correct types for the real syscall implementation, which is named
__do_<compat_>sys_<name>.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230710183544.999540-9-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).
After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.
Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-2-imre.deak@intel.com
(cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).
After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.
Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-2-imre.deak@intel.com
(cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
rpcrdma_bc_post_recv() is never implemented since introduction in
commit f531a5dbc451 ("xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Now that the remaining issues have been worked out, including some
unexpected 32 bit issues, we can safely enable the feature by default.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the pages are in HIGHMEM then we need to make sure they're mapped
before trying to read data off of them, otherwise we could end up with a
NULL pointer dereference.
The downside to this is that we need an extra cleanup step at the end of
decode to kunmap() the last page. I introduced an xdr_finish_decode()
function to do this. Right now this function only calls the
unmap_current_page() function, but other generic cleanup steps could be
added in the future if we come across anything else.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
I found that the read code might send multiple requests using the same
nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is
how we ended up occasionally double-freeing the scratch buffer, but also
means we set a NULL pointer but non-zero length to the xdr scratch
buffer. This results in an oops the first time decoding needs to copy
something to scratch, which frequently happens when decoding READ_PLUS
hole segments.
I fix this by moving scratch handling into the pageio read code. I
provide a function to allocate scratch space for decoding read replies,
and free the scratch buffer when the nfs_pgio_header is freed.
Fixes: fbd2a05f29a9 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
I bump the decode_read_plus_maxsz to account for hole segments, but I
need to subtract out this increase when calling
rpc_prepare_reply_pages() so the common case of single data segment
replies can be directly placed into the xdr pages without needing to be
shifted around.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Smatch reports:
fs/nfs/nfs42xdr.c:1131 decode_read_plus() warn: missing error code? 'status'
Which Dan suggests to fix by doing a hardcoded "return 0" from the
"if (segments == 0)" check.
Additionally, smatch reports that the "status = -EIO" assignment is not
used. This patch addresses both these issues.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305222209.6l5VM2lL-lkp@intel.com/
Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Reference common panel bindings to bring descriptions of common fields
like panel-timing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230823081107.82967-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the bindings for Synaptics RMI4 bus and devices to DT schema.
Changes during conversion:
1. Add reset-gpios already used in DTS and mentioned by RMI4
specification.
2. Do not require address/size cells, because without functions
(children) they aren't really needed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230728165054.88678-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert arm/msm/ssbi.txt yo YAML, moving it to the directory with bus
bindings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230822001349.899298-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Run the test for the overlay apply/revert sequence three times, to
test if there are unbalanced of_node_put() calls causing reference
counts to become negative.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a9fb4eb560c58d11a7f167bc78a137b46e76cf15.1692699743.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Andy Chiu <andy.chiu@sifive.com> says:
We add a vlenb field in Vector context and save it with the
riscv_vstate_save() macro. It should not cause performance regression as
VLENB is a design-time constant and is frequently used by hardware.
Also, adding this field into the __sc_riscv_v_state may benifit us on a
future compatibility issue becuse a hardware may have writable VLENB.
Adding and saving VLENB have an immediate benifit as it gives ptrace a
better view of the Vector extension and makes it possible to reconstruct
Vector register files from the dump without doing an additional csr read.
This patchset also sync the number of note types between us and gdb for
riscv to solve a conflicting note.
This is not an ABI break given that 6.5 has not been released yet.
* b4-shazam-merge:
RISC-V: vector: export VLENB csr in __sc_riscv_v_state
RISC-V: Remove ptrace support for vectors
Link: https://lore.kernel.org/r/20230816155450.26200-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Associate the swnode of the GPIO device's (which is the interrupt
controller here) with the irq domain. Otherwise the interrupt-controller
device attribute is a no-op.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If a GPIO simulator device is unbound with interrupts still requested,
we will hit a use-after-free issue in __irq_domain_deactivate_irq(). The
owner of the irq domain must dispose of all mappings before destroying
the domain object.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
clang warns (or errors with CONFIG_WERROR=y):
sound/soc/codecs/cs42l43.c:1371:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
1371 | default:
| ^~~~~~~
sound/soc/codecs/cs42l43.c:1377:9: note: uninitialized use occurs here
1377 | return ret;
| ^~~
sound/soc/codecs/cs42l43.c:1349:9: note: initialize the variable 'ret' to silence this warning
1349 | int ret;
| ^
| = 0
1 error generated.
Initialize ret to 0 in the default case, as there was nothing to do for
other event types.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1922
Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230823-cs42l43_pll_ev-init-ret-v1-1-5836f1ad5dad@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Xingyu Wu <xingyu.wu@starfivetech.com>:
This patch series adds I2S support for the StarFive JH7110 RISC-V
SoC based on Designware I2S controller. There has three I2S channels
(RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
two for playback(TX).
The first patch adds support for the StarFive JH7110 SoC in the
Designware I2S bindings.
The second patch adds the ops to get data from platform bus in the
I2S driver.
The third patch adds support for the StarFive JH7110 SoC in
the Designware I2S driver.
The fourth patch fixes the name of I2STX1 pinmux.
The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
This patch series is based on Linux-next(20230818) which is merge
clock, syscon and dma nodes for the StarFive JH7110 SoC.
The series has been tested and works normally on the VisionFive 2
board by plugging an audio expansion board.
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas Sound has ADG for clock control. Basically it needs
accurately divisible external input clock. But sometimes
sometimes it doesn't have to be accurate for some reason.
We can use ADG clk_i for such case. It came from CPG as
very high rate clock, but is not accurately divisible for
48kHz/44.1kHz rate, but enough for approximate rate.
This patch set support such use case.
|
|
vmw_bo_unreference sets the input buffer to null on exit, resulting in
null ptr deref's on the subsequent drm gem put calls.
This went unnoticed because only very old userspace would be exercising
those paths but it wouldn't be hard to hit on old distros with brand
new kernels.
Introduce a new function that abstracts unrefing of user bo's to make
the code cleaner and more explicit.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Ian Forbes <iforbes@vmware.com>
Fixes: 9ef8d83e8e25 ("drm/vmwgfx: Do not drop the reference to the handle too soon")
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Maaz Mombasawala<mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818041301.407636-1-zack@kde.org
|
|
For multiple commands the driver was not correctly validating the shader
stages resulting in possible kernel oopses. The validation code was only.
if ever, checking the upper bound on the shader stages but never a lower
bound (valid shader stages start at 1 not 0).
Fixes kernel oopses ending up in vmw_binding_add, e.g.:
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 2443 Comm: testcase Not tainted 6.3.0-rc4-vmwgfx #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:vmw_binding_add+0x4c/0x140 [vmwgfx]
Code: 7e 30 49 83 ff 0e 0f 87 ea 00 00 00 4b 8d 04 7f 89 d2 89 cb 48 c1 e0 03 4c 8b b0 40 3d 93 c0 48 8b 80 48 3d 93 c0 49 0f af de <48> 03 1c d0 4c 01 e3 49 8>
RSP: 0018:ffffb8014416b968 EFLAGS: 00010206
RAX: ffffffffc0933ec0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 00000000ffffffff RSI: ffffb8014416b9c0 RDI: ffffb8014316f000
RBP: ffffb8014416b998 R08: 0000000000000003 R09: 746f6c735f726564
R10: ffffffffaaf2bda0 R11: 732e676e69646e69 R12: ffffb8014316f000
R13: ffffb8014416b9c0 R14: 0000000000000040 R15: 0000000000000006
FS: 00007fba8c0af740(0000) GS:ffff8a1277c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000007c0933eb8 CR3: 0000000118244001 CR4: 00000000003706e0
Call Trace:
<TASK>
vmw_view_bindings_add+0xf5/0x1b0 [vmwgfx]
? ___drm_dbg+0x8a/0xb0 [drm]
vmw_cmd_dx_set_shader_res+0x8f/0xc0 [vmwgfx]
vmw_execbuf_process+0x590/0x1360 [vmwgfx]
vmw_execbuf_ioctl+0x173/0x370 [vmwgfx]
? __drm_dev_dbg+0xb4/0xe0 [drm]
? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx]
drm_ioctl_kernel+0xbc/0x160 [drm]
drm_ioctl+0x2d2/0x580 [drm]
? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx]
? do_fault+0x1a6/0x420
vmw_generic_ioctl+0xbd/0x180 [vmwgfx]
vmw_unlocked_ioctl+0x19/0x20 [vmwgfx]
__x64_sys_ioctl+0x96/0xd0
do_syscall_64+0x5d/0x90
? handle_mm_fault+0xe4/0x2f0
? debug_smp_processor_id+0x1b/0x30
? fpregs_assert_state_consistent+0x2e/0x50
? exit_to_user_mode_prepare+0x40/0x180
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x8b/0x180
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: security@openanolis.org
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Testcase-found-by: Niels De Graef <ndegraef@redhat.com>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Cc: <stable@vger.kernel.org> # v4.3+
Reviewed-by: Maaz Mombasawala<mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616190934.54828-1-zack@kde.org
|
|
We don't need to have "format" property on DT any more if
CPU/Codec driver has .auto_selectable_formats settings
on snd_soc_dai_ops. The sample dtsi doesn't have it.
To avoid user confusion, this patch indicates it on comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edjuzk2p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Yafang Shao says:
====================
bpf: Fix an issue in verifing allow_ptr_leaks
Patch #1: An issue found in our local 6.1 kernel.
This issue also exists in bpf-next.
Patch #2: Selftess for #1
v1->v2:
- Add acked-by from Eduard
- Fix build error reported by Alexei
====================
Link: https://lore.kernel.org/r/20230823020703.3790-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- Without prev commit
$ tools/testing/selftests/bpf/test_progs --name=tc_bpf
#232/1 tc_bpf/tc_bpf_root:OK
test_tc_bpf_non_root:PASS:set_cap_bpf_cap_net_admin 0 nsec
test_tc_bpf_non_root:PASS:disable_cap_sys_admin 0 nsec
0: R1=ctx(off=0,imm=0) R10=fp0
; if ((long)(iph + 1) > (long)skb->data_end)
0: (61) r2 = *(u32 *)(r1 +80) ; R1=ctx(off=0,imm=0) R2_w=pkt_end(off=0,imm=0)
; struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
1: (61) r1 = *(u32 *)(r1 +76) ; R1_w=pkt(off=0,r=0,imm=0)
; if ((long)(iph + 1) > (long)skb->data_end)
2: (07) r1 += 34 ; R1_w=pkt(off=34,r=0,imm=0)
3: (b4) w0 = 1 ; R0_w=1
4: (2d) if r1 > r2 goto pc+1
R2 pointer comparison prohibited
processed 5 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
test_tc_bpf_non_root:FAIL:test_tc_bpf__open_and_load unexpected error: -13
#233/2 tc_bpf_non_root:FAIL
- With prev commit
$ tools/testing/selftests/bpf/test_progs --name=tc_bpf
#232/1 tc_bpf/tc_bpf_root:OK
#232/2 tc_bpf/tc_bpf_non_root:OK
#232 tc_bpf:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230823020703.3790-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Notice that it is not necessary to assign tick_intercept_sum in every
iteration of the first loop over idle states in teo_select(), because
the intercept_sum value does not change after the assignment in a
given iteration of the loop, so its value after the last iteration of
the loop can be used for computing the tick_intercept_sum value
directly.
Modify the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like a few other drivers, YMFPCI driver needs to clean up with
snd_card_free() call at an error path of the probe; otherwise the
other devres resources are released before the card and it results in
the UAF.
This patch uses the helper for handling the probe error gracefully.
Fixes: f33fc1576757 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Closes: https://lore.kernel.org/r/20230823135846.1812-1-takashi.yano@nifty.ne.jp
Link: https://lore.kernel.org/r/20230823161625.5807-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
