| Age | Commit message (Collapse) | Author |
|---|
|
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We use rcu_assign_pointer to assign both the table and the entries,
but the entries are not marked as __rcu. This generates sparse
warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 0a4e9ce17ba77847e5a9f87eed3c0ba46e3f82eb.
The code was developed and tested on an MSC313E SoC, which seems to be
half-way between the AT91RM9200 and the AT91SAM9260 in that it supports
both the 2-descriptors mode and a Tx ring.
It turns out that after the code was merged I could notice that the
controller would sometimes lock up, and only when dealing with sustained
bidirectional transfers, in which case it would report a Tx overrun
condition right after having reported being ready, and will stop sending
even after the status is cleared (a down/up cycle fixes it though).
After adding lots of traces I couldn't spot a sequence pattern allowing
to predict that this situation would happen. The chip comes with no
documentation and other bits are often reported with no conclusive
pattern either.
It is possible that my change is wrong just like it is possible that
the controller on the chip is bogus or at least unpredictable based on
existing docs from other chips. I do not have an RM9200 at hand to test
at the moment and a few tests run on a more recent 9G20 indicate that
this code path cannot be used there to test the code on a 3rd platform.
Since the MSC313E works fine in the single-descriptor mode, and that
people using the old RM9200 very likely favor stability over performance,
better revert this patch until we can test it on the original platform
this part of the driver was written for. Note that the reverted patch
was actually tested on MSC313E.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packets sent by rmnet to the real device have variable MAP header
lengths based on the data format configured. This patch adds checks
to ensure that the real device MTU is sufficient to transmit the MAP
packet comprising of the MAP header and the IP packet. This check
is enforced when rmnet devices are created and updated and during
MTU updates of both the rmnet and real device.
Additionally, rmnet devices now have a default MTU configured which
accounts for the real device MTU and the headroom based on the data
format.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test program udpgso_bench_rx always invokes the poll()
syscall with a timeout of 10ms. If a larger timeout is specified
via the command line, udpgso_bench_rx is supposed to do multiple
poll() calls till the timeout is expired or an event is received.
Currently the poll() loop errors out after the first invocation with
no events, and may causes self-tests failure alike:
failed
GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1
This change addresses the issue allowing the poll() loop to consume
all the configured timeout.
Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow the rule taken in commit 35bd8c07db2c ("devres: keep both device
name and resource name in pretty name") and keep both device and resource
names while requesting memory regions for PCI config space to prettify e.g.
/proc/iomem output:
Before (DWC Host Controller):
18b00000-18b01fff : dbi
18b10000-18b11fff : config
18b20000-18b21fff : dbi
18b30000-18b31fff : config
After:
18b00000-18b01fff : 18b00000.pci dbi
18b10000-18b11fff : 18b00000.pci config
18b20000-18b21fff : 18b20000.pci dbi
18b30000-18b31fff : 18b20000.pci config
Link: https://lore.kernel.org/r/WbKfdybjZ6xNIUjcC5oC8NcuLqrJfkxQAlnO80ag@cp3-web-020.plabs.ch
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
(dis)connected
When the upper layer instruct us to connect (or disconnect), but we have
already connected (or disconnected), consider this operation successful
rather than failed.
This can help the upper layer to correct its record about whether we are
connected or not here in layer 2.
The upper layer may not have the correct information about whether we are
connected or not. This can happen if this driver has already been running
for some time when the "x25" module gets loaded.
Another X.25 driver (hdlc_x25) is already doing this, so we make this
driver do this, too.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new device ID for the next step of the silicon and
reflect the I226_K part.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:
7: (61) r1 = *(u32 *)(r0 +0)
Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...
8: (65) if r1 s> 0xffffffff goto pc+1
... therefore this is always true (the operand is sign-extended).
10: (b4) w2 = 11
11: (6d) if r2 s> r1 goto pc+1
When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].
13: (64) w1 <<= 2
Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.
14: (0f) r0 += r1
15: (7a) *(u64 *)(r0 +0) = 4
Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A prior patch increased the size of struct tcp_zerocopy_receive
but did not update do_tcp_getsockopt() handling to properly account
for this.
This patch simply reintroduces content erroneously cut from the
referenced prior patch that handles the new struct size.
Fixes: 18fb76ed5386 ("net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not clear what this lock protects. If the authors wanted to ensure
that "dev" does not disappear, that is impossible, given the following
code path:
mlx4_ib_netdev_event (under RTNL mutex)
-> mlx4_ib_scan_netdevs
-> mlx4_ib_update_qps
Also, the dev_base_lock does not protect dev->dev_addr either.
So it serves no purpose here. Remove it.
Link: https://lore.kernel.org/r/20201208193928.1500893-1-vladimir.oltean@nxp.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Removed unused ".bus_shift" initialisers from pci-xgene.c as
xgene_pcie_map_bus() did not use these.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201129230743.3006978-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Use "void __iomem" instead "char __iomem" pointer type when working with
the accessor functions (with names like readb() or writel(), etc.) to
better match a given accessor function signature where commonly the address
pointing to an I/O memory region would be a "void __iomem" pointer.
Related: https://lwn.net/Articles/102232/
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201129230743.3006978-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
|
|
Change interface of the function iproc_pcie_map_ep_cfg_reg() so that use
of PCI_SLOT() and PCI_FUNC() macros and most of the local ECAM-specific
constants can be dropped, and the new PCIE_ECAM_OFFSET() macro can be
used instead. Use the ALIGN_DOWN() macro to ensure that PCI Express
ECAM offset is always 32 bit aligned.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201129230743.3006978-4-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add a custom constant for the ".bus_shift" initialiser to capture a
non-standard platform-specific ECAM bus shift value.
Standard values otherwise defined in the PCI Express Specification are
available in the include/linux/pci-ecam.h.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201129230743.3006978-3-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add ECAM-related constants to provide a set of standard constants
defining memory address shift values to the byte-level address that can
be used to access the PCI Express Configuration Space, and then move
native PCI Express controller drivers to use the newly introduced
definitions retiring driver-specific ones.
Refactor pci_ecam_map_bus() function to use newly added constants so
that limits to the bus, device function and offset (now limited to 4K as
per the specification) are in place to prevent the defective or
malicious caller from supplying incorrect configuration offset and thus
targeting the wrong device when accessing extended configuration space.
This refactor also allows for the ".bus_shift" initialisers to be
dropped when the user is not using a custom value as a default value
will be used as per the PCI Express Specification.
Thanks to Qian Cai <qcai@redhat.com>, Michael Walle <michael@walle.cc>,
and Vladimir Oltean <olteanv@gmail.com> for reporting a pci_ecam_create()
issue with .bus_shift and to Vladimir for proposing the fix.
[bhelgaas: incorporate Vladimir's fix, update commit log]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20201129230743.3006978-2-kw@linux.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-12-10
here's a pull request of 7 patches for net-next/master.
The first patch is by Oliver Hartkopp for the CAN ISOTP, which adds support for
functional addressing.
A patch by Antonio Quartulli removes an unneeded unlikely() annotation from the
rx-offload helper.
The next three patches target the m_can driver. Sean Nyekjaers's patch removes
a double clearing of clock stop request bit, Patrik Flykt's patch moves the
runtime PM enable/disable to m_can_platform and Jarkko Nikula's patch adds a
PCI glue code driver.
Fabio Estevam's patch converts the flexcan driver to DT only.
And Manivannan Sadhasivam's patchd for the mcp251xfd driver adds internal
loopback mode support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are systems (for example, Intel based mobile platforms since Coffee
Lake) where the power drawn while suspended can be significantly reduced by
disabling Precision Time Measurement (PTM) on PCIe root ports as this
allows the port to enter a lower-power PM state and the SoC to reach a
lower-power idle state. To save this power, disable the PTM feature on root
ports during pci_prepare_to_sleep() and pci_finish_runtime_suspend(). The
feature will be returned to its previous state during restore and error
recovery.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361
Link: https://lore.kernel.org/r/20201207223951.19667-2-david.e.box@linux.intel.com
Reported-by: Len Brown <len.brown@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The PCI subsystem does not currently save and restore the configuration
space for the Precision Time Measurement (PTM) Extended Capability leading
to the possibility of the feature returning disabled on S3 resume. This
has been observed on Intel Coffee Lake desktops. Add save/restore of the
PTM control register. This saves the PTM Enable, Root Select, and Effective
Granularity bits.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20201207223951.19667-1-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new compatible strings to the DT binding documents to support SiFive
FU740-C000.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add compatible string for AM64 SoC in device tree binding of OMAP I2C
modules as the same IP is used.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages
using cma") added support for allocating gigantic hugepages using CMA,
by specifying the hugetlb_cma= kernel parameter, which will disable any
boot-time allocation of gigantic hugepages.
This patch enables that option also for s390.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The random longs to be pulled by arch_get_random_long() are
prepared in an 4K buffer which is filled from the NIST 800-90
compliant s390 drbg. By default the random long buffer is refilled
256 times before the drbg itself needs a reseed. The reseed of the
drbg is done with 32 bytes fetched from the high quality (but slow)
trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256
bits of entropy are spread over 256 * 4KB = 1MB serving 131072
arch_get_random_long() invocations before reseeded.
How often the 4K random long buffer is refilled with the drbg
before the drbg is reseeded can be adjusted. There is a module
parameter 's390_arch_rnd_long_drbg_reseed' accessible via
/sys/module/arch_random/parameters/rndlong_drbg_reseed
or as kernel command line parameter
arch_random.rndlong_drbg_reseed=<value>
This parameter tells how often the drbg fills the 4K buffer before
it is re-seeded by fresh entropy from the trng.
A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64
KB with 32 bytes of fresh entropy pulled from the trng. So a value
of 16 would result in 256 bits entropy per 64 KB.
A value of 256 results in 1MB of drbg output before a reseed of the
drbg is done. So this would spread the 256 bits of entropy among 1MB.
Setting this parameter to 0 forces the reseed to take place every
time the 4K buffer is depleted, so the entropy rises to 256 bits
entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With
setting this parameter to negative values all this effort is
disabled, arch_get_random long() returns false and thus indicating
that the arch_get_random_long() feature is disabled at all.
arch_get_random_long() is used by random.c among others to provide
an initial hash value to be mixed with the entropy pool on every
random data pull. For about 64 bytes read from /dev/urandom there
is one call to arch_get_random_long(). So these additional random
long values count for performance of /dev/urandom with measurable
but low penalty.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove the the redundant 'of_match_ptr' macro to fix below warning
when the CONFIG_OF is not selected.
All warnings:
drivers/hwspinlock/sirf_hwspinlock.c:87:34: warning: unused variable
'sirf_hwpinlock_ids' [-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/250d35cb489c3c4c066f7ce256d27f36712a1979.1591618255.git.baolin.wang7@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Reads the IPI buffer offset from the FW binary. The information resides
in addr of .ipi_buffer section.
Moves scp_ipi_init() to rproc_ops::parse_fw() phase. The IPI buffer can
be initialized only if the offset is clear.
To backward compatible to MT8183 SCP, specify the offset in the board
specific mtk_scp_of_data. Reads the default offset if the firmware
doesn't have it.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201202044609.2501913-1-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fixes the error handling to unprepare clk if scp_before_load fails.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203155914.3844426-1-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
platform_get_resource() may fail and in this case a NULL dereference
will occur.
Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607392460-20516-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Kernel test robot throws below warning ->
>> drivers/remoteproc/mtk_scp.c:755:37: warning: unused variable
>> 'mt8183_of_data' [-Wunused-const-variable]
static const struct mtk_scp_of_data mt8183_of_data = {
^
>> drivers/remoteproc/mtk_scp.c:765:37: warning: unused variable
>> 'mt8192_of_data' [-Wunused-const-variable]
static const struct mtk_scp_of_data mt8192_of_data = {
^
As suggested by Bjorn, there's no harm in just dropping the
of_match_ptr() wrapping of mtk_scp_of_match in the definition of
mtk_scp_driver and we avoid this whole problem.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1606513855-21130-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In case of error, the function devm_ioremap_wc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 6edbe024ba17 ("remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200905122503.17352-1-yuehaibing@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
If the pm_runtime_get_sync failed in adsp_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.
2) Have not reset pds[i] performance state.
Then we fix it.
Fixes: 17ee2fb4e8567 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143554.144707-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in adsp_start, so we should fix it.
Fixes: dc160e4491222 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143534.144484-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
If the pm_runtime_get_sync failed in q6v5_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.
2) Have not reset pds[i] performance state.
Then we fix it.
Fixes: 4760a896be88e ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Now that this driver can be compiled with COMPILE_TEST, we have no
guarantee that CONFIG_OF will also be defined. When that happens, a
warning about mtk_scp_of_match being defined but unused will be reported
so make sure this variable is only defined if of_match_ptr() actually
uses it.
Fixes: cbd2dca74926c0e4610c40923cc786b732c9e8ef remoteproc: scp: add COMPILE_TEST dependency
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Link: https://lore.kernel.org/r/20201102074007.299222-1-acourbot@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add minidump id for modem in sm8150 chipset so that the regions to be
included in the coredump generated upon a crash is based on the minidump
tables in SMEM instead of those in the ELF header.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by, Reviewed-by or Tested-by that you received previously.:
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-5-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This patch adds support for collecting minidump in the event of remoteproc
crash. Parse the minidump table based on remoteproc's unique minidump-id,
read all memory regions from the remoteproc's minidump table entry and
expose the memory to userspace. The remoteproc platform driver can choose
to collect a full/mini dump by specifying the coredump op.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Co-developed-by: Gurbir Arora <gurbaror@codeaurora.org>
Signed-off-by: Gurbir Arora <gurbaror@codeaurora.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-4-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This change adds a new kind of core dump mechanism which instead of dumping
entire program segments of the firmware, dumps sections of the remoteproc
memory which are sufficient to allow debugging the firmware. This function
thus uses section headers instead of program headers during creation of the
core dump elf.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-3-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Each remoteproc might have different requirements for coredumps and might
want to choose the type of dumps it wants to collect. This change allows
remoteproc drivers to specify their own custom dump function to be executed
in place of rproc_coredump. If the coredump op is not specified by the
remoteproc driver it will be set to rproc_coredump by default.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1605819935-10726-2-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Recently syzbot reported[0] that there is a deadlock amongst the users
of exec_update_mutex. The problematic lock ordering found by lockdep
was:
perf_event_open (exec_update_mutex -> ovl_i_mutex)
chown (ovl_i_mutex -> sb_writes)
sendfile (sb_writes -> p->lock)
by reading from a proc file and writing to overlayfs
proc_pid_syscall (p->lock -> exec_update_mutex)
While looking at possible solutions it occured to me that all of the
users and possible users involved only wanted to state of the given
process to remain the same. They are all readers. The only writer is
exec.
There is no reason for readers to block on each other. So fix
this deadlock by transforming exec_update_mutex into a rw_semaphore
named exec_update_lock that only exec takes for writing.
Cc: Jann Horn <jannh@google.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christopher Yeoh <cyeoh@au1.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex")
[0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com
Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The correct MT8192 CFG register base is 0x20000 off. Changes the
registers accordingly.
Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201210054109.587795-1-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fix incorrect type of max_entries in UVERBS_METHOD_QUERY_GID_TABLE -
max_entries is of type size_t although it can take negative values.
The following static check revealed it:
drivers/infiniband/core/uverbs_std_types_device.c:338 ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE() warn: 'max_entries' unsigned <= 0
Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201208073545.9723-4-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.
As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.
Fix this by advertising the device availability only after enabling the
device succeeds.
Fixes: e7a5b4aafd82 ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The CQ pool mechanism had two problems:
1. The CQ pool lists were uninitialized in the device registration error
flow. As a result, all the list pointers remained NULL. This caused
the kernel to crash (in procedure ib_cq_pool_destroy) when that error
flow was taken (and unregister called). The stack trace snippet:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0×0000) ? not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
. . .
RIP: 0010:ib_cq_pool_destroy+0x1b/0×70 [ib_core]
. . .
Call Trace:
disable_device+0x9f/0×130 [ib_core]
__ib_unregister_device+0x35/0×90 [ib_core]
ib_register_device+0x529/0×610 [ib_core]
__mlx5_ib_add+0x3a/0×70 [mlx5_ib]
mlx5_add_device+0x87/0×1c0 [mlx5_core]
mlx5_register_interface+0x74/0xc0 [mlx5_core]
do_one_initcall+0x4b/0×1f4
do_init_module+0x5a/0×223
load_module+0x1938/0×1d40
2. At device unregister, when cleaning up the cq pool, the cq's in the
pool lists were freed, but the cq entries were left in the list.
The fix for the first issue is to initialize the cq pool lists when the
ib_device structure is allocated for a new device (in procedure
_ib_alloc_device).
The fix for the second problem is to delete cq entries from the pool lists
when cleaning up the cq pool.
In addition, procedure ib_cq_pool_destroy() is renamed to the more
appropriate name ib_cq_pool_cleanup().
Fixes: 4aa1615268a8 ("RDMA/core: Fix ordering of CQ pool destruction")
Link: https://lore.kernel.org/r/20201208073545.9723-2-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two user triggerable crashers and a some EFA related regressions:
- Syzkaller found a bug in CM
- Restore access to the GID table and fix modify_qp for EFA
- Crasher in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
RDMA/core: Fix empty gid table for non IB/RoCE devices
RDMA/efa: Use the correct current and new states in modify QP
RDMA/qedr: iWARP invalid(zero) doorbell address fix
|
