| Age | Commit message (Collapse) | Author |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
|
|
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
|
|
Unlike virtio_balloon/virtio_mem/xen balloon drivers, Hyper-V balloon driver
does not adjust managed pages count when ballooning/un-ballooning and this leads
to incorrect stats being reported, e.g. unexpected 'free' output.
Note, the calculation in post_status() seems to remain correct: ballooned out
pages are never 'available' and we manually add dm->num_pages_ballooned to
'commited'.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201202161245.2406143-3-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
'alloc_unit' in alloc_balloon_pages() is either '512' for 2M allocations or
'1' for 4k allocations. So
1 << get_order(alloc_unit << PAGE_SHIFT)
equals to 'alloc_unit' and the for loop basically sets all them offline.
Simplify the math to improve the readability.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201202161245.2406143-2-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
On shutdown the driver core calls the bus' shutdown callback also for
unbound devices. A driver's shutdown callback however is only called for
devices bound to this driver. Commit 9c30921fe799 ("driver core:
platform: use bus_type functions") changed the platform bus from driver
callbacks to bus callbacks, so the shutdown function must be prepared to
be called without a driver. Add the corresponding check in the shutdown
function.
Fixes: 9c30921fe799 ("driver core: platform: use bus_type functions")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201212235533.247537-1-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the !CONFIG_GENERIC_CMOS_UPDATE case the update_persistent_clock64() function
gets defined as a stub in ntp.c - make the prototype in <linux/timekeeping.h>
conditional on CONFIG_GENERIC_CMOS_UPDATE as well.
Fixes: 76e87d96b30b5 ("ntp: Consolidate the RTC update implementation")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
According to the X.25 documentation, there was a plan to implement
X.25-over-802.2-LLC. It never finished but left various code stubs in the
X.25 code. At this time it is unlikely that it would ever finish so it
may be better to remove those code stubs.
Also change the documentation to make it clear that this is not a ongoing
plan anymore. Change words like "will" to "could", "would", etc.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201209033346.83742-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On a few of our systems, I found frequent 'unshare(CLONE_NEWNET)' calls
make the number of active slab objects including 'sock_inode_cache' type
rapidly and continuously increase. As a result, memory pressure occurs.
In more detail, I made an artificial reproducer that resembles the
workload that we found the problem and reproduce the problem faster. It
merely repeats 'unshare(CLONE_NEWNET)' 50,000 times in a loop. It takes
about 2 minutes. On 40 CPU cores / 70GB DRAM machine, the available
memory continuously reduced in a fast speed (about 120MB per second,
15GB in total within the 2 minutes). Note that the issue don't
reproduce on every machine. On my 6 CPU cores machine, the problem
didn't reproduce.
'cleanup_net()' and 'fqdir_work_fn()' are functions that deallocate the
relevant memory objects. They are asynchronously invoked by the work
queues and internally use 'rcu_barrier()' to ensure safe destructions.
'cleanup_net()' works in a batched maneer in a single thread worker,
while 'fqdir_work_fn()' works for each 'fqdir_exit()' call in the
'system_wq'. Therefore, 'fqdir_work_fn()' called frequently under the
workload and made the contention for 'rcu_barrier()' high. In more
detail, the global mutex, 'rcu_state.barrier_mutex' became the
bottleneck.
This commit avoids such contention by doing the 'rcu_barrier()' and
subsequent lightweight works in a batched manner, as similar to that of
'cleanup_net()'. The fqdir hashtable destruction, which is done before
the 'rcu_barrier()', is still allowed to run in parallel for fast
processing, but this commit makes it to use a dedicated work queue
instead of the 'system_wq', to make sure that the number of threads is
bounded.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201211112405.31158-1-sjpark@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If interrupt trigger is not set when requesting the interrupt, the core
will take care of reading trigger type from Devicetree. There is no
point to do it in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7530 has a global RX length register, so we are actually changing its
MRU.
Enable MTU normalization for this reason.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in drivers:
- hisi_sas: fix internal queue timeout
- be2iscsi: revert a prior fix causing problems
- bnx2i: add missing dependency
- storvsc: late arriving revert of a problem fix
and one in the core.
The core one is a minor change to stop paying attention to the busy
count when returning out of resources because there's a race window
where the queue might not restart due to missing returning I/O"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
scsi: hisi_sas: Select a suitable queue for internal I/Os
scsi: core: Fix race between handling STS_RESOURCE and completion
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
scsi: bnx2i: Requires MMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Bugfix for the AT24 EEPROM driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
misc: eeprom: at24: fix NVMEM name with custom AT24 device name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-12-12
Just one patch this time:
1) Redact the SA keys with kernel lockdown confidentiality.
If enabled, no secret keys are sent to uuserspace.
From Antony Antony.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: redact SA secret with lockdown confidentiality
====================
Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
Second set of patches for v5.11. iwlwifi gaining support for the new
6 GHz band and rtw88 got a new channel. Lots of new features for mt76
and ath11k now has working suspend for PCI devices. And as always,
smaller fixes and cleanups all over.
Major changes:
rtw88
* add support for channel 144
mt76
* support for more sta interfaces on mt7615/mt7915
* mt7915 encapsulation offload
* performance improvements
* channel noise report on mt7915
* mt7915 testmode support
* mt7915 DBDC support
iwlwifi
* support 6 GHz band
ath11k
* suspend support for QCA6390 PCI devices
* support TXOP duration based RTS threshold
* mesh: add support for 256 bitmap in blockack frames in 11ax
* tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits)
ath11k: implement suspend for QCA6390 PCI devices
ath11k: hif: add ce irq enable and disable functions
ath11k: implement WoW enable and wakeup commands
ath11k: set credit_update flag for flow controlled ep only
ath11k: dp: stop rx pktlog before suspend
ath11k: htc: implement suspend handling
ath11k: htc: remove unused struct ath11k_htc_ops
ath11k: pci: read select_window register to ensure write is finished
ath11k: hif: implement suspend and resume functions
ath11k: mhi: hook suspend and resume
ath11k: Fix incorrect tlvs in scan start command
ath11k: pci: disable VDD4BLOW
ath11k: pci: fix L1ss clock unstable problem
ath11k: pci: fix hot reset stability issues
ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID
ath11k: mhi: print a warning if firmware crashed
ath11k: use MHI provided APIs to allocate and free MHI controller
ath10k: add atomic protection for device recovery
ath10k: add option for chip-id based BDF selection
mt76: remove unused variable q
...
====================
Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds three new netlink attributes to encapsulate a list of
expressions per set elements:
- NFTA_SET_EXPRESSIONS: this attribute provides the set definition in
terms of expressions. New set elements get attached the list of
expressions that is specified by this new netlink attribute.
- NFTA_SET_ELEM_EXPRESSIONS: this attribute allows users to restore (or
initialize) the stateful information of set elements when adding an
element to the set.
- NFTA_DYNSET_EXPRESSIONS: this attribute specifies the list of
expressions that the set element gets when it is inserted from the
packet path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch replaces NFT_SET_EXPR by NFT_SET_EXT_EXPRESSIONS. This new
extension allows to attach several expressions to one set element (not
only one single expression as NFT_SET_EXPR provides). This patch
prepares for support for several expressions per set element in the
netlink userspace API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 8410d38c2552 ("loop: use __register_blkdev to allocate devices on
demand") simplified loop_init(); so computing the range of the block region
is not required anymore and can be dropped.
Drop dead assignments in loop_init().
As compilers will detect these unneeded assignments and optimize this,
the resulting object code is identical before and after this change.
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Delay to wait for queue running is milli second unit which is passed to
delayed work via msecs_to_jiffies() which is to convert milliseconds to
jiffies.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update mis-named argument description of blk_mq_map_queue(). This patch
also updates description that argument to software queue percpu context.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
tagset->set is allocated from blk_mq_alloc_tag_set() rather than being
reallocated. This patch added a helper to make its meaning explicitly
which is to allocate rather than to reallocate.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The in_interrupt() check in sr_init_command() is a leftover from the
past, pre v2.3.16 era to be exact. Back then the ioctl() was served by
`sr' itself and sector size changes by CDROMREADMODE2 (as noted in the
comment) were accounted within sr's data structures which allowed a
"lazy" reset so it could be skipped on the next request and reset back
to the default value once the device node was closed or before a command
from the blockqueue was issued.
This does not work like that anymore. The CDROMREADMODE2 is served by
cdrom's mmc_ioctl() function which may change the sector size but the
`sr' driver does not learn about it and so its ->sector_size is not
updated.
The ioctl() resets the changed sector size back to 2048.
sr_read_sector() also resets the sector size back to the default once it
is done.
Remove the conditional sector size update from sr_init_command() and
sr_release() because it is not needed.
Link: https://lkml.kernel.org/r/20201204164803.ovwurzs3257em2rp@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sr_read_sector() is hardly used since v2.3.16. Its only purpose is to
check if it is a XA medium via sr_is_xa(). This check is only enabled if
the module parameter `xa_test' is enabled.
Change the sector size back to 2048 if it was changed. With this change,
there is no lazy sector size changing left.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In v2.4.0-test2pre2 mmc_ioctl_cdrom_read_data() was extended by issuing
a MODE_SELECT opcode to change the sector size and READ_10 to perform
the actual read if the READ_CD opcode is not support.
The sector size is never changed back to the previous value of 2048
bytes which is however denoted by the comment for version 3.09 of the
cdrom.c file.
Use cdrom_switch_blocksize() to change the sector size only if the
requested size deviates from 2048. Change it back to 2048 after the read
operation if a change was mode.
Link: https://lkml.kernel.org/r/20201204164803.ovwurzs3257em2rp@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools/kvm_stat: Exempt time-based counters
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
kvm: x86/mmu: Use cpuid to determine max gfn
kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
selftests: kvm/set_memory_region_test: Fix race in move region test
KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
KVM: arm64: Fix handling of merging tables into a block entry
KVM: arm64: Fix memory leak on stage2 update of a valid PTE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A new set of wireless changes:
* validate key indices for key deletion
* more preamble support in mac80211
* various 6 GHz scan fixes/improvements
* a common SAR power limitations API
* various small fixes & code improvements
* tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
mac80211: add ieee80211_set_sar_specs
nl80211: add common API to configure SAR power limitations
mac80211: fix a mistake check for rx_stats update
mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc
mac80211: Update rate control on channel change
mac80211: don't filter out beacons once we start CSA
mac80211: Fix calculation of minimal channel width
mac80211: ignore country element TX power on 6 GHz
mac80211: use bitfield helpers for BA session action frames
mac80211: support Rx timestamp calculation for all preamble types
mac80211: don't set set TDLS STA bandwidth wider than possible
mac80211: support driver-based disconnect with reconnect hint
cfg80211: support immediate reconnect request hint
mac80211: use struct assignment for he_obss_pd
cfg80211: remove struct ieee80211_he_bss_color
nl80211: validate key indexes for cfg80211_registered_device
cfg80211: include block-tx flag in channel switch started event
mac80211: disallow band-switch during CSA
ieee80211: update reduced neighbor report TBTT info length
cfg80211: Save the regulatory domain when setting custom regulatory
...
====================
Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
|
|
Pull io_uring fixes from Jens Axboe:
"Two fixes in here, fixing issues introduced in this merge window"
* tag 'io_uring-5.10-2020-12-11' of git://git.kernel.dk/linux-block:
io_uring: fix file leak on error path of io ctx creation
io_uring: fix mis-seting personality's creds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for cm109 stomping on its own control URB if it tries to toggle
buzzer immediately after userspace opens input device (found by
syzcaller)
- another fix for Raydium touchscreens that do not like splitting
command transfers
- quirks for i8042, soc_button_array, and goodix drivers to make them
work better with certain hardware.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
Input: cm109 - do not stomp on control URB
Input: i8042 - add Acer laptops to the i8042 reset list
Input: cros_ec_keyb - send 'scancodes' in addition to key events
Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
Input: raydium_ts_i2c - do not split tx transactions
|
|
Commit e2782f560c29 ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit
e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10"):
In file included from ./include/linux/kernel.h:14,
from ./include/asm-generic/bug.h:20,
from ./arch/x86/include/asm/bug.h:93,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
^~~~~~~~~~~~
Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'. Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.
Reported-by: Song Liu <songliubraving@fb.com>
Fixes: e2782f560c29 ("Revert "dm raid: remove unnecessary discard limits for raid10"")
Fixes: e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10")
Cc: stable@vger,kernel.org # e0910c8e4f87 was marked for stable@
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document device tree bindings for AMD SB-TSI emulated temperature
sensor.
Signed-off-by: Kun Yi <kunyi@google.com>
Link: https://lore.kernel.org/r/20201211215427.3281681-4-kunyi@google.com
Reviewed-by: Rob Herring <robh@kernel.org>
[groeck: Fixed subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document the SB-TSI sensor interface driver.
Signed-off-by: Kun Yi <kunyi@google.com>
Link: https://lore.kernel.org/r/20201211215427.3281681-3-kunyi@google.com
[groeck: Added SPDX license identifier, same as source]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible
interface that reports AMD SoC's Ttcl (normalized temperature),
and resembles a typical 8-pin remote temperature sensor's I2C interface
to BMC.
This commit adds basic support using this interface to read CPU
temperature, and read/write high/low CPU temp thresholds.
To instantiate this driver on an AMD CPU with SB-TSI
support, the i2c bus number would be the bus connected from the board
management controller (BMC) to the CPU. The i2c address is specified in
Section 6.3.1 of the spec [1]: The SB-TSI address is normally 98h for
socket 0 and 90h for socket 1, but it could vary based on hardware address
select pins.
[1]: https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
Test status: tested reading temp1_input, and reading/writing
temp1_max/min.
Signed-off-by: Kun Yi <kunyi@google.com>
Link: https://lore.kernel.org/r/20201211215427.3281681-2-kunyi@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The TIF_NOTIFY_SIGNAL based implementation of TWA_SIGNAL is always safe
to use, regardless of context, as we won't be recursing into the signal
lock. So now that all archs are using that, we can drop this deadlock
work-around as it's always safe to use TWA_SIGNAL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's available everywhere now, no need to check or add dummy defines.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's no longer used, get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the dead code, TWA_SIGNAL will never set JOBCTL_TASK_WORK at
this point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All archs now support TIF_NOTIFY_SIGNAL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for sparc.
Cc: sparclinux@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for riscv.
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for nds32.
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for ia64.
Cc: linux-ia64@vger.kernel.org
[axboe: added fixes from Mike Rapoport <rppt@kernel.org>]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for h8300.
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for c6x.
Cc: linux-c6x-dev@linux-c6x.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up TIF_NOTIFY_SIGNAL handling for alpha.
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit
7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.
Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.
[ bp: Massage commit message. ]
Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Reported-by: Adam Zabrocki <pi3@pi3.com.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Fix error handling if no clock is available on dw_apb_timer_of (Dinh Nguyen)
- Fix overhead for erratum handling when the timer has no erratum and
fix fault programing for the event stream on the arm arch timer
(Keqian Zhu)
- Fix potential deadlock when calling runtime PM on sh_cmt (Niklas
Söderlund)
|
|
Commit 01bb86b380a3 ("driver core: Add fwnode_init()") was supposed to
fix up all instances of fwnode creation to use fwnode_init(). But looks
like this instance was missed. This causes a NULL pointer dereference
during device_add() [1]. So, fix it.
[ 60.792324][ T1] Call trace:
[ 60.795495][ T1] device_add+0xf60/0x16b0
__fw_devlink_link_to_consumers at drivers/base/core.c:1583
(inlined by) fw_devlink_link_device at drivers/base/core.c:1726
(inlined by) device_add at drivers/base/core.c:3088
[ 60.799813][ T1] platform_device_add+0x274/0x628
[ 60.804833][ T1] acpi_iort_init+0x9d8/0xc50
[ 60.809415][ T1] acpi_init+0x45c/0x4e8
[ 60.813556][ T1] do_one_initcall+0x170/0xb70
[ 60.818224][ T1] kernel_init_freeable+0x6a8/0x734
[ 60.823332][ T1] kernel_init+0x18/0x12c
[ 60.827566][ T1] ret_from_fork+0x10/0x1c
[ 60.838756][ T1] ---[ end trace fa5c8ce17a226d83 ]---
[1] - https://lore.kernel.org/linux-arm-kernel/02e7047071f0b54b046ac472adeeb3fafabc643c.camel@redhat.com/
Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()")
Reported-by: Qian Cai <qcai@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201211202629.2164655-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We have a problem if we use gpio-keys and configure wakeups such that
we only want one edge to wake us up. AKA:
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
Specifically we end up with a phantom interrupt that blocks suspend if
the line was already high and we want wakeups on rising edges (AKA we
want the GPIO to go low and then high again before we wake up). The
opposite is also problematic.
Specifically, here's what's happening today:
1. Normally, gpio-keys configures to look for both edges. Due to the
current workaround introduced in commit c3c0c2e18d94 ("pinctrl:
qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
line was high we'd configure for falling edges.
2. At suspend time, we change to look for rising edges.
3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.
We can solve this by just clearing the phantom interrupt.
NOTE: it is possible that this could cause problems for a client with
very specific needs, but there's not much we can do with this
hardware. As an example, let's say the interrupt signal is currently
high and the client is looking for falling edges. The client now
changes to look for rising edges. The client could possibly expect
that if the line has a short pulse low (and back high) that it would
always be detected. Specifically no matter when the pulse happened,
it should either have tripped the (old) falling edge trigger or the
(new) rising edge trigger. We will simply not trip it. We could
narrow down the race a bit by polling our parent before changing
types, but no matter what we do there will still be a period of time
where we can't tell the difference between a real transition (or more
than one transition) and the phantom.
Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid
|
