| Age | Commit message (Collapse) | Author |
|---|
|
Device tree maintainers prefer all single entry cases to be grouped
under an enum. Furthermore, alphanumeric ordering is easier for the
majority of people to understand than ordering by release, which is
quirky.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250506133118.1011777-4-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
It turns out that some instances of the HSP block on Tegra264 can have
up to 16 shared interrupts, so bump the maximum number of allowed
interrupts.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250506133118.1011777-3-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add bindings for the Memory Controller (MC) and External Memory
Controller (EMC) found on the Tegra264 SoC. Tegra264 SoC has a different
number of interrupt lines for MC sub-units: UCF_SOC, hub, hub common,
syncpoint and MC channel. The total number of interrupt lines is eight.
Update maxItems for MC interrupts accordingly.
This also adds a header containing the memory client ID definitions that
are used by the interconnects property in DT and the tegra_mc_client
table in the MC driver. These IDs are defined by the hardware, so the
numbering doesn't start at 0 and contains holes. Also added are the
stream IDs for various hardware blocks found on Tegra264. These are
allocated as blocks of 256 IDs and each block can be subdivided for
additional fine-grained isolation if needed.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[treding@nvidia.com: add SMMU stream IDs, squash patches]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250709222147.3758356-2-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The PMC found on Tegra264 is similar to the version in earlier chips but
some of the register offsets and bitfields differ, so add a specific
compatible string for this new generation.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250506133118.1011777-2-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device tree documentation for rk3576-nanopi-m5
Signed-off-by: John Clark <inindev@gmail.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250628143229.74460-2-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add dt bindings for the Marvell PXA1908 SoC and the Samsung Galaxy Core
Prime VE LTE phone (model number SM-G361F) using the SoC.
The SoC comes with 4 Cortex-A53 cores clocked up to ~1.2GHz and a
Vivante GC7000UL GPU. The phone also has a 4.5" 480x800 touchscreen, 8GB
eMMC and 1GB of LPDDR3 RAM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://lore.kernel.org/r/20250708-pxa1908-lkml-v16-2-b4392c484180@dujemihanovic.xyz
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current pinctrl properties apply only to the pxav1 controller.
Adding one default pinctrl node to a pxav3 controller therefore causes
a schema warning.
Check the existing properties only on pxav1. pxav2 and pxav3 may add
their own set of pinctrl properties if and when needed.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://lore.kernel.org/r/20250708-pxa1908-lkml-v16-1-b4392c484180@dujemihanovic.xyz
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add entries for the JTY D101 tablet and the Lenovo A369i smartphone.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-6-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
JTY produced low-cost Android tablets based on various
MediaTek MT65xx SoCs.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-5-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a compatible string for watchdog on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-4-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a compatible string for sysirq on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-2-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
imx95-libra-rdk-fpsc is a development board based on the phyCORE-i.MX 95
Plus FPSC SoM. Add its description and binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In Aspeed AST2600 design, the MAC internal delay on MAC register cannot
fully reset the RMII interfaces, it may cause the RMII incompletely.
Therefore, we need to add resets property to do SoC-level reset line to
reset the whole MAC function that includes ftgmac, RGMII and RMII.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709070809.2560688-2-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GMAC IP on SG2042 is a standard Synopsys DesignWare MAC
(version 5.00a) with tx clock.
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250708064052.507094-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mt7988 buildin switch has own mdio bus where ge-phys are connected.
Add related property for this.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250709111147.11843-7-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add own dsa-port binding for SoC with internal switch where only phy-mode
'internal' is valid.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250709111147.11843-6-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Meditak Filogic SoCs (MT798x) have dedicated MMIO-SRAM for dma operations.
MT7981 and MT7986 currently use static offset to ethernet MAC register
which will be changed in separate patch once this way is accepted.
Add "sram" property to map ethernet controller to dedicated mmio-sram node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-5-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for MT7988 and RSS/LRO allow the interrupt-names
property.
In this way driver can request the interrupts by name which is much
more readable in the driver code and SoC's dtsi than relying on a
specific order.
Frame-engine-IRQs (fe0..3):
MT7621, MT7628: 1 FE-IRQ
MT7622, MT7623: 3 FE-IRQs (only two used by the driver for now)
MT7981, MT7986: 4 FE-IRQs (only two used by the driver for now)
RSS/LRO IRQs (pdma0..3) additional only on Filogic (MT798x) with
count of 4. So all IRQ-names (8) for Filogic.
Set boundaries for all compatibles same as irq count.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-4-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase the maximum IRQ count to 8 (4 FE + 4 RSS/LRO).
Frame-engine-IRQs (max 4):
MT7621, MT7628: 1 FE-IRQ
MT7622, MT7623: 3 FE-IRQs (only two used by the driver for now)
MT7981, MT7986, MT7988: 4 FE-IRQs (only two used by the driver for now)
Mediatek Filogic SoCs (mt798x) have 4 additional IRQs for RSS and/or
LRO. So MT798x have 8 IRQs in total.
MT7981 does not have a ethernet-node yet.
MT7986 Ethernet node is updated with RSS/LRO IRQs in this series.
MT7988 Ethernet node is added in this series.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7888 have 3 Macs and so its nodes have names from mac0 - mac2. Update
pattern to fix this.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-2-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth:
- stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- rtsn: fix a null pointer dereference in rtsn_probe()"
* tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net/sched: sch_qfq: Fix null-deref in agg_dequeue
rxrpc: Fix oops due to non-existence of prealloc backlog struct
rxrpc: Fix bug due to prealloc collision
MAINTAINERS: remove myself as netronome maintainer
selftests/net: packetdrill: add tcp_ooo-before-and-after-accept.pkt
tcp: refine sk_rcvbuf increase for ooo packets
net/sched: Abort __tc_modify_qdisc if parent class does not exist
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
net: thunderx: avoid direct MTU assignment after WRITE_ONCE()
selftests/tc-testing: Create test case for UAF scenario with DRR/NETEM/BLACKHOLE chain
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atm: clip: Fix infinite recursive call of clip_push().
atm: clip: Fix memory leak of struct clip_vcc.
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
net: phy: smsc: Force predictable MDI-X state on LAN87xx
net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2
rxrpc: Fix over large frame size warning
net: airoha: Fix an error handling path in airoha_probe()
...
|
|
This will be needed to add support for TPS652G1 which also has regulator
dependencies.
|
|
The TPS652G1 is a stripped down version of the TPS65224. From a software
point of view, it lacks any voltage monitoring, the watchdog, the ESM
and the ADC.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250703113153.2447110-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Cadence CSI2RX IP exposes 2 interrupts [0] 12.7 camera subsystem.
So, add support for optional interrupts and interrupt-names properties.
[0]: http://www.ti.com/lit/pdf/spruil1
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The AM62D2 SoC, part of the K3 architecture, is built for high-performance
DSP tasks in automotive audio, pro audio, radar, sonar, and medical
imaging. It features up to four Cortex-A53 cores (1.4GHz), two Cortex-R5F
cores, and a C7x DSP with 2 TOPS MMA. Key interfaces include multi-channel
McASP audio, TSN-capable Gigabit Ethernet, and a range of peripherals
(UART, SPI, I2C, CAN, USB, eMMC/SD, OSPI, CSI). It supports LPDDR4/DDR4,
secure boot with hardware security, and low-power modes with
CAN/GPIO/UART wakeup.
This SoC is of part K3 AM62x family, which includes the AM62A and AM62P
variants. A key distinction is that the AM62D does not include multimedia
components such as the video encoder/decoder, MJPEG encoder, Vision
Processing Accelerator (VPAC) for image signal processing, or the display
subsystem. Additionally, the AM62D has a different pin configuration
compared to the AM62A, which impacts embedded software development.
This adds dt bindings for TI's AM62D2 family of devices.
More details about the SoCs can be found in the Technical Reference Manual:
https://www.ti.com/lit/pdf/sprujd4
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250708085839.1498505-3-p-bhagat@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Some Broadcom PHYs are capable to operate in simplified MII mode,
without TXER, RXER, CRS and COL signals as defined for the MII.
The MII-Lite mode can be used on most Ethernet controllers with full
MII interface by just leaving the input signals (RXER, CRS, COL)
inactive. The absence of COL signal makes half-duplex link modes
impossible but does not interfere with BroadR-Reach link modes on
Broadcom PHYs, because they are all full-duplex only.
Add new interface type "mii-lite" to phy-connection-type enum.
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250708090140.61355-3-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add DT bindings for Microchip Azurite DPLL chip family. These chips
provide up to 5 independent DPLL channels, 10 differential or
single-ended inputs and 10 differential or 20 single-ended outputs.
They can be connected via I2C or SPI busses.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a common DT schema for DPLL device and its associated pins.
The DPLL (device phase-locked loop) is a device used for precise clock
synchronization in networking and telecom hardware.
The device includes one or more DPLLs (channels) and one or more
physical input/output pins.
Each DPLL channel is used either to provide a pulse-per-clock signal or
to drive an Ethernet equipment clock.
The input and output pins have the following properties:
* label: specifies board label
* connection type: specifies its usage depending on wiring
* list of supported or allowed frequencies: depending on how the pin
is connected and where)
* embedded sync capability: indicates whether the pin supports this
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GMAC IP on CV1800 series SoC is a standard Synopsys
DesignWare MAC (version 3.70a).
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250703021220.124195-1-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document support for the Expanded Serial Peripheral Interface (xSPI)
controller found on the Renesas RZ/V2H(P) (R9A09G057) and RZ/V2N
(R9A09G056) SoCs.
The xSPI hardware block on these SoCs is functionally identical to the
one on the RZ/G3E (R9A09G047) SoC. Therefore, the existing driver can be
reused without modification by using `renesas,r9a09g047-xspi` as a
fallback compatible.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250624171605.469724-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The common style in all bindings for enumerating similar variants is to
use 'enum', not 'oneOf', so all boards of same variant or using same SoM
should be grouped under enum. It is more readable, more compact and
makes easier to find actual devices from the same family/type. Also
there is completely no point to repeat the compatible in the description
(incircuit,icnova-a20-adb4006 implies this is "ICnova A20 ADB4006" and
pine64,pinephone-1.2 implies "Pine64 PinePhone (1.2)").
Combine two easily visible cases: ICnova A20 and Pine64 PinePhone.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250706095804.50475-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add myself as the maintainer for the Renesas RSCI device tree binding,
as Thierry Bultel no longer works for Renesas.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630202323.279809-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the RSCI binding to support an optional secondary clock input on
the RZ/T2H SoC. At boot, the RSCI operates using the default synchronous
clock (PCLKM core clock), which is enabled by the bootloader. However, to
support a wider range of baud rates, the hardware also requires an
asynchronous external clock input. Clock selection is controlled
internally by the CCR3 register in the RSCI block.
Due to an incomplete understanding of the hardware, the original binding
defined only a single clock ("fck"), which is insufficient to describe the
full capabilities of the RSCI on RZ/T2H. This update corrects the binding
by allowing up to three clocks and defining the `clock-names` as
"operation", "bus", and optionally "sck" for the asynchronous clock input.
This is an ABI change, as it modifies the expected number and names of
clocks. However, since there are no in-kernel consumers of this binding
yet, the change is considered safe and non-disruptive.
Also remove the unneeded `serial0` alias from the DTS example and use
the R9A09G077_CLK_PCLKM macro for core clock.
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630202323.279809-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
R-Car X5H (R8A78000) SoC has the R-Car Gen5 compatible SCIF and
HSCIF ports, so document the SoC specific bindings.
[Kuninori: tidyup for upstreaming]
Signed-off-by: Nghia Nguyen <nghia.nguyen.jg@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/87ecuxdggq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the RPMh Power Domains on the Milos (e.g. SM7635) SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250707-sm7635-rpmhpd-v2-1-b4aa37acb065@fairphone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
Document the binding for TI K3 BIST (Built-In Self Test) block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250605063506.2005637-2-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add missing 'minItems: 1' to iommus property of the Altera SOCFPGA SoC
implementation of the Synopsys DWMAC.
Fixes: 6d359cf464f4 ("dt-bindings: net: Convert socfpga-dwmac bindings to yaml")
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250707154409.15527-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This ethernet controller is using fixed links for DSA switches
in two already existing device trees, so make sure the checker
does not complain like this:
intel-ixp42x-linksys-wrv54g.dtb: ethernet@c8009000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
intel-ixp42x-usrobotics-usr8200.dtb: ethernet@c800a000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507040609.K9KytWBA-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250704-ixp4xx-ethernet-binding-fix-v1-1-8ac360d5bc9b@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GICv5 interrupt controller architecture is composed of:
- one or more Interrupt Routing Service (IRS)
- zero or more Interrupt Translation Service (ITS)
- zero or more Interrupt Wire Bridge (IWB)
Describe a GICv5 implementation by specifying a top level node
corresponding to the GICv5 system component.
IRS nodes are added as GICv5 system component children.
An ITS is associated with an IRS so ITS nodes are described
as IRS children - use the hierarchy explicitly in the device
tree to define the association.
IWB nodes are described as a separate schema.
An IWB is connected to a single ITS, the connection is made explicit
through the msi-parent property and therefore is not required to be
explicit through a parent-child relationship in the device tree.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-1-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e98 ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
|
|
Document uses only single whitespace after full stop, so fix
inconsistency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Devicetree bindings are supposed to be specific in terms of compatibles
and other properties. Short "specific" has many implications, so extend
the description to cover them:
1. Mention no family names and avoid generic SoC fallbacks in
compatible. The list grew, mixing DO's and DON'T's, so split it into
multiple items.
2. No properties implied by the compatible.
3. Document desired lack of ABI impact and acceptable solution if such
needs arises: clearly marking it in commit msg.
All above follows established Devicetree bindings maintainers review
practice, so no new rules in practice are introduced here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When speaking about compatibles for new devices comparing to "prior
implementations", usually we expect new device to come with more
features, thus logically it is a superset, not subset, of "prior
implementations".
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible string nxp,lpc1850-rtc and fallback to nxp,lpc1788-rtc.
Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: rtc@40046000 (nxp,lpc1850-rtc): compatible: ['nxp,lpc1850-rtc', 'nxp,lpc1788-rtc'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602142842.942700-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
nxp,lpc3220-rtc have clocks property, so move it from trivial-rtc.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250624201733.2515971-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The $id path for the sophgo,cv1800b-rtc binding was missing part of the
path 'soc'. However, the correct place for RTC bindings (even if it's
also a "syscon") is the rtc directory, so move the binding there while
fixing the $id value.
Fixes: 76517429dbfd ("dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250608224252.3902421-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
