| Age | Commit message (Collapse) | Author |
|---|
|
On Apple Silicon machines a clean shutdown or reboot requires
talking to SMC and writing to NVMEM cells. Add a binding for
this MFD sub-device.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-2-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the DT binding for the Apple Mac System Management Controller GPIOs.
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-1-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.17
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
dt-bindings: interconnect: Add EPSS L3 compatible for QCS8300 SoC
dt-bindings: interconnect: qcom: Remove double colon from description
interconnect: qcom: qcs615: Drop IP0 interconnects
interconnect: qcom: sc8180x: specify num_nodes
interconnect: qcom: sc8280xp: specify num_links for qnm_a1noc_cfg
|
|
Allow clocks property to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: i2c@300 (nxp,pnx-i2c): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250624200444.2514331-1-Frank.Li@nxp.com
|
|
Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
The RIIC IP on these parts is similar to that on RZ/V2H(P) but supports
only four interrupts (including a combined error/event), lacks FM+ mode,
and does not require reset. Introduce a new compatible string
`renesas,riic-r9a09g077` for RZ/T2H and use it as a fallback for RZ/N2H.
Unlike earlier SoCs that use eight distinct interrupts, the RZ/T2H uses
only four. Update the binding schema to reflect this interrupt layout
and skip the `resets` property check, as it is not required on these SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
In preparation for adding more validation checks, move the `$ref` for
'i2c-controller.yaml' to the end of the file. Also, relocate the
conditional check for 'resets' into the 'allOf' block.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Misc Devicetrees for v6.17
StarFive:
Sort properties on the MilkV Mars and add the power status LED to all
jh7110 boards.
AMD:
Add 64-bit Microblaze V cpu compatible.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: riscv: cpus: Add AMD MicroBlaze V 64bit compatible
riscv: dts: starfive: jh7110-common: add status power led node
riscv: dts: starfive: jh7110-milkv-mars sort properties
Link: https://lore.kernel.org/r/20250723-postage-skylight-597377b5f8e4@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung SoC drivers for v6.17
1. Google GS101: Minor improvement PMU binding.
2. ExynosAutov920: Add HSI2 system registers binding.
* tag 'samsung-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-sysreg: add hsi2 for ExynosAutov920
dt-bindings: soc: samsung: exynos-pmu: Constrain google,pmu-intr-gen-syscon
Link: https://lore.kernel.org/r/20250723090455.25295-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.17
Sophgo:
For CV18xx serials:
There are three major changes. The first is to add the
RTCSYS MFD node, which provides rich control registers
for soc power management and other rich control functions;
the second is to add the reset controller node and add
related reset properties for other peripherals; the third
is to add ethernet controller related nodes to the soc
and enable ethernet device control for HuashanPi.
For SG2042:
There are three major changes. The first is to add ISA
extensions such as xtheadvector/ziccrse/zfh for cpu cores;
the second is add ethernet controller support; the third
is add two new boards EVB_V1 & EVB_V2 which use SG2042
SoC.
For SG2044:
There are many changes. The first is to add pmu
configuration; the second is to add ISA extensions
ziccrse and add missing riscv,cbop-block-size property
for cpu cores; the third is to add more peripherals
nodes for SoC after clock controller is ready, such as
MSI/PCIe/pwm/SPI-NOR etc. This PR also add HWMON MCU
device for the sophgo-srd3-10 board and reserve uart0
node for sophgo-srd3-10 board because uart0 is already
occupied by the firmware.
This PR also moves sophgo.yaml from the riscv directory
to soc/sophgo for sharing between riscv and arm. CV18xx
SoC contains a RISC-V big core and an ARM64 big core.
Moving sophgo.yaml to a shared location will help us
add support for ARM cores to the CV18xx chip in the future.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux: (32 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Link: https://lore.kernel.org/r/MAUPR01MB1107297124C9DA0CD77DA3DC1FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for chip power supply and chip reset/powerdown.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add support for 4000000 as secondary baudrate for NXP chipsets
supporting max baudrate as 4M, and are close to the host processor on
same PCB. This mainly helps with faster FW download.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Document the bindings for the sound card on Fairphone 4 which uses the
older non-audioreach audio architecture.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-2-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the subnode for Q6USB, used for USB audio offloading.
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250723-fp4-usb-audio-offload-v3-1-6be84ed4fc39@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device-tree bindings for the RT2800 SOC wifi device found in older
Ralink/Mediatek devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250722212856.11343-8-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the compatibles for the rpmpd power domains on glymur
boards
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250716152758.4079467-2-pankaj.patil@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
'minItems' alone does not impose upper bound, unlike 'maxItems' which
implies lower bound. Add missing clock constraint so the list will have
exact number of items (clocks).
Fixes: 2295bbd35edb ("dt-bindings: display: add Unisoc's mipi dsi controller bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250720123003.37662-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
'minItems' alone does not impose upper bound, unlike 'maxItems' which
implies lower bound. Add missing clock constraint so the list will have
exact number of items (clocks).
Fixes: 8cae15c60cf0 ("dt-bindings: display: add Unisoc's dpu bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250720123003.37662-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert fsl,dcu.txt to yaml format.
Additional changes:
- remove label in example.
- change node to display-controller in example.
- use 32bit address in example.
- add interrupts property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/20250616182439.1989840-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Rewrite the textual description for the VIA/WonderMedia timer
as YAML schema.
The IP can generate up to four interrupts from four respective match
registers, so reflect that in the schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250521-vt8500-timer-updates-v5-1-7e4bd11df72e@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert Marvell Armada NETA Ethernet Controller and Buffer Manager
bindings to schema. It is a straight forward conversion.
Link: https://lore.kernel.org/r/20250702222626.2761199-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add DT binding documentation for the Sophgo SG2042_EVB_V1.X/V2.0 board [1].
Link: https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/204c8214aa084d592e8dc45d6c5ca23381937b54.1751700954.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Move sophgo.yaml from riscv into soc/sophgo so that it can be shared for
all SoCs containing ARM cores as well. This already applies to SG2002.
Add SG2000 SoC, Milk-V Duo Module 01 and Milk-V Module 01 EVB.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-2-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt
Apple SoC device tree changes for v6.17
- Added the bindings and nodes for Apple SoC GPU. The driver itself
isn't ready for upstreaming yet due to rust dependencies but we're
confident that the bindings are stable at this point.
- Added a missing node for the touchbar framebuffer to Apple T2 device
trees, which is the BMC for some x86 Macs
- Fixed a W=1 warning by adding bit offsets to NVMEM node names. This
required a change to the generic NVMEM cell binding which will be part
of 6.17 through the NVMEM tree.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Add Apple SoC GPU
dt-bindings: gpu: Add Apple SoC GPU
arm64: dts: apple: t8012-j132: Include touchbar framebuffer node
arm64: dts: apple: Add bit offset to PMIC NVMEM node names
Link: https://lore.kernel.org/r/20250722163258.62424-2-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory
* tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add maskrom button to NanoPi R5S + R5C
arm64: dts: rockchip: Drop regulator-compatible property on rk3399
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2
arm64: dts: rockchip: Move mipi_out node on rk3399 haikou demo dtso
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
arm64: dts: rockchip: Simplify VOP port definition on rk3328
arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards
arm64: dts: rockchip: Move dsi address+size-cells from SoC to px30 boards
arm64: dts: rockchip: Fix UART DMA support for RK3528
arm64: dts: rockchip: Add reset button to NanoPi R5S
arm64: dts: rockchip: Add rtc0 alias for NanoPi R5S + R5C
arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro
arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro
arm64: dts: rockchip: Fix pinctrl node names for RK3528
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar
...
Link: https://lore.kernel.org/r/11552292.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.17
Perform input validation in the MDT loader, as this was not properly
done in the non-remoteproc cases.
Fix endian issues in the QMI encoder/decoder.
Support reading DDR statistic using the Qualcomm stats driver.
Add support for reading TME firmware details to the socinfo driver.
Document the Kryo 470 CPU, and add SM7150 to the DCC to DeviceTree
bindings.
* tag 'qcom-drivers-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: mdt_loader: Fix error return values in mdt_header_valid()
dt-bindings: sram: qcom,imem: Add a number of missing compatibles
dt-bindings: arm: cpus: Add Kryo 470 CPUs
dt-bindings: sram: qcom,imem: Add the SM7150 compatible
dt-bindings: soc: qcom: aoss-qmp: Add the SM7150 compatible
dt-bindings: soc: qcom,dcc: Add the SM7150 compatible
soc: qcom: socinfo: Add support to retrieve TME build details
soc: qcom: fix endianness for QMI header
soc: qcom: QMI encoding/decoding for big endian
dt-bindings: soc: qcom: add qcom,qcs615-imem compatible
soc: qcom: qcom_stats: Add QMP support for syncing ddr stats
soc: qcom: qcom_stats: Add support to read DDR statistic
soc: qcom: mdt_loader: Actually use the e_phoff
soc: qcom: mdt_loader: Rename mdt_phdr_valid()
soc: qcom: mdt_loader: Ensure we don't read past the ELF header
Link: https://lore.kernel.org/r/20250715021454.14516-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.17
1. Several cleanups: Use dev_fwnode() in OMAP GPMX, convert
arm,pl172.txt DT bindings to DT schema, use
syscon_regmap_lookup_by_phandle_args() wrapper, correct kerneldoc.
2. Mediatek MT8186 SMI: Extend hardware bandwidth limits to fix VENC
hardware during stress testing.
3. Broadcom brcmstb_memc: Add additional fallback compatible and
simplify device driver matching. The change comes from Broadcom
SoC maintainer (Florian Fainelli), thus its ABI impact is
acknowledged.
* tag 'memory-controller-drv-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: renesas,rzg3e-xspi: Document RZ/V2H(P) and RZ/V2N support
memory: brcmstb_memc: Simplify compatible matching
dt-bindings: memory-controller: Define fallback compatible
memory: omap-gpmx: Use dev_fwnode()
memory: mtk-smi: Add ostd setting for mt8186
dt-bindings: memory-controllers: convert arm,pl172.txt to yaml format
memory: stm32_omm: Use syscon_regmap_lookup_by_phandle_args
memory: emif: Add missing kerneldoc for lpmode
Link: https://lore.kernel.org/r/20250715095315.59299-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
32bit version has been added by commit 4a6b93f56296 ("dt-bindings: riscv:
cpus: Add AMD MicroBlaze V compatible") but 64bit version also exists and
should be covered by binding too.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
memory: tegra: Updates for v6.17-rc1
Enable support for the memory and external memory controllers found on
Tegra264.
* tag 'tegra-for-6.17-memory' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add Tegra264 MC and EMC support
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Support for the AX3000 SoC, from Harshit Shah <hshah@axiado.com>:
The AX3000 is a multi-core system-on-chip featuring four ARM Cortex-A53
cores, secure vault, hardware firewall, and AI acceleration engines. This
initial support enables basic bring-up of the SoC and evaluation platform
with CPU, timer, UART, and I3C functionality.
The series begins by adding the "axiado" vendor prefix and compatible
strings for the SoC and board. It then introduces the device tree files
and minimal ARCH_AXIADO platform support in arm64.
* newsoc/axiado:
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
|
|
Add binding for AX3000 I3C controller. So far, no changes known,
so it can fallback to default compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add binding for AX3000 UART controller. So far, no changes known,
so it can fallback to default compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add binding for Axiado AX3000 GPIO controller. So far, no changes
are known, so it can fallback to default compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert Cadence family GPIO controller bindings to DT schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree binding schema for Axiado platforms, specifically the
AX3000 SoC and its associated evaluation board. This binding will be
used for the board-level DTS files that support the AX3000 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Link: https://axiado.com
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.17:
- Align wifi node name with bindings
- Add pinctrl nodes for Amlogic S7/S7D/S6 nodes
- Enable the NPU nodes on Alta & VIM3
- New boards:
- Ugoos AM3
* tag 'amlogic-arm64-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: Enable the npu node for Alta and VIM3
dts: arm64: amlogic: add S6 pinctrl node
dts: arm64: amlogic: add S7D pinctrl node
dts: arm64: amlogic: add S7 pinctrl node
arm64: dts: amlogic: Add Ugoos AM3
dt-bindings: arm: amlogic: Add Ugoos AM3
arm64: dts: amlogic: Align wifi node name with bindings
Link: https://lore.kernel.org/r/3d93b621-9544-4a68-85db-6f87a9e8fa5c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.17
79b896e7da7e arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
6516961352a1 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
The DB410c D3 camera mezzanine is converted to an overlay.
On MSM8976 SDC2 pinctrl definitions are introduced and BLSP DMA
controller is marked to be managed by another entity.
Add camera subsystem on the QCM2290 platform.
Add and enable remoteproc and related devices on QCS615.
Add and enable Video encoder/decoder on QCS8300 and SA8775P.
Also on SA8775P add CPU OPP tables for scaling DDR/L3 bandwidth based on
CPU frequency, add L3 interconnect definitions, DSI and video
encoder/decoder support.
Enable the SLPI remoteproc on SDM850-based Lenovo Yoga C630.
On SM6350, add the video clock controller, APR and some audio related
services.
Describe the camera subsystem on SM8550 and add Iris video
encoder/decoder node for SM8650.
On SM8750 introduce UFS and Soundwire support, enable these and describe
the sound hardware on MTP and QRD.
Add camera clock controller on SC8180X.
On X Elite, for the Dell XPS13, add WiFi and Bluetooth pwrseq and enable
the fingerprint sensor. For HP Omnibook X14 USB1 SS1 SBU mux and do
some misc cleanup.
Replace the thermal zones inherited from X Elite with X Plus-specific
ones.
Add missing interrupts and clean up unrelated clocks for PCIe
controllers across a variety of platforms.
* tag 'qcom-arm64-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
arm64: dts: qcom: sm8150: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: sc8180x: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: x1-asus-zenbook: support sound
arm64: dts: qcom: x1-asus-zenbook: fixup GPU nodes
arm64: dts: qcom: sm6115: add debug UART pins
arm64: dts: qcom: sm8650: add iris DT node
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
arm64: dts: qcom: msm8976: Add sdc2 GPIOs
dt-bindings: arm: qcom: Add MSM8976 BQ Aquaris X5 Plus
arm64: dts: qcom: msm8976: Make blsp_dma controlled-remotely
arm64: dts: qcom: sa8775p: Correct the interrupt for remoteproc
arm64: dts: qcom: sm8550: Add support for camss
arm64: dts: qcom: qcs615: disable the CTI device of the camera block
arm64: dts: qcom: qcs615-ride: enable remoteprocs
arm64: dts: qcom: qcs615: add ADSP and CDSP nodes
arm64: dts: qcom: qcs615: Add IMEM and PIL info region
arm64: dts: qcom: qcs615: Add mproc node for SEMP2P
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
arm64: dts: qcom: sc7180: Expand IMEM region
arm64: dts: qcom: sdm845: Expand IMEM region
...
Link: https://lore.kernel.org/r/20250716031059.76348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.17
Generic fixes and cleanups:
* Enable overlays for all DTB files
* Enable Schmitt Trigger by default in K3 pinctrl
SoC specific changes:
AM62D
* Add new SoC support and pinctrl entries
AM62
* Remove eMMC High Speed DDR support
* Move eMMC pinmux to top level board file
J784S4/J742S2
* Add Power on BIST (PBSIT) nodes
* Add ACSPCIE1 node
J721S2
* Add McASP support
J722S
* Add alernate audio-refclk0 node
Board changes:
Multiple boards
* Bootphase tags for Ethernet boot support
AM62D2-EVM
* Add new board support
AM62A7-SK
* Fix pinmux for main_uart1
* Add SPI NAND support
AM62P
* Fix PWM_3_DSI GPIO direction, SD pull up, I2C ups on AM62P-Verdin
* Add bootph-all property for Ethernet boot
AM62-Verdin
* Enable pull-ups on I2C buses
AM654-base-board
* Add boot phase tags for various bootmodes
AM64
* Add boot phase tag PCIe EP boot
* Fix PRU-ICSSG Ethernet ports on AM642-PhyBoard-Electra
AM69-SK
* Add idle-states for remaining SERDES instances
J722S-EVM
* Fix USB gpio-hog level for Type-C
* tag 'ti-k3-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (33 commits)
arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances
arm64: dts: ti: k3-am62a7-sk: add boot phase tags
arm64: dts: ti: k3-am654-base-board: add boot phase tags
arm64: dts: ti: k3-am65: add boot phase tags
arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: Add support for AM62D2-EVM
arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs
dt-bindings: arm: ti: Add AM62D2 SoC and Boards
arm64: dts: ti: Add bootph property to nodes at source for am62a
arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points
arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert
arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node
dt-bindings: soc: ti: bist: Add BIST for K3 devices
arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support
arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1
arm64: dts: ti: Enable overlays for all DTB files
...
Link: https://lore.kernel.org/r/a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.17
Add aliases for MMC controllers on MSM8974, enable USB charging on the
Sony Xperia Rhine platform and add new DeviceTree for the Sony Xperia Z
Ultra device.
Tidy up interrupts specifiers on MSM8960, by using macro constants.
* tag 'qcom-arm32-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-sony-xperia-rhine: Add alias for mmc0 & mmc1
ARM: dts: qcom: msm8974-hammerhead: Add alias for mmc0
ARM: dts: qcom: msm8974-oneplus-bacon: Add alias for mmc0
ARM: dts: qcom: Add initial support for Sony Xperia Z Ultra (togari)
dt-bindings: arm: qcom: Add Sony Xperia Z Ultra (togari)
ARM: dts: qcom: msm8974-sony-xperia-rhine: Move camera buttons to amami & honami
ARM: dts: qcom: msm8974-sony-xperia-rhine: Enable USB charging
ARM: dts: qcom: msm8960: use macros for interrupts
ARM: dts: qcom: Align wifi node name with bindings
Link: https://lore.kernel.org/r/20250715021838.14751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.17
- Add DMA translation buses
- Add PWM support
- Add Reset support
- Add eMMC node
* tag 'spacemit-dt-for-6.17-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: Move eMMC under storage-bus for K1
riscv: dts: spacemit: Move UARTs under dma-bus for K1
riscv: dts: spacemit: Add DMA translation buses for K1
riscv: dts: spacemit: add pwm14_1 pinctrl setting
riscv: dts: spacemit: add PWM support for K1 SoC
riscv: dts: spacemit: add reset support for the K1 SoC
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
riscv: dts: spacemit: enable eMMC for K1 SoC
Link: https://lore.kernel.org/r/20250715014214-GYA540030@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.17:
- New board compatibles for i.MX28 Amarula, Engicam MicroGEA, GOcontroll
and phyCORE-i.MX 95 Plus FPSC SoM
- A couple of i.MX AIPSTZ bridge related bindings updates from
Laurentiu Mihalcea
* tag 'imx-bindings-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: add imx95-libra-rdk-fpsc
dt-bindings: arm: fsl: support Engicam MicroGEA GTW board
dt-bindings: arm: fsl: support Engicam MicroGEA RMM board
dt-bindings: arm: fsl: support Engicam MicroGEA BMM board
dt-bindings: dsp: fsl,dsp: document 'access-controllers' property
dt-bindings: bus: document the IMX AIPSTZ bridge
dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
dt-bindings: arm: fsl: Add GOcontroll Moduline Display
Link: https://lore.kernel.org/r/20250713055441.221235-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Updates for v6.17-rc1
Add Tegra264 compatible strings for some core components and extend
bindings where necessary to accomodate the new hardware generation. Also
document some new platforms, for both old and new chips.
* tag 'tegra-for-6.17-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add Asus Portable AiO P1801-T
dt-bindings: arm: tegra: Add Asus VivoTab RT TF600T
dt-bindings: Add Tegra264 clock and reset definitions
dt-bindings: tegra: Document P3971-0089+P3834-0008 Platform
dt-bindings: rtc: tegra: Document Tegra264 RTC
dt-bindings: dma: Add Tegra264 compatible string
dt-bindings: misc: Document Tegra264 APBMISC compatible
dt-bindings: firmware: Document Tegra264 BPMP
dt-bindings: mailbox: tegra-hsp: Properly sort compatible string list
dt-bindings: mailbox: tegra-hsp: Bump number of shared interrupts
dt-bindings: tegra: pmc: Add Tegra264 compatible
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
SA8255p platform abstracts resources such as clocks, interconnect
configuration in Firmware.
Add DT bindings for the QUP Wrapper on sa8255p platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Praveen Talari <quic_ptalari@quicinc.com>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-3-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SA8255p platform abstracts resources such as clocks, interconnect and
GPIO pins configuration in Firmware. SCMI power and perf protocols are
used to send request for resource configurations.
Add DT bindings for the QUP GENI UART controller on sa8255p platform.
The wakeup interrupt (IRQ) is treated as optional, as not all UART
instances have a wakeup-capable interrupt routed via the PDC.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Praveen Talari <quic_ptalari@quicinc.com>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250721174532.14022-2-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
|
|
Add documentation and driver for the interconnect on the Milos SoC.
* icc-milos
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
interconnect: qcom: Add Milos interconnect provider driver
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-0-c446203c3b3a@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
==================
ath.git patches for v6.17
Highlights for some specific drivers include:
ath9k:
Add AHB "of" support
ath11k:
Support device-specific firmware override
Fix potentially reordered access to device memory
ath12k:
Add more Wi-Fi 7 functionality
Add more statistics to DebugFS
Support different memory profiles
Support 802.11 encap/decap offload to firmware
Fix potentially reordered access to device memory
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the compatible string for Tegra210B01 SOC_THERM
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250720-t210b01-v2-5-9cb209f1edfc@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
and MT8516
The ‘mediatek,mt7981-thermal’ and ‘mediatek,mt8516-thermal’ strings
aren't definied in the driver. Both should have fallback compatible
strings. This commit fixes this issue.
Fixes: 788494ba0999 ("dt-bindings: thermal: convert Mediatek Thermal to the json-schema")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20250712195904.6988-2-olek2@wp.pl
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
