summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2025-07-01dt-bindings: net: convert nxp,lpc1850-dwmac.txt to yaml formatFrank Li
Convert nxp,lpc1850-dwmac.txt to yaml format. Additional changes: - compatible string add fallback as "nxp,lpc1850-dwmac", "snps,dwmac-3.611" "snps,dwmac". - add common interrupts, interrupt-names, clocks, clock-names, resets and reset-names properties. - add ref snps,dwmac.yaml. - add phy-mode in example to avoid dt_binding_check warning. - update examples to align lpc18xx.dtsi. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250630161613.2838039-1-Frank.Li@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02iio: adc: ad7173: add SPI offload supportMark Brown
Merge series from David Lechner <dlechner@baylibre.com>: Also there is a new dt-binding and driver for a special SPI offload trigger FPGA IP core that is used in this particular setup.
2025-07-01dt-bindings: trigger-source: add ADI Util Sigma-Delta SPIDavid Lechner
Add new binding for the ADI Util Sigma-Delta SPI FPGA IP Core. This is used to trigger a SPI offload based on a RDY signal from the ADC while masking out other signals on the same line. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250627-iio-adc-ad7173-add-spi-offload-support-v2-8-f49c55599113@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-01dt-bindings: mfd: adp5585: document reset gpioNuno Sá
Add a reset gpio property. Note that for the adp5585-01 models, the reset pin is used as the additional ROW5 which means there's no reset. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-19-b1fcfe9e9826@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-01dt-bindings: mfd: adp5585: add properties for input eventsNuno Sá
Add properties related to input events. These devices can act as keyboards and can support events either via a keymap Matrix or through GPIs. Note that the device needs to be an interrupt controller for GPIs based events. We specifically need a property specifying the pins used by the keymap matrix since these devices have no requirement for rows and columns to be contiguous without holes which is enforced by the standard input properties. Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-11-b1fcfe9e9826@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-01dt-bindings: mfd: adp5585: document adp5589 I/O expanderNuno Sá
The ADP5589 is a 19 I/O port expander with built-in keypad matrix decoder, programmable logic, reset generator, and PWM generator. We can't really have adp5589 devices fallback to adp5585 (which have less pins) because there are some significant differences in the register map. Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-5-b1fcfe9e9826@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-01dt-bindings: mfd: adp5585: ease on the required propertiesNuno Sá
It is not mandatory to use all the capabilities of the device. One can very well only use it as a gpio controller without the PWM support. This will be even more evident when support for the matrix keymap is added. Hence drop the requirements for PWM and GPIO. Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-1-b1fcfe9e9826@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-01dt-bindings: dsp: fsl,dsp: document 'access-controllers' propertyLaurentiu Mihalcea
Some DSP instances may have their access to certain peripherals conditioned by a bus access controller such as the one from the AIPSTZ bridge. Add the optional 'access-controllers' property, which may be used in such cases. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-07-01dt-bindings: bus: document the IMX AIPSTZ bridgeLaurentiu Mihalcea
Add documentation for IMX AIPSTZ bridge. Co-developed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-07-01dt-bindings: arm: fsl: add i.MX28 Amarula rmm boardDario Binacchi
The board includes the following resources: - 256 Mbytes NAND Flash - 128 Mbytes DRAM DDR2 - CAN - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-07-01dt-bindings: serial: mediatek,uart: add MT6572Max Shevchenko
Add a compatible string for serial on the MT6572 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Max Shevchenko <wctrl@proton.me> Link: https://lore.kernel.org/r/20250701-mt6572-v3-1-8937cfa33f95@proton.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-30dt-bindings: interrupt-controller: Convert fsl,mpic-msi to YAMLJ. Neuschäfer
As part of a larger effort to bring various PowerPC-related bindings into the YAML world, this patch converts msi-pic.txt to YAML and moves it into the bindings/interrupt-controller/ directory. The conversion may necessarily be a bit hard to read because the binding is quite verbose. Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Link: https://lore.kernel.org/r/20250611-msipic-yaml-v2-1-f2e174c48802@posteo.net Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-30dt-bindings: omap: Add Seeed BeagleBone Green EcoKory Maincent
Document the seeed,am335x-bone-green-eco compatible string in the appropriate place within the omap family binding file. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20250620-bbg-v5-2-84f9b9a2e3a8@bootlin.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-06-30dt-bindings: display: panel: Make reset-gpio as optional for Raydium RM67200Andy Yan
Although the datasheet of the panel module describes that it has a reset pin, in the actual hardware design, we often use an RC circuit to control the reset, and rarely use GPIO to control the reset. This is the way it is done on our numerous development boards (such as RK3568, RK3576 EVB). So make the reset-gpio optional. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250616070536.670519-1-andyshrk@163.com
2025-06-30dt-bindings: display: panel: Add Himax HX83112BLuca Weiss
Himax HX83112B is a display driver IC used to drive LCD DSI panels. Describe it and the Fairphone 3 panel (98-03057-6598B-I) from DJN using it. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250611-fp3-display-v4-2-ef67701e7687@lucaweiss.eu
2025-06-30dt-bindings: vendor-prefixes: document Shenzhen DJN Optronics TechnologyLuca Weiss
Add the vendor prefix for DJN (http://en.djnlcd.com/). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250611-fp3-display-v4-1-ef67701e7687@lucaweiss.eu
2025-06-30dt-bindings: display: vop2: Add optional PLL clock property for rk3576Cristian Ciocaltea
As with the RK3588 SoC, RK3576 also allows the use of HDMI PHY PLL as an alternative and more accurate pixel clock source for VOP2. Document the optional PLL clock property. Moreover, given that this is part of a series intended to address some recent display problems, provide the appropriate tags to facilitate backporting. Fixes: c3b7c5a4d7c1 ("dt-bindings: display: vop2: Add rk3576 support") Cc: stable@vger.kernel.org Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-1-4b11007d8675@collabora.com
2025-06-30Merge 6.16-rc4 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-29Merge tag 'tty-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are five small serial and tty and vt fixes for 6.16-rc4. Included in here are: - kerneldoc fixes for recent vt changes - imx serial driver fix - of_node sysfs fix for a regression - vt missing notification fix - 8250 dt bindings fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive serial: imx: Restore original RXTL for console to fix data loss serial: core: restore of_node information in sysfs vt: fix kernel-doc warnings in ucs_get_fallback() vt: add missing notification when switching back to text mode
2025-06-29dt-bindings: iio: gyro: invensense,mpu3050: change irq maxItemsRodrigo Gobbi
The mpu3050 datasheet describes that this IC only supports one INT pin, which means one item with two cells inside binding. Change max to match this description. Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com> Fixes: 749787477ae4 ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250527215818.13000-1-rodrigo.gobbi.7@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29dt-bindings: iio: adc: adi,ad7606: fix dt_schema validation warningAngelo Dureghello
Fix following dt_schema warning when offload is used: DTC [C] arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb /home/angelo/dev-baylibre/linux-iio/arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb: adc@0: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'io-backends' is a required property from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# There isn't any reason that we couldn't have interrupts wired up at the same time we are using io-backends or SPI offload, so dropping off the related "oneOf" block entirely. Fixes: 81fe5529e812 ("dt-bindings: iio: adc: adi,ad7606: add SPI offload properties") Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250526-wip-bl-ad7606-dtschema-fixes-v2-1-9bd56d039489@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-29dt-bindings: serial: 8250: allow clock 'uartclk' and 'reg' for nxp,lpc1850-uartFrank Li
Allow clock 'uartclk' and 'reg' for nxp,lpc1850-uart to align existed driver and dts. It is really old platform. Keep the same restriction for others. Allow dmas and dma-names property, which allow maxItems 4 because very old platform (arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi) use duplicate "tx", "rx", "tx", "rx" as dma-names. Fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: serial@40081000 (nxp,lpc1850-uart): clock-names: ['uartclk', 'reg'] is too long Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250602142745.942568-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: add downstream facing portsDmitry Baryshkov
In order to describe connections between Genesys GL850G hub and corresponding Type-C connectors, follow example of RTS5411 and describe downstream facing ports. Unline normal case of ports being connected to a USB device, hotplug ports use OF graph representation. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-2-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: use usb-hub.yamlDmitry Baryshkov
In order to reduce duplication, switch GL850G to use USB hub bindings instead of using simple usb-device.yaml Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-1-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27dt-bindings: dsa: Rewrite Micrel KS8995 in schemaLinus Walleij
After studying the datasheets for some of the KS8995 variants it becomes pretty obvious that this is a straight-forward and simple MII DSA switch with one port in (CPU) and four outgoing ports, and it even supports custom tags by setting a bit in a special register, and elaborate VLAN handling as all DSA switches do. What is a bit odd with KS8995 is that it uses an extra MII-P5 port to access one of the PHYs separately, on the side of the switch fabric, such as when using a WAN port separately from a LAN switch in a home router. Rewrite the terse bindings to YAML, and move to the proper subdirectory. Include a verbose example to make things clear. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250625-ks8995-dsa-bindings-v2-1-ce71dce9be0b@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net: sun8i-emac: Add A100 EMAC compatiblePaul Kocialkowski
The Allwinner A100/A133 has an Ethernet MAC (EMAC) controller that is compatible with the A64 one. It features the same syscon registers for control of the top-level integration of the unit. Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250626080923.632789-4-paulk@sys-base.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net/nfc: ti,trf7970a: Add ti,rx-gain-reduction-db optionPaul Geurts
Add option to reduce the RX antenna gain to be able to reduce the sensitivity. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250626141242.3749958-2-paul.geurts@prodrive-technologies.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: net: convert lpc-eth.txt yaml formatFrank Li
Convert lpc-eth.txt yaml format. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250624202028.2516257-1-Frank.Li@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27dt-bindings: reset: sophgo: Add CV1800B supportInochi Amaoto
Add bindings for the reset generator on the SOPHGO CV1800B RISC-V SoC. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250617070144.1149926-2-inochiama@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC supportLad Prabhakar
Document support for the USB2PHY reset controller found on the Renesas RZ/V2N (R9A09G056) SoC. The reset controller IP is functionally identical to that on the RZ/V2H(P) SoC, so no driver changes are needed. The existing `renesas,r9a09g057-usb2phy-reset` compatible will be used as a fallback for the RZ/V2N SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250528133031.167647-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml formatFrank Li
Convert nxp,lpc1850-rgu.txt to yaml format. Additional changes: - remove label in example. - remove reset consumer in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250602144046.943982-1-Frank.Li@nxp.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: reset: add support for canaan,k230-rstJunhui Liu
Introduces a reset controller driver for the Kendryte K230 SoC, resposible for managing the reset functionality of the CPUs and various sub-modules. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech> Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-06-27dt-bindings: net: Document support for Airoha AN7583 MDIO ControllerChristian Marangi
Airoha AN7583 SoC have 3 different MDIO Controller. One comes from the intergated Switch based on MT7530. The other 2 live under the SCU register and expose 2 dedicated MDIO controller. Document the schema for the 2 dedicated MDIO controller. Each MDIO controller can be independently reset with the SoC reset line. Each MDIO controller have a dedicated clock configured to 2.5MHz by default to follow MDIO bus IEEE 802.3 standard. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-27dt-bindings: memory-controller: Define fallback compatibleFlorian Fainelli
All of the DDR controllers beyond revision b.2.1 have had a consistent layout, therefore define a "brcm,brcmstb-memc-ddr-rev-b.2.1" fallback compatible string to match them all rather than having to continuously add to the list. Link: https://lore.kernel.org/all/20241217194439.929040-2-florian.fainelli@broadcom.com/ Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250609212356.2264244-2-florian.fainelli@broadcom.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-06-26dt-bindings: interrupt-controller: Add arm,armv7m-nvic and fix #interrupt-cellsFrank Li
According to existed dts arch/arm/boot/dts/armv7-m.dtsi and driver drivers/irqchip/irq-nvic.c, compatible string should be arm,armv7m-nvic, Fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dtb: /interrupt-controller@e000e100: failed to match any schema with compatible: ['arm,armv7m-nvic'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250624224630.2518776-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-26dt-bindings: trivial-devices: add compatible string nxp,isp1301 from isp1301.txtFrank Li
Delete isp1301.txt and add compatible string nxp,isp1301 to trivial-devices because this i2c device have only reg propepty. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250623204048.2493819-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-26dt-bindings: net: Rename renesas,r9a09g057-gbeth.yamlGeert Uytterhoeven
The DT bindings file "renesas,r9a09g057-gbeth.yaml" applies to a whole family of SoCs, and uses "renesas,rzv2h-gbeth" as a fallback compatible value. Hence rename it to the more generic "renesas,rzv2h-gbeth.yaml". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/721f6e0e09777e0842ecaca4578bc50c953d2428.1750838954.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27Merge tag 'drm-misc-next-2025-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.17: UAPI Changes: Cross-subsystem Changes: Core Changes: - ci: Add Device tree validation and kunit - connector: Move HDR sink metadat to drm_display_info Driver Changes: - bochs: drm_panic Support - panfrost: MT8370 Support - bridge: - tc358767: Convert to devm_drm_bridge_alloc() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250626-sincere-loon-of-effort-6dbdf9@houat
2025-06-27spi: dt-bindings: add nxp,lpc3220-spi.yamlFrank Li
Add lpc3220 spi controller binding doc to fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: /ahb/apb/spi@20088000: failed to match any schema with compatible: ['nxp,lpc3220-spi'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250625215255.2640538-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-26dt-bindings: net: wireless: ath11k-pci: describe firmware-name propertyMiaoqing Pan
Introduce 'firmware-name' property to allow end-users and/or integrators to decide which usecase-specific firmware to run on the WCN6855. This is necessary due to resource limitations such as memory capacity and CPU capability, or performance and power optimization for different application scenarios. Two firmwares are supported: 'WCN6855/hw2.0' and 'WCN6855/hw2.0/nfa765'. The former is the default firmware, suitable for most WiFi 6 STA functions. The latter adds support for commercial-quality SAP and optimizes power consumption for IoT applications. Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250522013444.1301330-2-miaoqing.pan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-26dt-bindings: net: wireless: ath9k: add WIFI bindingsRosen Penev
These are for the wireless chips that come built in with various Atheros/QCA SoCs. dts wise, the difference between pcie and the wmac is AHB > PCIE > WIFI AHB > WIFI Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250609030851.17739-4-rosenp@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-26Merge tag 'devicetree-fixes-for-6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were applied for nios2, but never sent upstream. - Fix extra '/' in fsl,ls1028a-reset '$id' path - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref. * tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Convert altr,uart-1.0 to DT schema dt-bindings: serial: Convert altr,juart-1.0 to DT schema dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
2025-06-26dt-bindings: iio: adc: ad7768-1: add trigger-sources propertyJonathan Santos
In addition to GPIO synchronization, The AD7768-1 also supports synchronization over SPI, which use is recommended when the GPIO cannot provide a pulse synchronous with the base MCLK signal. It consists of looping back the SYNC_OUT to the SYNC_IN pin and send a command via SPI to trigger the synchronization. Introduce the 'trigger-sources' property to enable SPI-based synchronization via SYNC_OUT pin, along with additional optional entries for GPIO3 and DRDY pins. Also create #trigger-source-cells property to differentiate the trigger sources provided by the ADC. To improve readability, create a adi,ad7768-1.h header with the macros for the cell values. While at it, add description to the interrupts property. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: David Lechner <dlechner@baylirbe.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/713fd786010c75858700efaec8bb285274e7057e.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: ad7768-1: Document GPIO controllerJonathan Santos
The AD7768-1 ADC exports four bidirectional GPIOs accessible via register map. Document GPIO properties necessary to enable GPIO controller for this device. Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/2ac34fc1e0b02886073ae0bb196c7e8d4d442c3f.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: ad7768-1: document regulator provider propertyJonathan Santos
The AD7768-1 provides a buffered common-mode voltage output on the VCM pin that can be used to bias analog input signals. Add regulators property to enable the use of the VCM output, referenced here as vcm-output, by any other device. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/33c02a1fb9d839f62da5237f9476ccbf14271b6d.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: trigger-source: add generic GPIO trigger sourceJonathan Santos
Inspired by pwm-trigger, create a new binding for using a GPIO line as a trigger source. Link: https://lore.kernel.org/linux-iio/20250207-dlech-mainline-spi-engine-offload-2-v8-3-e48a489be48c@baylibre.com/ Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/c4a3a7c828c711b439d1893271b8376823176ea6.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26dt-bindings: iio: adc: add ad7405Pop Ioan Daniel
Add devicetree bindings for ad7405/adum770x family. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-5-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26dt-bindings: interrupt-controller: Add MIPS P8700 aclint-sswiVladimir Kondratiev
Add ACLINT-SSWI variant for the MIPS P8700 SoC. This CPU has a SSWI device compliant with the RISC-V draft spec (see [1]). CPU indexes on this platform are not continuous, instead it uses bit-fields to encode hart,core,cluster numbers, thus the DT property "riscv,hart-indexes" is mandatory for it. Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/all/20250612143911.3224046-4-vladimir.kondratiev@mobileye.com Link: https://github.com/riscvarchive/riscv-aclint [1]
2025-06-26dt-bindings: net: ti: k3-am654-cpsw-nuss: update phy-mode in exampleMatthias Schiffer
k3-am65-cpsw-nuss controllers have a fixed internal TX delay, so RXID mode is not actually possible and will result in a warning from the driver going forward. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/f9b5e84fcaf565506ed86cf1838444c2bc47334f.1750756583.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-31 18:44:56 +0000