summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-26be2net: Check for POST state in suspend-resume sequenceSarveshwar Bandi
In suspend-resume sequence, the OS could attempt to initialize the controller before it is ready, check for POST state before going ahead. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26PCI: Warn if unsafe MPS settings detectedYijing Wang
If a BIOS configures MPS incorrectly, devices may not work normally. For example, if a bridge has MPS set larger than an endpoint below it, the endpoint may discard packets. To help diagnose this issue, print a warning if we find an endpoint MPS setting different than that of the upstream bridge. [bhelgaas: changelog, "bridge" temporary, warning text] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60799 Reported-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jon Mason <jdmason@kudzu.us>
2013-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c include/linux/inetdevice.h The inetdevice.h conflict involves moving the IPV4_DEVCONF values into a UAPI header, overlapping additions of some new entries. The iwlwifi conflict is a context overlap. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26perf trace: Add beautifier for mmap flags parmArnaldo Carvalho de Melo
[root@zoo ~]# perf trace -e mmap,mprotect sleep 1 0.992 ( 0.015 ms): mmap(addr: 0, len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: 4294967295, off: 0) = 0xa60be000 1.108 ( 0.012 ms): mmap(addr: 0, len: 125100, prot: READ, flags: PRIVATE, fd: 3, off: 0 ) = 0xa609f000 1.209 ( 0.014 ms): mmap(addr: 0x33c1600000, len: 3896312, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3, off: 0) = 0xc1600000 1.232 ( 0.018 ms): mprotect(start: 0x33c17ad000, len: 2097152, prot: NONE ) = 0 1.255 ( 0.018 ms): mmap(addr: 0x33c19ad000, len: 24576, prot: READ|WRITE, flags: PRIVATE|DENYWRITE|FIXED, fd: 3, off: 1757184) = 0xc19ad000 1.281 ( 0.011 ms): mmap(addr: 0x33c19b3000, len: 17400, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS|FIXED, fd: 4294967295, off: 0) = 0xc19b3000 1.328 ( 0.008 ms): mmap(addr: 0, len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: 4294967295, off: 0) = 0xa609e000 1.346 ( 0.008 ms): mmap(addr: 0, len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: 4294967295, off: 0) = 0xa609c000 1.443 ( 0.013 ms): mprotect(start: 0x606000, len: 4096, prot: READ ) = 0 1.459 ( 0.011 ms): mprotect(start: 0x33c19ad000, len: 16384, prot: READ ) = 0 1.477 ( 0.011 ms): mprotect(start: 0x33c1420000, len: 4096, prot: READ ) = 0 1.855 ( 0.013 ms): mmap(addr: 0, len: 104789808, prot: READ, flags: PRIVATE, fd: 3, off: 0) = 0x9fcac000 [root@zoo ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q1ubhdd9wigxneam616ggdsn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Add beautifier for mmap prot parmArnaldo Carvalho de Melo
[root@zoo ~]# perf trace -e mmap,mprotect sleep 1 0.984 ( 0.015 ms): mmap(addr: 0, len: 4096, prot: READ|WRITE, flags: 34, fd: 4294967295, off: 0) = 0xd62ae000 1.114 ( 0.016 ms): mmap(addr: 0, len: 125100, prot: READ, flags: 2, fd: 3, off: 0 ) = 0xd628f000 1.252 ( 0.020 ms): mmap(addr: 0x33c1600000, len: 3896312, prot: EXEC|READ, flags: 2050, fd: 3, off: 0) = 0xc1600000 1.282 ( 0.024 ms): mprotect(start: 0x33c17ad000, len: 2097152, prot: NONE ) = 0 1.315 ( 0.026 ms): mmap(addr: 0x33c19ad000, len: 24576, prot: READ|WRITE, flags: 2066, fd: 3, off: 1757184) = 0xc19ad000 1.352 ( 0.017 ms): mmap(addr: 0x33c19b3000, len: 17400, prot: READ|WRITE, flags: 50, fd: 4294967295, off: 0) = 0xc19b3000 1.415 ( 0.011 ms): mmap(addr: 0, len: 4096, prot: READ|WRITE, flags: 34, fd: 4294967295, off: 0) = 0xd628e000 1.440 ( 0.011 ms): mmap(addr: 0, len: 8192, prot: READ|WRITE, flags: 34, fd: 4294967295, off: 0) = 0xd628c000 1.569 ( 0.019 ms): mprotect(start: 0x606000, len: 4096, prot: READ ) = 0 1.591 ( 0.017 ms): mprotect(start: 0x33c19ad000, len: 16384, prot: READ ) = 0 1.616 ( 0.016 ms): mprotect(start: 0x33c1420000, len: 4096, prot: READ ) = 0 2.105 ( 0.018 ms): mmap(addr: 0, len: 104789808, prot: READ, flags: 2, fd: 3, off: 0 ) = 0xcfe9c000 [root@zoo ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q1ubhdd9wigxneam616ggdsn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Allow overiding the formatting of syscall fieldsArnaldo Carvalho de Melo
The mmap syscalls, for instance, don't have the FORMAT_IS_POINTER for its pointer arguments, override it. This also paves the way for more specialized argument beautifiers, like for mmap's prot and flags arguments. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-mm864hvhrpt39muxmmbtjasz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Add aliases to remaining syscalls of the sys_enter_newfooArnaldo Carvalho de Melo
Before: 2392.918 ( 0.008 ms): 21581 lstat(arg0: 140734915488448, arg1: 140734915488240, arg2: 140734915488240, arg3: 3, arg4: 24426352, arg5: 98) = 0 After: 7408.087 ( 0.013 ms): 21969 lstat(filename: 0x7fff44b4bf20, statbuf: 0x7fff44b4be50 ) = 0 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-8nxaole8mb7zyopk47tdellj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Allow printing syscall return values in hexArnaldo Carvalho de Melo
event_format->flags has a FIELD_IS_POINTER, but it is not set for the sys_exit 'ret' field in syscalls like mmap, so we need a way to ask for hex printing for pointer returns and keep things like 'read' returns printing in decimal. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lfuveegw4od1t08n7bsmonrm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Simplify sys_exit return printingArnaldo Carvalho de Melo
Avoiding multiple sc->fmt != NULL tests. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-w28d1o3uslden0k57653kda7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Introduce syscall arg formattersArnaldo Carvalho de Melo
Starting with one for printing pointers in hexadecimal, using the information in the syscall tracepoint format. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-c4y4jy7qqkn8wsd8q6j1g7zh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Hide sys_exit messages about syscall id = -1Arnaldo Carvalho de Melo
That was reproduced via ftrace as described in this cset comment log, need to investigate further. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-n1i3m0vo6mgq3ddjj95sls2s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Add --verbose optionArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ain6q4u8g3bpnh18yhw24v2x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Support ! in -e expressionsArnaldo Carvalho de Melo
So that we can ask for all but a set of syscalls to be traced. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9j6hvap23qanyl96wx4mrj9k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf tools: Don't install scripting files files when disabledArnaldo Carvalho de Melo
No need to install perl or python files when the respective NO_LIBP{YTHON,ERL} define is set. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-c69d4jz08gb1zm2vpervva2q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf tools: Sample after exit loses thread correlationDavid Ahern
Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26perf trace: Make command line arguments consistent with perf-recordDavid Ahern
Common arguments like thread id, CPU list, mmap pages, etc should be consistent across perf commands. v3: Updated man page v2: rebased to latest core branch Signed-off-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1377018945-21940-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26Merge branch 'cadence'David S. Miller
Boris BREZILLON says: ==================== net/cadence/macb: add support for dt phy definition This patch series adds support for ethernet phy definition using device tree. This may help in moving some at91 boards to dt (some of them define an interrupt pin). Tested on samad31ek. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26ARM: at91/dt: define phy available on sama5d3 mother boardBoris BREZILLON
This patch describe the phy used on atmel sama5d3 mother board: - phy address - phy interrupt pin Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26net/cadence/macb: add support for dt phy definitionBoris BREZILLON
The macb driver only handle PHY description through platform_data (macb_platform_data). Thus, when using dt you cannot define phy properties like phy address or phy irq pin. This patch makes use of the of_mdiobus_register to add support for phy device definition using dt. A fallback to the autoscan procedure is added in case there is no phy devices defined in dt. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26perf trace: Implement -o/--output filenameArnaldo Carvalho de Melo
To output all 'trace' output to a filename, just like 'strace -ofile' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6q1homkwoayhmoq64y5vhel6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-26ASoC: fsl_ssi: Remove unnecessary dev_set_drvdata()Fabio Estevam
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-26HID: hidraw: Add spinlock in struct hidraw to protect listYonghua Zheng
It is unsafe to call list_for_each_entry in hidraw_report_event to traverse each hidraw_list node without a lock protection, the list could be modified if someone calls hidraw_release and list_del to remove itself from the list, this can cause hidraw_report_event to touch a deleted list struct and panic. To prevent this, introduce a spinlock in struct hidraw to protect list from concurrent access. Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-26staging: usbip: use DEVICE_ATTR_RO/RW for sysfs attributesGreg Kroah-Hartman
It's easier to audit the sysfs files if they use the RO/RW macros, so convert the usbip code to them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26proc: Restrict mounting the proc filesystemEric W. Biederman
Don't allow mounting the proc filesystem unless the caller has CAP_SYS_ADMIN rights over the pid namespace. The principle here is if you create or have capabilities over it you can mount it, otherwise you get to live with what other people have mounted. Andy pointed out that this is needed to prevent users in a user namespace from remounting proc and specifying different hidepid and gid options on already existing proc mounts. Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-08-26rt2800: fix wrong TX power compensationStanislaw Gruszka
We should not do temperature compensation on devices without EXTERNAL_TX_ALC bit set (called DynamicTxAgcControl on vendor driver). Such devices can have totally bogus TSSI parameters on the EEPROM, but still threaded by us as valid and result doing wrong TX power calculations. This fix inability to connect to AP on slightly longer distance on some Ralink chips/devices. Reported-and-tested-by: Fabien ADAM <id2ndr@crocobox.org> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26Update e-mail address for Andrea Merello (resubmit)Andrea Merello
A lot of files contain reference to my old e-mail address. Now I'm going not to read mail from it anymore, so update it with my current address everywhere. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix DEBUG_FS dependency for ath9kSujith Manoharan
Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26zd1201: fix error return codeWei Yongjun
Fix to return -ENOMEM in the memory alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26mwifiex: add missing endian conversionsTobias Waldekranz
Fixes multiple locations where a little endian host is assumed during ser/des of messages sent to/received from the chip. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix TX poll work lockingSujith Manoharan
There is no need to call ath_txq_unlock_complete() in the TX poll routine - frame completion is not done here, so use ath_txq_unlock(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix ASPM workaround usageSujith Manoharan
The PCIE Workaround register (AR_WA/0x4004) is used to handle various hardware quirks. For AR9002 chips, AR_WA_D3_L1_DISABLE is used to prevent the HW from automatically entering L1 state when D3 is enforced. AR_WA_D3_L1_DISABLE has to be enabled for a few AR9280 based cards, mark them based on their PCI subdevice/subvendor IDs and enforce it in ar9002_hw_configpcipowersave(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath5k: debugfs: NULL-terminate stringsDjalal Harouni
Avoid processing garbage data by NULL terminating the strings. Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix ASPM for AR9462Sujith Manoharan
If the L1 entrance latency is not calibrated properly in the EEPROM in WB222 boards, there could be problems in connectivity. Check and correct the calibrated value if it doesn't match the optimal value for WB222, 4us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26mwifiex: drop gratuitous ARP framesAvinash Patil
This patch adds support for dropping gratuitous ARP frames which is requirement for WFA Hotspot2.0. Hotspot2.0 capability is enabled in driver if extended capabilities IE from BSS descriptor has 11u interworking enabled. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26mwifiex: fix ext_capab IE structure definitionAvinash Patil
EXT_CAPAB_IE format involves IEEE header followed by bytestream of capabilities. Current structure has incorrect member u8 for data; fix it by defining it as u8[0]. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26mwifiex: fix driver unload problem for usb chipsetsAmitkumar Karwar
We have usb_deregister() call in our rmmod routine. deauth, shutdown etc. commands will be sent to FW later when bus driver calls disconnect handler. This mechanism works fine with SDIO and PCIe interfaces, but there is an issue with USB. USB bus driver returns all URBs submitted for receiving data and command response immediately after usb_deregister() with failure status. Hence we don't send deauth, shutdown etc. command to firmware. The problem is fixed by moving code from disconnect handler to rmmod routine for USB interface. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26b43: call PCIe up and down functionsHauke Mehrtens
Tell the PCIe host core when the wifi is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26bcma: add bcma_core_pci_power_save()Hauke Mehrtens
This enables or disables power saving on the PCIe bus when the wifi is in operation or not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26bcma: do not export bcma_core_pci_extend_L1timer()Hauke Mehrtens
This is not called any more, do not export it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26brcmsmac: use bcma PCIe up and down functionsHauke Mehrtens
replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26bcma: add method to power up and down the PCIe core by wifi driverHauke Mehrtens
The wifi driver should tell the PCIe core that it is now in operation so that some workarounds can be applied and the power state is changed. This should replace the call to bcma_core_pci_extend_L1timer by the brcmsmac driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26bcma: change max PCI read request size to 128Hauke Mehrtens
This PCIe controller does not support a max read request size above 128 bytes. The sold card I tested this controller with used 128 as default value, but some new routers are sold with BCM4331 chips, which have a default max read request size of 512. This device fails at the first DMA reqeust whch is bigger than 126 bytes. This patch changes the max read request size to 128 for every device on the PCIe link. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26rt2x00: rt2800lib: don't hardcode beacon offsetsGabor Juhos
The values written into the BCN_OFFSET[01] registers are hardcoded in the rt2800_init_register function. Add a macro and a helper function to derive these values directly from the base address of a given beacon, and use the new function instead of the hardcoded numbers. The patch contains no functional changes. The programmed register values are the same before and after the patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26rt2x00: rt2800lib: add rt2800_hw_beacon_base helperGabor Juhos
The HW_BEACON_BASE() macro returns the base address of a given beacon, however the returned values are not usable on all chipsets. On devices which have selectable shared memory parts, some beacon may be located in the high part of the shared memory. Instead of extending the already complicated macro, add a new helper function and use that to get the base address of a given beacon. The actual patch contains no functional changes, the helper function will be extended in a further patch to handle different chipsets' requirements. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26PCI: Fix MPS peer-to-peer DMA comment syntaxJon Mason
Correct minor wording issue in MPS peer-to-peer comment. Noticed by Don Dutile. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-26Input: add driver for slidebar on Lenovo IdeaPad laptopsAndrey Moiseev
This driver adds support for slidebars found on some Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop Navigator under Windows). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004 Registers 'IdeaPad Slidebar' input device and /sys/devices/platform/ideapad_slidebar/slidebar_mode for switching slidebar's modes. Now works on: IdeaPad Y550, Y550P. May work on (testing and adding new models is needed): Ideapad Y560, Y460, Y450, Y650, and, probably, some others. Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26xfs: check for underflow in xfs_iformat_fork()Dan Carpenter
The "di_size" variable comes from the disk and it's a signed 64 bit. We check the upper limit but we should check for negative numbers as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-26xfs: xfs_dir3_sfe_put_ino can be staticFengguang Wu
TO: Dave Chinner <david@fromorbit.com> CC: Ben Myers <bpm@sgi.com> CC: linux-kernel@vger.kernel.org Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-26mmc: esdhc: add support to get voltage from device-treeHaijun Zhang
Add suppport to get voltage from device-tree node for esdhc host, if voltage-ranges was specified in device-tree node we can get ocr_mask instead of read from host capacity register. If not voltages still can be get from host capacity register. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: sdhci: get voltage from sdhc hostHaijun Zhang
We use host->ocr_mask to hold the voltage get from device-tree node, In case host->ocr_mask was available, we use host->ocr_mask as the final available voltage can be used by MMC/SD/SDIO card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit (git 2.34.1) at 2025-10-03 04:32:36 +0000