Age | Commit message (Collapse) | Author |
|
Document the binding for TI K3 BIST (Built-In Self Test) block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250605063506.2005637-2-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e98 ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document uses only single whitespace after full stop, so fix
inconsistency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Devicetree bindings are supposed to be specific in terms of compatibles
and other properties. Short "specific" has many implications, so extend
the description to cover them:
1. Mention no family names and avoid generic SoC fallbacks in
compatible. The list grew, mixing DO's and DON'T's, so split it into
multiple items.
2. No properties implied by the compatible.
3. Document desired lack of ABI impact and acceptable solution if such
needs arises: clearly marking it in commit msg.
All above follows established Devicetree bindings maintainers review
practice, so no new rules in practice are introduced here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When speaking about compatibles for new devices comparing to "prior
implementations", usually we expect new device to come with more
features, thus logically it is a superset, not subset, of "prior
implementations".
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
Add the compatible strings for the NXP s32g2 and s32g3. These chips
are mostly compatible. The one difference is that the s32g2-usbmisc
device has an errata ERR050474 which requires a special flag to be set
for handling packages that aren't 4 byte aligned.
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/596d188a-9a2d-41e5-af70-c99bc2b7ca7a@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TCA6418E is a 18-channel I2C I/O expander with integrated ESD
protection.
Signed-off-by: Maria Garcia <mariagarcia7293@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250703205740.45385-2-mariagarcia7293@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add compatible for Mediatek MT7988 SoC with mediatek,mt8183-cci fallback
which is taken by driver.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20250706132213.20412-8-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add an entry for the MT8186 based Squirtle Chromebooks, also known as the
Acer Chromebook Spin 311 (R724T). The device is a 2-in-1 convertible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate compatible strings and device trees.
Drop the SKU-specific compatible strings and just keep the generic
"google,voltorb" one.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into gpio/for-next
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
Convert pc32xx-pwm.txt to yaml format.
Additional changes:
- add ref to pwm.yaml
- add clocks
- restrict #pwm-cells to 3
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250625161909.2541315-1-Frank.Li@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Document trivial PWM on Argon40 Fan HAT, which is a RaspberryPi
blower fan hat which can be controlled over I2C.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250629220757.936212-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Argon 40 Technologies Limited is a SBC expansion board vendor.
Document the prefix. For details see https://argon40.com .
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250629220757.936212-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add compatible strings for the MediaTek Dimensity 9400 MT6991 and
for the MT8196 Chromebook SoC, having the same PWM IP v3.0.2.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250623120118.109170-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Convert lpc1850-sct-pwm.txt to yaml format.
Additional changes:
- add ref pwm.yaml.
- add resets property to match existed dts.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250616190435.1998078-1-Frank.Li@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Change the documentation link to point to the location with the most
up-to-date information.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250529-pwm-axi-pwmgen-add-external-clock-v3-1-5d8809a7da91@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add compatible string for PWM controller on SG2044.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://lore.kernel.org/r/20250528101139.28702-2-looong.bin@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The SpacemiT K1 SoC reuses the Marvell PXA910-compatible PWM controller
with one notable difference: the addition of a resets property. To make
the device tree pass schema validation (make dtbs_check W=3), this patch
updates the binding to accept spacemit,k1-pwm as a compatible string, when
used in conjunction with the fallback marvell,pxa910-pwm.
Support for the optional resets property is also added, as it is required
by the K1 integration but was not present in the original Marvell bindings.
Since the PWM reset line may be deasserted during the early bootloader
stage, making the resets property optional avoids potential
double-deassertion, which could otherwise cause flickering on displays
that use PWM for backlight control.
Additionally, this patch adjusts the required value of the #pwm-cells
property for the new compatible string:
- For "spacemit,k1-pwm", #pwm-cells must be set to 3.
- For existing Marvell compatibles, #pwm-cells remains 1.
Background of #pwm-cells change is by an ongoing community discussion
about increasing the #pwm-cells value from 1 to 3 for all Marvell PXA PWM
devices. These devices are currently the only ones whose bindings do not
pass the line index as the first argument. See [1] for further details.
[1] https://lore.kernel.org/all/cover.1738842938.git.u.kleine-koenig@baylibre.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> # v2
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-2-guodong@riscstar.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.
Add its compatible name to the list of valid ones.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250628161608.3072968-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Allow clocks property to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: adc@40048000 (nxp,lpc3220-adc): 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250624201302.2515391-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree support for spi 3-wire configuration.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250626104024.8645-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: initialise msg_write_idx during transfer
- microchip: check return value from core xfer call
- realtek: add 'reg' property constraint to the device tree
* tag 'i2c-for-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint
i2c: microchip-core: re-fix fake detections w/ i2cdetect
i2c/designware: Fix an initialization issue
|
|
We need the USB fixes in here as well to build on top of for other
changes that depend on them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC.
https://ugoos.com/ugoos-am3-16g
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-1-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
iio: 1st set of fixes for the 6.16 cycle
The usual mixed back of the recent and ancient issues that have surfaced
so far this cycle.
iio-core
- Fix a possible out of bounds write on writing string terminator.
iio-backend:
- Fix a possible out of bounds write on writing string terminator.
adi,ad3530r
- Fix wrong masking for channels 4-7 in powerdown mode as they are in a
second register and mask assumed all in one larger register.
adi,ad7380
- Fix parsing of adi,gain-milli property by reading it as u16 as specified
in the binding.
adi,ad7606
- Tweak dt-binding to allow both interrupts and backend to be wired up
resolving some dt_schema warnings.
- Mask value before returning it in register read as for parallel busses
both the value and (unwanted) address are read back.
adi,ad7949
- Use spi_is_bpw_supported() to correctly handle bits_per_word_mask == 0
which means default value of 8.
invensense,mpu3050
- Fix wrong number of interrupts in the binding as minItems should have
been maxItems.
maxim,max1363
- Two related fixes for a long running mismatch between array indexes
that now results in warnings after the core gained a sanity check.
Resulted in unnecessary channels being sampled.
nxp,fxls8962
- Fix a use after free in fxls8962af_fifo_flush() if it races with buffer
mode tear down.
st,sensors
- Stop using indio_dev->dev before it was initialized as the parent device
should be used anyway for error messages and similar.
st,stm32-adc
- Fix a race when installing chained IRQ handler.
x-powers,axp20x_adc
- Add missing sentinel in ADC channel map (avoid out of bounds read).
* tag 'iio-fixes-for-6.16a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown mode
iio: adc: ad7380: fix adi,gain-milli property parsing
iio: adc: ad7949: use spi_is_bpw_supported()
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel maps
dt-bindings: iio: gyro: invensense,mpu3050: change irq maxItems
iio: common: st_sensors: Fix use of uninitialize device structs
iio: adc: adi-axi-adc: fix ad7606_bus_reg_read()
dt-bindings: iio: adc: adi,ad7606: fix dt_schema validation warning
iio: adc: max1363: Reorder mode_list[] entries
iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]
iio: adc: stm32-adc: Fix race in installing chained IRQ handler
iio: fix potential out-of-bound write
iio: backend: fix out-of-bound write
|
|
Add the "st,stm32mp157f-dk2" compatible string to the STM32 SoC
bindings. The MP157F is functionally similar to the MP157C.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-6-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Document the new compatibles used on Facebook Santabarbara.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20250625073847.4054971-2-fredchen.openbmc@gmail.com
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - new code bugs:
- eth:
- txgbe: fix the issue of TX failure
- ngbe: specify IRQ vector when the number of VFs is 7
Previous releases - regressions:
- sched: always pass notifications when child class becomes empty
- ipv4: fix stat increase when udp early demux drops the packet
- bluetooth: prevent unintended pause by checking if advertising is active
- virtio: fix error reporting in virtqueue_resize
- eth:
- virtio-net:
- ensure the received length does not exceed allocated size
- fix the xsk frame's length check
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- bluetooth: mesh: check instances prior disabling advertising
- eth:
- idpf: convert control queue mutex to a spinlock
- dpaa2: fix xdp_rxq_info leak
- amd-xgbe: align CL37 AN sequence as per databook"
* tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
vsock/vmci: Clear the vmci transport packet properly when initializing it
dt-bindings: net: sophgo,sg2044-dwmac: Drop status from the example
net: ngbe: specify IRQ vector when the number of VFs is 7
net: wangxun: revert the adjustment of the IRQ vector sequence
net: txgbe: request MISC IRQ in ndo_open
virtio_net: Enforce minimum TX ring size for reliability
virtio_net: Cleanup '2+MAX_SKB_FRAGS'
virtio_ring: Fix error reporting in virtqueue_resize
virtio-net: xsk: rx: fix the frame's length check
virtio-net: use the check_mergeable_len helper
virtio-net: remove redundant truesize check with PAGE_SIZE
virtio-net: ensure the received length does not exceed allocated size
net: ipv4: fix stat increase when udp early demux drops the packet
net: libwx: fix the incorrect display of the queue number
amd-xgbe: do not double read link status
net/sched: Always pass notifications when child class becomes empty
nui: Fix dma_mapping_error() check
rose: fix dangling neighbour pointers in rose_rt_device_down()
enic: fix incorrect MTU comparison in enic_change_mtu()
amd-xgbe: align CL37 AN sequence as per databook
...
|
|
Add compatible string fsl,ls1046a-wdt for ls1046a SoC. fsl,ls1046a-wdt
allows big-endian property.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250608030616.3874517-2-Meng.Li@windriver.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.
Fix the name in the driver, header and device-tree.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus updates the 64-bit BCMBCA SoCs Device Tree with the common
peripherals that exit as well as correct IRQ assignments
- Andrea adds support for the RP1 companion chip on the Raspberry Pi 5
systems with clocks, gpios, pinctrl, all of that using an overlay to
describe those peripherals
- Rob drops the interrupt-parent property from the GICv2M node on
Northstar2 SoCs
* tag 'arm-soc/for-6.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: northstar2: Drop GIC V2M "interrupt-parent"
arm64: dts: broadcom: Add overlay for RP1 device
arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
arm64: dts: rp1: Add support for RaspberryPi's RP1 device
dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
ARM64: dts: bcm63158: Add BCMBCA peripherals
ARM64: dts: bcm6858: Add BCMBCA peripherals
ARM64: dts: bcm6856: Add BCMBCA peripherals
ARM64: dts: bcm4908: Add BCMBCA peripherals
Link: https://lore.kernel.org/r/20250630190216.1518354-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus makes a number of updates to the BCMBCA SoCs Device Tree files
to correct UART interrupt numbers, add interrupts to the RNG block,
and leverage the fact that all SoCs have the same peripherals at the
same aperture
- Uwe corrects the Merakia MX6X DTS file to have #pwm-cells = 3 as per
the binding
* tag 'arm-soc/for-6.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm958625-meraki-mx6x: Use #pwm-cells = <3>
ARM: dts: bcm63178: Add BCMBCA peripherals
ARM: dts: bcm63148: Add BCMBCA peripherals
ARM: dts: bcm63138: Add BCMBCA peripherals
ARM: dts: bcm6878: Add BCMBCA peripherals
ARM: dts: bcm6855: Add BCMBCA peripherals
ARM: dts: bcm6846: Add interrupt to RNG
dt-bindings: rng: r200: Add interrupt property
ARM: dts: bcm6878: Correct UART0 IRQ number
Link: https://lore.kernel.org/r/20250630190216.1518354-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.17
- Document more board part numbers.
* tag 'renesas-dt-bindings-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document RZ/T2H Evaluation Board part number
dt-bindings: soc: renesas: Document RZ/V2H EVK board part number
Link: https://lore.kernel.org/r/cover.1751026663.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are additional SpacemiT syscon CCUs whose registers control both
clocks and resets: RCPU, RCPU2, and APBC2. Unlike those defined
previously, these will (initially) support only resets. They do not
incorporate power domain functionality.
Previously the clock properties were required for all compatible nodes.
Make that requirement only apply to the three existing CCUs (APBC, APMU,
and MPMU), so that the new reset-only CCUs can go without specifying them.
Define the index values for resets associated with all SpacemiT K1
syscon nodes, including those with clocks already defined, as well as
the new ones (without clocks).
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-2-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Document the sdhci compatible for Qualcomm qcs8300
to support function for emmc on the Soc.
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250702085927.10370-2-quic_sayalil@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert the Marvell Orion SPI binding to schema.
Update compatible strings to what is in use. Generally,
"marvell,orion-spi" is a fallback compatible, but newer variants only
use "marvell,armada-380-spi".
Mark cell-index as deprecated and not required as some instances don't
use it already.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250702222643.2761617-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the devicetree compatible for Loongson-2K2000 EMMC/SD/SDIO controller.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/2274fcccd27d7c03bc026fd2a43727bdf5af1ef5.1750765495.git.zhoubinbin@loongson.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the Loongson-2K SoC's SD/SDIO/eMMC controller binding with DT schema
format using json-schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/949c55be120a806ea3d74b47fa2cc96ced2905fc.1750765495.git.zhoubinbin@loongson.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add SDHI bindings for the Renesas RZ/T2H (a.k.a R9A09G077) and RZ/N2H
(a.k.a R9A09G087) SoCs. Use `renesas,sdhi-r9a09g057` as a fallback since
the SD/MMC block on these SoCs is identical to the one on RZ/V2H(P),
allowing reuse of the existing driver without modifications.
Update the binding schema to reflect differences: unlike RZ/V2H(P),
RZ/T2H and RZ/N2H do not require the `resets` property and use only a
two clocks instead of four.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250617164914.158091-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Examples should be complete and should not have a 'status' property,
especially a disabled one because this disables the dt_binding_check of
the example against the schema. Dropping 'status' property shows
missing other properties - phy-mode and phy-handle.
Fixes: 114508a89ddc ("dt-bindings: net: Add support for Sophgo SG2044 dwmac")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250701063621.23808-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the Synopsys Designware Reset Controller binding to schema. It
is a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250702222609.2760718-1-robh@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
|
|
Document the compatible values for the Renesas R-Car V4M-7
(R8A779H2) SoC, as used on the Renesas Gray Hawk Single board.
R-Car V4M-7 is an updated version of R-Car V4M (R8A779H0).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/b4283a68aa01c82d4435ee8334093dcbdf5bd4d2.1750931027.git.geert+renesas@glider.be
|
|
Lists should have fixed amount if items, so add missing constraint to
the 'reg' property (only one address space entry).
Fixes: c5eda0333076 ("dt-bindings: i2c: Add Realtek RTL I2C Controller")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250702061530.6940-2-krzysztof.kozlowski@linaro.org
|
|
Add bindings for QCS8275 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Link: https://patch.msgid.link/20250701102915.4016108-2-quic_pkumpatl@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add devicetree bindings for Engicam MicroGEA GTW board based on the
Engicam MicroGEA SoM (System-on-Module).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add devicetree bindings for Engicam MicroGEA RMM board based on the
Engicam MicroGEA SoM (System-on-Module).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|